Dichloro(η6-p-cymene)(P,P-diphenyl-N-propyl-phosphinous amide-κP)ruthenium(II)

The title compound, i.e., [RuCl2(η6-p-cymene)(PPh2NHnPr)] (2), was obtained in a 71% yield by reacting a toluene solution of the chlorophosphine complex [RuCl2(η6-p-cymene)(PPh2Cl)] (1) with two equivalents of n-propylamine at room temperature. The aminophosphine complex 2 was characterized by elemental analysis, multinuclear NMR (31P{1H}, 1H and 13C{1H}) and IR spectroscopy. In addition, its catalytic behavior in the hydration of benzonitrile was briefly explored.

Hydration of Aliphatic Nitriles Catalyzed by an Osmium Polyhydride: Evidence for an Alternative Mechanism

The hexahydride OsH₆(PⁱPr₃)₂ competently catalyzes the hydration of aliphatic nitriles to amides. The main metal species under the catalytic conditions are the trihydride osmium(IV) amidate derivatives OsH₃{κ²-N,O-[HNC(O)R]}(PⁱPr₃)₂, which have been isolated and fully characterized for R = ⁱPr and ^tBu. The rate of hydration is proportional to the concentrations of the catalyst precursor, nitrile, and water. When these experimental findings and density functional theory calculations are combined, the mechanism of catalysis has been established. Complexes OsH₃{κ²-N,O-[HNC(O)R]}(PⁱPr₃)₂ dissociate the carbonyl group of the chelate to afford κ¹-N-amidate derivatives, which coordinate the nitrile. The subsequent attack of an external water molecule to both the C(sp) atom of the nitrile and the N atom of the amidate affords the amide and regenerates the κ¹-N-amidate catalysts. The attack is concerted and takes place through a cyclic six-membered transition state, which involves C_nitrile···O–H···N_amidate interactions. Before the attack, the free carbonyl group of the κ¹-N-amidate ligand fixes the water molecule in the vicinity of the C(sp) atom of the nitrile.

The hexahydride complex OsH₆(PⁱPr₃)₂ competently catalyzes the hydration of aliphatic nitriles to amides. Isolation of the main metal species under the catalytic conditions, kinetics of hydration, and density functional theory calculations support an alternative mechanism to those previously reported.

Ru(ii)- and Ru(iv)-dmso complexes catalyze efficient and selective aqueous-phase nitrile hydration reactions under mild conditions

Synthesis and characterization of new water-soluble Ru(ii)- and Ru(iv)-dmso complexes are reported which show good efficiency and selectivity for aqueous-phase nitrile hydration at 60 °C in air. Best performance is achieved using complex [RuCl2(dmso)3(NH3)]·PF6·Cl (3).

Catalytic hydration of cyanamides with phosphinous acid-based ruthenium(ii) and osmium(ii) complexes: scope and mechanistic insights

The catalytic hydration of cyanamides to ureas has been accomplished employing, for the first time, homogeneous catalysts, i.e. the phosphinous acid complexes [MCl₂(η⁶-p-cymene)(PMe₂OH)] (M = Ru, Os).

Hydrosoluble Cu(i)-DAPTA complexes: synthesis, characterization, luminescence thermochromism and catalytic activity for microwave-assisted three-component azide-alkyne cycloaddition click reaction

New hydrosoluble and air-stable Cu(i) halide compounds, viz. [CuX(DAPTA)3] (1) and (2), and [Cu(μ-X)(DAPTA)2]2 (3) and (4) (X = Br or I, in this order), have been prepared by reacting Cu(i) halide (i.e., bromide or iodide) with 3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane (DAPTA) under mild conditions. They represent the first examples of Cu(i) halide complexes bearing the DAPTA ligand, which have been fully characterized by elemental analysis, IR, 1H, 13C{1H} and 31P{1H} NMR spectroscopies, ESI-MS+ and, for 4, also by single-crystal X-ray diffraction (SCXRD) analyses. Complexes 1-4 are efficient catalysts for the one-pot microwave assisted three-component (terminal alkyne, organic halide and NaN3) Huisgen cycloaddition reaction in aqueous media to afford the corresponding disubstituted triazoles. The catalysis proceeds with a broad alkyne substrate scope and according to "click rules". Photophysical studies of compound 4 showed an unusual reversible thermochromic behaviour exhibiting a blue emission at 298 K due to the halide-to-ligand charge transfer (3XLCT) and a red emission at 77 K because of the {Cu2I2} unit.

Water-soluble superbulky (η6-p-cymene) ruthenium(ii) amine: an active catalyst in the oxidative homocoupling of arylboronic acids and the hydration of organonitriles

Water-soluble superbulky (η⁶-p-cymene) ruthenium(ii) amine complex mediated oxidative homocoupling of arylboronic acids and the hydration of organonitriles are reported.

Hemilability-Driven Water Activation: A NiII Catalyst for Base-Free Hydration of Nitriles to Amides

The Ni^II complex 1 containing pyridyl- and hydroxy-functionalized N-heterocyclic carbenes (NHCs) is synthesized and its catalytic utility for the selective nitrile hydration to the corresponding amide under base-free conditions is evaluated. The title compound exploits a hemilabile pyridyl unit to interact with a catalytically relevant water molecule through hydrogen-bonding and promotes a nucleophilic water attack to the nitrile. A wide variety of nitriles is hydrated to the corresponding amides including the pharmaceutical drugs rufinamide, Rifater, and piracetam. Synthetically challenging α-hydroxyamides are accessed from cyanohydrins under neutral conditions. Related catalysts that lack the pyridyl unit (i.e., compounds 2 and 4) are not active whereas those containing both the pyridyl and the hydroxy or only the pyridyl pendant (i.e., compounds 1 and 3) show substantial activity. The linkage isomer 1' where the hydroxy group is bound to the metal instead of the pyridyl group was isolated under different crystallization conditions insinuating a ligand hemilabile behavior. Additional pK_a measurements reveal an accessible pyridyl unit under the catalytic conditions. Kinetic studies support a ligand-promoted nucleophilic water addition to a metal-bound nitrile group. This work reports a Ni-based catalyst that exhibits functional hemilability for hydration chemistry.

Iminophosphanes: Synthesis, Rhodium Complexes, and Ruthenium(II)-Catalyzed Hydration of Nitriles

Highly stable iminophosphanes, obtained from alkylating nitriles and reaction of the resulting nitrilium ions with secondary phosphanes, were explored as tunable P-monodentate and 1,3-P,N bidentate ligands in rhodium complexes. X-ray crystal structures are reported for both κ¹ and κ² complexes with the counterion in one of them being an unusual anionic coordination polymer of silver triflate. The iminophosphane-based ruthenium(II)-catalyzed hydration of benzonitrile in 1,2-dimethoxyethane (180 °C, 3 h) and water (100 °C, 24 h) and under solvent free conditions (180 °C, 3 h) results in all cases in the selective formation of benzamide with yields of up to 96%, thereby outperforming by far the reactions in which the common 2-pyridyldiphenylphosphane is used as the 1,3-P,N ligand.

Ru(ii)-dmso complexes containing azole-based ligands: synthesis, linkage isomerism and catalytic behaviour

Photochemical ligand substitution in acetonitrile and chloroform, together with the kinetics of dmso linkage isomerization, are investigated in new Ru(ii)-dmso complexes that are also active as nitrile hydration catalysts.

A mild hydration of nitriles catalysed by copper(ii) acetate

Amides are prepared in good yields from nitriles catalysed by a combination of copper acetate and N,N-diethylhydroxylamine

Bis(allyl)-ruthenium(iv) complexes with phosphinous acid ligands as catalysts for nitrile hydration reactions

The preparation of bis(allyl)-Ru(iv) complexes with phosphinous acid ligands is presented, as well as their application as catalysts in the base-free hydration of organonitriles in water.

Unmasking the Action of Phosphinous Acid Ligands in Nitrile Hydration Reactions Catalyzed by Arene-Ruthenium(II) Complexes

The catalytic hydration of benzonitrile and acetonitrile has been studied by employing different arene-ruthenium(II) complexes with phosphinous (PR2OH) and phosphorous acid (P(OR)2OH) ligands as catalysts. Marked differences in activity were found, depending on the nature of both the P-donor and η(6)-coordinated arene ligand. Faster transformations were always observed with the phosphinous acids. DFT computations unveiled the intriguing mechanism of acetonitrile hydration catalyzed by these arene-ruthenium(II) complexes. The process starts with attack on the nitrile carbon atom of the hydroxyl group of the P-donor ligand instead of on a solvent water molecule, as previously suggested. The experimental results presented herein for acetonitrile and benzonitrile hydration catalyzed by different arene-ruthenium(II) complexes could be rationalized in terms of such a mechanism.

Direct oxidative esterification of alcohols and hydration of nitriles catalyzed by a reusable silver nanoparticle grafted onto mesoporous polymelamine formaldehyde (AgNPs@mPMF)

Oxidative esterification and hydration of nitriles are catalyzed by a newly synthesized AgNPs@mPMF. The catalyst is well characterized and reusable.

Bio-inspired nitrile hydration by peptidic ligands based on L-cysteine, L-methionine or L-penicillamine and pyridine-2,6-dicarboxylic acid

Nitrile hydratase (NHase, EC 4.2.1.84) is a metalloenzyme which catalyses the conversion of nitriles to amides. The high efficiency and broad substrate range of NHase have led to the successful application of this enzyme as a biocatalyst in the industrial syntheses of acrylamide and nicotinamide and in the bioremediation of nitrile waste. Crystal structures of both cobalt(III)- and iron(III)-dependent NHases reveal an unusual metal binding motif made up from six sequential amino acids and comprising two amide nitrogens from the peptide backbone and three cysteine-derived sulfur ligands, each at a different oxidation state (thiolate, sulfenate and sulfinate). Based on the active site geometry revealed by these crystal structures, we have designed a series of small-molecule ligands which integrate essential features of the NHase metal binding motif into a readily accessible peptide environment. We report the synthesis of ligands based on a pyridine-2,6-dicarboxylic acid scaffold and L-cysteine, L-S-methylcysteine, L-methionine or L-penicillamine. These ligands have been combined with cobalt(III) and iron(III) and tested as catalysts for biomimetic nitrile hydration. The highest levels of activity are observed with the L-penicillamine ligand which, in combination with cobalt(III), converts acetonitrile to acetamide at 1.25 turnovers and benzonitrile to benzamide at 1.20 turnovers.