Palladium(II)-Mediated Assembly of Biotinylated Ion Channels

A reversible single-molecule ligand-gating ion transportation switch of ON–OFF–ON type through a photoresponsive pillar[6]arene channel complex

A reversible pseudo-single-ligand-gated ion transportation switch of ON–OFF–ON type was achieved through host–guest complexation with pillar[6]arene (P[6]) as the ion channel, and a photoresponsive azobenzene as the dual-role (open and close) ligand.

A reversible pseudo-single-ligand-gated ion transportation switch of ON–OFF–ON type through pillar[6]arene and photoresponsive azobenzene as dual-role ligand.

Artificial Signal Transduction

Communication between and inside cells as well as their response to external stimuli relies on elaborated systems of signal transduction. They all require a directional transmission across membranes, often realized by primary messenger docking onto external receptor units and subsequent internalization of the signal in form of a released second messenger. This in turn starts a cascade of events which ultimately control all functions of the living cell. Although signal transduction is a fundamental biological process realized by supramolecular recognition and multiplication events with small molecules, chemists have just begun to invent artificial models which allow to study the underlying rules, and one day perhaps to rescue damaged transduction systems in nature. This review summarizes the exciting pioneering efforts of chemists to create simple models for the basic principles of signal transduction across a membrane. It starts with first attempts to establish molecular recognition events on liposomes with embedded receptor amphiphiles and moves on to simple transmembrane signaling across lipid bilayers. More elaborated systems step by step incorporate more elements of cell signaling, such as primary and secondary messenger or a useful cellular response such as cargo release.

Switchable foldamer ion channels with antibacterial activity

Synthetic ion channels may have applications in treating channelopathies and as new classes of antibiotics, particularly if ion flow through the channels can be controlled. Here we describe triazole-capped octameric α-aminoisobutyric acid (Aib) foldamers that "switch on" ion channel activity in phospholipid bilayers upon copper(ii) chloride addition; activity is "switched off" upon copper(ii) extraction. X-ray crystallography showed that CuCl₂ complexation gave chloro-bridged foldamer dimers, with hydrogen bonds between dimers producing channels within the crystal structure. These interactions suggest a pathway for foldamer self-assembly into membrane ion channels. The copper(ii)-foldamer complexes showed antibacterial activity against B. megaterium strain DSM319 that was similar to the peptaibol antibiotic alamethicin, but with 90% lower hemolytic activity.

Supramolecular Chemistry in the Biomembrane

The combination of supramolecular functional systems with biomolecular chemistry has been a fruitful exercise for decades, leading to a greater understanding of biomolecules and to a great variety of applications, for example, in drug delivery and sensing. Within these developments, the phospholipid bilayer membrane, surrounding live cells, with all its functions has also intrigued supramolecular chemists. Herein, recent efforts from the supramolecular chemistry community to mimic natural functions of lipid membranes, such as sensing, molecular recognition, membrane fusion, signal transduction, and gated transport, are reviewed.

A reversible ion transportation switch of ON–OFF–ON type by a ligand-gated calix[6]arene channel

Calix[6]arene (CX6) was found to be an efficient ion transmembrane channel, which could be blocked by methylene blue (MB) through host–guest interactions.

The Role of Terminal Functionality in the Membrane and Antibacterial Activity of Peptaibol-Mimetic Aib Foldamers

Peptaibols are peptide antibiotics that typically feature an N-terminal acetyl cap, a C-terminal aminoalcohol, and a high proportion of α-aminoisobutyric acid (Aib) residues. To establish how each feature might affect the membrane-activity of peptaibols, biomimetic Aib foldamers with different lengths and terminal groups were synthesised. Vesicle assays showed that long foldamers (eleven Aib residues) with hydrophobic termini had the highest ionophoric activity. C-terminal acids or primary amides inhibited activity, while replacement of an N-terminal acetyl with an azide group made little difference. Crystallography showed that N₃ Aib₁₁ CH₂ OTIPS folded into a 3₁₀ helix 2.91 nm long, which is close to the bilayer hydrophobic width. Planar bilayer conductance assays showed discrete ion channels only for N-acetylated foldamers. However long foldamers with hydrophobic termini had the highest antibacterial activity, indicating that ionophoric activity in vesicles was a better indicator of antibacterial activity than the observation of discrete ion channels.

Thermally-induced lateral assembly of a PEG-containing amphiphile triggering vesicle budding

A macrocyclic amphiphile consisting of a thermo-responsive octaethylene glycol chain with hydrophobic aromatic and aliphatic units undergoes lateral self-assembly in a liquid-disordered-state phospholipid bilayer membrane upon heating, which further leads to vesicle budding.

Aqueous dispersions of nanostructures formed through the self-assembly of iminolipids with exchangeable hydrophobic termini

The addition of amines to an aldehyde surfactant, which was designed to be analogous to didodecyldimethylammonium bromide, gave exchangeable "iminolipids" that self-assembled to give stable aqueous dispersions of nano-sized vesicles. For example, sonication of suspensions of the n-hexylamine-derived iminolipid gave vesicles 50 to 200 nm in diameter that could encapsulate a water-soluble dye. The iminolipids could undergo dynamic exchange with added amines, and the resulting equilibrium constants (K_rel) were quantified by ¹H NMR spectroscopy. In the absence of lipid self-assembly, in CDCl₃, the assayed primary amines gave very similar K_rel values. However in D₂O the value of K_rel generally increased with increasing amine hydrophobicity, consistent with partitioning into a self-assembled bilayer. Amines with aromatic groups showed significantly higher values of K_rel in D₂O compared to similarly hydrophobic alkylamines, suggesting that π-π interactions favor lipid self-assembly. Given this synergistic relationship, π-rich pyrenyliminolipids were created and used to exfoliate graphite, leading to aqueous dispersions of graphene flakes that were stable over several months.

Functionalized hydrazide macrocycle ion channels showing pH-sensitive ion selectivities

The protonation and deprotonation of multiple amines and carboxyls in channels change the charge distribution, which leads to pH-sensitive ion selectivity.

Helical peptaibol mimics are better ionophores when racemic than when enantiopure

Helical peptide foldamers rich in α-aminoisobutyric acid (Aib) act as peptaibol-mimicking ionophores in the phospholipid bilayers of artificial vesicles. Racemic samples of these foldamers are more active than their enantiopure counterparts, which was attributed to differing propensities to form aggregates with crystal-like features in the bilayer.

Length-Dependent Formation of Transmembrane Pores by 310-Helical α-Aminoisobutyric Acid Foldamers

The synthetic biology toolbox lacks extendable and conformationally controllable yet easy-to-synthesize building blocks that are long enough to span membranes. To meet this need, an iterative synthesis of α-aminoisobutyric acid (Aib) oligomers was used to create a library of homologous rigid-rod 3₁₀-helical foldamers, which have incrementally increasing lengths and functionalizable N- and C-termini. This library was used to probe the inter-relationship of foldamer length, self-association strength, and ionophoric ability, which is poorly understood. Although foldamer self-association in nonpolar chloroform increased with length, with a ∼14-fold increase in dimerization constant from Aib₆ to Aib₁₁, ionophoric activity in bilayers showed a stronger length dependence, with the observed rate constant for Aib₁₁ ∼70-fold greater than that of Aib₆. The strongest ionophoric activity was observed for foldamers with >10 Aib residues, which have end-to-end distances greater than the hydrophobic width of the bilayers used (∼2.8 nm); X-ray crystallography showed that Aib₁₁ is 2.93 nm long. These studies suggest that being long enough to span the membrane is more important for good ionophoric activity than strong self-association in the bilayer. Planar bilayer conductance measurements showed that Aib₁₁ and Aib₁₃, but not Aib₇, could form pores. This pore-forming behavior is strong evidence that Aib_m (m ≥ 10) building blocks can span bilayers.

Biological fluorination from the sea: discovery of a SAM-dependent nucleophilic fluorinating enzyme from the marine-derived bacterium Streptomyces xinghaiensis NRRL B24674

The first ever marine originated fluorinating enzyme, which promises to be useful in biotransformation and synthetic biology, is described.

A dual-channel detection of mercuric ions using a label free G-quadruplex-based DNAzyme molecule

We have constructed a ‘turn-off’ and label free bio-sensor using a DNAzyme molecule.

Nature's lessons in design: nanomachines to scaffold, remodel and shape membrane compartments

Our understanding of the membrane sculpting capabilities of proteins from experimental model systems could be used to construct functional compartmentalised architectures for the engineering of synthetic cells.

Fructose controlled ionophoric activity of a cholate-boronic acid

Wulff-type boronic acids have been shown to act as ionophores at pH 8.2 by transporting Na(+) through phospholipid bilayers. A cholate-boronic acid conjugate was synthesised and shown to be an ionophore, although the hydroxyl-lined face of the cholate moiety did not enhance ion transport. Mechanistic studies suggested a carrier mechanism for Na(+) transport. The addition of fructose (>5 mM) strongly inhibited ionophoric activity of the cholate-boronic acid conjugate, mirrored by a strong decrease in the ability of this compound to partition into an organic phase. Modelling of the partitioning and ion transport data, using a fructose/boronic acid binding constant measured at pH 8.2, showed a good correlation with the extent of fructose/boronic acid complexation and suggested high polarity fructose/boronic acid complexes are poor ionophores. The sensitivity of ion transport to fructose implies that boronic acid-based antibiotic ionophores with activity modulated by polysaccharides in the surrounding environment may be accessible.

Supramolecular approaches to combining membrane transport with adhesion

Cells carefully control the transit of compounds through their membranes using “gated” protein channels that respond to chemical stimuli. Connexin gap junctions, which are high conductance cell-to-cell channels, are a remarkable class of “gated” channel with multiple levels of assembly. A gap junction between adhering cells comprises two half-channels in each cell membrane that adhere to each other to form a continuous cell-to-cell channel. Each half-channel is a hexameric assembly of six protein transmembrane subunits. These gap junctions display both intramembrane assembly and intermembrane assembly, making them an attractive target for biomimetic studies. Although many examples of self-assembled channels have been developed, few can also mediate intermembrane adhesion. Developing systems that combine membrane adhesion with controlled transit across the membrane would not only provide a better understanding of self-assembly in and around the membrane, but would also provide a route towards smart biomaterials, targeted drug delivery and an interface with nanotechnology.

This Account describes our biomimetic approaches to combining membrane adhesion with membrane transport, using both self-assembled “sticky” pores and “sticky” nanoparticles to trigger transit across membranes. This combination links both fundamental and applied research, acting as a bridge between molecular level assembly and the formation of functional biomaterials. The ultimate goal is to create complex self-assembled systems in biological or biomimetic environments that can both interface with cells and transport compounds across bilayers in response to remote chemical or electromagnetic signals. Our research in this area started with fundamental studies of intramembrane and intermembrane self-assembly, building upon previously known channel-forming compounds to create self-assembled channels that were switchable or able to mediate vesicle–vesicle adhesion. Subsequently, nanoparticles with a “sticky” coating were used to mediate adhesion between vesicles. Combining these adhesive properties with the unique characteristics of nanosized magnetite allowed a noninvasive magnetic signal to trigger transport of compounds out of magnetic nanoparticle-vesicle assemblies. Adding an extravesicular matrix produced new responsive biomaterials for use in tissue engineering. These biomaterials can be magnetically patterned and can deliver drugs upon receipt of a magnetic signal, allowing spatiotemporal control over cellular responses.

Supramolecular self-assemblies as functional nanomaterials

In this review, we survey the diversity of structures and functions which are encountered in advanced self-assembled nanomaterials. We highlight their flourishing implementations in three active domains of applications: biomedical sciences, information technologies, and environmental sciences. Our main objective is to provide the reader with a concise and straightforward entry to this broad field by selecting the most recent and important research articles, supported by some more comprehensive reviews to introduce each topic. Overall, this compilation illustrates how, based on the rules of supramolecular chemistry, the bottom-up approach to design functional objects at the nanoscale is currently producing highly sophisticated materials oriented towards a growing number of applications with high societal impact.

Synthetic ion channels

The objective of this historical review is to recall the development of the field of synthetic ion channels over the past three decades. The most inspiring and influential breakthroughs with regard to structure and function are brought together to give the general reader an easily accessible understanding of the field. Pioneering work in the 1980s is followed by the golden age in the 1990s with structures emphasizing crown ethers, calixarenes, and peptide mimetics. Following the emergence of questions concerning specific functions such as ion selectivity, voltage gating, ligand gating and blockage, and with π-stacks, metal-organic scaffolds, and DNA origami, a new wave of innovative structures has emerged. The perspectives outline promising directions and major challenges waiting to be addressed.

Metal-organic transmembrane nanopores

A stable tetraporphyrin metallacycle with Re(I) corners (1) is capable of forming nanopores in a liposomial membrane, provided that the porphyrin units are properly functionalized with peripheral carboxylic acid residues that, by establishing an hydrogen bond network, allow the formation of dimers that span the depth of the membrane.

Ion permeation by a folded multiblock amphiphilic oligomer achieved by hierarchical construction of self-assembled nanopores

A multiblock amphiphilic molecule 1, with a tetrameric alternating sequence of hydrophilic and hydrophobic units, adopts a folded structure in a liposomal membrane like a multipass transmembrane protein, and is able to transport alkali metal cations through the membrane. Hill's analysis and conductance measurements, analyzed by the Hille equation, revealed that the tetrameric assembly of 1 forms a 0.53 nm channel allowing for permeation of cations. Since neither 3, bearing flexible hydrophobic units and forming no stacked structures in the membrane, nor 2, a monomeric version of 1, is able to transport cations, the folded conformation of 1 in the membrane is likely essential for realizing its function. Thus, function and hierarchically formed higher-order structures of 1, is strongly correlated with each other like proteins and other biological macromolecules.

Pd(II)-mediated assembly of porphyrin channels in bilayer membranes

A membrane-spanning bis(meso-3-pyridyl) porphyrin 1 has been synthesized, embedded in EYPC vesicles, and upon Pd(II) addition has been shown to form ionophores that allow the passage of anionic 5/6-carboxyfluorescein through membranes. The geometric matching of bis(meso-3-pyridyl) porphyrin 1 and trans-Pd(II) was designed to give a cyclic porphyrin trimer [PdCl(2)(1)](3). However, solution-phase studies showed that PdCl(2)(PhCN)(2) cross linked 1 into linear oligomers at porphyrin concentrations above 10 mM, although the formation of cyclic species was inferred from studies at concentrations below 2 μM. Fluorescence titrations showed that embedding porphyrin 1 in bilayers greatly reduced its affinity for Pd(II), but the combination of porphyrin 1 and Pd(II) gave an ionophoric species that increased the rate of 5/6-carboxyfluorescein (5/6-CF) transit through the phospholipid bilayer 12-fold. A maximum in the 5/6-CF release rate was observed at a Pd(II) concentration of 4 μM, and the application of a solution-phase binding model to the membrane phase showed that this peak in ionophoric activity corresponded to the greatest extent of porphyrin oligomerization. Further studies suggested these Pd(II)/porphyrin oligomers transported 5/6-CF via a channel mechanism.