Synthesis of Fe3O4@Phenol Formaldehyde Resin Core-Shell Nanospheres Loaded with Au Nanoparticles as Magnetic FRET Nanoprobes for Detection of Thiols in Living Cells

SMART RHESINs-Superparamagnetic Magnetite Architecture Made of Phenolic Resin Hollow Spheres Coated with Eu(III) Containing Silica Nanoparticles for Future Quantitative Magnetic Particle Imaging Applications

Magnetic particle imaging (MPI) is a powerful and rapidly growing tomographic imaging technique that allows for the non-invasive visualization of superparamagnetic nanoparticles (NPs) in living matter. Despite its potential for a wide range of applications, the intrinsic quantitative nature of MPI has not been fully exploited in biological environments. In this study, a novel NP architecture that overcomes this limitation by maintaining a virtually unchanged effective relaxation (Brownian plus Néel) even when immobilized is presented. This superparamagnetic magnetite architecture made of phenolic resin hollow spheres coated with Eu(III) containing silica nanoparticles (SMART RHESINs) was synthesized and studied. Magnetic particle spectroscopy (MPS) measurements confirm their suitability for potential MPI applications. Photobleaching studies show an unexpected photodynamic due to the fluorescence emission peak of the europium ion in combination with the phenol formaldehyde resin (PFR). Cell metabolic activity and proliferation behavior are not affected. Colocalization experiments reveal the distinct accumulation of SMART RHESINs near the Golgi apparatus. Overall, SMART RHESINs show superparamagnetic behavior and special luminescent properties without acute cytotoxicity, making them suitable for bimodal imaging probes for medical use like cancer diagnosis and treatment. SMART RHESINs have the potential to enable quantitative MPS and MPI measurements both in mobile and immobilized environments.

Magnetic quantum dots barcodes using Fe3O4/TiO2 with weak spectral absorption in the visible region for high-sensitivity multiplex detection of tumor markers

Magnetic quantum dot (QD) barcode holds great potential for automatic suspension array and rapid point-of-care detection since it enables simultaneous target encoding, enrichment and separation. However, a serious obstacle to enhancing the encoding capacity of magnetic QD microbeads (MBs) is the fluorescence quenching of magnetic nanoparticles (MNPs) to quantum dots (QDs) in the visible wavelength range due to the broad and strong optical absorption spectrum of MNPs. Here, we report Fe₃O₄/TiO₂ core/shell MNPs and CdSe/ZnS QDs for the construction of dual-function magnetic QD barcodes. Fe₃O₄/TiO₂ MNPs can significantly inhibit fluorescence quenching because the weak absorption of visible light by the TiO₂. The two-dimension barcode library of 30 magnetic QD barcodes was constructed based on Fe₃O₄/TiO₂ MNPs and CdSe/ZnS QDs. Moreover, the magnetic QD barcodes showed high sensitivity for the multiplex detection of four tumor markers, cancer antigen 125 (CA125), cancer antigen 199 (CA199), alpha-fetoprotein (AFP), and neuron specific enolase (NSE) with detection limits of 0.89 KU/L, 0.72 KU/L, 0.05 ng/mL, and 0.15 ng/mL, respectively. This bifunctional magnetic QD barcodes are promising for automatic high-sensitivity multiplex bioassay.

Use of metal nanoparticles for preconcentration and analysis of biological thiols

Metal nanoparticles (NPs) exhibit several unique physicochemical properties, including redox activity, surface plasmon resonance, ability to quench fluorescence, biocompatibility, or a high surface-to-volume ratio. They are being increasingly used in analysis and preconcentration of thiol containing compounds, because they are able to spontaneously form a stable Au/Ag/Cu-S dative bond. They thus find wide application in environmental and particularly in medical science, especially in the analysis of biological thiols, the endogenous compounds that play a significant role in many biological systems. In this review article, we provide an overview of various types of NPs that have been applied in analysis and preconcentration of biological thiols, mainly in human biological fluids. We first discuss shortly the types of NPs and their synthesis, properties, and their ability to interact with thiol compounds. Then we outline the sample preconcentration and analysis methods that were used for this purpose with special emphasis on optical, electrochemical, and separation techniques.

Synthesis of Mesoporous SiO2 coating containing chlorine phenol formaldehyde resin (Cl-PFR) composites for effective fingerprint detection

As a kind of non-metals fluorescent reagent, the containing chlorine phenol-formaldehyde resin (Cl-PFR) nanoparticles (NPs) were synthesized with the facile method. The as-synthesized Cl-PFR nanoparticles can emit strong green fluorescence emission under the irradiation of 365nm UV light. Since mesoporous silica nanoparticles (MSNs) NPs have a large specific area, strong adsorption, and uniform dispersion, the MSN coating Cl-PFR composites were prepared by mixing Cl-PFR and MSN NPs together. Thus, the as-synthesized multifunctional composites combine the advantages of green fluorescence Cl-PFR, and strong adhesion MSN was applied to detect the potential fingerprint. Different bases fingerprints (glass, paper, aluminum sheets, rough stones, tape) can be clearly observed in the presence of the Cl-PFR@MSN-NH₂ composites. Furthermore, the aging three months and washed with water several times fingerprint can also be clearly displayed with the multifunctional composites. This study provided a simple, economical, and non-toxic fluorescent reagent for the application in fingerprint detection.

A novel design of multiple ligands for ultrasensitive colorimetric chemosensor of glutathione in plasma sample

In this study, we developed a novel colorimetric chemosensor for selective and sensitive recognition of Glutathione (GSH) using a simple binary mixture of commercially accessible and inexpensive metal receptors with names, Bromo Pyrogallol Red (BPR) and Xylenol Orange (XO). This procedure is based on the synergistic coordination of BPR and XO with cerium ion (Ce3+) for the recognition of GSH over other available competitive amino acids (AAs) especially thiol species in aqueous media. Generally, cysteine (Cys) and homocysteine (hCys) can seriously interfere with the detection of GSH among common biological species because they possess similar chemical behavior. Using all the information from 1HNMR and FT-IR studies, the proposed interaction is presented in which GSH acts as a tri-dentate ligand with three N donor atoms in conjunction with BPR and XO as mono and bi-dentate ligands respectively. This approach opens a path for selective detection of other AAs by argumentatively selecting the ensemble of mixed organic ligands from commercially available reagents, thereby eliminating the need for developing synthetic receptors, sample preparation, organic solvent mixtures, and expensive equipment. Evaluating the feasibility of the existing method was led to the determination of GSH in human plasma samples.

Light-Interacting iron-based nanomaterials for localized cancer detection and treatment

To improve the prognosis of cancer patients, methods of local cancer detection and treatment could be implemented. For that, iron-based nanomaterials (IBN) are particularly well-suited due to their biocompatibility and the various ways in which they can specifically target a tumor, i.e. through passive, active or magnetic targeting. Furthermore, when it is needed, IBN can be associated with well-known fluorescent compounds, such as dyes, clinically approved ICG, fluorescent proteins, or quantum dots. They may also be excited and detected using well-established optical methods, relying on scattering or fluorescent mechanisms, depending on whether IBN are associated with a fluorescent compound or not. Systems combining IBN with optical methods are diverse, thus enabling tumor detection in various ways. In addition, these systems provide a wealth of information, which is inaccessible with more standard diagnostic tools, such as single tumor cell detection, in particular by combining IBN with near-field scanning optical microscopy, dark-field microscopy, confocal microscopy or super-resolution microscopy, or the highlighting of certain dynamic phenomena such as the diffusion of a fluorescent compound in an organism, e.g. using fluorescence lifetime imaging, fluorescence resonance energy transfer, fluorescence anisotropy, or fluorescence tomography. Furthermore, they can in some cases be complemented by a therapeutic approach to destroy tumors, e.g. when the fluorescent compound is a drug, or when a technique such as photo-thermal or photodynamic therapy is employed. This review brings forward the idea that iron-based nanomaterials may be associated with various optical techniques to form a commercially available toolbox, which can serve to locally detect or treat cancer with a better efficacy than more standard medical approaches. STATEMENT OF SIGNIFICANCE: New tools should be developed to improve cancer treatment outcome. For that, two closely-related aspects deserve to be considered, i.e. early tumor detection and local tumor treatment. Here, I present various types of iron-based nanomaterials, which can achieve this double objective when they interact with a beam of light under specific and accurately chosen conditions. Indeed, these materials are biocompatible and can be used/combined with most standard microscopic/optical methods. Thus, these systems enable on the one hand tumor cell detection with a high sensitivity, i.e. down to single tumor cell level, and on the other hand tumor destruction through various mechanisms in a controlled and localized manner by deciding whether or not to apply a beam of light and by having these nanomaterials specifically target tumor cells.

Turn-on fluorescent sensor for the detection of glucose using manganese dioxide-phenol formaldehyde resin nanocomposite

Monitoring blood glucose has attracted considerable attention because diabetes mellitus is a global public health problem. Herein, we reported a turn-on fluorescence detection strategy based on manganese dioxide (MnO₂)-phenol formaldehyde resin (PFR) nanocomposite for rapid, sensitive, and selective detection of glucose levels in human blood. In this biosensing system, MnO₂ nanoshell on the PFR nanoparticle surfaces serve as a quencher. PFR fluorescence can make a recovery in the presence of H₂O₂, reducing MnO₂ to Mn²⁺. The sensor shows a linear range from 50nM to 90μM with a low detection limit of 20nM for H₂O₂ detection. Thus, the glucose can be detected on the basis of the enzymatic conversion of glucose by glucose oxidase to produce H₂O₂. This method exhibits a wide linear range from 5μM to 1mM with a low detection limit of 1.5μM. Because of the excellent photostability offered by PFR, the developed strategy has been successfully applied for the diagnosis of diabetes mellitus in human blood samples. Compared with commercial glucometer, our method showed satisfactory results, indicating the significant reliability. The developed turn-on fluorescent sensor might hold great promise in nanomedicine and bioanalysis.

Current advancements of magnetic nanoparticles in adsorption and degradation of organic pollutants

Nanotechnology is a fast-emerging field and has received applications in almost every field of life. Exploration of new synthetic technologies for size and shape control of nanomaterials is getting immense consideration owing to their exceptional properties and applications. Magnetic nanoparticles (MNPs) are among the most important group of nanoparticles thanks to their diverse applications in medical, electronic, environmental, and industrial sectors. There have been numerous synthetic routes of MNPs including thermal decomposition, co-precipitation, microemulsion, microwave assisted, chemical vapor deposition, combustion synthesis, and laser pyrolysis synthesis. The synthesized MNPs have been successfully applied in medical fields for therapy, bioimaging, drug delivery, and so on. Among environmental aspects, there has been great intimidation of organic pollutants in air and water. Utilization of various wastes as adsorbents has removed 80 to 99.9% of pollutants from contaminated water. MNPs as adsorbents compared to coarse-grained counterparts have seven times higher capacity in removing water pollutants and degrading organic contaminants. This study is focused to introduce and compile various routes of MNP synthesis together with their significant role in water purifications and degradation of organic compounds. The review has compiled recent investigation, and we hope it will find the interest of researchers dealing with nanoparticles and environmental research. Graphical abstract Synthesis and applications of magnetic nanoparticles.

Fluorescent Indicator Displacement Assay: Ultrasensitive Detection of Glutathione and Selective Cancer Cell Imaging

This Research Article reports the development of nanohybrid comprising of anionic carbon dots (ACD) protected gold nanoparticle (GNP). ACD directly cap GNP through its anionic surface functionalization leading to the formation of stable aqueous GNP dispersion. This newly developed ACD-GNP nanohybrid has been thoroughly characterized by different spectroscopic and microscopic techniques. This nanohybrid is successfully employed toward the selective sensing of glutathione (GSH). The mechanism of GSH sensing by this nanosensor is based on the GSH triggered displacement of fluorescent indicator ACD from the GNP surface. Upon capping GNP, intrinsic fluorescence of ACD gets quenched. Addition of GSH displaces the fluorescent indicator ACD from GNP surface and restores the fluorescence signal of ACD. This nanosensor exhibits very high selectivity as well as sensitivity toward glutathione over the other biothiols and can detect as low as 6 nM of GSH. More importantly, selective imaging of the cancer cells over the noncancerous cells was achieved by this ACD-GNP hybrid implying its potential applications in biosensing, as well as in cancer diagnosis.

Luminescence detection of cysteine based on Ag⁺-mediated conformational change of terbium ion-promoted G-quadruplex

In this work, we developed a simple and sensitive method for the detection of cysteine (Cys) by employing terbium ion (Tb(3+))-promoted G-qudraplex (G4/Tb) as a luminescent probe, which is based on Ag(+)-mediated conformational change of G4/Tb. Due to Ag(+) is able to compete with Tb(3+) to bind guanine at G4, the presence of Ag(+) can lead to the formation of G4/Tb-Ag(+) complex and disrupt the structure of G4/Tb. Meanwhile, the binding of Ag(+) with G4/Tb will also cause the alteration of the excited state of G4 and more efficient energy transfer from G4 to Tb(3+), enhancing the luminescence of G4/Tb. However, upon the addition of Cys, Ag(+) will be released from G4/Tb-Ag(+) complex because of the high affinity of Cys to Ag(+). This results in the re-formation of the conformation of G4/Tb and the decrease of the luminescence of G4/Tb. So, Ag(+)-enhanced luminescence of G4/Tb is associated with its conformational transformation. As a luminescent probe for Cys, G4/Tb not only shows excellent selectivity and sensitivity with a detection limit of 20 nM, but also possesses the features of simple preparation, easy reproducibility, and eliminating the interferences from background fluorescence. We envision that the presented strategy might provide new insight into the biosensing applications of lanthanide complex.

Facile synthesis of magnetic resorcinol–formaldehyde (RF) coated carbon nanotubes for methylene blue removal

The CNTs/Fe₃O₄@RF@Au and CNTs/Fe₃O₄@C composites were achieved via the reduction of Au³⁺ by the CNTs/Fe₃O₄@RF composite itself or calcinations in inert atmosphere respectively.

Polymer and Carbon Spheres with an Embedded Shell of Plasmonic Gold Nanoparticles

Gold nanoparticle (AuNP)/resin nanosphere composites have been prepared in a novel process where the resin functions as both the host and reducing agent. Electron tomography showed that the AuNPs are organized into a concentric shell fully embedded in the resin nanospheres. Pyrolysis of the composite spheres afforded microporous N-doped carbon nanospheres with a pseudoshell of embedded AuNPs. These new composites with uncapped plasmonic nanoparticles have excellent potential for biomedical, catalysis, energy storage, and sensing applications.

Core-Shell Ferromagnetic Nanorod Based on Amine Polymer Composite (Fe3O4@DAPF) for Fast Removal of Pb(II) from Aqueous Solutions

Heavy metal ion removal from wastewater constitutes an important issue in the water treatment industry. Although a variety of nanomaterials have been developed for heavy metal removal via adsorption, the adsorption capacity, removal efficiency, and material recyclability still remain a challenge. Here, we present novel Fe3O4@DAPF core-shell ferromagnetic nanorods (CSFMNRs) for the removal of Pb(II) from aqueous solutions; they were prepared by the facile surface modification of twin-like ferromagnetic Fe3O4 nanorods using a 2,3-diaminophenol and formaldehyde (DAPF)-based polymer. The crystallinity and structure of the Fe3O4 nanorods were confirmed via X-ray diffraction (XRD). Transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) revealed the core-shell morphology and composition of the materials. Pb(II) removal using the prepared Fe3O4@DAPF CSFMNRs was assessed, and comparable adsorption capacities (83.3 mg g(-1)) to the largest value were demonstrated. A thermodynamic study of the adsorption clearly indicated that the adsorption was exothermic and spontaneous. Due to the ferromagnetic properties with a high saturation magnetization value (56.1 emu g(-1)) of the nanorods, the nanorods exhibited excellent reusability with one of the fastest recovery times (25 s) among reported materials. Therefore, the Fe3O4@DAPF CSFMNRs can serve as recyclable adsorbent materials and as an alternative to commonly used sorbent materials for the rapid removal of heavy metals from aqueous solutions.

A sensitive turn-on fluorescent probe for intracellular imaging of glutathione using single-layer MnO2 nanosheet-quenched fluorescent carbon quantum dots

A sensitive turn-on fluorescent sensor based on single-layer MnO2 nanosheet-quenched fluorescent carbon quantum dots has been developed for rapid and selective sensing of glutathione in aqueous solutions, as well as in living cells.

Au nanoparticle decorated resin microspheres: synthesis and application in electrochemical cytosensors for sensitive and selective detection of lung cancer A549 cells

A novel cytosensor that can sensitively differentiate cancer cells from normal ones is prepared by using antibody-decorated resin microspheres.

Selective detection of ferric ions by blue-green photoluminescent nitrogen-doped phenol formaldehyde resin polymer

The smaller, the more fluorescent: The hydrothermal reaction of phenol with hexamethylenetetramine (HMT) leads to two morphologies of phenol formaldehyde resin (PFR), namely, bigger nanoparticles with feeble green fluorescence and smaller amorphous polymers with strong blue-green fluorescence. It reveals that both of them are doped with nitrogen, and the blue-green photoluminescent polymer is confirmed to sense ferric ion (Fe(3+) ) with high selectivity.

Live-cell imaging of biothiols via thiol/disulfide exchange to trigger the photoinduced electron transfer of gold-nanodot sensor

Biothiols have been reported to involve in intracellular redox-homeostasis against oxidative stress. In this study, a highly selective and sensitive fluorescent probe for sensing biothiols is explored by using an ultrasmall gold nanodot (AuND), the dendrimer-entrapped Au8-cluster. This strategy relies upon a thiol/disulfide exchange to trigger the fluorescence change through a photoinduced electron transfer (PET) process between the Au8-cluster (as an electron donor) and 2-pyridinethiol (2-PyT) (as an electron acceptor) for sensing biothiols. When 2-PyT is released via the cleavage of disulfide bonds by biothiols, the PET process from the Au8-cluster to 2-PyT is initiated, resulting in fluorescence quenching. The fluorescence intensity was found to decrease linearly with glutathione (GSH) concentration (0-1500μM) at physiological relevant levels and the limit of detection for GSH was 15.4μM. Compared to most nanoparticle-based fluorescent probes that are limited to detect low molecular weight thiols (LMWTs; i.e., GSH and cysteine), the ultrasmall Au8-cluster-based probe exhibited less steric hindrance and can be directly applied in selectively and sensitively detecting both LMWTs and high molecular weight thiols (HMWTs; i.e., protein thiols). Based on such sensing platform, the surface-functionalized Au8-cluster has significant promise for use as an efficient nanoprobe for intracellular fluorescence imaging of biothiols including protein thiols in living cells whereas other nanoparticle-based fluorescent probes cannot.