Detection of Nickel in Fish Organs with a Two-Photon Fluorescent Probe

Small-Molecule Fluorescent Probes for Binding- and Activity-Based Sensing of Redox-Active Biological Metals

Although transition metals constitute less than 0.1% of the total mass within a human body, they have a substantial impact on fundamental biological processes across all kingdoms of life. Indeed, these nutrients play crucial roles in the physiological functions of enzymes, with the redox properties of many of these metals being essential to their activity. At the same time, imbalances in transition metal pools can be detrimental to health. Modern analytical techniques are helping to illuminate the workings of metal homeostasis at a molecular and atomic level, their spatial localization in real time, and the implications of metal dysregulation in disease pathogenesis. Fluorescence microscopy has proven to be one of the most promising non-invasive methods for studying metal pools in biological samples. The accuracy and sensitivity of bioimaging experiments are predominantly determined by the fluorescent metal-responsive sensor, highlighting the importance of rational probe design for such measurements. This review covers activity- and binding-based fluorescent metal sensors that have been applied to cellular studies. We focus on the essential redox-active metals: iron, copper, manganese, cobalt, chromium, and nickel. We aim to encourage further targeted efforts in developing innovative approaches to understanding the biological chemistry of redox-active metals.

A novel ratiometric fluorescent probe for the detection of nickel ions in the environment and living organisms

Nickel resources are abundant in the world, and the application of nickel in production and life is more and more extensive. However, excessive nickel entering the environment will not only cause environmental pollution but also seriously endanger plants, animals and human health. Nickel compounds are carcinogenic and have been classified as a class 1 carcinogen. Nickel mainly exists in the form of divalent ions in the environment. However, there are few simple and effective methods for the detection of nickel ions, and these methods still have certain limitations. At present, the mechanisms of nickel influence in organisms are also unclear. Therefore, we constructed a ratiometric fluorescent probe Ra-Ni, which can achieve its own self-calibration and avoid the interference of other factors, thereby realizing the specific identification of nickel ions. The probe can detect nickel ions sensitively with a detection limit as low as 26.2 nM and can respond in a short time (< 2 min), which proves the great potential of the probe in the detection of nickel ions. At the same time, Ra-Ni has also been successfully used for imaging nickel ions in living cells and zebrafish, providing an effective tool for the study of physiological and pathological processes. The detection effect of nickel ions in actual water sample is also satisfactory, which further demonstrates the practicability of Ra-Ni in environmental applications.

Advanced high resolution three-dimensional imaging to visualize the cerebral neurovascular network in stroke

As an important method to accurately and timely diagnose stroke and study physiological characteristics and pathological mechanism in it, imaging technology has gone through more than a century of iteration. The interaction of cells densely packed in the brain is three-dimensional (3D), but the flat images brought by traditional visualization methods show only a few cells and ignore connections outside the slices. The increased resolution allows for a more microscopic and underlying view. Today's intuitive 3D imagings of micron or even nanometer scale are showing its essentiality in stroke. In recent years, 3D imaging technology has gained rapid development. With the overhaul of imaging mediums and the innovation of imaging mode, the resolution has been significantly improved, endowing researchers with the capability of holistic observation of a large volume, real-time monitoring of tiny voxels, and quantitative measurement of spatial parameters. In this review, we will summarize the current methods of high-resolution 3D imaging applied in stroke.

Synthesis and characterization of 4-Halobenzylidene malanonitriles for optical detection of Nickel (II) ions in aqueous solution

In this work, we have developed fluorescent detection techniques for the determination of Ni²⁺ ions in aqueous medium with sensitivity using metal coordinating fluorescent molecules namely 4-Halobenzylidene malanonitrile. The halogen substituted benzylidene malanonitile were synthesised Knoevenagel condensation reaction of various halogen substituted aromatic aldehydes with malanonitrile and products were characterised by IR and NMR spectroscopy. The obtained benzylidene malanonitiles and are exhibited a fluorescent emission with a peak of 430 nm, 440 nm and 448 nm for chloro, bromo and fluoro substituted compounds, respectively. The intensity of optical emission of the studied molecules is increased proportional to the addition of Ni²⁺ ions. The effect of different halogen substitution on the fluorescence behaviour of benylidene malononitrile has also been investigated. The synthesised title compounds showed a lowest detection limit of 10^-20 M for the Nickel (II) ions in aqueous solution under UV-Vis absorption spectra. The molecule 4- Bromobenzylidene malanonitrile exhibited a lowest detection limit of 10^-19 M for the Nickel (II) ions in, aqueous solution, photoluminescence analysis.

Probing the Ni2+ -selective Response of Fluorescent Probe NiSensor-1 with the NiCast Photocaged Complex† ‡

CTEA (N,N-bis[2-(carboxylmethyl)thioethyl]amine) is a mixed donor ligand that has been incorporated into multiple fluorescent sensors such as NiSensor-1 that was reported to be selective for Ni²⁺ . Other metal ions such as Zn²⁺ do not produce an emission response in aqueous solution. To investigate the coordination chemistry and selectivity of this receptor, we prepared NiCast, a photocage containing the CTEA receptor. Cast photocages undergo a photoreaction that decreases electron density on a metal-bound aniline nitrogen atom, which shifts the binding equilibrium toward unbound metal ion. The unique selectivity of CTEA was examined by measuring the binding affinity of NiCast and the CTEA receptor for Ni²⁺ , Zn²⁺ , Cd²⁺ and Cu²⁺ under different conditions. In aqueous solution, Ni²⁺ binds more strongly to the aniline nitrogen atom than Cd²⁺ ; however, in CH₃ CN, the change in affinity virtually disappears. The crystal structure of [Cu(CTEA)], which exhibits a Jahn-Teller-distorted square pyramidal structure, was also analyzed to gain more insight into the underlying coordination chemistry. These studies suggest that the fluorescence selectivity of NiSensor-1 in aqueous solution is due to a stronger interaction between the aniline nitrogen atom and Ni²⁺ compared to other divalent metal ions except Cu²⁺ .

Optically superior fluorescent probes for selective imaging of cells, tumors, and reactive chemical species

Fluorescent chemical probes have become powerful tools to study biological events in living cells. They provide a great opportunity to quantitatively and qualitatively analyze the physiological and biochemical properties of living cells in real time. The ability of researchers to manipulate these probes for a desired specific purpose has turned many heads in the scientific community. Despite a slow start, fluorescent probe research has seen exponential growth over the last decade in the world. This change required some adventurous and creative scientists from different fields-like biology, medicine, and chemistry-to come together to facilitate the constant expansion of this field. This review article introduces some fundamental concepts related to fluorescent probe designing and development. It also summarizes various fluorescent probes with superior optical properties used in fields like cell biology, cellular imaging, medical research, and cancer diagnosis. It is hoped that this article will encourage more young and creative scientists to contribute their talents to this field.

The Synthesis of a Two-Photon Fluorescence Labelling Probe and its Immunochromatographic Strip for Rapid Diagnosis of COVID-19

A two-photon fluorescence labelling probe (LP) was synthesised, and LP-Ag was obtained by LP labelling the N-protein antigen (Ag) of COVID-19. LP-Ag was made into an immunochromatographic strip. When a blood sample was added to the sample hole of the test card, it would move forward along the nitrocellulose (NC) film. If the sample contained IgM, the IgM bound to LP-Ag and formed an M line with the coated mouse anti-human IgM antibody, giving a positive response to the presence of IgM of COVID-19. The sensitivity, specificity, and accuracy of the immunochromatographic strip based on the LP was compared with those of the nucleic acid detection method and the colloidal gold method, proving it to be much simpler than the nucleic acid detection method, which can greatly shorten the detection period, and to be much more stable than the colloidal gold method, which can overcome uncertainty. LP-Ag can be used to image lung tissue with COVID-19 by two-photon fluorescence microscopy (TFM).

Potentially toxic elements and environmentally-related pollutants recognition using colorimetric and ratiometric fluorescent probes

A safer detection or sensing of toxic pollutants is one among several environmental contamination issues, across the globe. The ever-increasing industrial practices and controlled or uncontrolled release of toxic pollutants from various industrial sectors is a key source of this environmental problem. Significant research efforts have been or being made to tackle this problematic issue to fulfill the growing needs of the modern world. Despite many useful aspects, heavy metals are posing noteworthy toxicological concerns and human-health related issues at various levels of the ecosystem. In this context, notable efforts from various regulatory authorities, the increase in the concentration of these toxic heavy metals in the environment is of serious concern, so real-time monitoring is urgently required. Herein, we reviewed fluorescent sensor based models and their potentialities to address the detection fate of hazardous pollutants including chromium, manganese, cobalt, nickel, copper, and zinc as model elements. The novel aspects of turn-on/off fluorescent sensors have also been discussed from a state of the art viewpoint. In summary, comprehensive literature regarding fluorescent sensor based models and their potentialities to detect various types of toxic pollutants is reviewed.

Engineering a FRET strategy to achieve a ratiometric two-photon fluorescence response with a large emission shift and its application to fluorescence imaging

Two-photon excitation (TPE) probe-based fluorescence imaging has become one of the most attractive diagnostic techniques to investigate biomolecules and biological events in live cells and tissues. At the current stage most of the TPE-based sensing is reflected by fluorescence intensity changes. Nevertheless the mere altering of intensity could be facilely affected by ambient conditions. On the other hand, TPE probes based on an intramolecular charge transfer (ICT) strategy could solve this problem to some extent with a morphology change-induced emission shift. However their applications are yet constrained due to the inherent limitation of ICT, e.g. the high degree of overlap of two emissions bands and shifts of the TPE maxima. To achieve the desired TPE-based sensing and to circumvent the problems stated above, we adapted a Förster resonance energy transfer (FRET) strategy to develop small molecule ratiometric TPE fluorescent probes. Our FRET-based ratiometric TPE fluorescent probe displays a remarkable emission shift (up to 125 nm) with two well-resolved emission bands. Hence the ratio of these two emission bands could enable the measurement of fluorescence changes more accurately, thus further improving imaging in live cells and deep tissues. To the best of our knowledge, the current reported probe has the largest emission shift among all the small molecule ratiometric TPE fluorescent probes while the maximum TPE wavelength remains unchanged. This work has provided a FRET approach to fabricate novel small molecule ratiometric TPE fluorescent probes that improve imaging in deep tissues.

Fluorescent, MRI, and colorimetric chemical sensors for the first-row d-block metal ions

Transition metals (d-blocks) are recognized as playing critical roles in biology, and they most often act as cofactors in diverse enzymes; however, improper regulation of transition metal stores is also connected to serious disorders. Therefore, the monitoring and imaging of transition metals are significant for biological research as well as clinical diagnosis. In this article, efforts have been made to review the chemical sensors that have been developed for the detection of the first-row d-block metals (except Cu and Zn): Cr, Mn, Fe, Co, and Ni. We focus on the development of fluorescent sensors (fall into three classes: "turn-off", "turn-on", and ratiometric), colorimetric sensors, and responsive MRI contrast agents for these transition metals (242 references). Future work will be likely to fill in the blanks: (1) sensors for Sc, Ti, and V; (2) MRI sensors for Cr, Mn, Co, Ni; (3) ratiometric fluorescent sensors for Cr(6+), Mn(2+), and Ni(2+), explore new ways of sensing Fe(3+) or Cr(3+) without the proton interference, as well as extend applications of MRI sensors to living systems.

Recent development of two-photon fluorescent probes for bioimaging

Fluorescent probes are essential tools for studying biological systems.

Mapping of heavy metal ion sorption to cell-extracellular polymeric substance-mineral aggregates by using metal-selective fluorescent probes and confocal laser scanning microscopy

Biofilms, organic matter, iron/aluminum oxides, and clay minerals bind toxic heavy metal ions and control their fate and bioavailability in the environment. The spatial relationship of metal ions to biomacromolecules such as extracellular polymeric substances (EPS) in biofilms with microbial cells and biogenic minerals is complex and occurs at the micro- and submicrometer scale. Here, we review the application of highly selective and sensitive metal fluorescent probes for confocal laser scanning microscopy (CLSM) that were originally developed for use in life sciences and propose their suitability as a powerful tool for mapping heavy metals in environmental biofilms and cell-EPS-mineral aggregates (CEMAs). The benefit of using metal fluorescent dyes in combination with CLSM imaging over other techniques such as electron microscopy is that environmental samples can be analyzed in their natural hydrated state, avoiding artifacts such as aggregation from drying that is necessary for analytical electron microscopy. In this minireview, we present data for a group of sensitive fluorescent probes highly specific for Fe(3+), Cu(2+), Zn(2+), and Hg(2+), illustrating the potential of their application in environmental science. We evaluate their application in combination with other fluorescent probes that label constituents of CEMAs such as DNA or polysaccharides and provide selection guidelines for potential combinations of fluorescent probes. Correlation analysis of spatially resolved heavy metal distributions with EPS and biogenic minerals in their natural, hydrated state will further our understanding of the behavior of metals in environmental systems since it allows for identifying bonding sites in complex, heterogeneous systems.