Discrete Cationic Zinc and Magnesium Complexes for Dual Organic/Organometallic-Catalyzed Ring-Opening Polymerization of Trimethylene Carbonate

Raman Study of Block Copolymers of Methyl Ethylene Phosphate with Caprolactone and L-lactide

We present an in-depth analysis of Raman spectra of novel block copolymers of methyl ethylene phosphate (MeOEP) with caprolactone (CL) and L-lactide (LA), recorded with the excitation wavelengths of 532 and 785 nm. The experimental peak positions, relative intensities and profiles of the poly(methyl ethylene phosphate) (PMeOEP), polycaprolactone (PCL) and poly(L-lactide) (PLA) bands in the spectra of the copolymers and in the spectra of the PMeOEP, PCL and PLA homopolymers turn out to be very similar. This clearly indicates the similarity between the conformational and phase compositions of PMeOEP, PCL and PLA parts in molecules of the copolymers and in the PMeOEP, PCL and PLA homopolymers. Experimental ratios of the peak intensities of PMeOEP bands at 737 and 2963 cm^-1 and the PCL bands at 1109, 1724 and 2918 cm^-1 can be used for the estimation of the PCL-b-PMeOEP copolymers chemical composition. Even though only one sample of the PMeOEP-b-PLA copolymers was experimentally studied in this work, we assume that the ratios of the peak intensities of PLA bands at 402, 874 and 1768 cm^-1 and the PMeOEP band at 737 cm^-1 can be used to characterize the copolymer chemical composition.

Lithium, Magnesium, and Zinc Centers N,N'-Chelated by an Amine-Amide Hybrid Ligand

The synthesis and structure of lithium, magnesium, and zinc complexes N,N'-chelated by a hybrid amine-amido ligand ([2-(Me₂NCH₂)C₆H₄NR]^-, abbreviated as L^NR, where R = H, SiMe₃, or Bn) are reported. The reaction of the least sterically demanding L^NH with various magnesium sources gives the hexameric imide [L^NMg]₆ (4) by the elimination of n-butane from L^NHMgⁿBu (2) or by the reaction of L^NHLi (1) with MeMgBr. [L^NH]₂Mg (3) is obtained through the addition of 0.5 equiv of ⁿBu₂Mg or Mg[N(SiMe₃)₂]₂ to L^NH₂ and with 1 equiv of ⁿBu₂Mg reacting to 2. Both L^NHMgN(SiMe₃)₂ (6) and isostructural L^NHZnN(SiMe₃)₂ (16) have been prepared using two different approaches: monodeprotonation of L^NH₂ by Zn/Mg[N(SiMe₃)₂]₂ in a 1:1 ratio or ligand substitution of 2 or L^NHZnEt (12) by 0.5 equiv of Sn[N(SiMe₃)₂]₂. The reactions of 2 or 3 with 1 provide the heterotrimetallic complex [L^NH]₄Li₂Mg (5). Benzyl- or trimethylsilyl-substituted anilines [L^N(SiMe₃)H (7) and L^N(Bn)H (8)] with 0.5 equiv of ⁿBu₂Mg allow the formation of homoleptic bis(amides) of the [L^N(R)]₂Mg type (10 and 11). Nevertheless, only the silylated secondary amine 7 is able to provide the heteroleptic n-butylmagnesium amide L^N(SiMe₃)MgⁿBu (9) upon reaction with an equimolar amount of ⁿBu₂Mg. Similarly, 12, [L^NH]₂Zn (13), L^N(R)ZnEt (17 and 18), and [L^N(R)]₂Zn [R = SiMe₃ (19) and Bn (20)] were prepared by the monodeprotonation of L^NH₂ or L^N(R)H using Et₂Zn in the corresponding stoichiometric ratio. L^NHZnI was prepared by the nucleophilic substitution of an ethyl chain in 12 by molecular iodine. A heterometallic complex, [L^NH]₄Li₂Zn (14), analogous to 5 was prepared from 12 or 13 with 1 or 2 equiv of 1, respectively.

Overview: Polycarbonates via Ring-Opening Polymerization, Differences between Six- and Five-Membered Cyclic Carbonates: Inspiration for Green Alternatives

This review aims to cover the topic of polycarbonate synthesis via ring-opening polymerization (ROP) of cyclic carbonates. We report a wide variety of ROP-initiating systems along with their detailed mechanisms. We focus on the challenges of preparing the polymers; the precise control of the properties of the materials, including molecular weight; the compositions of the copolymers and their structural characteristics. There is no one approach that works for all scales in cyclic carbonates ROP. A green process to produce polycarbonates is a luring challenge in terms of CO₂ utilization and the targeted domains for application. The main resolution seems to be the use of controlled incorporation of functional/reactive groups into polymer chains that can tailor the physicochemical and biological properties of the polymer matrices, producing what appears to be an unlimited field of applications. Glycerol carbonate (GC) is prepared from renewable glycerol and considered as a CO₂ fixation agent resulting in GC compound. This family of five-membered cyclic carbonates has attracted the attention of researchers as potential monomers for the synthesis of polycarbonates (PCs). This cyclic carbonate group presents a strong alternative to Bisphenol A (BPA), which is used mainly as a monomer for the production of polycarbonate and a precursor of epoxy resins. As of December 2016, BPA is listed as a substance of very high concern (SVHC) under the REACH regulation. In 2006, Mouloungui et al. reported the synthesis and oligomerization of GCs. The importance of GCs goes beyond their carbonate ring and their physical properties (high boiling point, high flash point, low volatility, high electrical conductivity) because they also contain a hydroxyl group. The latter offers the possibility of producing oligo and/or polycarbonate compounds that have hydroxyl groups that can potentially lead to different reaction mechanisms and the production of new classes of polycarbonates with a wide range of applications.

Polymerization of Polar Monomers Mediated by Main-Group Lewis Acid-Base Pairs

The development of new or more sustainable, active, efficient, controlled, and selective polymerization reactions or processes continues to be crucial for the synthesis of important polymers or materials with specific structures or functions. In this context, the newly emerged polymerization technique enabled by main-group Lewis pairs (LPs), termed as Lewis pair polymerization (LPP), exploits the synergy and cooperativity between the Lewis acid (LA) and Lewis base (LB) sites of LPs, which can be employed as frustrated Lewis pairs (FLPs), interacting LPs (ILPs), or classical Lewis adducts (CLAs), to effect cooperative monomer activation as well as chain initiation, propagation, termination, and transfer events. Through balancing the Lewis acidity, Lewis basicity, and steric effects of LPs, LPP has shown several unique advantages or intriguing opportunities compared to other polymerization techniques and demonstrated its broad polar monomer scope, high activity, control or livingness, and complete chemo- or regioselectivity, as well as its unique application in materials chemistry. These advances made in LPP are comprehensively reviewed, with the scope of monomers focusing on heteroatom-containing polar monomers, while the polymerizations mediated by main-group LAs and LBs separately that are most relevant to the LPP are also highlighted or updated. Examples of applying the principles of the LPP and LP chemistry as a new platform for advancing materials chemistry are highlighted, and currently unmet challenges in the field of the LPP, and thus the suggested corresponding future research directions, are also presented.

Metallic organophosphate catalyzed bulk ring-opening polymerization

Metallic organophosphates have catalyzed the bulk ring-opening polymerization of cyclic esters and cyclic carbonates through a bifunctional mode.

Dual catalysis system for ring-opening polymerization of lactones and 2,2-dimethyltrimethylene carbonate

The dual catalysis system exhibit the characteristics of a controlled ROP and suitable activities for the ROP of lactones and carbonates. Polymers prepared through this dual catalytic route possess predictable molecular weights, narrow polydispersities, and high end-group fidelity.

Mono-BHT heteroleptic magnesium complexes: synthesis, molecular structure and catalytic behavior in the ring-opening polymerization of cyclic esters

Numerous heteroleptic 2,6-di-tert-butyl-4-methylphenolate (BHT) magnesium complexes have been synthesized by treatment of (BHT)MgBu(THF)₂ with various alcohols. Molecular structures of the complexes have been determined by X-ray diffraction. The magnesium coordination number in [(BHT)Mg(μ-OBn)(THF)]₂ (3) and [(BHT)Mg(μ-O-tert-BuC₆H₄)(THF)]₂ (4) is equal to 4. Complexes formed from esters of glycolic and lactic acids, [(BHT)Mg(μ-OCH₂COOEt)(THF)]₂ (5) and [(BHT)Mg(μ-OCH(CH₃)COOCH₂COO^tBu)(THF)]₂ (6) contain chelate fragments with pentacoordinated magnesium. Compounds 3-6 contain THF molecules coordinated to magnesium atoms. Complex {(BHT)Mg[μ-O(CH₂)₃CON(CH₃)₂]}₂ (7) does not demonstrate any tendency to form an adduct with THF. It has been experimentally determined that complexes 3 and 5 are highly active catalysts of lactide polymerization. The activity of 4 is rather low, and complex 7 demonstrates moderate productivity. According to DOSY NMR experiments, compounds 3 and 5 retain their dimeric structures even in THF. The free energies of model dimeric [(DBP)Mg(μ-OMe)(Sub)]₂ and monomeric (DBP)Mg(OMe)(Sub)₂ products on treatment of [(DBP)Mg(μ-OMe)(THF)]₂ with a series of σ-electron donors (Sub) have been estimated by DFT calculations. These results demonstrate that the substitution of THF by Sub in a dimeric molecule is an energetically allowed process, whereas the dissociation of dimers is energetically unfavorable. DFT modeling of ε-CL and (dl)-lactide ROP catalyzed by dimeric and monomeric complexes showed that a cooperative effect of two magnesium atoms occurs within the ROP for binuclear catalytic species. A comparison of the reaction profiles for ROP catalyzed by binuclear and mononuclear species allowed us to conclude that the binuclear mechanism is favorable in early stages of ROP initiated by dimers 3 and 5.

Computational Studies on the Selective Polymerization of Lactide Catalyzed by Bifunctional Yttrium NHC Catalyst

A theoretical investigation of the ring-opening polymerization (ROP) mechanism of rac-lactide (LA) with an yttrium complex featuring a N-heterocyclic carbine (NHC) tethered moiety is reported. It was found that the carbonyl of lactide is attacked by N(SiMe3)2 group rather than NHC species at the chain initiation step. The polymerization selectivity was further investigated via two consecutive insertions of lactide monomer molecules. The insertion of the second monomer in different assembly modes indicated that the steric interactions between the last enchained monomer unit and the incoming monomer together with the repulsion between the incoming monomer and the ligand framework are the primary factors determining the stereoselectivity. The interaction energy between the monomer and the metal center could also play an important role in the stereocontrol.

Synthesis of Polycarbonates and Poly(ether carbonate)s Directly from Carbon Dioxide and Diols Promoted by a Cs2CO3/CH2Cl2 System

Recently, polycarbonates have attracted considerable research interest because of their potential biodegradability and sustainability. Here, we present a direct route for the synthesis of polycarbonates and poly(ether carbonate)s from carbon dioxide (CO₂) and diols, promoted by Cs₂CO₃ and CH₂Cl₂ under 1 atm of CO₂. Quantitative conversion of diols and polymers with up to 11 kg/mol molecular weight could be obtained. While benzylic diols lead to predominantly carbonate linkage, aliphatic diols result in the incorporation of the methylene unit of CH₂Cl₂ that produces poly(ether carbonate)s. Both primary and secondary diols have been successfully incorporated into the polymer chain.

Triethylamine-based catalysts for the melt polymerization of carbonate monomers

Triethylamine hydrochloride and triethylamine catalyze the melt polymerization of carbonate monomers faster than stannous octoate.

Diastereoselective synthesis of chiral aminophenolate magnesium complexes and their application in the stereoselective polymerization of rac-lactide and rac-β-butyrolactone

A series of magnesium silylamido complexes supported by chiral aminophenolate ligands were synthesized, and their catalytic behaviors toward the ring-opening polymerization of rac-lactide (LA) and rac-β-butyrolactone (BBL) were explored.

Ring-opening polymerization of rac-lactide and α-methyltrimethylene carbonate catalyzed by magnesium and zinc complexes derived from binaphthyl-based iminophenolate ligands

Magnesium and zinc complexes derived from binaphthyl-based iminophenolate ligands efficiently initiated the ring-opening polymerization of rac-lactide and α-MeTMC, with the highest heteroselectivity (P_r = 0.84) or regioselectivity (X_reg = 0.98) obtained for the zinc complex.

Magnesium complexes containing biphenyl-based tridentate imino-phenolate ligands for ring-opening polymerization of rac-lactide and α-methyltrimethylene carbonate

A series of racemic 2-[(2'-(dimethylamino)biphenyl-2-ylimino)methyl]-4-R(2)-6-R(1)-phenols (L¹H-L⁴H) were reacted with {Mg[N(SiMe3)2]2}2 to provide four heteroleptic magnesium complexes (L¹⁻⁴)MgN(SiMe3)2·(THF)n (1, R(1) = (t)Bu, R(2) = Me, n = 1; 2, R(1) = R(2) = CMe2Ph, n = 0; 3, R(1) = CPh3, R(2) = (t)Bu, n = 1; 4, R(1) = Br, R(2) = (t)Bu, n = 0), which have been fully characterized. X-ray structural determination shows that complex 1 possesses a monomeric structure, but complex 4 is dimeric with C2-symmetry where the two metal centers are bridged by two phenolate oxygen atoms of the ligands. The coordination geometry around the magnesium center in these complexes can be best described as a distorted tetrahedral geometry. The heteroleptic complexes 1-4 efficiently initiate the ring-opening polymerization of rac-lactide and α-methyltrimethylene carbonate (α-MeTMC) and the polymerizations are better controlled in the presence of 2-propanol. In general, the introduction of a bulky ortho-substituent on the phenoxy unit results in increases of both the catalytic activity and the stereo- or regioselectivity of the corresponding magnesium complex. Microstructure analyses of the resulting PLAs revealed that P(r) values range from 0.46 to 0.81, depending on the catalyst and the polymerization conditions. For racemic α-MeTMC, detailed analyses using (1)H and (13)C NMR spectroscopy indicated the preferential ring-opening of α-MeTMC at the most hindered oxygen-acyl bond (X(reg) = 0.65-0.86).

Monomeric Ti(IV) homopiperazine complexes and their exploitation for the ring opening polymerisation of rac-lactide

BACKGROUND

The area of biodegradable/sustainable polymers is one of increasing importance in the 21st Century due to their positive environmental characteristics. Lewis acidic metal centres are currently one of the most popular choices for the initiator for the polymerisation. Thus, in this paper we report the synthesis and characterisation of a series of monometallic homopiperazine Ti(IV) complexes where we have systematically varied the sterics of the phenol moieties.

RESULTS

When the ortho substituent of the ligand is either a Me, tBu or amyl then the β-cis isomer is isolated exclusively in the solid-state. Nevertheless, in solution multiple isomers are clearly observed from analysis of the NMR spectra. However, when the ortho substituent is an H-atom then the trans-isomer is formed in the solid-state and solely in solution. The complexes have been screened for the polymerisation of rac-lactide in solution and under the industrially preferred melt conditions. Narrow molecular weight material (PDI 1.07 - 1.23) is formed under melt conditions with controlled molecular weights.

CONCLUSIONS

Six new Ti(IV) complexes are presented which are highly active for the polymerisation. In all cases atactic polymer is prepared with predictable molecular weight control. This shows the potential applicability of Ti(IV) to initiate the polymerisations.

Aluminium salalen complexes based on 1,2-diaminocyclohexane and their exploitation for the polymerisation of rac-lactide

In this paper nine various salalen ligands have been prepared and characterised. The steric and electronic effects of both the salen and salan fragments have been varied in a systematic fashion to ascertain how this affects the selectivity for the ROP of rac-lactide. These were complexed to AlMe3 to generate pseudo trigonal bypyramidal metal centred complexes. Upon addition of benzyl alcohol the active initiator can be easily prepared. The complexes were screened for the ROP of rac-lactide in solution and melt conditions. PLA with narrow molecular weight distributions (PDIs range from 1.07-1.67) could be isolated with moderate degrees of tacticity. Significantly it was found that chloro groups on the imine fragment increased the degree of heterotactic enchainment in the polymer. The kinetics for one series of salalen-Al complexes was also investigated.

Alkali aminoether-phenolate complexes: synthesis, structural characterization and evidence for an activated monomer ROP mechanism

Several monometallic {LO(i)}M complexes of lithium (M = Li; i = 1 (1), 2 (2), 3 (3)) or potassium (M = K, i = 3 (4)) and the heteroleptic bimetallic lithium complex {LO(3)}Li·LiN(SiMe2H)2 (5), all supported by monoanionic aminoether-phenolate {LO(i)}(-) (i = 1-3) ligands, have been synthesized and structurally characterized. A large range of coordination motifs is represented in the solid state, depending on the chelating ability of the ligand, the size of the metal and the number of metallic centres found in the complex. Pulse-gradient spin-echo NMR showed that 1-4 are monomeric in solution, irrespective of their (mono- or di)nuclearity in the solid-state. VT (7)Li and DOSY NMR measurements conducted for 5 indicated that the two Li atoms in the complex do not exchange positions even at 80 °C. Upon addition of 1-10 equiv. of BnOH, the electron-rich and sterically congested {LO(3)}Li complex (3) promotes the controlled living and immortal ring-opening polymerisation of L-lactide. The combination of polymer end-group analyses and stoichiometric model reactions unambiguously provided evidence that ROP reactions catalyzed by these two-component {LO(i)}Li/BnOH catalyst systems operate according to an activated monomer mechanism, and not via the coordination-insertion scenario frequently assumed for similar alkali phenolate-alcohol systems.