Aromatic CC Bonds as Dipolarophiles: Facile Reactions of Uncomplexed Electron-Deficient Benzene Derivatives and Other Aromatic Rings with a Non-Stabilized Azomethine Ylide

Tandem Reactions of Electrophilic Indoles toward Indolizines and Their Subsequent Transformations through Pd(II)-Mediated C-H Functionalization to Access Polyring-Fused N-Heterocycles

A simple and efficient synthetic approach for generating a library of structurally novel indolizines has been developed via sequential 1,3-dipolar cycloaddition-ring opening processes. Using this methodology, a series of indolizines bearing different substituents were made in moderate to good yields. The presence of two functionalizable C-H bonds in these indolizine motifs makes them attractive for accessing fused indolizine scaffolds. In this line, we have introduced palladium-mediated site-selective C-H functionalizations, where the N-center and the two C-H centers of the indolizine moiety can be readily functionalized to generate fused N-heterocycles. Utilizing a Pd-mediated dual C-H activation of 5-benzoyl-substituted indolizine afforded 6H-indeno-indolizine, and a tetracene, viz., indolizino[2,1-b]indoles, was produced in the same substrate by the Pd-catalyzed selective C-H amination in the presence of oxygen.

Recent Strategies in the Nucleophilic Dearomatization of Pyridines, Quinolines, and Isoquinolines

Dearomatization reactions have become fundamental chemical transformations in organic synthesis since they allow for the generation of three-dimensional complexity from two-dimensional precursors, bridging arene feedstocks with alicyclic structures. When those processes are applied to pyridines, quinolines, and isoquinolines, partially or fully saturated nitrogen heterocycles are formed, which are among the most significant structural components of pharmaceuticals and natural products. The inherent challenge of those transformations lies in the low reactivity of heteroaromatic substrates, which makes the dearomatization process thermodynamically unfavorable. Usually, connecting the dearomatization event to the irreversible formation of a strong C-C, C-H, or C-heteroatom bond compensates the energy required to disrupt the aromaticity. This aromaticity breakup normally results in a 1,2- or 1,4-functionalization of the heterocycle. Moreover, the combination of these dearomatization processes with subsequent transformations in tandem or stepwise protocols allows for multiple heterocycle functionalizations, giving access to complex molecular skeletons. The aim of this review, which covers the period from 2016 to 2022, is to update the state of the art of nucleophilic dearomatizations of pyridines, quinolines, and isoquinolines, showing the extraordinary ability of the dearomative methodology in organic synthesis and indicating their limitations and future trends.

Annulation reactions of electrophilic benzannulated heterocycles towards heteroacenes

The current review describes different annulation strategies reported with electrophilic benzannulated heterocycles for accessing heteroacenes. For the past two decades, the chemistry of electrophilic benzannulated heterocycles was extensively investigated, and several dipolar cycloadditions, metal and organo-catalyzed transformations were introduced for the generation of fused heterocycles. In this review, we have collected all the reports where the annulation of electrophilic benzannulated heterocycles results in a fully aromatic system, viz. heteroacenes with tri-, tetra-, and pentacyclic rings. We reviewed every paper on the synthesis of fused heterocycles that was accessible and categorized the review into several parts based on the electrophilic benzannulated heterocycle used in the heteroacene synthesis such as electrophilic indole, electrophilic benzothiophene, and so forth. The generality and mechanistic postulates of each methodology are highlighted. In addition, we have also tried to feature the advantages or shortcomings of each method and have mentioned the possible applications of these methodologies for accessing heteroacenes for material applications.

Dichotomic Dearomatizations of Benzene vs Pyridine Rings of Sulfonyloxypyridine via (3 + 2) Cycloaddition

Electron-poor arenesulfonyloxypyridines are selectively dearomatized whether on the pyridine or on the phenyl group through 1,3-dipolar cycloaddition (1,3-DC) involving non-stabilized azomethine ylides (AMY). Electronic effects of substituents on the aromatic rings allow to induce the regioselectivity of the transformation. Novel pyrrolidinic polycyclic heterocycles are thereby produced under mild acidic conditions at room temperature.

Photocatalyzed (3+2) Cycloaddition for the Dearomatization of Electron-Poor Arenes under Flow Conditions

The photocatalyzed dearomative reaction between various electron-deficient aromatic compounds and a non-stabilized azomethine ylide is successfully performed in a flow system. Whereas the use of supported eosin as organic photocatalyst exhibits limited efficiency, turning to the soluble Rose Bengal allows to transform a broad range of substrates from hetarenes (indole, benzofuran, quinoline, pyridine) to naphthalenes and benzenes. This photocatalyzed (3+2) dearomative cycloaddition under green light irradiation provides a simple and efficient access to tridimensional pyrrolidino scaffolds with a tetrasubstituted carbon center at ring junction and can be performed in the friendly ethyl acetate. Computational studies support the mechanism involving azomethine ylide as reactive species toward the electron-poor arene.

Copper-Catalyzed Annulation of Electrophilic Benzannulated Heterocycles with 2-Aminopyridine and 2-Aminoquinoline: Direct Access toward Polyring-Fused Imidazo[1,2-a]pyridines

We have developed a direct method for the synthesis of polyring-fused imidazo[1,2-a]pyridines via a copper-catalyzed annulation of electrophilic benzannulated heterocycles with 2-aminopyridine and 2-aminoquinoline. From 3-nitroindoles and 2-aminopyridine, we could synthesize tetracenes, viz., indole-fused imidazo[1,2-a]pyridines, and by starting from 2-aminoquinoline, we could generate pentacenes, viz., indolo-imidazo[1,2-a]quinolines. In addition, we could also extend the methodology toward the synthesis of benzothieno-imidazo[1,2-a]pyridines starting from 3-nitrobenzothiophene. Furthermore, the basic photophysical properties of these synthesized heteroacenes were evaluated.

Azomethine Ylides-Versatile Synthons for Pyrrolidinyl-Heterocyclic Compounds

Azomethine ylides are nitrogen-based three-atom components commonly used in [3+2]-cycloaddition reactions with various unsaturated 2π-electron components. These reactions are highly regio- and stereoselective and have attracted the attention of organic chemists with respect to the construction of diverse heterocycles potentially bearing four new contiguous stereogenic centers. This review article complies the most important [3+2]-cycloaddition reactions of azomethine ylides with various olefinic, unsaturated 2π-electron components (acyclic, alicyclic, heterocyclic, and exocyclic ones) reported over the past two decades.

[3 + 2] cycloaddition of nonstabilized azomethine ylides and 2-benzothiazolamines to access imidazolidine derivatives

A simple and practical method for the construction of 1,3,5-trisubstituted imidazolidine derivatives via [3 + 2] cycloaddition reaction has been developed. This reaction could smoothly proceed between nonstabilized azomethine ylides generated in situ and 2-benzothiazolamines to deliver a wide scope of differently substituted imidazolidines in high yields (up to 98%). The structure of one example was confirmed by X-ray single-crystal structure analysis.

Base-Mediated Annulation of Electrophilic Benzothiophene with Naphthols and Phenols: Accessing Benzothiophene-Fused Heteroacenes

A base-mediated annulation of 2-nitrobenzothiophenes with naphthols was realized for the synthesis of hitherto unknown class of heteroacenes, namely benzothieno[2,3-b]naphthofurans. By using naphthols with a hydroxyl group positioned at 1st or 2nd position, we could synthesize two positional isomers, benzothieno[2,3-b]naphtho[2,1-d]furans or benzothieno[2,3-b]naphtho[2,3-d]furans. The annulation was found to be general with a range of substituted 2-nitrobenzothiophenes and naphthols. This heteroannulation of benzothiophene was extended using a range of phenols affording the corresponding benzothieno[2,3-b]benzofurans in moderate yields. The basic photophysical properties of these heteroacenes were evaluated, and we also demonstrated the applicability of this annulation on the gram scale.

Catalyst-free formal [3 + 2] cycloaddition of stabilized N,N-cyclic azomethine imines to 3-nitrobenzofurans and 3-nitro-4H-chromenes: access to heteroannulated pyrazolo[1,2-a]pyrazoles

We have studied the [3 + 2]-cycloaddition of various N,N-cyclic azomethine imines to 3-nitrobenzofurans. This process is a rare example of their dearomatization. We have also extended this process to the related 3-nitro-4H-chromenes as dipolarophiles. Both reactions provide access to benzofuro- and chromeno-condensed pyrazolo[1,2-a]pyrazoles with 100% atom economy in a diastereoselective manner under mild eco-friendly conditions. Finally, on the basis of DFT calculations, the mechanistic insights into the mentioned [3 + 2]-cycloadditions and explanations of the experimentally determined limitations of the method are given. Hirshfeld atomic charge values of push-pull heterocycles were suggested as a criterion for a priori assessment of the possibility of their dipolar cycloaddition with N,N-cyclic azomethine imines.

Palladium-Catalyzed Dearomative Methoxyallylation of 3-Nitroindoles with Allyl Carbonates

Herein we report a Pd-catalyzed dearomative methoxyallylation of 3-nitroindoles with readily available allyl carbonates. Good yields (up to 86 %) and diastereoselectivity (up to >20:1 dr) are obtained for a wide range of substrates. The compatibility of gram-scale synthesis and the relatively low catalyst loading (down to 1 mol % of [Pd]) enhance the practicality of this method. The kinetic experiments indicate that the rate-determining step of this reaction is the nucleophilic attack of the alkoxide anion.

Bicyclic Pyrrolidines for Medicinal Chemistry via [3 + 2]-Cycloaddition

A general approach to bicyclic fused pyrrolidines via [3 + 2]-cycloaddition between nonstabilized azomethyne ylide and endocyclic electron-deficient alkenes was elaborated. "Push-pull" alkenes and CF₃-alkenes did not react with the azomethyne ylide under the previously reported conditions, and we developed a superior protocol (LiF, 140 °C, no solvent). Among obtained products were medchem-relevant bicyclic sulfones, monofluoro-, difluoro-, and trifluoromethyl-substituted pyrrolidines. This approach not only allowed preparation of novel molecules but also significantly simplified synthesis of the existing ones (e.g., sofinicline).

Nitropyridines as 2π-Partners in 1,3-Dipolar Cycloadditions with N-Methyl Azomethine Ylide: An Easy Access to Condensed Pyrrolines

1,3-Dipolar cycloaddition reactions of 2-substituted 5-R-3-nitropyridines and isomeric 3-R-5-nitropyridines with N-methyl azomethine ylide were studied. The effect of the substituent at positions 2 and 5 of the pyridine ring on the possibility of the [3+2]-cycloaddition process was revealed. A number of new derivatives of pyrroline and pyrrolidine condensed with a pyridine ring were synthesized.

Palladium-Catalyzed Formal (3 + 2) Cycloaddition Reactions of 2-Nitro-1,3-enynes with Vinylaziridines, -epoxides, and -cyclopropanes

A two-step Pd-catalyzed (3 + 2) cycloaddition/HNO₂ elimination reaction sequence has been developed to give novel cyclic 1,3-dien-5-yne systems from Pd-stabilized zwitterionic 1,3-dipoles and 2-nitro-1,3-enyne substrates. The process is highly atom-efficient and tolerates the reaction of 2-vinyloxirane, 1-tosyl-2-vinylaziridine, and diethyl 2-vinylcyclopropane-1,1-dicarboxylate derived 1,3-dipoles with a variety of 2-nitro-1,3-enyne substrates. The stereochemistry of the intermediate (3 + 2) cycloadducts was determined by single crystal X-ray analysis. Furthermore, a selective kinetic elimination of the cycloadduct with an antiperiplanar relationship between the NO₂ group and the participating hydrogen was demonstrated, allowing for efficient isolation of a single diastereoisomer of the cycloadduct.

Reactivity of 3-nitroindoles with electron-rich species

The indol(in)e building block is one of the "privileged-structures" for the pharmaceutical industry since this fragment plays a central role in drug discovery. While the electron-rich character of the indole motif has been investigated for decades, exploiting the electrophilic reactivity of 3-nitroindole derivatives has recently been put at the heart of a wide range of new, albeit challenging, chemical reactions. In particular, dearomatization processes have considerably enriched the scope of C2[double bond, length as m-dash]C3 functionalizations of these scaffolds. This feature article showcases this remarkable electrophilic reactivity of 3-nitroindoles with electron-rich species and highlights their value in generating diversely substituted indol(in)es. This compilation underlines how these heteroaromatic templates have gradually become model substrates for electron-poor aromatic compounds in dearomatization strategies.

Merging Imidazolidines with a Trifluoromethylated Tetrasubstituted Carbon through Tungsten Catalyzed 1,3-Dipolar Cycloaddition

An unprecedented 1,3-dipole cycloaddition between acyclic CF₃-ketimines and N-benzyl azomethine ylide has been allowed by tungsten catalysis, furnishing a range of novel imidazolidines bearing a trifluoromethylated tetrasubstituted carbon center. This reaction appears as one of rare examples that challenging acyclic CF₃-ketimines have been engaged in 1,3-cycloaddition reactions. The capability for gram-scale synthesis and variant derivatizations of cycloaddition adducts illustrates the synthetic potential of this approach. This protocol provides a facile access to a rapidly enlarging pool of motifs with a trifluoromethylated fully substituted carbon.

Dearomatization of 3-cyanoindoles by (3 + 2) cycloaddition: from batch to flow chemistry

1,3-Dipolar dearomatizing cycloadditions between a non-stabilized azomethine ylide and 3-cyanoindoles or benzofuran afford the corresponding 3D-heterocycles bearing a quaternary carbon centre at the ring junction. While 6 equivalents of ylide precursor 1 are required for full conversion in a classical flask, working under flow conditions limits the excess (3 equiv., tR = 1 min) and leads to a cleaner process, affording cycloadducts that are easier to isolate.

Unprecedented access to functionalized pyrrolo[2,1-a]isoquinolines from the domino reaction of isoquinolinium ylides and electrophilic benzannulated heterocycles

We have come across an unexpected reaction between electrophilic indoles and isoquinolinium methylides for accessing functionalized pyrrolo[2,1-a]isoquinolines. The reaction was found in general to yield the products in good yields. We also observed the formation of S-S-bridged bis-pyrrolo[2,1-a]isoquinolines from the reaction of 3-nitro benzothiophene and isoquinolinium methylides.

Synthesis of Benzothienobenzofurans via Annulation of Electrophilic Benzothiophenes with Phenols

We have developed a metal-free, mild, and green synthetic route toward benzothieno[3,2-b]benzofurans by the annulation of 3-nitrobenzothiophene with phenols. The reaction was found to be general with a range of substituted phenols. In addition, we could extend the methodology for the synthesis of pentacenes and could demonstrate the synthesis in gram-scale. Moreover, we extended the strategy for the synthesis of benzothieno[2,3-b]benzofurans by starting from 2-nitrobenzothiophenes.

Nitro compounds as the core structures of promising energetic materials and versatile reagents for organic synthesis

This review addresses some promising areas of chemistry of nitro compounds extensively developed in recent years in Russia (particularly at the N.D.Zelinsky Institute of Organic Chemistry, Russian Academy of Sciences) and worldwide. The most important results in the synthesis of novel energetic N-, C- and O-nitro compounds are summarized. New environmentally friendly approaches to the preparation of known compounds of this series, used as components of energetic compositions, are considered. Methods for selective transformations of various nitro compounds to valuable products of organic synthesis, primarily biologically active products and their precursors, are systematically analyzed.

The bibliography includes 446 references.

Dearomative [3 + 2] cycloaddition reaction of nitrobenzothiophenes with nonstabilized azomethine ylides

A highly diastereoselective dearomative [3 + 2] 1,3-dipolar cycloaddition reaction of nitrobenzothiophenes with an in situ-generated nonstabilized azomethine ylides has been developed. The transformation provides a series of functionalized fused tricyclic benzo[4,5]thieno[2,3-c]pyrroles in good yields (up to 92%) under mild reaction conditions. In addition, a gram-scale experiment and the synthetic transformation of the cycloadduct further highlighted the synthetic utility. The relative configurations of the typical products were clearly confirmed by X-ray crystallography.

A simple and efficient method for the synthesis of benzo[4,5]thieno[2,3-c]pyrroles via dearomative [3 + 2] 1,3-dipolar cycloaddition reaction of nitrobenzothiophenes with an in situ-generated nonstabilized azomethine ylides have been developed.

Benzoazepine-Fused Isoindolines via Intramolecular (3 + 2)-Cycloadditions of Azomethine Ylides with Dinitroarenes

Aminobenzaldehydes bearing a pendant 3,5-dinitrophenyl group react thermally with N-substituted α-amino acids to form unprecedented benzoazepine-fused isoindolines. The reaction proceeds via a dearomatization/rearomatization sequence involving an intramolecular (3 + 2)-cycloaddition between the in situ formed azomethine ylide and the dinitroarene. Various glycine derivatives are tolerated as well as branched substrates based on cyclic, α-mono-, and α,α-disubstituted amino acids, giving single diastereomers in many cases. The method is scalable and gives products with a nitro group ready for further manipulation.

Cross 1,3-dipolar cycloadditions of C,N-cyclic azomethine imines with an N-benzyl azomethine ylide: facile access to fused tricyclic 1,2,4-hexahydrotriazines

A cross 1,3-dipolar cycloaddition of two different ylides between C,N-cyclic azomethine imines with an in situ-generated nonstabilized azomethine ylide from an N-benzyl precursor was realized. The reactions afforded a clean and facile access to diverse fused tricyclic 1,2,4-hexahydrotriazines in high yields (up to 96%). The chemical structures of the typical compounds were confirmed by X-ray single-crystal structure analysis.

Phosphine-catalyzed regiospecific (3 + 2) cyclization of 3-nitroindoles with allene esters

The title reaction has been established to construct indole-fused five-membered rings in good yields (up to 86%).