A Thorough Investigation of the Active Titanium Species in TS-1 Zeolite by In Situ UV Resonance Raman Spectroscopy

Methanol-to-Olefins Studied by UV Raman Spectroscopy as Compared to Visible Wavelength: Capitalization on Resonance Enhancement

Resonance Raman spectroscopy can provide insights into complex reaction mechanisms by selectively enhancing the signals of specific molecular species. In this work, we demonstrate that, by changing the excitation wavelength, Raman bands of different intermediates in the methanol-to-hydrocarbons reactions can be identified. We show in particular how UV excitation enhances signals from short-chain olefins and cyclopentadienyl cations during the induction period, while visible excitation better detects later-stage aromatics. However, visible excitation is prone to fluorescence that can obscure Raman signals, and hence, we show how fast fluorescence rejection techniques like Kerr gating are necessary for extracting useful information from visible excitation measurements.

Engineering surface framework TiO6 single sites for unprecedented deep oxidative desulfurization

Catalytic oxidative desulfurization (ODS) using titanium silicate catalysts has emerged as an efficient technique for the complete removal of organosulfur compounds from automotive fuels. However, the precise control of highly accessible and stable-framework Ti active sites remains highly challenging. Here we reveal for the first time by using density functional theory calculations that framework hexa-coordinated Ti (TiO6) species of mesoporous titanium silicates are the most active sites for ODS and lead to a lower-energy pathway of ODS. A novel method to achieve highly accessible and homogeneously distributed framework TiO6 active single sites at the mesoporous surface has been developed. Such surface framework TiO6 species exhibit an exceptional ODS performance. A removal of 920 ppm of benzothiophene is achieved at 60°C in 60 min, which is 1.67 times that of the best catalyst reported so far. For bulky molecules such as 4,6-dimethyldibenzothiophene (DMDBT), it takes only 3 min to remove 500 ppm of DMDBT at 60°C with our catalyst, which is five times faster than that with the current best catalyst. Such a catalyst can be easily upscaled and could be used for concrete industrial application in the ODS of bulky organosulfur compounds with minimized energy consumption and high reaction efficiency.

Review and perspectives on TS-1 catalyzed propylene epoxidation

Titanium silicate zeolite (TS-1) is widely used in the research on selective oxidations of organic substrates by H2O2. Compared with the chlorohydrin process and the hydroperoxidation process, the TS-1 catalyzed hydroperoxide epoxidation of propylene oxide (HPPO) has advantages in terms of by-products and environmental friendliness. This article reviews the latest progress in propylene epoxidation catalyzed by TS-1, including the HPPO process and gas phase epoxidation. The preparation and modification of TS-1 for green and sustainable production are summarized, including the use of low-cost feedstocks, the development of synthetic routes, strategies to enhance mass transfer in TS-1 crystal and the enhancement of catalytic performance after modification. In particular, this article summarizes the catalytic mechanisms and advanced characterization techniques for propylene epoxidation in recent years. Finally, the present situation, development prospect and challenge of propylene epoxidation catalyzed by TS-1 were prospected.

Insights into the mechanism of the solvolysis of propylene oxide over titanium silicalite-1: a theoretical study

In order to probe into the mechanism of solvolysis (alcoholysis/hydrolysis) of propylene oxide (PO), the formation of propylene glycol (PG), 1-methoxy-2-propanol (PPM) and 2-methoxy-1-propanol (SPM) over the TS-1 catalyst with tetrahedral Ti and Ti/defect sites was systematically discussed using an embedded quantum mechanical/molecular mechanics (QM/MM) approach. The results showed that the activity of PO solvolysis is closely related to the ring-opening ability of active substances, and the ring-opening ability is in the following order: Si-O(H)-Ti > Ti-OH > 5MR Ti-OOH > Ti-OCH3 (tetrahedral Ti site); 3MR Ti-OOH > Ti-OH > 5MR Ti-OOH > Ti-OCH3 (Ti/defect site). At the tetrahedral site, the concerted mechanism is the dominant pathway for PO ring opening to form PPM, while a competitive relationship exists between stepwise and concerted mechanisms to form PG and SPM. Si-O(H)-Ti exhibits excellent PO ring-opening activity because of its strong Brønsted acidity, but it is difficult to form. At the Ti/defect site, the stepwise mechanism via PO ring opening with 3MR Ti-OOH and then successive hydrolysis/alcoholysis to form product is the dominant pathway. The overall energy barrier of the optimal route is relatively lower as compared to the tetrahedral Ti site. This work opens up a new path for providing more information on the detailed mechanism in the solvolysis of PO over the TS-1 catalyst from a theoretical point of view.

NMR Signatures and Electronic Structure of Ti Sites in Titanosilicalite-1 from Solid-State 47/49Ti NMR Spectroscopy

Although titanosilicalite-1 (TS-1) is among the most successful oxidation catalysts used in industry, its active site structure is still debated. Recent efforts have mostly focused on understanding the role of defect sites and extraframework Ti. Here, we report the ^47/49Ti signature of TS-1 and molecular analogues [Ti(OTBOS)₄] and [Ti(OTBOS)₃(OⁱPr)] using novel MAS CryoProbe to enhance the sensitivity. While the dehydrated TS-1 displays chemical shifts similar to those of molecular homologues, confirming the tetrahedral environment of Ti consistent with X-ray absorption spectroscopy, it is associated with a distribution of larger quadrupolar coupling constants, indicating an asymmetric environment. Detailed computational studies on cluster models highlights the high sensitivity of the NMR signatures (chemical shift and quadrupolar coupling constant) to small local structural changes. These calculations show that, while it will be difficult to distinguish mono- vs dinuclear sites, the sensitivity of the ^47/49Ti NMR signature should enable distinguishing the Ti location among specific T site positions.

Preparation of Micron-Sized TS-1 Spherical Membrane Catalysts and Their Performance in the Epoxidation of Chloropropene

Titanium silica (TS-1) membrane catalysts grown on the surfaces of spherical substrates can both exploit the high catalytic performance and facilitate their separation from products after the reaction. In this work, a simple static crystallization method was used to perform the in situ construction of a TS-1 membrane on the surfaces of micron-sized spherical carriers. The shortcomings of the TS-1 membrane under static crystallization conditions were overcome by in situ dynamic crystallization, and the effect of rotation speed on the formation of the molecular sieve membrane was investigated. The results showed that the molecular sieve membrane was smooth and homogeneous, with a higher synthesis efficiency at a slow rotational speed. The micron TS-1 spherical membrane catalytic chloropropene epoxidation reaction was investigated in a fixed bed, and the conversion of hydrogen peroxide and selectivity of epichlorohydrin reached 99.4 and 96.8%, respectively. After being reused twice, the catalyst still maintained a stable catalytic performance.

Recent Advances in Tetra- (Ti, Sn, Zr, Hf) and Pentavalent (Nb, V, Ta) Metal-Substituted Molecular Sieve Catalysis

Metal substitution of molecular sieve systems is a major driving force in developing novel catalytic processes to meet current demands of green chemistry concepts and to achieve sustainability in the chemical industry and in other aspects of our everyday life. The advantages of metal-substituted molecular sieves include high surface areas, molecular sieving effects, confinement effects, and active site and morphology variability and stability. The present review aims to comprehensively and critically assess recent advances in the area of tetra- (Ti, Sn, Zr, Hf) and pentavalent (V, Nb, Ta) metal-substituted molecular sieves, which are mainly characterized for their Lewis acidic active sites. Metal oxide molecular sieve materials with properties similar to those of zeolites and siliceous molecular sieve systems are also discussed, in addition to relevant studies on metal-organic frameworks (MOFs) and some composite MOF systems. In particular, this review focuses on (i) synthesis aspects determining active site accessibility and local environment; (ii) advances in active site characterization and, importantly, quantification; (iii) selective redox and isomerization reaction applications; and (iv) photoelectrocatalytic applications.

Hydrothermal Modification of TS-1 Zeolites with Organic Amines and Salts to Construct Highly Selective Catalysts for Cyclopentene Epoxidation

Developing efficient heterogeneous catalysts for cyclic olefins epoxidation is highly attractive for meeting the growing need for various cyclic epoxides. Herein, hierarchical TS-1 zeolite with relatively abundant mesopores and less amount of surface hydroxyl groups was obtained by hydrothermal modification of an as-synthesized TS-1 zeolite with a mixed solution of ammonia, tetrapropylammonium bromide (TPABr) and KCl. The post-modified TS-1 zeolite exhibited much higher catalytic activity (52% conversion) and epoxide selectivity (98%) for the epoxidation of cyclopentene than the conventional TS-1 zeolites. The excellent catalytic activity of the hierarchical TS-1 could be mainly assigned to the enhancement of the mass transport ability and the accessibility of the active Ti species, while the improvement of epoxidation selectivity may be mainly related to the introduction of a certain amount of K+ that can effectively modulate the coordination environment of Ti species as well as the polarity of the zeolite. This work demonstrated that a highly active and selective catalyst for the H2O2-mediated cyclopentene epoxidation could be obtained by concurrently generating mesopore and extinguishing the unfavorable defective hydroxyl groups through the simple hydrothermal treatment of the conventional TS-1 zeolite with a mixed base/salt solution.

Seed-Assisted Synthesis of Hierarchically Structured Nano-Sized Ti-β Zeolites for the Efficient Epoxidation Reaction of Alkenes

The development of nano-sized titanosilicate zeolites with hierarchical structures is crucial in promoting the efficient epoxidation of alkenes. In the present work, nano-sized hierarchical Ti-β (*BEA) zeolites with high crystal yield are prepared by a one-pot nanoseed-assisted approach. The influence of seed size on the resultant Ti-β zeolites is investigated by complementary characterizations, including X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), N₂ adsorption/desorption, UV-vis diffuse reflectance spectroscopy (DRS), and UV Raman spectroscopy. The possible process for the formation of hierarchical Ti-β nanocrystals with the assistance of nanoseeds in the synthesis gel is proposed. Consequentially, the nano-sized hierarchical material prepared by the nanoseed-assisted method shows excellent mass transportation and accessibility to active sites by reducing particle size and constructing hierarchical porosity, hence showing a remarkably enhanced catalytic activity and selectivity in the epoxidation reaction of alkenes. This work will shed light on the efficient preparation of nano-sized titanosilicate zeolites.

Dealumination-controlled strategy mediates Ti–Y zeolite with cooperative active sites for selective oxidations

Hierarchical Ti–Y zeolite, with dual active sites containing framework-substituted Ti and tri-coordinated Al species, was successfully constructed via a dealumination-controlled strategy, which synergistically catalyzed selective oxidations.

Al-Modified Ti-MOR as a robust catalyst for cyclohexanone ammoximation with enhanced anti-corrosion performance

The skeleton desilication accompanied by Ti active sites leaching accounts for the dominant chemical deactivation reasons in the alkali liquid-phase ammoximation, which could be retarded by creating a protective Al-rich shell.

Selective synthesis of epichlorohydrin via liquid-phase allyl chloride epoxidation over a modified Ti-MWW zeolite in a continuous slurry bed reactor

The epoxidation of allyl chloride (ALC) to epichlorohydrin (ECH) with H₂O₂ using a piperidine (PI)-modified Ti-MWW catalyst (Ti-MWW-PI) in a continuous slurry reactor was investigated to develop an efficient reaction system for the corresponding industrial process.

New advances in using Raman spectroscopy for the characterization of catalysts and catalytic reactions

Gaining insight into the mode of operation of heterogeneous catalysts is of great scientific and economic interest. Raman spectroscopy has proven its potential as a powerful vibrational spectroscopic technique for a fundamental and molecular-level characterization of catalysts and catalytic reactions. Raman spectra provide important insight into reaction mechanisms by revealing specific information on the catalysts' (defect) structure in the bulk and at the surface, as well as the presence of adsorbates and reaction intermediates. Modern Raman instrumentation based on single-stage spectrometers allows high throughput and versatility in design of in situ/operando cells to study working catalysts. This review highlights major advances in the use of Raman spectroscopy for the characterization of heterogeneous catalysts made during the past decade, including the development of new methods and potential directions of research for applying Raman spectroscopy to working catalysts. The main focus will be on gas-solid catalytic reactions, but (photo)catalytic reactions in the liquid phase will be touched on if it appears appropriate. The discussion begins with the main instrumentation now available for applying vibrational Raman spectroscopy to catalysis research, including in situ/operando cells for studying gas-solid catalytic processes. The focus then moves to the different types of information available from Raman spectra in the bulk and on the surface of solid catalysts, including adsorbates and surface depositions, as well as the use of theoretical calculations to facilitate band assignments and to describe (resonance) Raman effects. This is followed by a presentation of major developments in enhancing the Raman signal of heterogeneous catalysts by use of UV resonance Raman spectroscopy, surface-enhanced Raman spectroscopy (SERS), and shell-isolated nanoparticle surface-enhanced Raman spectroscopy (SHINERS). The application of time-resolved Raman studies to structural and kinetic characterization is then discussed. Finally, recent developments in spatially resolved Raman analysis of catalysts and catalytic processes are presented, including the use of coherent anti-Stokes Raman spectroscopy (CARS) and tip-enhanced Raman spectroscopy (TERS). The review concludes with an outlook on potential future developments and applications of Raman spectroscopy in heterogeneous catalysis.

Titanosilicate zeolite precursors for highly efficient oxidation reactions

Titanosilicate zeolites are catalysts of interest in the field of fine chemicals. However, the generation and accessibility of active sites in titanosilicate materials for catalyzing reactions with large molecules is still a challenge. Herein, we prepared titanosilicate zeolite precursors with open zeolitic structures, tunable pore sizes, and controllable Si/Ti ratios through a hydrothermal crystallization strategy by using quaternary ammonium templates. A series of quaternary ammonium ions are discovered as effective organic templates. The prepared amorphous titanosilicate zeolites with some zeolite framework structural order have extra-large micropores and abundant octahedrally coordinated isolated Ti species, which lead to a superior catalytic performance in the oxidative desulfurization of dibenzothiophene (DBT) and epoxidation of cyclohexene. It is anticipated that the amorphous prezeolitic titanosilicates will benefit the catalytic conversion of bulky molecules in a wide range of reaction processes.

Titanosilicate zeolite precursors, with open structures of zeolite units and high amounts of catalytically active Ti species, show superior catalytic performance in the oxidative reactions.

Titanium Defective Sites in TS-1: Structural Insights by Combining Spectroscopy and Simulation

Ti silicates, and in particular, titanium silicalite-1 (TS-1), are nowadays important catalysts for several partial oxidation reactions in the presence of aqueous H₂ O₂ as an oxidant. Despite the numerous studies dealing with this material, some fundamental aspects are still unclear. In particular, the structure and the catalytic role of defective Ti sites, other than perfect tetrahedral sites recognized as the main active species, has not been quantitatively discussed in the literature. We assess the structural features of defective Ti sites on the basis of outcomes of electronic spectroscopies, as interpreted through quantum mechanical simulation. Strong evidence is disclosed to support the fact that the most common defective Ti sites, often reported in the TS-1 literature, are monomeric Ti centers that are embedded in the zeolite framework, and which have a distorted octahedral local symmetry.

Controlling the Morphology and Titanium Coordination States of TS-1 Zeolites by Crystal Growth Modifier

Developing an effective strategy to synthesize perfect titanosilicate TS-1 zeolite crystals with desirable morphologies, enriched isolated framework Ti species, and thus enhanced catalytic oxidation properties is a pervasive challenge in zeolite crystal engineering. We here used an amino acid l-carnitine as a crystal growth modifier and ethanol as a cosolvent to regulate the morphologies and the Ti coordination states of TS-1 zeolites. During the hydrothermal crystallization process, the introduced l-carnitine can not only tailor the anisotropic growth rates of zeolite crystals but also induce the formation of uniformly distributed framework Ti species through building a suitable chemical interaction with the Ti precursor species. Condition optimizations could afford the generation of perfect hexagonal plate TS-1 crystals and elongated platelet TS-1 crystals enriched in tetrahedral framework Ti sites (TiO₄) or mononuclear octahedrally coordinated Ti species (TiO₆). Both samples showed significant improvement in catalytic activity for the H₂O₂-mediated epoxidation of alkenes. In particular, the elongated platelet TS-1 enriched in "TiO₆" species afforded the highest activity in 1-hexene epoxidation, with a turnover frequency (TOF) of up to 131 h^-1, which is approximately twice as high as that of the conventional TS-1 zeolite (TOF: 65 h^-1) and even higher than those of the literature-reported TiO₆-containting TS-1 catalysts derived from the hydrothermal post-treatment of TS-1 zeolites. This work demonstrates that the morphologies and the titanium coordination states of TS-1 zeolites can be effectively tuned by directly introducing suitable crystal growth modifiers, thus providing new opportunities for developing highly efficient titanosilicate zeolite catalysts for important catalytic applications.

In Situ Hydrogen Peroxide Production for Selective Oxidation of Benzyl Alcohol over a Pd@Hierarchical Titanium Silicalite Catalyst

Using in situ generated H2O2 is potentially an effective approach for benzyl alcohol selective oxidation. While the microporous titanium silicate (TS-1) supported with Pd is promising for selective oxidation, the Pd particles are preferentially anchored on the external surface, which leads to the problems such as non-uniform dispersion and low thermal stability. Here, we prepared a Pd@HTS-1 catalyst in which the Pd subnanoparticles were encapsulated in the channels of the hierarchical TS-1 (HTS-1), for benzyl alcohol selective oxidation with in situ produced H2O2. We find that the oxidation rate of benzyl alcohol by in situ H2O2 over the Pd@HTS-1 is up to 4268.8 mmol h-1 kgcat -1, and the selectivity of benzaldehyde approaches 100%. In contrast to the conventional Pd/HTS-1, the present Pd@HTS-1 benefits the benzyl alcohol selective oxidation due to the increased dispersion of Pd particles (forming uniformly dispersed subnano-sized particles), as well as the confinement effect and hierarchical porosity of the HTS-1 host. We further suggested that hydrogen peroxide produced in situ from the molecular hydrogen and oxygen over the Pd sites can be spilled over to the framework Ti4+ sites, forming the Ti-OOH active species, which selectively oxidizes the chemisorbed benzyl alcohol to benzaldehyde on the Pd sites.

Deboronation-assisted construction of defective Ti(OSi)3OH species in MWW-type titanosilicate and their enhanced catalytic performance

Regulating the state of titanium species via the deboronation-assisted route is a facile strategy to construct highly efficient titanosilicate catalysts.

Fabrication of a core–shell MFI@TON material and its enhanced catalytic performance for toluene alkylation

Core–shell MFI@TON composites were designed and synthesized as a highly shape-selective catalyst for toluene alkylation by passivating the nonselective acid sites and tuning the diffusion behavior.

An amino acid-assisted approach to fabricate nanosized hierarchical TS-1 zeolites for efficient oxidative desulfurization

A facile amino acid-assisted approach coupled with two-step rota-crystallization has been developed to prepare nanosized hierarchical TS-1 zeolites, which are free of anatase TiO₂ and possess abundant secondary meso-/macropores.

Highly selective 1-pentene epoxidation over Ti-MWW with modified microenvironment of Ti active sites

The hexa-coordinated Ti active sites with the piperidine molecules as ligand significantly accelerate H₂O₂ activation, which effectively improve the catalytic performance of Ti-MWW in the 1-pentene epoxidation reaction.

Hollow core-shell structured TS-1@S-1 as an efficient catalyst for alkene epoxidation

Hollow core-shell structured TS-1@S-1 zeolite (HCS-TS) was prepared successfully for the first time, which exhibited excellent activity in the epoxidation of alkenes. Combining TEM, UV-vis, UV-Raman, pyridine-IR, solid-state MAS NMR, XPS and so on characterization, the improvement in the catalytic performance of hollow core-shell structured TS-1@S-1 zeolite was credited to the newly formed superior active sites: defective Ti(OSi)₃(OH) species in HCS-TS and six-coordinated titanium active species in uncalcined HCS-TS (HCS-TS^P). Interestingly, these two different titanium active species in the samples could be constructed through calcination or not in the same synthesis process. A possible formation mechanism was investigated in detail; it indicated that the hollowing treatment of TS-1 in the first step was conducive to the construction of the new superior active sites in the samples, and there was a synergistic effect on the formation of these active sites between TPAOH and TEOS in the second step of the synthesis process. This strategy is feasible to enhance the catalytic performance of TS-1, and is suitable for the synthesis of TS-1 on an industrial scale.

Mechanistic Insight into Propylene Epoxidation with H2O2 over Titanium Silicalite-1: Effects of Zeolite Confinement and Solvent

Density functional theory (DFT) calculations were performed to investigate the effects of zeolite confinement and solvent on propylene epoxidation with H₂O₂ over the titanium silicalite-1 (TS-1) catalyst. The 144T and 143T cluster models containing typical 10MR channels of TS-1 were constructed to represent the tripodal(2I) and Ti/defect sites. It was found that the confinement of the zeolite pore channel not only impacts the adsorption stability of guest molecules but also alters reaction barriers, as compared to the results obtained based on small cluster models. When dispersion corrections were considered, an enhancement of the adsorption stability of guest molecules was observed because of the important contribution from van der Waals interactions, especially for propylene adsorption. An explicit protic methanol molecule was introduced into the catalytic system to probe the influence of the solvent on propylene epoxidation, based on which a significant enhancement of CH₃OH-H₂O₂ co-adsorption was obtained owing to H-bond formation. More importantly, the energy barrier for H₂O₂ dissociation was largely reduced by ∼13 kcal/mol because of the participation of the methanol in the H-transfer process and the formation of H-bond network, resulting in an alteration of the rate-limiting step. By comparison, adding an aprotic acetonitrile solvent did not have substantial effect on reaction path and kinetics. The calculation results clearly demonstrate the important role of the protic methanol solvent, which not only strengthens the adsorption of guest molecules but also promotes the kinetics for propylene epoxidation with H₂O₂ over TS-1 catalyst.

Selective oxidation of thioanisole by titanium complexes immobilized on mesoporous silica nanoparticles: elucidating the environment of titanium(iv) species

The coordination environment of titanium of the catalysts was investigated by DRUV–vis, Raman and ^47/49Ti MAS-NMR spectroscopies and solid-state electrochemical techniques.

From 3D to 2D zeolite catalytic materials

Research activities and recent developments in the area of three-dimensional zeolites and their two-dimensional analogues are reviewed. Zeolites are the most important industrial heterogeneous catalysts with numerous applications. However, they suffer from limited pore sizes not allowing penetration of sterically demanding molecules to their channel systems and to active sites. We briefly highlight here the synthesis, properties and catalytic potential of three-dimensional zeolites followed by a discussion of hierarchical zeolites combining micro- and mesoporosity. The final part is devoted to two-dimensional analogues developed recently. Novel bottom-up and top-down synthetic approaches for two-dimensional zeolites, their properties, and catalytic performances are thoroughly discussed in this review.

Anionic polyelectrolytes in titanosilicate molecular sieve synthesis towards simultaneously accomplishing low production cost and high catalytic activity

Assisted by an anionic polyelectrolyte of poly(acrylic acid) (PAA), high-performance titanium silicalite-1 (TS-1) could be facilely synthesized at very low usage of expensive organic templates (tetrapropylammonium hydroxide). The presence of PAA helped to incorporate more active Ti species into the TS-1 framework and change the morphology to a plate-like shape, which was beneficial to molecular diffusion among its micropores to access the Ti active sites. Therefore, TS-1 synthesized with PAA showed much higher catalytic activity than that synthesized using the traditional synthesis without polyelectrolytes, and only a 30% usage amount of organic template was used. Moreover, this ultra-cheap catalyst also displayed a better catalytic activity than commercial TS-1 synthesized via a series of complicated preparation processes including alkene epoxidation with hydrogen peroxide as a green oxidant.

Anionic polyelectrolytes can help to directly achieve low-cost, titanium-rich, diffusion restriction-free and 100%-yield titanium silicalite-1.