Key Role of Intramolecular Metal Chelation and Hydrogen Bonding in the Cobalt-Mediated Radical Polymerization ofN-Vinyl Amides

Poly(N-methyl-N-vinylacetamide): A Strong Alternative to PEG for Lipid-Based Nanocarriers Delivering siRNA

Lipid-based nanocarriers have demonstrated high interest in delivering genetic material, exemplified by the success of Onpattro and COVID-19 vaccines. While PEGylation imparts stealth properties, it hampers cellular uptake and endosomal escape, and may trigger adverse reactions like accelerated blood clearance (ABC) and hypersensitivity reactions (HSR). This work highlights the great potential of amphiphilic poly(N-methyl-N-vinylacetamide) (PNMVA) derivatives as alternatives to lipid-PEG for siRNA delivery. PNMVA compounds with different degrees of polymerization and hydrophobic segments, are synthesized. Among them, DSPE (1,2-distearoyl-sn-glycero-3-phosphoethanolamine)-PNMVA efficiently integrates into lipoplexes and LNP membranes and prevents protein corona formation around these lipid carriers, exhibiting stealth properties comparable to DSPE-PEG. However, unlike DSPE-PEG, DSPE-PNMVA24 shows no adverse impact on lipoplexes cell uptake and endosomal escape. In in vivo study with mice, DSPE-PNMVA24 lipoplexes demonstrate no liver accumulation, indicating good stealth properties, extended circulation time after a second dose, reduced immunological reaction, and no systemic pro-inflammatory response. Safety of DSPE-PNMVA24 is confirmed at the cellular level and in animal models of zebrafish and mice. Overall, DSPE-PNMVA is an advantageous substitute to DSPE-PEG for siRNA delivery, offering comparable stealth and toxicity properties while improving efficacy of the lipid-based carriers by minimizing the dilemma effect and reducing immunological reactions, meaning no ABC or HSR effects.

A mononuclear cobalt(III) carboxylate complex with a fully O-based coordination sphere: CoIII-O bond homolysis and controlled radical polymerisation from [Co(acac)2(O2CPh)]

The addition of benzoyl peroxide to [Co^II(acac)₂] in a 1 : 2 ratio selectively produces [Co^III(acac)₂(O₂CPh)], a diamagnetic (NMR) mononuclear Co^III complex with an octahedral (X-ray diffraction) coordination geometry. It is the first reported mononuclear Co^III derivative with a chelated monocarboxylate ligand and an entirely O-based coordination sphere. The compound degrades in solution quite slowly by homolytic Co^III-O₂CPh bond cleavage upon warming above 40 °C to produce benzoate radicals and can serve as a unimolecular thermal initiator for the well-controlled radical polymerisation of vinyl acetate. Addition of ligands (L = py, NEt₃) induces benzoate chelate ring opening and formation of both cis and trans isomers of [Co^III(acac)₂(O₂CPh)(L)] for L = py under kinetic control, then converting quantitatively to the cis isomer, whereas the reaction is less selective and equilibrated for L = NEt₃. The py addition strengthens the Co^III-O₂CPh bond and lowers the initiator efficiency in radical polymerisation, whereas the NEt₃ addition results in benzoate radical quenching by a redox process. In addition to clarifying the mechanism of the radical polymerisation redox initiation by peroxides and rationalizing the quite low efficiency factor for the previously reported [Co^II(acac)₂]/peroxide-initiated organometallic-mediated radical polymerisation (OMRP) of vinyl acetate, this investigation provides relevant information on the Co^III-O homolytic bond cleavage process.

RAFT polymerisation of N-vinylformamide and the corresponding double hydrophilic block copolymers

Polyvinylamine-based double hydrophilic block copolymers are synthesised from RAFT polymerisation of N-vinylformamide.

Oxygen-Triggered Switchable Polymerization for the One-Pot Synthesis of CO2 -Based Block Copolymers from Monomer Mixtures

Switchable polymerization provides the opportunity to regulate polymer sequence and structure in a one-pot process from mixtures of monomers. Herein we report the use of O₂ as an external stimulus to switch the polymerization mechanism from the radical polymerization of vinyl monomers mediated by (Salen)Co^III -R [Salen=N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexanediamine; R=alkyl] to the ring-opening copolymerization (ROCOP) of CO₂ /epoxides. Critical to this process is unprecedented monooxygen insertion into the Co-C bond, as rationalized by DFT calculations, leading to the formation of (Salen)Co^III -O-R as an active species to initiate ROCOP. Diblock poly(vinyl acetate)-b-polycarbonate could be obtained by ROCOP of CO₂ /epoxides with preactivation of (Salen)Co end-capped poly(vinyl acetate). Furthermore, a poly(vinyl acetate)-b-poly(methyl acrylate)-b-polycarbonate triblock copolymer was successfully synthesized by a (Salen)cobalt-mediated sequential polymerization with an O₂ -triggered switch in a one-pot process.

Synthesis of Poly(N-vinylamide)s and Poly(vinylamine)s and Their Block Copolymers by Organotellurium-Mediated Radical Polymerization

Controlled polymerization of acyclic N-vinylamides, that is, N-methyl-N-vinylacetamide (NMVA), N-vinylacetamide (NVA), and N-vinylformamide (NVF), by organotellurium-mediated radical polymerization (TERP) is reported. The corresponding poly(N-vinylamide)s with controlled molecular weight and low dispersity (Ð<1.25) were obtained with high monomer conversion in all cases. This is the first report on the controlled polymerization of NVF. Hydrolysis of the polymers, in particular PNVF, occurred quantitatively under mild reaction conditions, giving structurally controlled poly(vinylamine)s. Block copolymers containing poly(N-vinylamide) and poly(vinylamine) segments were also synthesized in a controlled manner.

Precision design of vinyl amine and vinyl alcohol-based copolymers via cobalt-mediated radical polymerization

Controlling the amount and the distribution of vinyl amine and vinyl alcohol units within a copolymer is attractive to modulate the properties of the parent major industrial homopolymers, i.e. poly(vinyl amine) and poly(vinyl alcohol).

Bis(formylpyrrolyl) cobalt complexes as mediators in the reversible-deactivation radical polymerization of styrene and methyl methacrylate

Bis(formylpyrrolyl) cobalt complexes mediate the reversible-deactivation radical polymerization of styrene and methyl methacrylate.

Bis(formylphenolato)cobalt(II)-Mediated Alternating Radical Copolymerization of tert-Butyl 2-Trifluoromethylacrylate with Vinyl Acetate

The organometallic-mediated radical polymerization (OMRP) of vinyl acetate (VAc) and its OMR copolymerization (OMRcoP) with tert-butyl 2-trifluoromethylacrylate (MAF-TBE) mediated by Co(SAL)₂ (SAL = 2-formylphenolato or deprotonated salicylaldehyde) produced relatively well-defined PVAc and poly(VAc-alt-MAF-TBE) copolymers at moderate temperature (<40 °C) in bulk. The resulting alternating copolymer was characterized by ¹H-, 13C- and 19F-nuclear magnetic resonance (NMR) spectroscopies, and by size exclusion chromatography. The linear first-order kinetic plot, the linear evolutions of the molar mass with total monomer conversion, and the relatively low dispersity (Đ~1.55) of the resulting copolymers suggest that this cobalt complex provides some degree of control over the copolymerization of VAc and MAF-TBE. Compared to the previously investigated cobalt complex OMRP mediators having a fully oxygen-based first coordination sphere, this study emphasizes a few peculiarities of Co(SAL)₂: a lower ability to trap radical chains as compared to Co(acac)₂ and the absence of catalytic chain transfer reactions, which dominates polymerizations carried in the presence of 9-oxyphenalenone cobalt derivative.

Catalyzed Chain Transfer in Vinyl Acetate Polymerization Mediated by 9-Oxyphenalenone Cobalt(II) Complexes

The vinyl acetate (VAc) radical polymerization initiated by V-70 at 30 °C in the presence of [Co^II(OPN)₂] (OPN = deprotonated 9-oxyphenalenone), 1, leads to PVAc of lower molecular weight (MW) than expected for organometallic-mediated radical polymerization (OMRP), whether reversible termination or degenerate transfer conditions are used. This represents the first clear evidence of catalyzed chain transfer (CCT) in VAc polymerization. The bis-pyridine adduct [Co^II(OPN)₂(py)₂], 2, shows a marginally lower polymerization rate and an increased CCT activity relative to 1, whereas the activity decreases with marginal effect on the polymerization rate upon addition of excess py. However, raising the temperature to 80 °C (with AIBN as initiator) led to a low MW polymer even in the presence of a large py excess. The CCT was confirmed by ¹H NMR characterization of the chain ends and by a MALDI-TOF MS analysis of the recovered polymer. The collective trends are consistent with greater CCT activity for the 5-coordinate complex [Co^II(OPN)₂(py)] relative to 1 and 2. The presence of py association/dissociation equilibria relating these three complexes was confirmed by a ¹H NMR investigation.

RAFT synthesis of well-defined PVDF-b-PVAc block copolymers

This article reports that PVDF-b-PVAc diblock copolymers can be synthesized by RAFT polymerization from PVDF macroCTAs and rationalizes this discovery using DFT calculations.

Far beyond primary poly(vinylamine)s through free radical copolymerization and amide hydrolysis

Copolymers bearing various amino groups of predictable compositions are made available through radical copolymerization followed by optimized amide hydrolysis.

Hydrogen-Bonded Multilayer Films Based on Poly(N-vinylamide) Derivatives and Tannic Acid

Layer-by-layer (LbL) assembly based on hydrogen-bonding interactions is generating great interest for biomedical applications because it is composed of neutral polymers, while LbL assembly based on electrostatic interaction requires polycations which may induce toxicity issues. As a neutral polymer, poly(N-vinylamide), which has low toxicity compared to poly(acrylamide), has the potential to fabricate LbL thin films via hydrogen-bonding interactions. Herein we report interpolymer complexes of poly(N-vinylamide)s and natural polyphenol tannic acid to form the multilayered thin film. Poly(N-vinylformamide) and poly(N-vinylacetamide), which are water-soluble and insoluble in acetonitrile, could not form complexes with TA in water. On the other hand, N-alkylated poly(N-vinylamide) such as poly(N-ethyl-N-vinylformamide) and poly(N-methyl-N-vinylacetamide) was soluble in acetonitrile and allowed the LbL assembly to proceed with TA. Furthermore, the QCM frequency shift with films composed of poly(N-ethyl-N-vinylformamide) and TA were stable in water, while those of poly(N-methyl-N-vinylacetamide) and TA were instable in water, possibly because formamide has lower steric hindrance compared to acetamide to allow stronger hydrogen-bonding interactions to take place. Thus, LbL assembly reactions with alkylated poly(N-vinylamide)s and TA were investigated and revealed that poly(N-ethyl-N-formamide) and TA, which are water-soluble, effectively interacted with one another to generate water-stable hydrogen-bonded multilayered films.

Halomethyl-cobalt(bis-acetylacetonate) for the controlled synthesis of functional polymers

We report a novel synthesis of organocobalts bearing a weak C–Co bond, and their utility in the precision synthesis of functional polymers.

Double thermo-responsive hydrogels from poly(vinylcaprolactam) containing diblock and triblock copolymers

The thermally-induced gelation and gel properties of concentrated aqueous solutions of double thermoresponsive poly(N-vinylamide)-based di- and triblock copolymers are studied by rheology.

Thermoresponsive polymer coated gold nanoparticles: from MADIX/RAFT copolymerization of N-vinylpyrrolidone and N-vinylcaprolactam to salt and temperature induced nanoparticle aggregation

In the present contribution, we report the synthesis of thermoresponsive homo and statistical copolymers of N-vinylcaprolactam and N-vinylpyrrolidone and the corresponding responsive gold nanoparticles.

Improved photo-induced cobalt-mediated radical polymerization in continuous flow photoreactors

The implementation of cobalt-mediated radical polymerization (CMRP) for continuous microflow reactor synthesis is described.

Effect of copolymer composition of RAFT/MADIX-derived N-vinylcaprolactam/N-vinylpyrrolidone statistical copolymers on their thermoresponsive behavior and hydrogel properties

RAFT/MADIX statistical copolymerization of N-vinyl lactams enables to tune thermoresponsiveness and rheological properties of copolymers in aqueous solutions.

Poly(N-vinylcaprolactam): a thermoresponsive macromolecule with promising future in biomedical field

Poly(N-vinylcaprolactam) (PNVCL) is a thermoresponsive and biocompatible polymer that raises an increasing interest in the biomedical area, especially in drug delivery systems (DDS) that include micelles, hydrogels, and hybrid particles. The thermoresponsiveness of PNVCL, used alone or in combination with other stimuli- responsive polymers or particles (pH, magnetic field, or chemicals), is often key in the loading and/or release process in these DDS. The renewed focus on this polymer, which is known for decades, is to a large extent due to recent progress in synthetic strategies. Especially, the advent of efficient controlled radical polymerization (CRP) methods for NVCL monomer gives now access to unprecedented well-defined NVCL-based copolymers with unique properties. This Review article addresses up-to-date synthetic aspects, biological features, and biomedical applications of the latest NVCL-containing systems.

Expanding the Scope of Controlled Radical Polymerization via Cobalt-Tellurium Radical Exchange Reaction

Cobalt-mediated radical polymerization (CMRP) and tellurium-mediated radical polymerization (TERP) were combined for the first time, offering new perspectives in the precision design of macromolecular structures. In particular, the present work highlights the benefits of this strategy for the synthesis of novel poly(vinyl acetate)-based block copolymers. A range of well-defined poly(vinyl acetate)s (PVAc) were first produced via CMRP using the bis(acetylacetonato)cobalt(II) complex (Co(acac)₂) as a regulating agent. Substitution of a methyltellanyl moiety for Co(acac)₂ at the ω-chain end of the precursor was then achieved upon treatment with dimethylditelluride. In contrast to the PVAc prepared by TERP, the ones produced by sequential CMRP and Co/Te exchange reaction almost exclusively consist of regular head-to-tail-TeMe chain-end species that can be activated by TERP. Ultimately, a series of monomers problematic in Co(acac)₂-mediated radical polymerization including N-isopropylacrylamide (NIPAM), 2-(dimethylamino)ethyl acrylate (ADAME), n-butyl acrylate (BA), isoprene (IP), and vinylimidazole (NVIm) were polymerized by TERP from the PVAc-TeMe macroinitiators leading to novel diblock copolymers that cannot be made by each technique used separately.

Double thermoresponsive di- and triblock copolymers based on N-vinylcaprolactam and N-vinylpyrrolidone: synthesis and comparative study of solution behaviour

Controlled radical polymerization produces poly(N-vinylamide)s with thermally induced multistep assembly.