Sensing Volatile Pollutants with Spin-Coated Films Made of Pillar[5]arene Derivatives and Data Validation via Artificial Neural Networks

Different types of solvents, aromatic and aliphatic, are used in many industrial sectors, and long-term exposure to these solvents can lead to many occupational diseases. Therefore, it is of great importance to detect volatile organic compounds (VOCs) using economic and ergonomic techniques. In this study, two macromolecules based on pillar[5]arene, named P[5]-1 and P[5]-2, were synthesized and applied to the detection of six different environmentally volatile pollutants in industry and laboratories. The thin films of the synthesized macrocycles were coated by using the spin coating technique on a suitable substrate under optimum conditions. All compounds and the prepared thin film surfaces were characterized by NMR, Fourier transform infrared (FT-IR), elemental analysis, atomic force microscopy (AFM), scanning electron microscopy (SEM), and contact angle measurements. All vapor sensing measurements were performed via the surface plasmon resonance (SPR) optical technique, and the responses of the P[5]-1 and P[5]-2 thin-film sensors were calculated with ΔI/Io × 100. The responses of the P[5]-1 and P[5]-2 thin-film sensors to dichloromethane vapor were determined to be 7.17 and 4.11, respectively, while the responses to chloroform vapor were calculated to be 5.24 and 2.8, respectively. As a result, these thin-film sensors showed a higher response to dichloromethane and chloroform vapors than to other harmful vapors. The SPR kinetic data for vapors validated that a nonlinear autoregressive neural network was performed with exogenous input for the best molecular modeling by using normalized reflected light intensity values. It can be clearly seen from the correlation coefficient values that the nonlinear autoregressive with exogenous input artificial neural network (NARX-ANN) model for dichloromethane converged more successfully to the experimental data compared to other gases. The correlation coefficient values of the dichloromethane modeling results were approximately 0.99 and 0.98 for P[5]-1 and P[5]-2 thin-film sensors, respectively.

A Review of Macrocycles Applied in Electrochemical Energy Storge and Conversion

Macrocycles composed of diverse aromatic or nonaromatic structures, such as cyclodextrins (CDs), calixarenes (CAs), cucurbiturils (CBs), and pillararenes (PAs), have garnered significant attention due to their inherent advantages of possessing cavity structures, unique functional groups, and facile modification. Due to these distinctive features enabling them to facilitate ion insertion and extraction, form crosslinked porous structures, offer multiple redox-active sites, and engage in host-guest interactions, macrocycles have made huge contributions to electrochemical energy storage and conversion (EES/EEC). Here, we have summarized the recent advancements and challenges in the utilization of CDs, CAs, CBs, and PAs as well as other novel macrocycles applied in EES/EEC devices. The molecular structure, properties, and modification strategies are discussed along with the corresponding energy density, specific capacity, and cycling life properties in detail. Finally, crucial limitations and future research directions pertaining to these macrocycles in electrochemical energy storage and conversion are addressed. It is hoped that this review is able to inspire interest and enthusiasm in researchers to investigate macrocycles and promote their applications in EES/EEC.

Spontaneous and Selective Macrocyclization in Nitroaldol Reaction Systems

Through a dynamic polymerization and self-sorting process, a range of lowellane macrocycles have been efficiently generated in nitroaldol systems composed of aromatic dialdehydes and aliphatic or aromatic dinitroalkanes. All identified macrocycles show a composition of two repeating units, resulting in tetra-β-nitroalcohols of different structures. The effects of the building block structure on the macrocyclization process have been demonstrated, and the influence from the solvent has been explored. In general, the formation of the lowellanes was amplified in response to phase-change effects, although solution-phase structures were, in some cases, favored.

Solvent-Dependent Self-Assembly of a Pillar[5]arene-Based Poly-Pseudo-Rotaxane Linked and Threaded by Silver(I) Trifluoroacetate: A Double Role

In the supramolecule area, the fabrication of a new concept called polyrotaxanes or poly-pseudo-rotaxanes remains challenging. We herein report the formation of a poly-pseudo-rotaxane in which the same salt-type guest serves both linking and threading in the resulting structure. The combination of A1/A2-thiopyridyl pillar[5]arene (L) and silver(I) trifluoroacetate in CHCl₃/CH₃OH afforded a one-dimensional (1D) poly-pseudo-rotaxane. In this structure, to our surprise, the AgCF₃CO₂ guest not only links the di-armed L ligands via an infinite -L-Ag-L-Ag- arrangement but also threads into a pillar[5]arene cavity in a dimer form, (AgCF₃CO₂)₂. In contrast, the same reaction in CH₂Cl₂/CH₃OH yielded a simple 1D coordination polymer because an included CH₂Cl₂ molecule in the pillar[5]arene cavity prevents the threading of the silver(I) trifluoroacetate guest. Comparative ¹H- and ¹⁹F-NMR studies support the solvent-dependent poly-pseudo-rotaxane formation at a lower concentration of L.

Pillar[n]arene-Mimicking/Assisted/Participated Carbon Nanotube Materials

The recent progress in pillar[n]arene-assisted/participated carbon nanotube hybrid materials were initially summarized and discussed. The molecular structure of pillar[n]arene could serve different roles in the fabrication of attractive carbon nanotube-based materials. Firstly, pillar[n]arene has the ability to provide the structural basis for enlarging the cylindrical pillar-like architecture by forming one-dimensional, rigid, tubular, oligomeric/polymeric structures with aromatic moieties as the linker, or forming spatially "closed", channel-like, flexible structures by perfunctionalizing with peptides and with intramolecular hydrogen bonding. Interestingly, such pillar[n]arene-based carbon nanotube-resembling structures were used as porous materials for the adsorption and separation of gas and toxic pollutants, as well as for artificial water channels and membranes. In addition to the art of organic synthesis, self-assembly based on pillar[n]arene, such as self-assembled amphiphilic molecules, is also used to promote and control the dispersion behavior of carbon nanotubes in solution. Furthermore, functionalized pillar[n]arene derivatives integrated carbon nanotubes to prepare advanced hybrid materials through supramolecular interactions, which could also incorporate various compositions such as Ag and Au nanoparticles for catalysis and sensing.

Cyclodextrin metal-organic frameworks and derivatives: recent developments and applications

While there is a tremendous amount of scientific research on metal organic frameworks (MOFs) for gas storage/separation, catalysis and energy storage, the development and application of biocompatible MOFs still poses major challenges. In general, they can be synthesised from various biocompatible linkers and metal ions but particularly cyclodextrins (CDs) as cyclic oligosaccharides are an astute choice for the former. Although the field of CD-MOF materials is still in the early stages and their design and fabrication comes with many hurdles, the benefits coming from CDs built in a porous framework are exciting. Versatile host-guest complexation abilities, high encapsulation capacity and hydrophilicity are among the valuable properties inherent to CDs and offer extended and novel applications to MOFs. In this review, we provide an overview of the state-of-the-art synthesis, design, properties and applications of these materials. Initially, a rationale for the preparation of CD-based MOFs is provided, based on the chemical and structural properties of CDs and including their advantages and disadvantages. Further on, the review exhaustively surveys CD-MOF based materials by categorising them into three sub-classes, namely (i) CD-MOFs, (ii) CD-MOF hybrids, obtained via combination with external materials, and (iii) CD-MOF-derived materials prepared under pyrolytic conditions. Subsequently, CD-based MOFs in practical applications, such as drug delivery and cancer therapy, sensors, gas storage, (enantiomer) separations, electrical devices, food industry, and agriculture, are discussed. We conclude by summarizing the state of the art in the field and highlighting some promising future developments of CD-MOFs.

Cyclodextrin-pillar[n]arene hybridized macrocyclic systems

Cyclodextrin (CD) and pillar[n]arene are significant macrocyclic host molecules in supramolecular chemistry, and have either similar or contrasting physicochemical properties, for example, both can provide capable cavities available for recognizing various favorite guest molecules, while they usually possess different solubility in aqueous solutions, and exhibit diverse chiral characteristics. To balance their similarity and differences inherited from each chemical structure and incorporate both advantages, the CD-pillar[n]arene hybrid macrocyclic system was recently developed. In this review, we will focus on the preparation and application of CD-pillar[n]arene hybrid macrocyclic systems. Both noncovalent interactions and covalent bonds were employed in the synthesis strategies of building the hybrid macrocyclic system, which was in the form of host-guest inclusion, self-assembly, conjugated molecules, and polymeric structures. Furthermore, the CD-pillar[n]arene hybrid macrocyclic system has been primarily applied for the removal of organic pollutants from water, induced chirality, as well as photocatalysis due to the integration of both cavities from CD and pillar[n]arene as hybrid hosts and chiral characteristics inherited from their chemical structures.

Hybrid Macrocyclic Polymers: Self-Assembly Containing Cucurbit[m]uril-pillar[n]arene

Supramolecular self-assembly by hybrid macrocycles containing both cucurbit[m]uril (CB[m]) and pillar[n]arene was discussed and summarized in this review. Due to different solubility, diverse-sized cavities, and various driving forces in recognizing guests, the role of CB[m] and pillar[n]arene in such hybrid macrocyclic systems could switch between competitor in capturing specialized guests, and cooperator for building advanced hybridized macrocycles, by controlling their characteristics in host–guest inclusions. Furthermore, both CB[m] and pillar[n]arene were employed for fabricating advanced supramolecular self-assemblies such as mechanically interlocked molecules and supramolecular polymers. In those self-assemblies, CB[m] and pillar[n]arene played significant roles in, e.g., microreactor for catalyzing particular reactions to bridge different small pieces together, molecular “joint” to connect different monomers into larger assemblies, and “stabilizer” in accommodating the guest molecules to adopt a favorite structure geometry ready for assembling.

Controlled release of drug molecules by pillararene-modified nanosystems

Stimuli-responsive nanosystems have attracted the interest of researchers due to their intelligent function of controlled release regulated by a variety of external stimuli and have been applied in biomedical fields. Pillar[n]arenes with the advantages of a rigid structure, electron holes and easy functionalization are considered as excellent candidates for the construction of host-guest nanosystems. In recent years, many pillararene modified nanosystems have been reported in response to different stimuli. In this feature article, we summarize the advance of stimuli-responsive pillararene modified nanosystems for controlled release of drugs from the perspectives of decomposition release and gated release, focusing on the control principles of these nanosystems. We expect that this review can enlighten and guide investigators in the field of stimuli-responsive controlled release.

Fullerene-containing pillar[n]arene hybrid composites

The construction and application of fullerene-containing pillar[n]arene organic–inorganic hybrid composites/systems has been discussed and summarized.

Supramolecular systems prepared using terpyridine-containing pillararene

Recent progresses about the preparation of terpyridine-containing pillararene, as well as the utilization of those building blocks for making external stimulud-responsive supramolecular systems were summarized in this review.

Pillararene-based AIEgens: research progress and appealing applications

The pillararene-based AIEgens and AIE materials, constructed using different assembly forms, show attractive applications in various areas.

Coinage-metal pillarplexes hosts. Insights into host-guest interaction nature and luminescence quenching effects

Host-guest chemistry is a relevant issue in materials science, which encourages further development of versatile host structures. Here the particular features of coinage-metal pillarplexes are evaluated towards formation of host-guest aggregates by the inclusion of 1,8-diaminooctane, as characterized for [M8(LMe)2]4+ (M = Ag, and, Au). The obtained results denotes the main contribution from van der Waals type interaction (50%), followed by a contribution from orbital polarization and electrostatic nature (20% and 30%), involving both orbitalary and electrostatic terms. Throughout the different coinage-metal based hosts (M = Cu, Ag, and Au), a similar interaction energy is found given by the large contribution of the π-surface from the organic ligand backbone to both van de Waals and electrostatic interactions. This suggests that a similar host structure can be obtained for the lighter copper counterpart, retaining similar how-guest features. Moreoves, the [Au8(LMe)2]4+ host exhibits inherent luminescent properties, involving the shortening of Au(i)-Au(i) contacts at the excited state, which is partially avoided when the guest is incorporated, accounting for the observed quenching from titration experiments. This results encourages further exploration of coinage metal hosts in the formation of inclusion complexes.

Stimuli-Responsive Internally Ion-Paired Supramolecular Polymer Based on a Bis-pillar[5]arene Dicarboxylic Acid Monomer

A novel bis-pillar[5]arene dicarboxylic acid self-assembles in the presence of 1,12-diaminododecane to yield overall neutral, internally ion-paired supramolecular polymers. Their aggregation, binding mode, and morphology can be tuned by external stimuli such as solvent polarity, concentration, and base treatment.

Anion-Responsive Pseudo[3]rotaxane from a Difunctionalized Pillar[4]arene[1]quinone and a Bis-Imidazolium Cation

Synthesis of a new functionalized pillar[4]arene[1]quinone and its host-guest complexation with a bis-imidazolium dication was demonstrated. 1D/2D NMR spectroscopic analyses and high-resolution mass spectrometric analyses showed the formation of the pseudo[3]rotaxane assembly upon host-guest complexation. ¹H NMR titration experiments revealed the role of hydrogen bonding motifs in bringing positive cooperativity by comparing the binding constants for the host-guest complexation of pillar[4]arene[1]quinone with a bis-imidazolium guest. Anion-responsiveness of the pseudo[3]rotaxane assembly was also demonstrated.

Sequestration of pyridinium herbicides in plants by carboxylated pillararenes possessing different alkyl chains

We report that the sequestration of pyridinium-containing herbicides can be achieved on plant foliage through the strong supramolecular complexation with water-soluble pillararenes. The host–guest interaction appears to exert a protective effect on the plant growth, thus holding great promise in agricultural application.

We report that the sequestration of pyridinium-containing herbicides can be achieved on plant foliage through the strong supramolecular complexation with water-soluble pillararenes.

Temperature-Dependent and pH-Responsive Pillar[5]arene-Based Complexes and Hydrogen-Bond-Based Supramolecular Pentagonal Boxes in Water

Supramolecular systems in water are of paramount importance and those based on hydrogen bonds are both intriguing and scarce. Here, after studying the peculiar host-guest complexes formed between per-dimethylamino-pillar[5]arene (1) and the bis-sulfonates 2 a-c, we describe the formation of the first hydrogen-bond-based supramolecular pentagonal boxes (SPBs), which are stable in water. These pH-responsive SPBs are constructed from 1 as a body, benzene polycarboxylic acids 3 a,b as lid compounds, and 2 a-c as guests. We demonstrate that encapsulation of 2 a-c in pillar[5]arene 1 and in the highly stable water-soluble SPBs, that is, 1(3 a)₂ and 1(3 b)₂ , is both temperature and pH dependent and, quite interestingly, depends, on the nature of the lid compounds used for capping the boxes even at high pH. We also highlight the difference in the ¹ H NMR characteristics of 2 b and 2 c in the cavity of 1 and the SPBs.

Supramolecular-Macrocycle-Based Crystalline Organic Materials

Supramolecular macrocycles are well known as guest receptors in supramolecular chemistry, especially host-guest chemistry. In addition to their wide applications in host-guest chemistry and related areas, macrocycles have also been employed to construct crystalline organic materials (COMs) owing to their particular structures that combine both rigidity and adaptivity. There are two main types of supramolecular-macrocycle-based COMs: those constructed from macrocycles themselves and those prepared from macrocycles with other organic linkers. This review summarizes recent developments in supramolecular-macrocycle-based COMs, which are categorized by various types of macrocycles, including cyclodextrins, calixarenes, resorcinarenes, pyrogalloarenes, cucurbiturils, pillararenes, and others. Effort is made to focus on the structures of supramolecular-macrocycle-based COMs and their structure-function relationships. In addition, the application of supramolecular-macrocycle-based COMs in gas storage or separation, molecular separation, solid-state electrolytes, proton conduction, iodine capture, water or environmental treatment, etc., are also presented. Finally, perspectives and future challenges in the field of supramolecular-macrocycle-based COMs are discussed.

Dual Responsive Regulation of Host-Guest Complexation in Aqueous Media to Control Partial Release of the Host

The regulation of the concentration of a wide range of small molecules is ubiquitous in biological systems because it enables them to adapt to the continuous changes in the environmental conditions. Herein, we report an aqueous synthetic system that provides an orchestrated, temperature and pH controlled regulation of the complexation between the cyclobis(paraquat-p-phenylene) host (BBox) and a 1,5-dialkyloxynaphthalene (DNP) guest attached to a well-defined dual responsive copolymer composed of N-isopropylacrylamide as thermoresponsive monomer and acrylic acid as pH-responsive monomer. Controlled, partial release of the BBox, enabling control over its concentration, is based on the tunable partial collapse of the copolymer. This colored supramolecular assembly is one of the first synthetic systems providing control over the concentration of a small molecule, providing great potential as both T and pH chromic materials and as a basis to develop more complex systems with molecular communication.

Preparation of a mechanically interlocked polymer from a linear supramolecular polymer

We transformed a linear supramolecular polymer into a mechanically interlocked polymer by photoisomerization.

Rotaxanes comprising cyclic phenylenedioxydiacetamides and secondary mono- and bis-dialkylammonium ions: effect of macrocyclic ring size on pseudorotaxane formation

[2]Rotaxanes, stabilized through multiple and cooperative hydrogen bonding system, were synthesized from dialkylammonium ions and macrocycle possessing two phenylenedioxydiacetamide units and appropriate spacers.

Host-Guest Chemistry in Supramolecular Theranostics

Macrocyclic hosts, such as cyclodextrins, calixarenes, cucurbiturils, and pillararenes, exhibit unparalleled advantages in disease diagnosis and therapy over the past years by fully taking advantage of their host-guest molecular recognitions. The dynamic nature of the non-covalent interactions and selective host-guest complexation endow the resultant nanomaterials with intriguing properties, holding promising potentials in theranostic fields. Interestingly, the differences in microenvironment between the abnormal and normal cells/tissues can be employed as the stimuli to modulate the host-guest interactions, realizing the purpose of precise diagnosis and specific delivery of drugs to lesion sites. In this review, we summarize the progress of supramolecular theranostics on the basis of host-guest chemistry benefiting from their fantastic topological structures and outstanding supramolecular chemistry. These state-of-the-art examples provide new methodologies to overcome the obstacles faced by the traditional theranostic systems, promoting their clinical translations.

Acid/base- and base/acid-switchable complexation between anionic-/cationic-pillar[6]arenes and a viologen ditosylate salt

Two new host-guest complexes between water-soluble anionic pillar[6]arene (WP6) or cationic pillar[6]arene (CP6) and a viologen ditosylate salt G·2TsO were constructed, among which one formed from WP6 and G2+ ions can be controlled by the sequential addition of an acid and a base (HCl and NaOH, respectively), whereas the other fabricated from CP6 and TsO- ions can be switched through the sequential addition of basic and acidic reagents (NaOH and HCl, respectively).

Synthesis and characterisation of rylene diimide dimers using molecular handcuffs

Mechanically interlocked handcuffs provide a strategy to study rylene diimide dimers and to investigate their electronic and magnetic properties.

A strategy for positioning, and loosely connecting, molecules in close proximity using mechanically interlocked handcuffs is described. The strategy is demonstrated using rylene diimides, creating dimeric structures in which two components are linked through pillar[5]arene/imidazolium rotaxanes. Investigation of the resulting molecules demonstrates intriguing and new properties that arise from placing these redox active dye molecules together, allowing interactions, whilst allowing the molecules to separate as required. In particular we observe excimer emission from a perylene diimide dimer handcuff and the formation of an unusual radical anion π-dimer upon double reduction of the same molecule. The latter exhibits a unique visible absorption profile for a PDI-based molecule. We demonstrate the flexibility of our approach by making an unprecedented mixed perylene diimide/naphthalene diimide dimer which also reveals interactions between the two components. Our synthetic strategy facilitates the creation of unusual dimeric structures and allows the investigation of intermolecular interactions and the effects they have on electronic and magnetic properties.

Insights into the synthesis of pillar[5]arene and its conversion into pillar[6]arene

The synthesis of pillar[5]arenes from p-dialkoxybenzene and formaldehyde in the presence of iron(iii) chloride and tetramethylammonium chloride under mild reaction conditions was investigated in detail.

Dual stimuli-responsive bispillar[5]arene-based nanoparticles for precisely selective drug delivery in cancer cells

Bispillar[5]arene nanoparticles exhibited dual stimuli-responsiveness towards both spermine and glutathione, allowing selective drug release in lung cancer cells.

A novel supramolecular polymer π-gel based on bis-naphthalimide functionalized-pillar[5]arene for fluorescence detection and separation of aromatic acid isomers

A pillar[5]arene-based supramolecular polymer π-gel, BPN-G, can selectively identify and separate benzoic acid isomers through rationally introduced multi-intermolecular interactions.

Controlled nitrite anion encapsulation and release in the molecular cavity of decamethylcucurbit[5]uril: solution and solid state studies

Nitrite anion encapsulation was realized using molecular cavitands of decamethylcucurbit[5]urils as molecular receptors.

Dual acid-responsive bola-type supramolecular vesicles for efficient intracellular anticancer drug delivery

Dual acid-responsive bola-type supramolecular vesicles have been successfully constructed for efficient intracellular anticancer drug delivery and controlled release.

Shape induced sorting via rim-to-rim complementarity in the formation of pillar[5, 6]arene-based supramolecular organogels

The first two-component rim-to-rim pillar[6]arene-based supramolecular organogels were prepared. Shape complementarity was found to be an important determinant in the formation of such gels which also show shape-induced sorting in their formation.

Carboxylato-pillar[6]arene-based fluorescent indicator displacement assays for the recognition of monoamine neurotransmitters

The complexation of three cationic fluorescent dye guests with the anionic host carboxylato-pillar[6]arene (WP6) was investigated by optical and NMR spectroscopy. Among the selected indicators – a stilbazolium dye (i1) and two naphthalimide derivatives with positively charged ‘anchor’ groups (i2 and i3) – i1 gave a large turn-on, i2 and i3 a large turn-off fluorescence response to the complexation. The size selectivity of the complex formation of pillararenes was demonstrated by comparing the binding constants of the complexes of the three indicators with WP6 and its smaller homologue, WP5. The systems WP6·i1 and WP6·i2 were tested as indicator displacement assays for the sensing of monoamine neurotransmitters. The WP6·i1 system functioned as a turn-off, the WP6·i2 system as a turn-on sensor for neurotransmitters, and both assays showed a good selectivity to histamine over the other neurotransmitter analytes.

The complexation of three cationic fluorescent dye guests with the anionic host carboxylato-pillar[6]arene (WP6) was investigated by optical and NMR spectroscopy.

Rotational isomerism of the amide units in rotaxanes based on a cyclic tetraamide and secondary ammonium ions

We describe the synthesis of [2]rotaxanes consisting of a macrocyclic tetraamide and mono- and bis-ammonium ions and their conformational isomerism.

Supramolecular delivery systems based on pillararenes

Supramolecular delivery systems (SDSs) fabricated via molecular assembly, which conveniently allow integration of multiple functions in a single system and structural diversity of systems, are a very active research area due to their enormous potential in biomedical applications, including drug delivery, cell imaging, diagnosis, and release monitoring. Pillararenes, a novel type of macrocyclic molecule, are gaining increasing interest as an important component in the construction of SDSs due to their unique structural and chemical properties. This feature article summarizes pillararene-based SDSs constructed via host-guest interactions via four strategies: (1) supramolecular host-guest complexation; (2) self-assembly of supramolecular amphiphiles; (3) self-assembly of amphiphilic supramolecular polymer conjugates; (4) hybridization with other porous materials, such as inorganic materials and metal-organic frameworks (MOFs). The various SDSs based on pillararenes for the delivery of different cargoes from anti-cancer drugs, fluorescent molecules, siRNAs, and insulin to antibiotics are reviewed. Furthermore, future challenges for advanced SDSs based on pillararenes and their broader applications are outlined.

Cyclodextrin-based delivery systems for cancer treatment

Cyclodextrins, one of safe excipients, are able to form host-guest complexes with fitted molecules given the unique nature imparted by their structure in result of a number of pharmaceutical applications. On the other hand, targeted or responsive materials are appealing therapeutic platforms for the development of next-generation precision medications. Meanwhile, cyclodextrin-based polymers or assemblies can condense DNA and RNA in result to be used as genetic therapeutic agents. Armed with a better understanding of various pharmaceutical mechanisms, especially for cancer treatment, researchers have made lots of works about cyclodextrin-based drug delivery systems in materials chemistry and pharmaceutical science. This Review highlights recent advances in cyclodextrin-based delivery systems for cancer treatment capable of targeting or responding to the physiological environment. Key design principles, challenges and future directions, including clinical translation, of cyclodextrin-based delivery systems are also discussed.

Supramolecular chemotherapy based on host-guest molecular recognition: a novel strategy in the battle against cancer with a bright future

Chemotherapy is currently one of the most effective ways to treat cancer. However, traditional chemotherapy faces several obstacles to clinical trials, such as poor solubility/stability, non-targeting capability and uncontrollable release of the drugs, greatly limiting their anticancer efficacy and causing severe side effects towards normal tissues. Supramolecular chemotherapy integrating non-covalent interactions and traditional chemotherapy is a highly promising candidate in this regard and can be appropriately used for targeted drug delivery. By taking advantage of supramolecular chemistry, some limitations impeding traditional chemotherapy for clinical applications can be solved effectively. Therefore, we present here a review summarizing the progress of supramolecular chemotherapy in cancer treatment based on host-guest recognition and provide guidance on the design of new targeting supramolecular chemotherapy combining diagnostic and therapeutic functions. Based on a large number of state-of-the-art studies, our review will advance supramolecular chemotherapy on the basis of host-guest recognition and promote translational clinical applications.