Comparison of chromatographic performance of co-grafted silica using octadecene respectively with vinylpyrrolidone, vinylimidazole and vinylpyridine

Three reversed-phase liquid chromatography (RPLC) stationary phases were obtained by using long-chain 1-octadecene (OD) co-grafted with three short-chain monomers, including N-vinylpyrrolidone (NVP), 1-vinylimidazole (VIm) and 4-vinylpyridine (VPy), respectively (noted as Sil@ODNVP, Sil@ODVIm and Sil@ODVPy). Peak broadening phenomenon in RPLC mode which resulted by short-chain was examined carefully. Compared with Sil@ODNVP, both of Sil@ODVIm and Sil@ODVPy had smaller peak width and higher column efficiency in the separation of 10 polycyclic aromatic hydrocarbons (PAHs), 7 alkyl benzenes, 7 aromatic acids, 7 aromatic esters and 9 phenols. In addition, VPy has the strongest ion exchange capacity than other two short-chains. In this case, we can see that VPy and VIm maybe more suitable to be used as functional monomeric modifiers of new chromatographic stationary phases.

N-Vinyl pyrrolidone and undecylenic acid copolymerized on silica surface as mixed-mode stationary phases for reversed-phase and hydrophilic interaction chromatography

In this work, three new mixed-mode stationary phases were prepared, based on different ratio of N-vinyl pyrrolidone (NVP) copolymerized together with undecylenic acid (UA) on silica microspheres surface without silanization, which named Sil@NVPUA series. The combination of NVP and UA rendered the Sil@NVPUA suitable for reversed-phase liquid chromatography (RPLC) and hydrophilic interaction liquid chromatography (HILIC), and shown excellent methyl, planar, isomers and ion selectivity. Five types of model analytes including eight polycyclic aromatic hydrocarbons, six alkylbenzenes, eight nucleosides and nucleobases, seven ginsenosides and five oxazolidinones can be well separated on this stationary phase. The preparation method of NVP and UA modified silica-based stationary phase is simple, and it also provides a new idea for the design of synthetic polymers to develop mixed-mode chromatography.

Ultra-high-performance liquid chromatography high-resolution mass spectrometry variants for metabolomics research

Ultra-high-performance liquid chromatography high-resolution mass spectrometry (UHPLC-HRMS) variants currently represent the best tools to tackle the challenges of complexity and lack of comprehensive coverage of the metabolome. UHPLC offers flexible and efficient separation coupled with high-sensitivity detection via HRMS, allowing for the detection and identification of a broad range of metabolites. Here we discuss current common strategies for UHPLC-HRMS-based metabolomics, with a focus on expanding metabolome coverage.

Surface properties of stationary phases with embedded polar group based on secondary interaction, zeta potential measurement and linear solvatation energy relationship studies

The chromatographic properties of six non-commercially available stationary phases with ester or phosphodiester functional groups embedded into alkyl chain were studied. Zeta potential values of stationary phases suspended in water, organic solvent and their mixtures were measured. Moreover, the selectivity coefficients were calculated on the basis of the retention factor for the test solutes. Separations were performed under hydrophilic interaction liquid chromatographic conditions. Hydrophobic and polar properties of the investigated columns were compared. Based on the chromatographic properties, polar embedded packing materials were classified. Also two phases with different spacer but the same embedded polar group and alkyl chain (Amino-P-C18 and Diol-P-C18) were used for comparison with homemade materials. Amino-P-C18 stationary phase exhibits positive values of zeta potential which is in accordance with the observed anion exchange properties. The highest negative values of zeta potential were observed for Diol-P-C18, together with cation exchange properties. The highest methylene selectivity, polar selectivity and configurational selectivity were observed for the stationary phase with an ester bond and a phenyl group.

Enantioseparation of mandelic acid on vancomycin column: Experimental and docking study

So far, no detailed view has been expressed regarding the interactions between vancomycin and racemic compounds including mandelic acid. In the current study, a chiral stationary phase was prepared by using 3-aminopropyltriethoxysilane and succinic anhydride to graft carboxylated silica microspheres and subsequently by activating the carboxylic acid group for vancomycin immobilization. Characterization by elemental analysis, Fourier transform infrared spectroscopy, solid-state nuclear magnetic resonance, and thermogravimetric analysis demonstrated effective functionalization of the silica surface. R and S enantiomers of mandelic acid were separated by the synthetic vancomycin column. Finally, the interaction between vancomycin and R/S mandelic acid enantiomers was simulated by Auto-dock Vina. The binding energies of interactions between R and S enantiomers and vancomycin chiral stationary phase were different. In the most probable interaction, the difference in mandelic acid binding energy was approximately 0.2 kcal/mol. In addition, circular dichroism spectra of vancomycin interacting with R and S enantiomers showed different patterns. Therefore, R and S mandelic acid enantiomers may occupy various binding pockets and interact with different vancomycin functions. These observations emphasized the different retention of R and S mandelic acid enantiomers in vancomycin chiral column.

A phenylenediamine-based carbon dot-modified silica stationary phase for hydrophilic interaction chromatography

Red emitting carbon dots derived from p-phenylenediamine were successfully grafted onto the surface of porous silica spheres which served as a new stationary phase for hydrophilic interaction chromatography with enhanced selectivity.

Excess adsorption of acetonitrile and water on MIL-100(Fe) and its potential application in mixed-mode chromatography

Potential application of MIL-100(Fe) to reversed- and-normal phase mixed-mode chromatography was suggested.

Bifunctional Solid Catalyst for Organic Reactions in Water: Simultaneous Anchoring of Acetylacetone Ligands and Amphiphilic Ionic Liquid "Tags" by Using a Dihydropyran Linker

The use of solid catalysts to promote organic reactions in water faces the inherent difficulty of the poor mass-transfer efficiency of organic substances in water, which is often responsible for insufficient reaction and low yields. To solve this problem, the solid surface can be manipulated to become amphiphilic. However, the introduction of surfactant-like moieties onto the surface of silica-based materials is not easy. By using an accessible dihydropyran derivative as a grafting linker, a surfactant-combined bifunctional silica-based solid catalyst that possessed an ionic liquid tail and a metal acetylacetonate moiety was prepared through a mild Lewis-acid-catalyzed ring-opening reaction with a thiol-functionalized silica. The surfactant-combined silica-supported metal acetylacetone catalysts displayed excellent catalytic activity in water for a range of reactions. The solid catalyst was also shown to be recyclable, and was reused several times without significant loss in activity.

The versatility of N,O-dialkylphosphoramidate stationary phase-separations in HILIC, highly aqueous RP LC conditions and purely aqueous mobile phase

The chromatographic properties of N,O-dialkylphosphoramidate stationary phase with an octadecyl chain (Amino-P-C18) were studied.

Synthesis, characterization, and application of a novel multifunctional stationary phase for hydrophilic interaction/reversed phase mixed-mode chromatography

A novel multifunctional stationary phase based on silica gel was synthesised starting from L- isoleucine and 4-phenylbutylamine and evaluated as a hydrophilic interaction/reversed-phase mixed-mode stationary phase for high-performance liquid chromatography (HPLC). The prepared stationary phase was characterized by elemental analysis, infrared spectroscopy (IR), scanning electron microscopy (SEM), Brunauer, Emmett and Teller (BET) and solid-state ¹³C nuclear magnetic resonance (NMR). The mechanisms involved in the chromatographic separation are multi-interaction, including hydrophobic, π-π, hydrogen-bonding, dipole-dipole and ion-dipole interactions. Based on these interactions, successful separation could be achieved among several aromatic compounds having different polarities under both hydrophilic interaction liquid chromatography (HILIC) and reversed phase (RP) condition. Nucleotides/nucleosides were separated in the HILIC mode. The effects of different separation conditions, such as pH value, mobile-phase content, column temperature, buffer concentration and flow rate, on the separation of nucleotides/nucleosides in HILIC mode were investigated. The seven nucleotides/nucleosides were separated within 22min, while six of them were separated within 10min by isocratic elution. To determine the influence of the new multifunctional stationary phase under the RP condition, a number of moderately and weakly polar and nonpolar compounds, such as 10 substituted anilines and eight substituted phenols were separated successfully under the RP condition within 14 and 15min, respectively. Additionally, nine mixtures of polar/nonpolar test compounds were simultaneously separated within 19min, while seven of them were separated within 12min, under HILIC/RP mixed-mode conditions. Chromatographic parameters, such as the retention factor and peak asymmetry factor, were calculated for all of the analytes, while the theoretical plate number was calculated for analytes separated by isocratic elution. Compared to traditional C18 and commercial HILIC columns, the new stationary phase exhibited both HILIC and RPLC performance, and the scope of analyte separation was thus enlarged.

Preparation of a silica stationary phase co-functionalized with Wulff-type phenylboronate and C12 for mixed-mode liquid chromatography

A silica stationary phase was designed and synthesized through the co-functionalization of silica with Wulff-type phenylboronate and C12 for mixed-mode liquid chromatography applications. The as-synthesized stationary phase was characterized by elemental analysis and Fourier Transform-InfraRed Spectroscopy (FT-IR). Retention mechanisms, including boronate affinity (BA), reversed-phase (RP) and anion-exchange (AE), were involved. Retention mechanism switching was easily realized by adjustment of the mobile phase constitution. Cis-diol compounds could be selectively captured under neutral conditions in BA mode and off-line separated in RP mode. Neutral, basic, acidic and amphiprotic compounds were chromatographed on the column in RP chromatography, while inorganic anions were chromatographed in AE chromatography to characterize the mixed-mode nature of the prepared stationary phase. In addition, the RP performance was compared with an octadecyl silica column in terms of column efficiency (N/m), asymmetry factor (A_f), retention factor (k) and resolution (Rs). The prepared stationary phase offered multiple interactions with analytes in addition to hydrophobic interactions under RP elution conditions. Based on the mixed-mode properties, off-line 2D-LC, for selective capture and separation of urinary nucleosides, was successfully realized on a single column, demonstrating its powerful application potential for complex samples.

Boronic Acid-Functionalized Particles with Flexible Three-Dimensional Polymer Branch for Highly Specific Recognition of Glycoproteins

A novel organic-inorganic hybrid particle with high hydrophilicity three-dimensional boronic acid functional polymer branches was facilely synthesized through thiol-ene surface-initiated click reaction, by which the target glycoprotein could be captured selectively in the 5000-fold disrupting protein. This highest selectivity ever reported demonstrated that this boronic acid functionalized particle exhibited great potential in the recognition of cis-diol-containing biomolecules, including the glycoproteins.

Synthesis and characterization of a multimode stationary phase: Congo red derivatized silica in nano-flow HPLC

Congo red derivatized silica has been developed as a mixed mode stationary phase and used for nano-flow HPLC.

A remarkable enhancement of selectivity towards versatile analytes by a strategically integrated H-bonding site containing phase

A double β-alanylated L-glutamide-derived organic phase has been newly designed and synthesized in such a way that integrated H-bonding (interaction) sites make it very suitable for the separation of versatile analytes, including shape-constrained isomers, and nonpolar, polar and basic compounds. The β-alanine residues introduced into two long-chain alkyl group moieties provide ordered polar groups through H-bonding among the amide groups.

A novel green approach for the chemical modification of silica particles based on deep eutectic solvents

A new green synthetic method was developed for the chemical modification of silica materials based on the high dispersibility of silica spheres in DESs and non-volatility of DESs.

Hydrothermal preparation of hybrid carbon/silica monolithic capillary column for liquid chromatography

A simple, easy and economical approach for the preparation of a hybrid carbon/silica monolithic capillary column was described for the first time by using silica monolith as framework in combination with hydrothermal carbonization at 180°C. During the preparation process, formamide was introduced to the reaction solutions to reduce the dissolution rate of monolithic silica skeleton and its optimal concentration was 1.5 M. Fourier transform infrared spectrometry, scanning electron microscopy, energy dispersive X-ray spectrometry, and inverse size exclusion chromatography were carried out to characterize the as-prepared column. The results demonstrated that carbon spheres ranging from 150 to 1000 nm were successfully attached to the surface of silica skeleton. The prepared hybrid carbon/silica column had a permeability of 4.4 × 10(-14) m(2). Chromatographic performance of the column was evaluated by separation of various compounds including alkylbenzenes, nucleosides and bases, and aromatic acids. The column exhibited an efficiency of 75,000 plates/m for butylbenzene at the optimal linear velocity of 0.23 mm/s. The successful separation of these compounds and the study on mechanism indicated that the column can be applied in mixed-mode chromatography.