Ordered hybrids from template-free organosilane self-assembly

Red emissive N-doped carbon dots encapsulated within molecularly imprinted polymers for optosensing of pyrraline in fatty foods

A novel and facile method was proposed for preparation of red emissive N-doped carbon dots encapsulated within molecularly imprinted polymers (RNCDs@MIPs) using a one-pot room-temperature reverse microemulsion polymerization. RNCDs used citric acid and urea as carbon and nitrogen sources by one-step solvothermal synthesis with the optimum emission of 620 nm. Unique optical properties of RNCDs coupled with high selective MIPs make the RNCDs@MIPs conjugate capable to adsorb specific targets of pyrraline (PRL), such a binding event was then transduced to quench fluorescence response signal of the RNCDs. RNCDs@MIPs for PRL showed linearity from 0.1 to 40 μg/L, with a detection limit of 65 ng/L. The RNCDs@MIPs exhibited a good reproducibility of 4.67% obtained from four times of rebinding for PRL. The optosensing probe was successfully applied to the detection of PRL in fatty foods with the spiked recovery of 85.93-106.96%.

Hybrid Xerogels: Study of the Sol-Gel Process and Local Structure by Vibrational Spectroscopy

The properties of hybrid silica xerogels obtained by the sol-gel method are highly dependent on the precursor and the synthesis conditions. This study examines the influence of organic substituents of the precursor on the sol-gel process and determines the structure of the final materials in xerogels containing tetraethyl orthosilicate (TEOS) and alkyltriethoxysilane or chloroalkyltriethoxysilane at different molar percentages (RTEOS and ClRTEOS, R = methyl [M], ethyl [E], or propyl [P]). The intermolecular forces exerted by the organic moiety and the chlorine atom of the precursors were elucidated by comparing the sol-gel process between alkyl and chloroalkyl series. The microstructure of the resulting xerogels was explored in a structural theoretical study using Fourier transformed infrared spectroscopy and deconvolution methods, revealing the distribution of (SiO)₄ and (SiO)₆ rings in the silicon matrix of the hybrid xerogels. The results demonstrate that the alkyl chain and the chlorine atom of the precursor in these materials determines their inductive and steric effects on the sol-gel process and, therefore, their gelation times. Furthermore, the distribution of (SiO)₄ and (SiO)₆ rings was found to be consistent with the data from the X-ray diffraction spectra, which confirm that the local periodicity associated with four-fold rings increases with higher percentage of precursor. Both the sol-gel process and the ordered domains formed determine the final structure of these hybrid materials and, therefore, their properties and potential applications.

A smartphone-integrated optosensing platform based on red-emission carbon dots for real-time detection of pyrethroids

This report described the development of an optosensing platform based on red-emission carbon dots (RCDs) integrated with a smartphone application that, together, can detect pyrethroids in real time. Based on the high stability and selectivity of molecular imprinting technology, RCDs-based optosensing imprinted polymers was obtained by using a one-pot inverse microemulsion surface imprinting method. Lambda-cyhalothrin (LC), which is a pyrethroid pesticide, can interact with the widely distributed -NH₂ groups on the surface of the RCD-based optosensing nanomaterials to achieve fixed-point adsorption. The quantitative detection of pyrethroids in a wide concentration range (1-120 μg/L) could be achieved, and the limit of detection (LOD) was 0.89 μg/L. Furthermore, a portable UV light box combined with a smartphone was used to convert the change in fluorescence of the RCDs-based optosensing nanomaterials into specific values upon adding pyrethroids, and the LOD by using smartphone was 6.66 μg/L. The developed platform has numerous advantages, including low cost, simple operation, high sensitivity, and good specificity, among others, and it achieves on-site visualization and rapid detection.

Novel Organochlorinated Xerogels: From Microporous Materials to Ordered Domains

Hybrid silica xerogels combine the properties of organic and inorganic components in the same material, making them highly promising and versatile candidates for multiple applications. They can be tailored for specific purposes through chemical modifications, and the consequent changes in their structures warrant in-depth investigation. We describe the synthesis of three new series of organochlorinated xerogels prepared by co-condensation of tetraethyl orthosilicate (TEOS) and chloroalkyltriethoxysilane (ClRTEOS; R = methyl [M], ethyl [E], or propyl [P]) at different molar ratios. The influence of the precursors on the morphological and textural properties of the xerogels was studied using ²⁹Si NMR (Nuclear Magnetic Resonance), FTIR (Fourier-Transform Infrared Spectroscopy), N₂, and CO₂ adsorption, XRD (X-ray Diffraction), and FE-SEM (Field-Emission Scanning Electron Microscopy). The structure and morphology of these materials are closely related to the nature and amount of the precursor, and their microporosity increases proportionally to the molar percentage of ClRTEOS. In addition, the influence of the chlorine atom was investigated through comparison with their non-chlorinated analogues (RTEOS, R = M, E, or P) prepared in previous studies. The results showed that a smaller amount of precursor was needed to detect ordered domains (ladders and T₈ cages) in the local structure. The possibility of coupling self-organization with tailored porosity opens the way to novel applications for this type of organically modified silicates.

A catalyst- and additive-free synthesis of alkoxyhydrosiloxanes from silanols and alkoxyhydrosilanes

A convenient method for the selective synthesis of alkoxyhydrosiloxanes that bear SiH and SiOR² groups on the same silicon atom, R¹₃Si-O-SiR³_2-n(OR²)_nH (n = 0, 1, or 2), via a simple catalyst- and additive-free dealcoholization reaction between silanols and alkoxyhydrosilanes has been developed. These alkoxyhydrosiloxanes can be easily converted into Si(OR²)₃-containing siloxanes by zinc catalyzed alkoxylation and alkoxy-containing silphenylene polymers by platinum catalyzed hydrosilylation.

Ferrocene on Insulator: Silane Coupling to a SiO2 Surface and Influence on Electrical Transport at a Buried Interface with an Organic Semiconductor Layer

A silane coupling-based procedure for decoration of an insulator surface containing abundant hydroxy groups by constructing redox-active self-assembled monolayers (SAMs) is described. A newly synthesized ferrocene (Fc) derivative containing a triethoxysilyl group designated FcSi was immobilized on SiO₂/Si by a simple operation that involved immersing the substrate in a toluene solution of the Fc silane coupling reagent and then rinsing the resulting substrate. X-ray photoelectron spectroscopy (XPS) measurements confirmed that the Fc group was immobilized on SiO₂/Si in the Fe(II) state. Cyclic voltammetry measurements showed that the Fc groups were electrically insulated from the Si electrode by the SiO₂ layer. The FcSi on SiO₂/Si structures were found to serve as a good scaffold for formation of organic semiconductor thin films by vacuum thermal evaporation of C8-BTBT (2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene), which is well-known as an organic field-effect transistor (OFET) material. The X-ray diffraction profile indicated that the conventional standing-up conformation of the C8-BTBT molecules perpendicular to the substrates was maintained in the thin films formed on FcSi@SiO₂/Si. Further vacuum thermal evaporation of Au provided an FcSi-based OFET structure with good transfer characteristics. The FcSi-based OFET showed pronounced source-drain current hysteresis between the forward and backward scans. The degree of this hysteresis was varied reversibly via gate bias manipulation, which was presumably accompanied by trapping and detrapping of hole carriers at the Fc-decorated SiO₂ surface. These findings provide new insights into application of redox-active SAMs to nonvolatile OFET memories while also creating new interfaces through junctions with functional thin films, in which the underlying redox-active SAMs play supporting roles.

In vivo study of self-assembled alkylsilane coated degradable magnesium devices

Magnesium (Mg) and its alloys are candidate materials for resorbable implantable devices, such as orthopedic devices or cardiovascular stents. Mg has a number advantages, including mechanical properties, light weight, its osteogenic effects and the fact that its degradation products are nontoxic and naturally present in the body. However, production of H2 gas during the corrosion reaction can cause formation of gas pockets at the implantation site, posing a barrier to clinical applications of Mg. It is therefore desirable to develop methods to control corrosion rate and gas pocket formation around the implants. Here we evaluate the potential of self-assembled multilayer alkylsilane (AS) coatings to control Mg device corrosion and formation of gas pockets in vivo and to assess effects of the AS coatings on the surrounding tissues in a subcutaneous mouse model over a 6 weeks' period. The coating significantly slowed down corrosion and gas pocket formation as evidenced by smaller gas pockets around the AS coated implants (ANOVA; p = 0.013) and decrease in the weight loss values (t test; p = 0.07). Importantly, the microCT and profilometry analyses demonstrated that the coating inhibited the pitting corrosion. Specifically, the roughness of the coated samples was ∼30% lower than uncoated specimen (p = 0.02). Histological assessment of the tissues under the implant revealed no inflammation or foreign body reaction. Overall, our results demonstrate the feasibility of use of the seld assembled AS coatings for reduction of gas pocket formation around the resorbable Mg devices. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 107B: 342-351, 2019.

Poly(3-hexylthiophene) Grafting and Molecular Dilution: Study of a Class of Conjugated Graft Copolymers

A type of graft copolymer based on polysiloxane and regioregular poly(3-hexylthiophene) (P3HT) has been synthesised and its properties have been studied alongside those of its parent conjugated polymer-regioregular P3HT. Electrochemical analysis has revealed more significant changes in conformation of the copolymer film than was observed for P3HT. UV-Vis-NIR spectroelectrochemical investigation provided evidence of improved doping reversibility of the copolymer, despite its marginally increased band gap, as also confirmed by electroconductometric analysis. Evidence has been shown, indicating that polaron mobilities in both P3HT and the copolymer are higher than those of bipolaronic charge carriers, even though both systems exhibit standard doping/dedoping patterns. The grafted copolymer was tested in bulk heterojunction solar cells. Preliminary studies show a great potential of these polymers for application in photovoltaics. Power conversion efficiency of up to 2.46% was achieved despite the dilution of the P3HT chains in the copolymer.

Protecting and Leaving Functions of Trimethylsilyl Groups in Trimethylsilylated Silicates for the Synthesis of Alkoxysiloxane Oligomers

The concept of protecting groups and leaving groups in organic synthesis was applied to the synthesis of siloxane-based molecules. Alkoxy-functionalized siloxane oligomers composed of SiO₄ , RSiO₃ , or R₂ SiO₂ units were chosen as targets (R: functional groups, such as Me and Ph). Herein we describe a novel synthesis of alkoxysiloxane oligomers based on the substitution reaction of trimethylsilyl (TMS) groups with alkoxysilyl groups. Oligosiloxanes possessing TMS groups were reacted with alkoxychlorosilane in the presence of BiCl₃ as a catalyst. TMS groups were substituted with alkoxysilyl groups, leading to the synthesis of alkoxysiloxane oligomers. Siloxane oligomers composed of RSiO₃ and R₂ SiO₂ units were synthesized more efficiently than those composed of SiO₄ units, suggesting that the steric hindrance around the TMS groups of the oligosiloxanes makes a difference in the degree of substitution. This reaction uses TMS groups as both protecting and leaving groups for SiOH/SiO^- groups.

Organosilica hybrid nanomaterials with a high organic content: syntheses and applications of silsesquioxanes

Organic-inorganic hybrid materials garner properties from their organic and inorganic matrices as well as synergistic features, and therefore have recently attracted much attention at the nanoscale. Non-porous organosilica hybrid nanomaterials with a high organic content such as silsesquioxanes (R-SiO_1.5, with R organic groups) and bridged silsesquioxanes (O_1.5Si-R-SiO_1.5) are especially attractive hybrids since they provide 20 to 80 weight percent of organic functional groups in addition to the known chemistry and stability of silica. In the organosilica family, silsesquioxanes (R-SiO_1.5) stand between silicas (SiO₂) and silicones (R₂SiO), and are variously called organosilicas, ormosil (organically-modified silica), polysilsesquioxanes and silica hybrids. Herein, we comprehensively review non-porous silsesquioxane and bridged silsesquioxane nanomaterials and their applications in nanomedicine, electro-optics, and catalysis.

Hot-Press-Assisted Adhesions between Polyimide Films and Titanium Plates Utilizing Coating Layers of Silane Coupling Agents

The development of low material-consuming adhesion techniques for different kinds of materials such as polymers and metals is important for the realization of sustainable societies. This study demonstrates that coating layers, expected to be formed as self-assembled monolayers, of silane coupling agents can act as adhesion layers at the polymer film-metal plate interfaces. Polyimide films were alkaline hydrolyzed to generate carboxy groups on their surfaces, whereas titanium plate surfaces were treated with the aminosilanes to form their coating layers thereon. These modified surfaces were placed in contact with each other and then hot pressed, which resulted in adhesion between them. An examination of the adhesion strength using lap shear tests and surface characterization of the prepared surfaces using X-ray photoelectron spectroscopy and other techniques indicated the formation of ionic bonds and/or amide bonds between the carboxy groups of the PI film surfaces and the amino groups immobilized on the titanium plate surfaces. The activation of the carboxy groups using N-hydroxysuccinimide resulted in adhesion obtaining a water-resistant property, which supported the increase in amide bond formation. On the basis of the results, the adhesion mechanism and the possible breaking points upon the breaking of adhesions are proposed.

New Water Vapor Barrier Film Based on Lamellar Aliphatic-Monoamine-Bridged Polysilsesquioxane

Siloxane-based hybrid lamellar materials with ordered nanostructure units paralleling to the substrate have been widely used for water vapor barrier. However, it is very difficult to control the orientation of the lamellar units at molecular level. In this Research Article, a new lamellar bridged polysilsesquioxane (BPSQ) film, whose voids between lamellae were filled by pendant alkyl chains in the organic bridge, was prepared via the stoichiometric reaction between 3-glycidoxypropyltrimethoxysilane and aliphatic monoamine at 60 °C without catalyst. Experimental evidence obtained from FT-IR, MS, NMR, and GIXRD techniques suggested that the as-prepared BPSQ films were constructed by lamellar units with disordered orientation. Nonetheless, they possessed satisfactory water vapor barrier performance for potassium dihydrogen phosphate (KDP) and deuterated potassium dihydrogen phosphate (DKDP) optical crystals, and the water vapor transmission rate through BPSQ film with thickness of 25 μm was as low as 20.3 g·m(-2)·d(-1). Those results proved that filling the voids between molecular lamellae with alkyl chains greatly weakened the effect of lamellar unit orientation on the vapor barrier property of BPSQ film.

Evaporation-induced self-structuring of organised silica nanohybrid films through cooperative physical and chemical interactions

In this work, we develop the concept of evaporation-induced self-structuring as a novel approach for producing organised films by exploiting cooperative physical and chemical interactions under far-from-equilibrium conditions (spin-coating), using sol-gel precursors with multiple functional groups. Thin films of self-structured silsesquioxane nanohybrids have been deposited by spin coating through the sol-gel hydrolysis and condensation of a bridged organosilane bearing self-assembling urea groups. The resulting nanostructure, investigated by FTIR, AFM and SEM, is shown to be highly dependent on the catalyst used (nucleophilic or acidic), and can be further modulated by varying the spinning rate. FTIR studies revealed the presence of highly organised structures under acidic catalysis due to strong hydrogen bonding between urea groups and hydrophobic interactions between long alkylene chains. The preferential orientation of the urea cross-links parallel to the substrate is shown using polarized FTIR experiments.

Synthesis of silsesquioxane-based element-block amphiphiles and their self-assembly in water

The self-assembly of silsesquioxane-based amphiphiles in water was investigated.

Syntheses and applications of periodic mesoporous organosilica nanoparticles

Periodic Mesoporous Organosilica (PMO) nanomaterials are envisioned to be one of the most prolific subjects of research in the next decade. Similar to mesoporous silica nanoparticles (MSN), PMO nanoparticles (NPs) prepared from organo-bridged alkoxysilanes have tunable mesopores that could be utilized for many applications such as gas and molecule adsorption, catalysis, drug and gene delivery, electronics, and sensing; but unlike MSN, the diversity in chemical nature of the pore walls of such nanomaterials is theoretically unlimited. Thus, we expect that PMO NPs will attract considerable interest over the next decade. In this review, we will present a comprehensive overview of the synthetic strategies for the preparation of nanoscaled PMO materials, and then describe their applications in catalysis and nanomedicine. The remarkable assets of the PMO structure are also detailed, and insights are provided for the preparation of more complex PMO nanoplatforms.

Tunable Fluorescent Silica-Coated Carbon Dots: A Synergistic Effect for Enhancing the Fluorescence Sensing of Extracellular Cu²⁺ in Rat Brain

Carbon quantum dots (CDs) combined with self-assembly strategy have created an innovative way to fabricate novel hybrids for biological analysis. This study demonstrates a new fluorescence platform with enhanced selectivity for copper ion sensing in the striatum of the rat brain following the cerebral calm/sepsis process. Here, the fabrication of silica-coated CDs probes is based on the efficient hybridization of APTES which act as a precursor of organosilane self-assembly, with CDs to form silica-coated CDs probes. The fluorescent properties including intensity, fluorescence quantum yield, excitation-independent region, and red/blue shift of the emission wavelength of the probe are tunable through reliable regulation of the ratio of CDs and APTES, realizing selectivity and sensitivity-oriented Cu(2+) sensing. The as-prepared probes (i.e., 3.33% APTES-0.9 mg mL(-1) CDs probe) show a synergistic amplification effect of CDs and APTES on enhancing the fluorescence signal of Cu(2+) detection through fluorescent self-quenching. The underlying mechanism can be ascribed to the stronger interaction including chelation and electrostatic attraction between Cu(2+) and N and O atoms-containing as well as negatively charged silica-coated CDs than other interference. Interestingly, colorimetric assay and Tyndall effect can be observed and applied to directly distinguish the concentration of Cu(2+) by the naked eye. The proposed fluorescent platform here has been successfully applied to monitor the alteration of striatum Cu(2+) in rat brain during the cerebral calm/sepsis process. The versatile properties of the probe provide a new and effective fluorescent platform for the sensing method in vivo sampled from the rat brain.

Enzymatically degradable hybrid organic-inorganic bridged silsesquioxane nanoparticles for in vitro imaging

We describe biodegradable bridged silsesquioxane (BS) composite nanomaterials with an unusually high organic content (ca. 50%) based on oxamide components mimicking amino acid biocleavable groups. Unlike most bulk BS materials, the design of sub-200 nm nearly monodisperse nanoparticles (NPs) was achieved. These enzymatically degradable BS NPs were further tested as promising imaging nanoprobes.

Organosilica-metallic sandwich materials as precursors for palladium and platinum nanoparticle synthesis

Synthesis of organosilica-metallic sandwiches materials thanks to the immobilization of metallic species in the interlayer space of lamellar bilayer nanostructure.

Getting order in mesostructured thin films, from pore organization to crystalline walls, the case of 3-glycidoxypropyltrimethoxysilane

A new type of hybrid organic–inorganic film showing long-range ordered mesostructure and crystalline pore walls has been successfully prepared.

Photoinduced self-assembly of carboxylic acid-terminated lamellar silsesquioxane: highly functional films for attaching and patterning amino-based ligands

A facile procedure for immobilizing and photopatterning amino ligands onto a multilayer cross-linked COOH-functionalized organosilica film is described. Key features include high functionality, robustness and no restriction on the substrate.

Hydrophilic/hydrophobic film patterning by photodegradation of self-assembled alkylsilane multilayers and its applications

While the photopatterning of self-assembled monolayers (SAMs) has been extensively investigated, much less attention has been given to highly ordered multilayer systems. By being both thicker (0.5-2 μm) and more stable (cross-linked) than SAMs, patterned hybrid multilayers lend themselves more easily to the development of technology-relevant materials and characterization. This paper describes a facile two-step UV approach to patterning an alkylsilane multilayer by combining photoinduced self-assembly for multilayer synthesis and photodegradation through a mask for creating patterns within the film. In this second stage, a spatially resolved removal of the alkyl tail via a photooxidation mechanism took place, yielding regular and uniform silica microdomains. The result was a regular array of features (alkylsiloxane/silica) differing in chemical composition (hybrid/inorganic), ordering (crystal-like/disordered), and wettability (hydrophobic/hydrophilic). Such a photopatterned film was of utility for a range of applications in which water droplets, inorganic crystals, or aqueous polymer dispersions were selectively deposited in the hydrophilic silica microwells.

Azobenzene–siloxane hybrids with lamellar structures from bridge-type alkoxysilyl precursors

Lamellar azobenzene–siloxane hybrids were prepared by self-directed assembly of three types of precursors where mono-, di- and triethoxysilyl groups are bridged by azobenzene groups with propylene linkers.