Effective extraction of larch holocellulose with alkaline deep eutectic solvent and production of furan chemicals with the coordination of temperature-controlled polyoxometalates and metal salt in biphasic system

This study focused on extracting holocellulose from Changbai larch waste, which is rich in hexose and beneficial for furan chemicals production. Various alkaline deep eutectic solvents (DESs) was applied in the extraction of holocellulose. DES composed of lysine (Lys) and 2-aminoethanol (MEA) with strong alkalinity had a superior ability to remove lignin, and the purity of holocellulose could reach 82.7 %. Consequently, a double-acid system formed by a temperature-controlled polyoxometalates catalyst (ChnH3-nPW12, n = 1, 2, 3,) prepared by choline chloride (ChCl) and phosphotungstic acid (H3PW12O40) and different metal salts were used in the hydrolysis of holocellulose to 5-hydroxymethylfurfural (HMF) and 2-furaldehyde (FF) in a two-phase system of water and organic solvent. The yields of HMF and FF reached 43.5 % and 78.2 %, respectively, when ChH2PW12 and AlCl3 were employed under the conditions of 10 mL water/methyl isobutyl ketone (MIBK) (1:9, V:V), 9 h, and 150 °C. ChH2PW12is easy to recycle and can be used up to 5 times. This study offers a novel strategy to retain as much hemicellulose as possible to achieve holocellulose by alkaline DESs, and the one-pot process by the coordination of polyoxometalates and metal salt provides a simultaneous production of high-value furan chemicals from larch waste.

Ultra-Dilute SnCl4-Catalyzed Conversion of Concentrated Glucose to 5-Hydroxymethylfurfural in Aqueous Deep Eutectic Solvent

5-Hydroxymethylfurfural(HMF) is a versatile chemical synthesized from glucose dehydration catalyzed by metal chloride (MClx) in deep eutectic solvents (DESs). However, the low glucose concentration and high catalyst dosage hinder large-scale HMF production. Herein, we report an aqueous DES of tetraethylammonium bromide(TEAB)-glucose for converting concentrated glucose (40 wt %, relative to TEAB) using ultra-dilute SnCl4 (0.25 mol %), achieving a 62 % yield of HMF. Ultra-dilute MClx-catalyzed selective conversion of glucose is feasible only when combining SnCl4 with Br-based DES, which is elucidated by density functional theory and molecular dynamic calculations. Using SnCl4 is essential due to its higher glucose isomerization activity than AlCl3 and CrCl3, which can be attributed to its low-barrier coordination with glucose and its barrier-free separation from fructose. Halide anions in DESs strongly interact with glucose, hindering the MClx-glucose coordination and thereby reducing MClx's activity for glucose isomerization. Consequently, Br-based DESs facilitate higher activity of MClx than Cl-based DESs, due to the weaker interaction between halide anion and glucose. In addition, we elucidated the side reactions including condensation, polymerization, and isomerization, and proposed a reaction network. Our findings clarify the differential activity of MClx and the impact of halide anions in DESs on MClx's activity.

Conversion of Glucose to 5-Hydroxymethylfurfural Using Consortium Catalyst in a Biphasic System and Mechanistic Insights

We found an effective catalytic consortium capable of converting glucose to 5-hydroxymethylfurfural (HMF) in high yields (50%). The reaction consists of a consortium of a Lewis acid (NbCl5) and a Brønsted acid (p-sulfonic acid calix[4]arene (CX4SO3H)), in a microwave-assisted reactor and in a biphasic system. The best result for the conversion of glucose to HMF (yield of 50%) was obtained with CX4SO3H/NbCl5 (5 wt%/7.5 wt%), using water/NaCl and MIBK (1:3), at 150 °C, for 17.5 min. The consortium catalyst recycling was tested, allowing its reuse for up to seven times, while maintaining the HMF yield constant. Additionally, it proposed a catalytic cycle by converting glucose to HMF, highlighting the following two key points: the isomerization of glucose into fructose, in the presence of Lewis acid (NbCl5), and the conversion of fructose into HMF, in the presence of CX4SO3H/NbCl5. A mechanism for the conversion of glucose to HMF was proposed and validated.

Fast microflow kinetics and acid catalyst deactivation in glucose conversion to 5-hydroxymethylfurfural

Continuous flow microreactors operating at short residence times and high temperatures can give high HMF productivity and contribute to process intensification of biorefineries.

Current Approaches to Alkyl Levulinates via Efficient Valorization of Biomass Derivatives

Biomass is a potential non-food, carbon-neutral, and abundant resource, which can be used as an alternative to fossil fuels during the sustainable preparation of various platform chemicals. Alkyl levulinates (ALs) have found widespread application as flavorings, plasticizing agents, and fuel additives, as well as synthetic precursors to various building blocks. Several processes have been investigated to transform biomass and its derivatives into ALs, which mainly include: (i) direct esterification of levulinic acid (LA) with alkyl alcohols and (ii) alcoholysis reactions of renewable biomass feedstocks and their derivatives, including furfuryl alcohol (FAL), chloromethyl furfural (CMF), and saccharides. This review focuses on illustrating the effects of the biomass pretreatment step, catalyst texture, possible mechanisms, acidities, and intermediates on the synthesis of ALs from sustainable resources covering a wide range of intermediates, including diethyl ether (DEE), 4,5,5-triethoxypentan-2-one (TEP), ethoxymethylfuran (EMF), ethyl-D-fructofuranoside (EDFF), and ethyl-D-glucopyranoside (EDGP).

Controlling the Reaction Networks for Efficient Conversion of Glucose into 5-Hydroxymethylfurfural

Biomass-derived hexose constitutes the main component of lignocellulosic biomass for producing value-added chemicals and biofuels. However, the reaction network of hexose is complicated, which makes the highly selective synthesis of one particular product challenging in biorefinery. This Review focuses on the selective production of 5-hydroxymethylfurfural (HMF) from glucose on account of its potential significance as an important platform molecule. The complex reaction network involved in glucose-to-HMF transformations is briefly summarized. Special emphasis is placed on analyzing the complexities of feedstocks, intermediates, (side-) products, catalysts, solvents, and their impacts on the reaction network. The strategies and representative examples for adjusting the reaction pathway toward HMF by developing multifunctional catalysts and promoters, taking advantage of solvent effects and process intensification, and synergizing all measures are comprehensively discussed. An outlook is provided to highlight the challenges and opportunities faced in this promising field. It is expected to provide guidance to design practical catalytic processes for advancing HMF biorefinery.

Preparation and preliminary application of 5-HMF@SiO2 micro-particles

We report an organic–inorganic hybrid composite of surface-modified silica gel with 5-hydroxymethylfurfural, which provided a new promising stationary phase for protein separation.