Nitrate Anion Recognition in Organic-Aqueous Solvent Mixtures by a Bis(triazolium)acridine-Containing [2]Rotaxane

Precise counter anion modulation of the self-assembly behavior-endowed ultrasensitive and specific dual-mode visualization of nitrate

Pt(II) polypyridine complex-based probe exhibits promising performance in anion detection by the change of the absorption and emission properties based on supramolecular self-assembly. However, whether one can develop a modulation strategy of the counter anion to boost the detection sensitivity and anti-interference capability of the Pt(II) complex-based probe remains a big challenge. Here, an effective modulation strategy was proposed by precisely regulating the interaction energy through adjusting the type of the counter anions, and a series of probes have been synthesized by counter anion (X = Cl-, ClO4-, PF6-) exchange in [Pt(tpy)Cl]·X (tpy=2,2':6',2''-terpyridine), and thus the colorimetric-luminescence dual-mode detection toward nitrate was achieved. The optimal [Pt(tpy)Cl]·Cl probe shows superior nitrate detection performance including a limit of detection (LOD) (8.68 nM), rapid response (<0.5 s), an excellent selectivity and anti-interference capability even facing 14 common anions. Moreover, a polyvinyl alcohol (PVA) sponge-based sensing chip loaded with the probe enables the ultra-sensitive detection of nitrate particles with an ultralow detection limit of 7.6 pg, and it was further integrated into a detection pen for the accurate recognition of nitrate particles in real scenarios. The proposed counter-anion modulation strategy is expected to start a new frontier for the exploration of novel Pt(II) complex-based probes.

Exploiting the Mechanical Bond Effect for Enhanced Molecular Recognition and Sensing

The ubiquity of charged species in biological and industrial processes has resulted in ever-increasing interest in their selective recognition, detection, and environmental remediation. Building on the established coordination chemistry principles of the chelate and macrocyclic effects, and host preorganization, supramolecular chemists seek to construct specific 3D binding cavities reminiscent of biotic systems to enhance host-guest binding affinity and selectivity. Mechanically interlocked molecules (MIMs) present a wholly unique platform for synthetic host design, wherein topologies afforded by the mechanical bond enable the decoration of 3D cavities for non-covalent interactions with a range of target guest geometries. Notably, MIM host systems exhibit mechanical bond effect augmented affinities and selectivities for a variety of charged guest species, compared to non-interlocked acyclic and macrocycle host analogs. Furthermore, the modular nature of MIM synthesis facilitates incorporation of optical and electrochemical reporter groups, enabling fabrication of highly sensitive and specific molecular sensors. This review discusses the development of recognition and sensing MIMs, from the first reports in the late 20th century through to the present day, delineating how their topologically preorganized and dynamic host cavities enhance charged guest recognition and sensing, demonstrating the mechanical bond effect as a potent tool in future chemosensing materials.

Crown ether-appended calix[2]triazolium[2]arene as a macrocyclic receptor for the recognition of the H2PO4−anion

We report the synthesis of a crown ether-appended calix[2]triazolium[2]arene receptor that shows excellent selectivity for H₂PO₄⁻and the binding ability and mode of the receptor to H₂PO₄⁻were demonstrated by¹H NMR studies and DFT calculation.

Anthracene-Based Receptors with a Turn-on Fluorescence Response for Nitrate

Herein we describe the design, synthesis, and anion binding properties of bicyclic receptors with two or three anthracenes, which show a turn-on fluorescence response in the presence of nitrate and chaotropic anions in a buffered aqueous solution. The receptor with two anthracenes binds nitrate with 10³ M^-1 affinity and stabilizes it in the inner cavity though electrostatic, hydrogen bonding, and anion-π interactions.

Exploiting 1,4-naphthoquinone and 3-iodo-1,4-naphthoquinone motifs as anion binding sites by hydrogen or halogen-bonding interactions

We describe here the utilization of 1,4-naphthoquinone and 3-iodo-1,4-naphthoquinone motifs as new anion binding sites by hydrogen- or halogen-bonding interactions, respectively. These binding sites have been integrated in bidentate ester based receptors. Emission experiments reveal that both receptors selectively recognize sulfate anions, which induced a remarkable increase of a new emission band attributed to the formation of π-stacking interactions between two 1,4-naphthoquinone units. Absorption spectroscopy and mass spectrometry indicate the disruption of the ester group of the 1,4-naphthoquinone based receptor in the presence of HP₂O₇^3-, H₂PO₄^-, F^-, AcO^- and C₆H₅CO₂^- and in the halogenated receptor with HP₂O₇^3-, F^- and AcO^- anions, while the presence of sulfate anions showed the clasical complexation behaviour. The ¹H-NMR experiment showed a slow exchange process of the receptors with their sulfate complexes. The binding mode of the receptors with sulfate has been studied by DFT calculations along with the Molecular Electrostatic Potential (MEP) surface computational tool that reveals those parts of the receptors which are more suitable for interacting with anions.

The Influence of Binding Site Geometry on Anion-Binding Selectivity: A Case Study of Macrocyclic Receptors Built on the Azulene Skeleton

An understanding of host-guest noncovalent interactions lies at the very heart of supramolecular chemistry. Often a minute change to the structure of a host molecule's binding site can have a dramatic impact on a prospective host-guest binding event, changing the relative selectivity for potential guest molecules. With the overall goal of aiding the rational design of selective and effective receptors for anions, we have studied the influence of small perturbations in binding site geometry for a series of five closely related 20-membered macrocyclic tetra-amide receptors, constructed from two building blocks from a pool of azulene-5,7-bisamide, azulene-1,3-bisamide, and dipicolinic bisamide units. The solid-state structures revealed that the conformational preferences of the free receptors are driven by the inherent preferences of the building blocks, yet in some cases the macrocyclic topology is able to over-ride these to promote pre-organized conformations favorable for anion binding. The solid-state structures of the chloride complexes of these receptors revealed that although all the receptors can adapt to binding to the challenging small Cl^- guest with all the NH groups, only receptors containing azulene-5,7-bisamide units form short and linear, and therefore strong, hydrogen-bonding interactions. These conclusions are further supported by studies in solution. Although all the receptors showed high affinities toward a series of anions (H₂ PO₄^- , PhCO₂^- , Cl^- , and Br^- ), even in a highly competitive polar medium (DMSO/25 % MeOH), only receptors containing azulene-5,7-bisamide units exhibited non-inherent selectivity for Cl^- over PhCO₂^- , breaking the Hofmeister trend of selectivity. The data presented herein highlight the privileged properties of the azulene-5,7-bisamide building block for binding to chloride anions and provide guidelines for the construction of selective and efficient anion receptors with prospective practical applications.

Olefin metathesis reaction as a locking tool for macrocycle and mechanomolecule construction

The present review deals with an updated visit to the olefin metathesis reaction as a powerful tool for the construction of sophisticated macromolecular architectures.

Sulfur Groups Improve the Performance of Triazole- and Triazolium-Based Interaction Units in Anion Binding

An NMR comparative study of 1,2,3-triazole and triazolium anion recognition units containing sulfoxide, sulfone, and sulfoximine groups at C₄ unveils an enhancement in binding ability up to ≈1 kcal/mol in acetone-d₆ correlated with a theoretical increase of H₅ acidity. DFT calculations provide insight into binding modes in line with experimental data for these receptors.

Threading of various ‘U’ shaped bidentate axles into a heteroditopic macrocyclic wheel via NiII/CuII templation

The Ni^II/Cu^II templated threading of various terminal group embedded ‘U’ shaped axles into an amido–amine macrocyclic wheel towards the development of a new generation of [2]pseudorotaxanes via [3 + 2] coordination assisted by other non-covalent interactions.

Copper-assisted azide–alkyne cycloaddition chemistry as a tool for the production of emissive boron difluoride 3-cyanoformazanates

Emissive BF₂ complexes of 3-cyanoformazanates produced using CuAAC chemistry are described. Highlights include ferrocene-substituted derivatives with ‘turn-on’ fluorescence upon oxidation and a water soluble derivative with application as a cell-imaging agent.

Halogen bonding rotaxanes for nitrate recognition in aqueous media

Incorporating halogen bonding into an interlocked [2]rotaxane anion host system results in unprecedented nitrate recognition in 90% water.

Selective Nitrate Recognition by a Halogen-Bonding Four-Station [3]Rotaxane Molecular Shuttle

The synthesis of the first halogen bonding [3]rotaxane host system containing a bis-iodo triazolium-bis-naphthalene diimide four station axle component is reported. Proton NMR anion binding titration experiments revealed the halogen bonding rotaxane is selective for nitrate over the more basic acetate, hydrogen carbonate and dihydrogen phosphate oxoanions and chloride, and exhibits enhanced recognition of anions relative to a hydrogen bonding analogue. This elaborate interlocked anion receptor functions via a novel dynamic pincer mechanism where upon nitrate anion binding, both macrocycles shuttle from the naphthalene diimide stations at the periphery of the axle to the central halogen bonding iodo-triazolium station anion recognition sites to form a unique 1:1 stoichiometric nitrate anion-rotaxane sandwich complex. Molecular dynamics simulations carried out on the nitrate and chloride halogen bonding [3]rotaxane complexes corroborate the (1) H NMR anion binding results.

[C-H···anion] interactions mediate the templation and anion binding properties of topologically non-trivial metal-organic structures in aqueous solutions

Two synthetic approaches-temperature variation and anion templation-allowed for the selective formation of a [2]catenane ([2]C4+ ) or a trefoil knot (TK6+ ), or for the enhanced formation of a Solomon link (SL8+ ), all from a simple set of starting materials (Zn(ii) acetate, diformylpyridine (DFP) and a diamino-2,2'-bipyridine (DAB)) in mixed aqueous solutions. The catenane formed exclusively at 90 °C in a 1 : 1 mixed solvent of D2O and MeOD. In the presence of bromide ion as template, TK6+ formed exclusively at 50 °C in the same solvent. In the solid state, TK6+ hosts two bromide ions in its central cavity by forming six Csp2 -H hydrogen bonds. In D2O, TK6+ , which was originally prepared as a trifluoroacetate (TFA) salt, was found to exchange two TFA counterions for two monovalent anions of different sizes and shapes, which lodged within the knot's central cavity. In contrast to bromide, the larger triflate anion (CF3SO3-) promoted the formation of SL8+ , which was characterized by 1H NMR spectroscopy and mass spectrometry. Two dimensional heteronuclear 19F-1H-HOSEY NMR experiments detected CH···F interactions inside the cavity of SL8+ . Thus, the product distribution of this dynamic link forming system is sensitive to temperature and the size and shape of the anion template, and one of the products, TK6+ , is capable of binding a variety of monovalent anions in D2O with high affinity (with log β2 values of 4 to 6 being typical).