Evidence of Amine-CO2Interactions in Two Pillared-Layer MOFs Probed by X-ray Crystallography

[BMIM][X] Ionic Liquids Supported on a Pillared-Layered Metal-Organic Framework: Synthesis, Characterization, and Adsorption Properties

Combining ionic liquids (ILs) and metal-organic frameworks (MOFs) can be an intriguing opportunity to develop advanced materials with different adsorption capabilities for environmental applications. This study reports the preparation and characterization of a 3D pillared-layered compound, namely, [Zn2(tz)2(bdc)] (CIM91), formed by 1,2,4-triazole (Htz) and 1,4-benzenedicarboxylic acid (H2bdc) ligands. Then, various loadings of the water-stable and hydrophobic IL, 1-n-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]), and the water-soluble 1-n-butyl-3-methylimidazolium chloride ([BMIM][Cl]) were incorporated into CIM91. Detailed characterization by X-ray powder diffraction (XRD), FT-IR spectra, scanning electron microscopy (SEM), Energy dispersive X-ray (EDX) analysis, N2 adsorption measurements, and thermogravimetric analysis confirmed the formation of [BMIM][X]/CIM91 composites and the structural stability of the MOF after the incorporation of the ionic liquids. CO2 adsorption-desorption analysis was experimentally carried out for all the materials at 298 K and 318 K, demonstrating a great enhancement in the CO2 adsorption properties of the sole MOF CIM91, particularly by including [BMIM][PF6] species in its structure with a double isosteric heat of CO2 adsorption. The composites were also tested for the adsorption of methylene blue (MB) dye. The results indicate that the incorporation of [BMIM][X] into CIM91 can substantially modify the adsorption properties of the MOF. The influence of the nature of the [BMIM][X] anions on these properties has also been analyzed.

An anthracene-based microporous metal–organic framework for adsorbing CO2 and detecting TNP sensitivity

An anthracene-based microporous MOF of CUST-607 was synthesized by a solvothermal method. CUST-607 possesses a large surface area and shows strong adsorption toward CO2. In the fluorescence experiments, CUST-607 exhibits total quenching for TNP.

Insights into Paraben Adsorption by Metal-Organic Frameworks for Analytical Applications

Metal-organic frameworks (MOFs) are attractive materials used as sorbents in analytical microextraction applications for contaminants of emerging concern (CECs) from environmental liquid matrices. The demanding specs for a sorbent in the analytical application can be comprehensively studied by considering the interactions of the target analytes with the frameworks by the use of single-crystal X-ray diffraction, computational analysis, and adsorption studies, including the kinetic ones. The current study intends a better understanding of the interactions of target CECs (particularly, propylparaben (PPB) as a model) and three Zn-based layered pillared MOFs: CIM-81 [Zn₂(tz)₂(bdc)] (Htz = 1,2,4-triazole and H₂bdc = 1,4-benzenedicarboxylic acid) and their amino derivatives [Zn₂(NH₂-tz)₂(bdc)] CIM-82 and [Zn₂(tz)₂(NH₂-bdc)] CIM-83 (NH₂-Htz = 3-amino-1,2,4-triazole and NH₂-H₂bdc = 2-amino-1,4-benzenedicarboxylic acid). The crystal structures of the two solvate compounds (dma@CIM-81 (dma = dimethylacetamide) and acetone@CIM-81) were solved by single-crystal X-ray diffraction to determine the points of interaction between the framework and the guest molecules. They also served as a starting point for the computational modeling of the PPB@CIM-81 compound, showing that up to two PPB molecules can be hosted in one of the pores, while only one can be trapped in the second pore type, leading to a maximum theoretical capacity of 291.9 mg g^-1. This value is close to the value obtained by the adsorption isotherm experiment for CIM-81 (283 mg g^-1). This value is, by far, higher than those previously reported for other materials for the removal of PPB from water, and also higher than the experimental values obtained for CIM-82 (54 mg g^-1) and CIM-83 (153 mg g^-1). The kinetics of adsorption is not very fast, with uptake of about 40% in 3 h, although a 70% release in methanol is achieved in 1 h. In addition, a further comparison of performance in analytical microextraction (requiring only 10 mg of CIM-81) was carried out together with chromatographic analysis to support all insights attained, with the method being able to monitor CECs as low as μg L^-1 levels in complex environmental water samples, thus performing successfully for water monitoring even in multicomponent scenarios.

MOFs based on the application and challenges of perovskite solar cells

In recent years, perovskite solar cells (PSCs) have attracted much attention because of their high energy conversion efficiency, low cost, and simple preparation process. Up to now, the photoelectric conversion efficiency of solar cells has been increased from 3.8% to 25.5%. Metal–organic skeleton-derived metal oxides and their composites (MOFs) are widely considered for application in PSCs due to their low and flat charge/discharge potential plateau, high capacity, and stable cycling performance. By combining MOFs and PSCs, based on the composition materials of perovskite film, electron transport layer, hole transport layer, and interfacial interlayer of PSCs, this article discusses the photovoltaic performance or structure optimization effect of MOFs in each function layer, which is of great significance to improve the photovoltaic performance of the cell. The problems faced by MOFs on perovskite solar cells are summarized, the next research directions are discussed, and the development of this crossover area of MOFs–PSC is foreseen to accelerate the comprehensive research and popularization of MOFs on PSCs.

Four Novel d10 Metal-Organic Frameworks Incorporating Amino-Functionalized Carboxylate Ligands: Synthesis, Structures, and Fluorescence Properties

By employment of amino-functionalized dicarboxylate ligands to react with d10 metal ions, four novel metal-organic frameworks (MOFs) were obtained with the formula of {[Cd(BCPAB)(μ 2-H2O)]} n (1), {[Cd(BDAB)]∙2H2O∙DMF} n (2), {[Zn(BDAB)(BPD)0.5(H2O)]∙2H2O} n (3) and {[Zn(BDAB)(DBPB)0.5(H2O)]∙2H2O} n (4) (H2BCPAB = 2,5-bis(p-carbonylphenyl)-1-aminobenzene; H2BDAB = 1,2-diamino-3,6-bis(4-carboxyphenyl)benzene); BPD = (4,4'-bipyridine); DBPB = (E,E-2,5-dimethoxy-1,4-bis-[2-pyridin-vinyl]-benzene; DMF = N,N-dimethylformamide). Complex 1 is a three-dimensional (3D) framework bearing seh-3,5-Pbca nets with point symbol of {4.62}{4.67.82}. Complex 2 exhibits a 4,4-connected new topology that has never been reported before with point symbol of {42.84}. Complex 3 and 4 are quite similar in structure and both have 3D supramolecular frameworks formed by 6-fold and 8-fold interpenetrated 2D coordination layers. The structures of these complexes were characterized by single crystal X-ray diffraction (SC-XRD), thermal gravimetric analysis (TGA) and powder X-ray diffraction (PXRD) measurements. In addition, the fluorescence properties and the sensing capability of 2-4 were investigated as well and the results indicated that complex 2 could function as sensor for Cu2+ and complex 3 could detect Cu2+ and Ag+ via quenching effect.

Engineered Bifunctional Luminescent Pillared-Layer Frameworks for Adsorption of CO2 and Sensitive Detection of Nitrobenzene in Aqueous Media

Through a dual-ligand synthetic approach, five isoreticular primitive cubic (pcu)-type pillared-layer metal-organic frameworks (MOFs), [Zn₂ (dicarboxylate)₂ (NI-bpy-44)]⋅x DMF⋅y H₂ O, in which dicarboxylate=1,4-bdc (1), Br-1,4-bdc (2), NH₂ -1,4-bdc (3), 2,6-ndc (4), and bpdc (5), have been engineered. MOFs 1-5 feature twofold degrees of interpenetration and have open pores of 27.0, 33.6, 36.8, 52.5, and 62.1 %, respectively. Nitrogen adsorption isotherms of activated MOFs 1'-5' at 77 K all displayed type I adsorption behavior, suggesting their microporous nature. Although 1' and 3'-5' exhibited type I adsorption isotherms of CO₂ at 195 K, MOF 2' showed a two-step gate-opening sorption isotherm of CO₂ . Furthermore, MOF 3' also had a significant influence of amine functions on CO₂ uptake at high temperature due to the CO₂ -framework interactions. MOFs 1-5 revealed solvent-dependent fluorescence properties; their strong blue-light emissions in aqueous suspensions were efficiently quenched by trace amounts of nitrobenzene (NB), with limits of detection of 4.54, 5.73, 1.88, 2.30, and 2.26 μm, respectively, and Stern-Volmer quenching constants (K_sv ) of 2.93×10³ , 1.79×10³ , 3.78×10³ , 4.04×10³ , and 3.21×10³  m^-1 , respectively. Of particular note, the NB-included framework, NB@3, provided direct evidence of the binding sites, which showed strong host-guest π-π and hydrogen-bonding interactions beneficial for donor-acceptor electron transfer and resulting in fluorescence quenching.

Porous Metal-Organic Polyhedra: Morphology, Porosity, and Guest Binding

Designing porous materials which can selectively adsorb CO₂ or CH₄ is an important environmental and industrial goal which requires an understanding of the host–guest interactions involved at the atomic scale. Metal–organic polyhedra (MOPs) showing permanent porosity upon desolvation are rarely observed. We report a family of MOPs (Cu-1a, Cu-1b, Cu-2), which derive their permanent porosity from cavities between packed cages rather than from within the polyhedra. Thus, for Cu-1a, the void fraction outside the cages totals 56% with only 2% within. The relative stabilities of these MOP structures are rationalized by considering their weak nondirectional packing interactions using Hirshfeld surface analyses. The exceptional stability of Cu-1a enables a detailed structural investigation into the adsorption of CO₂ and CH₄ using in situ X-ray and neutron diffraction, coupled with DFT calculations. The primary binding sites for adsorbed CO₂ and CH₄ in Cu-1a are found to be the open metal sites and pockets defined by the faces of phenyl rings. More importantly, the structural analysis of a hydrated sample of Cu-1a reveals a strong hydrogen bond between the adsorbed CO₂ molecule and the Cu(II)-bound water molecule, shedding light on previous empirical and theoretical observations that partial hydration of metal−organic framework (MOF) materials containing open metal sites increases their uptake of CO₂. The results of the crystallographic study on MOP–gas binding have been rationalized using DFT calculations, yielding individual binding energies for the various pore environments of Cu-1a.

We report a family of metal−organic polyhedra (MOP), which derive their permanent porosity from cavities between packed cages rather than from within the polyhedra. The relative stabilities of these MOP structures are rationalized by considering their weak nondirectional packing interactions using Hirshfeld surface analysis. A detailed structural investigation into the adsorption of CO₂ and CH₄ is reported using in situ X-ray and neutron diffraction, coupled with DFT calculations.

Two anthracene chromophore based metal–organic frameworks for gas adsorption and promising nitro aromatic sensing

Two novel metal–organic frameworks (MOFs) have been synthesized under solvothermal conditions. Studies on luminescence sensing show 1 and 2 are highly selective and recyclable in the detection of nitroaromatic explosives, especially for TNP.

Application of a Pillared-Layer Zn-Triazolate Metal-Organic Framework in the Dispersive Miniaturized Solid-Phase Extraction of Personal Care Products from Wastewater Samples

The pillared-layer Zn-triazolate metal-organic framework (CIM-81) was synthesized, characterized, and used for the first time as a sorbent in a dispersive micro-solid phase extraction method. The method involves the determination of a variety of personal care products in wastewaters, including four preservatives, four UV-filters, and one disinfectant, in combination with ultra-high performance liquid chromatography and UV detection. The CIM-81 MOF, constructed with an interesting mixed-ligand synthetic strategy, demonstrated a better extraction performance than other widely used MOFs in D-µSPE such as UiO-66, HKUST-1, and MIL-53(Al). The optimization of the method included a screening design followed by a Doehlert design. Optimum conditions required 10 mg of CIM-81 MOF in 10 mL of the aqueous sample at a pH of 5, 1 min of agitation by vortex and 3 min of centrifugation in the extraction step; and 1.2 mL of methanol and 4 min of vortex in the desorption step, followed by filtration, evaporation and reconstitution with 100 µL of the initial chromatographic mobile phase. The entire D-µSPE-UHPLC-UV method presented limits of detection down to 0.5 ng·mL-1; intra-day and inter-day precision values for the lowest concentration level (15 ng·mL-1)-as a relative standard deviation (in %)-lower than 8.7 and 13%, respectively; average relative recovery values of 115%; and enrichment factors ranging from ~3.6 to ~34. The reuse of the CIM-81 material was assessed not only in terms of maintaining the analytical performance but also in terms of its crystalline stability.

Single-side and double-side swing behaviours of a flexible porous coordination polymer with a rhombic-lattice structure

A rhombic porous coordination polymer can show special reversible–irreversible structural transformations with single-side and double-side swing, as well as sophisticated bond reconstitution behaviours.

Paddlewheel SBU based Zn MOFs: Syntheses, Structural Diversity, and CO₂ Adsorption Properties

Four Zn metal⁻organic frameworks (MOFs), {[Zn₂(2,6-ndc)₂(2-Pn)]·DMF}n (1), {[Zn₂(cca)₂(2-Pn)]·DMF}n (2), {[Zn₂(thdc)₂(2-Pn)]·3DMF}n (3), and {[Zn₂(1,4-ndc)₂(2-Pn)]·1.5DMF}n (4), were synthesized from zinc nitrate and N,N'-bis(pyridin-2-yl)benzene-1,4-diamine (2-Pn) with naphthalene-2,6-dicarboxylic acid (2,6-H₂ndc), 4-carboxycinnamic acid (H₂cca), 2,5-thiophenedicarboxylic acid (H₂thdc), and naphthalene-1,4-dicarboxylic acid (1,4-H₂ndc), respectively. MOFs 1⁻4 were all constructed from similar dinuclear paddlewheel {Zn₂(COO)₄} clusters and resulted in the formation of three kinds of uninodal 6-connected non-interpenetrated frameworks. MOFs 1 and 2 suit a topologic 4⁸·6⁷-net with 17.6% and 16.8% extra-framework voids, respectively, 3 adopts a pillared-layer open framework of 4⁸·6⁶·8-topology with sufficient free voids of 39.9%, and 4 features a pcu-type pillared-layer framework of 412·6³-topology with sufficient free voids of 30.9%. CO₂ sorption studies exhibited typical reversible type I isotherms with CO₂ uptakes of 55.1, 84.6, and 64.3 cm³ g-1 at 195 K and P/P₀ =1 for the activated materials 1', 2', and 4', respectively. The coverage-dependent isosteric heat of CO₂ adsorption (Qst) gave commonly decreased Qst traces with increasing CO₂ uptake for all the three materials and showed an adsorption enthalpy of 32.5 kJ mol-1 for 1', 38.3 kJ mol-1 for 2', and 23.5 kJ mol-1 for 4' at zero coverage.

Temperature-induced self-assembly of two kinds Zn(ii)-based coordination polymers with luminescence properties for application in sensing and adsorption

Temperature-induced self-assembly of coordination polymers (CPs) is of great importance for structural tunability and is quite necessary for further research on structure–property relationships.

Enhanced gas separation performance of an ultramicroporous pillared-layer framework induced by hanging bare Lewis basic pyridine groups

An ultramicroporous pillared-layer framework exhibits extra high CO₂ and C₂ hydrocarbons over CH₄ separation performance under ambient conditions induced by hanging bare Lewis basic pyridine groups on the pore surface.

Cage amines in the metal–organic frameworks chemistry

Nitrogen-rich porous materials have outstanding gas sorption and separation capacity. Using cage amines in the synthesis of metal–organic frameworks is a simple approach for generating the free nitrogen donor centers within the channels of porous materials without the post-synthetic modification. 1,4-Diazabicyclo[2.2.2]octane has a linear arrangement of nitrogen centers and can be used as a linear linker for the design of porous MOF materials. Urotropine has four nitrogen atoms and can act as a tetrahedral four-connected, pyramidal three-connected or bent two-connected linker. Such a diversity of coordination possibilities enriches the structural chemistry of MOFs and allows obtaining the frameworks with unique secondary building units and topology. The presence of cage amines in the structure affects the sorption characteristics of the materials. They demonstrate high selectivity to CO2 and can participate as a heterogeneous base catalyst in the organic reactions. Besides that the cage-amine based metal–organic frameworks demonstrate photoluminescent properties and can be used as nanoreactors for photochemical transformations. These compounds are also an important object of thermodynamic studies helping us better understand the nature of host–guest interaction in the supramolecular systems.

A four-fold interpenetrated metal-organic framework as a fluorescent sensor for volatile organic compounds

A four-fold interpenetrated three dimensional (3D) metal-organic framework, [Cd2(tppe)(bpdc)2(H2O)]·solvent (1), was synthesized with a tetraphenylethene (TPE)-based ligand, 1,1,2,2-tetrakis(4-(pyridin-4-yl)phenyl)ethene (TPPE). This complex exhibits intense blue luminescence and is sensitive to toxic volatile organic compounds (VOCs).

An aminopyrimidine-functionalized cage-based metal–organic framework exhibiting highly selective adsorption of C2H2 and CO2 over CH4

An aminopyrimidine-functionalized cage-based metal–organic framework has been synthesized, which exhibited exceptionally high C₂H₂ and CO₂ uptake as well as impressive adsorption selectivities towards C₂H₂ and CO₂ over CH₄.

A luminescent dye@MOF as a dual-emitting platform for sensing explosives

A luminescent dye@MOFviaion-exchange of cationic dyes was used as a probe to sense explosives by tuning the energy transfer between two different emissions.