One-Pot Synthesis of Zeolitic Strong Solid Bases: A Family of Alkaline-Earth Metal-Containing Silicalite-1

Stable Mg Single-Atom Solid Base Catalysts Anchored on Metal-Organic Framework-Derived Nitrogen-Doped Carbon

Solid base catalysts are widely used in the chemical industry owing to their advantages of environmental friendliness and easy separation. However, their application is limited by basic site aggregation and poor stability. In this study, we report the preparation of magnesium (Mg) single-atom catalysts with high activity and stability by a sublimation-trapping strategy. The Mg net was sublimated as Mg vapor at 620 °C, subsequently transported through argon, and finally trapped on the defects of nitrogen-doped carbon derived from metal-organic framework ZIF-8, producing Mg1/NC. Because of the atomically dispersed Mg sites, the obtained Mg1/NC exhibits high catalytic activity and stability for Knoevenagel condensation of benzaldehyde with malononitrile, which is a typical base-catalyzed reaction. The Mg1/NC catalyst achieves a high efficiency with a turnover frequency of 49.6 h-1, which is much better than that of the traditional counterpart MgO/NC (7.7 h-1). In particular, the activity of Mg1/NC shows no decrease after five catalytic cycles, while that of MgO/NC declines due to the instability of basic sites.

Advanced zeolite and ordered mesoporous silica-based catalysts for the conversion of CO2 to chemicals and fuels

For many years, capturing, storing or sequestering CO₂ from concentrated emission sources or from air has been a powerful technique for reducing atmospheric CO₂. Moreover, the use of CO₂ as a C1 building block to mitigate CO₂ emissions and, at the same time, produce sustainable chemicals or fuels is a challenging and promising alternative to meet global demand for chemicals and energy. Hence, the chemical incorporation and conversion of CO₂ into valuable chemicals has received much attention in the last decade, since CO₂ is an abundant, inexpensive, nontoxic, nonflammable, and renewable one-carbon building block. Nevertheless, CO₂ is the most oxidized form of carbon, thermodynamically the most stable form and kinetically inert. Consequently, the chemical conversion of CO₂ requires highly reactive, rich-energy substrates, highly stable products to be formed or harder reaction conditions. The use of catalysts constitutes an important tool in the development of sustainable chemistry, since catalysts increase the rate of the reaction without modifying the overall standard Gibbs energy in the reaction. Therefore, special attention has been paid to catalysis, and in particular to heterogeneous catalysis because of its environmentally friendly and recyclable nature attributed to simple separation and recovery, as well as its applicability to continuous reactor operations. Focusing on heterogeneous catalysts, we decided to center on zeolite and ordered mesoporous materials due to their high thermal and chemical stability and versatility, which make them good candidates for the design and development of catalysts for CO₂ conversion. In the present review, we analyze the state of the art in the last 25 years and the potential opportunities for using zeolite and OMS (ordered mesoporous silica) based materials to convert CO₂ into valuable chemicals essential for our daily lives and fuels, and to pave the way towards reducing carbon footprint. In this review, we have compiled, to the best of our knowledge, the different reactions involving catalysts based on zeolites and OMS to convert CO₂ into cyclic and dialkyl carbonates, acyclic carbamates, 2-oxazolidones, carboxylic acids, methanol, dimethylether, methane, higher alcohols (C₂₊OH), C₂₊ (gasoline, olefins and aromatics), syngas (RWGS, dry reforming of methane and alcohols), olefins (oxidative dehydrogenation of alkanes) and simple fuels by photoreduction. The use of advanced zeolite and OMS-based materials, and the development of new processes and technologies should provide a new impulse to boost the conversion of CO₂ into chemicals and fuels.

Advancements in Basic Zeolites for Biodiesel Production via Transesterification

The excessive utilization of petroleum diesel has led to the depletion of fossil resources and severe environmental pollution. Biodiesel produced from renewable triglycerides (TGs) or waste lipids is a low-emission fuel substitute for diesel. Biodiesel is mainly produced by transesterification reactions over homogeneous base catalysts with excellent activity and low cost. In comparison, solid base catalysts are more attractive due to their lower environmental impact and simpler production and purification processes. It remains a challenge to further improve the stability and activity of solid base catalysts. Because of the high surface area, superior stability, and tunable basicity, basic zeolites, especially two-dimensional zeolites, have emerged as promising solid basic catalysts for the transesterification of TGs. In this review, we present recent advancements in the synthesis, characterization, and catalytic performance of basic zeolites for the transesterification of TGs. Challenges and development prospects of basic zeolites for biodiesel production via transesterification are also pointed out. We expect that this review will inspire the more efficient and rational design of zeolites for sustainable fuel production.

Co-hydrolysis and Seed-Induced Synthesis of Basic Mesoporous ZSM-5 Zeolites with Enhanced Catalytic Performance

For zeolite catalysts, the regulation of active site and pore structure plays an important role in the enhancement of their catalytic performance. In this work, a one-pot and organic template-free co-regulation route is proposed to straightforwardly synthesize basic mesoporous ZSM-5 zeolites with adjustable alkaline-earth metal species. The synthesis pathway combines two decisive strategies: 1) the seed-induced interface assembly growth method and 2) the acidic co-hydrolysis/condensation of aluminosilicate species and alkaline-earth metal (e.g., Mg, Ca, Sr, or Ba) sources. It is interesting that the mesoporous structure was self-evolved through particle-attached seed-interfacial crystallization without the assistance of any template. Meanwhile, the incorporation of alkaline-earth metals species is homogeneous and highly dispersed in the solid products during the whole crystallization process, and finally generate the superior basicity. Catalysis tests of the as-synthesized samples displayed their novel performance in the typical base reaction of Knoevenagel condensation, even for bulky substrates owing to the enhanced diffusion arising from the meso/microporous network. This finding opens new possibilities for facile, cost-effective, and environmentally friendly synthesis of mesoporous high-silica zeolites with tunable acid/base properties, and deepens our understanding of the particle-attached crystallization.

Promotion effect of Mg on a post-synthesized Sn-Beta zeolite for the conversion of glucose to methyl lactate

Mg-Sn-Beta zeolites with different Mg/Sn molar ratios were prepared from the parent deAl-Beta by a coimpregnation method. It shows higher selectivity for the conversion of glucose to methyl lactate than post-synthesized Sn-Beta.

Straightforward synthesis of MTW-type magnesium silicalite for CO2 fixation with epoxides under mild conditions

Mg-Si-ZSM-12 was hydrothermally synthesized and effective for CO₂ fixation under mild conditions.

Combined solid-state NMR, FT-IR and computational studies on layered and porous materials

Understanding the structure-property relationship of solids is of utmost relevance for efficient chemical processes and technological applications in industries. This contribution reviews the concept of coupling three well-known characterization techniques (solid-state NMR, FT-IR and computational methods) for the study of solid state materials which possess 2D and 3D architectures and discusses the way it will benefit the scientific communities. It highlights the most fundamental and applied aspects of the proactive combined approach strategies to gather information at a molecular level. The integrated approach involving multiple spectroscopic and computational methods allows achieving an in-depth understanding of the surface, interfacial and confined space processes that are beneficial for the establishment of structure-property relationships. The role of ssNMR/FT-IR spectroscopic properties of probe molecules in monitoring the strength and distribution of catalytic active sites and their accessibility at the porous/layered surface is discussed. Both experimental and theoretical aspects will be considered by reporting relevant examples. This review also identifies and discusses the progress, challenges and future prospects in the field of synthesis and applications of layered and porous solids.

Metal-Organic Frameworks for Heterogeneous Basic Catalysis

Great attention has been given to metal-organic frameworks (MOFs)-derived solid bases because of their attractive structure and catalytic performance in various organic reactions. The extraordinary skeleton structure of MOFs provides many possibilities for incorporation of diverse basic functionalities, which is unachievable for conventional solid bases. The past decade has witnessed remarkable advances in this vibrant research area; however, MOFs for heterogeneous basic catalysis have never been reviewed until now. Therefore, a review summarizing MOFs-derived base catalysts is highly expected. In this review, we present an overview of the recent progress in MOFs-derived solid bases covering preparation, characterization, and catalytic applications. In the preparation section, the solid bases are divided into two categories, namely, MOFs with intrinsic basicity and MOFs with modified basicity. The basicity can originate from either metal sites or organic ligands. Different approaches used for generation of basic sites are included, and each approach is described with representative examples. The fundamental principles for the design and fabrication of MOFs with basic functionalities are featured. In the characterization section, experimental techniques and theoretical calculations employed for characterization of basic MOFs are summarized. Some representive experimental techniques, such as temperature-programmed desorption of CO₂ (CO₂-TPD) and infrared (IR) spectra of different probing molecules, are covered. Following preparation and characterization, the catalytic applications of MOFs-derived solid bases are dealt with. These solid bases have potential to catalyze some well-known "base-catalyzed reactions" like Knoevenagel condensation, aldol condensation, and Michael addition. Meanwhile, in contrast to conventional solid bases, MOFs show some different catalytic properties due to their special structural and surface properties. Remarkably, characteristic features of MOFs-derived solid bases are described by comparing with conventional inorganic counterparts, keeping in mind the current opportunities and challenges in this field.

Direct synthesis of V-containing all-silica beta-zeolite for efficient one-pot, one-step conversion of carbohydrates into 2,5-diformylfuran

V-containing all silica beta-zeolite exhibited high atom-efficiency in the direct synthesis of 2,5-diformylfuran from carbohydrates.

Improvement of the selectivity to aniline in benzene amination over Cu/TS-1 by potassium

Two different methods of introducing potassium into Cu/TS-1 were conducted and the catalysts obtained showed a rather different catalytic activity in the ammoxidation of benzene to aniline.

One-Pot Template-Free Synthesis of Cu-MOR Zeolite toward Efficient Catalyst Support for Aerobic Oxidation of 5-Hydroxymethylfurfural under Ambient Pressure

Supported catalysts are widely studied, and exploring new promising supports is significant to access more applications. In this work, novel copper-containing MOR-type zeolites Cu-MOR were synthesized in a one-pot template-free route and served as efficient supports for vanadium oxide. In the heterogeneous oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-diformylfuran (DFF) with molecular oxygen (O2) under ambient pressure, the obtained catalyst demonstrated high yield (91.5%) and good reusability. Even under the ambient air pressure, it gave a DFF yield of 72.1%. Structure-activity relationship analysis indicated that the strong interaction between the framework Cu species and the guest V sites accounted for the remarkable performance. This work reveals that the Cu-MOR zeolite uniquely acts as the robust support toward well-performed non-noble metal heterogeneous catalyst for biomass conversion.

ZSM-5 with controllable acidity as an efficient catalyst for a highly adjustable propene/ethene ratio in the 1-butene cracking

A facile strategy was proposed for the control of zeolitic acidity by selective cracking of a silane with an acid site.

Potential and challenges of zeolite chemistry in the catalytic conversion of biomass

This review emphasizes the progress, potential and future challenges in zeolite catalysed biomass conversions and relates these to concepts established in existing petrochemical processes.

A low-deactivation-rate Lewis acid zeolite prepared in an alkali metal ion-containing system for alkene epoxidation

The best catalytic performance among the currently reported TS-1 Lewis acid zeolites is achieved due to its durable catalytic life.