Synthesizing Ag Nanoparticles of Small Size on a Hierarchical Porosity Support for the Carboxylative Cyclization of Propargyl Alcohols with CO 2 under Ambient Conditions

In Situ Anchoring of Small-Sized Silver Nanoparticles on Porphyrinic Triazine-Based Frameworks for the Conversion of CO2 into α-Alkylidene Cyclic Carbonates with Outstanding Catalytic Activities under Ambient Conditions

The preparation of catalytic hybrid materials by introducing highly dispersed metallic nanoparticles into porous organic polymers (POPs) may be an ideal and promising strategy for integrated CO2 capture and conversion. In terms of the carboxylative cyclization of propargyl alcohols with CO2, the anchoring of silver nanoparticles (AgNPs) on functional POPs to fabricate efficient heterogeneous catalysts is considered to be quite intriguing but remains challenging. In the contribution, well-dispersed AgNPs were successfully anchored onto the porphyrinic triazine-based frameworks by a simple "liquid impregnation and in situ reduction" strategy. The presence of N-rich dual active sites, porphyrin and triazine, which acted as the electron donor and acceptor, respectively, offered a huge opportunity for the nucleation and growth of metal nanoparticles. Significantly, the as-prepared catalyst Ag/TPP-CTF shows excellent catalytic activity (up to 99%) toward the carboxylative cyclization of propargyl alcohols with CO2 at room temperature, achieving record-breaking activities (TOF up to 615 h-1 at 1 bar and 3077 h-1 at 10 bar). Moreover, the catalyst can be easily recovered and reused at least 10 times with retention of high catalytic activity. The possible mechanism involves small-sized AgNP-mediated alkyne activation, which may promote highly efficient and green conversion of CO2. This work paves the way for immobilizing metal nanoparticles onto functional POPs by surface structure changes for enhanced CO2 catalysis.

Exovinylene Cyclic Carbonates: Multifaceted CO2 -Based Building Blocks for Modern Chemistry and Polymer Science

Carbon dioxide is a renewable, inexhaustible, and cheap alternative to fossil resources for the production of fine chemicals and plastics. It can notably be converted into exovinylene cyclic carbonates, unique synthons gaining momentum for the preparation of an impressive range of important organic molecules and functional polymers, in reactions proceeding with 100 % atom economy under mild operating conditions in most cases. This Review summarizes the recent advances in their synthesis with particular attention on describing the catalysts needed for their preparation and discussing the unique reactivity of these CO₂ -based heterocycles for the construction of diverse organic building blocks and (functional) polymers. We also discuss the challenges and the future perspectives in the field.

En Route to CO2-Based (a)Cyclic Carbonates and Polycarbonates from Alcohols Substrates by Direct and Indirect Approaches

This review is dedicated to the state-of-the art routes used for the synthesis of CO2-based (a)cyclic carbonates and polycarbonates from alcohol substrates, with an emphasis on their respective main advantages and limitations. The first section reviews the synthesis of organic carbonates such as dialkyl carbonates or cyclic carbonates from the carbonation of alcohols. Many different synthetic strategies have been reported (dehydrative condensation, the alkylation route, the “leaving group” strategy, the carbodiimide route, the protected alcohols route, etc.) with various substrates (mono-alcohols, diols, allyl alcohols, halohydrins, propargylic alcohols, etc.). The second section reviews the formation of polycarbonates via the direct copolymerization of CO2 with diols, as well as the ring-opening polymerization route. Finally, polycondensation processes involving CO2-based dimethyl and diphenyl carbonates with aliphatic and aromatic diols are described.

Tandem Reactions Based on the Cyclization of Carbon Dioxide and Propargylic Alcohols: Derivative Applications of α-Alkylidene Carbonates

As a well-known greenhouse gas, carbon dioxide (CO2) has attracted increasing levels of attention in areas of energy, environment, climate, etc. Notably, CO2 is an abundant, nonflammable, and renewable C1 feedstock in view of chemistry. Therefore, the transformation of CO2 into organic compounds is an extremely attractive research topic in modern green and sustainable chemistry. Among the numerous CO2 utilization methods, carboxylative cycloaddition of CO2 into propargylic alcohols is an ideal route due to the corresponding products, α-alkylidene cyclic carbonates, which are a series of highly functionalized compounds that supply numerous potential methods for the construction of various synthetically and biologically valuable agents. This cyclization reaction has been intensively studied and systematically summarized, in the past years. Therefore, attention has been gradually transferred to produce more derivative compounds. Herein, the tandem reactions of this cyclization with hydration, amination, alcoholysis, and isomerization to synthesize α-hydroxyl ketones, oxazolidinones, carbamates, unsymmetrical carbonates, tetronic acids, ethylene carbonates, etc. were systematically reviewed.

A heterogeneous bifunctional silica-supported Ag2O/Im+Cl− catalyst for efficient CO2 conversion

Reusable heterogeneous bifunctional silica-supported Ag2O/Im+Cl− catalyst in carboxylative cyclization reaction of propargyl alcohols by the efficient utilization of CO2 under ambient conditions.

Expanded Ring NHC Silver Carboxylate Complexes as Efficient and Reusable Catalysts for the Carboxylative Cyclization of Unsubstituted Propargylic Derivatives

Stabilized by a bulky N-heterocyclic carbene [^BP DPr, 1,3-bis(2,6-diisopropylphenyl)-1,3-diazonine-2-ylidene] ligand, new silver carboxylate complexes of the form ^BP DPrAgO₂ C-R (R=Me, Ph) have been synthesized and fully characterized in solution and in the solid state and implemented as sole catalysts (base-, additive-, and, in some cases, solvent-free) in the challenging fixation of carbon dioxide to unsubstituted propargylic derivatives for the synthesis of oxazolidinones and α-methylene cyclic carbonates. Derived from X-ray diffraction studies, the molecular geometry and the concept of buried volume were employed to describe the structural and steric features of these silver complexes. Their stability and efficiency as catalysts have been demonstrated by the synthesis of 29 carboxylation products (72-98 % yield) at low catalyst loadings (0.01-1.5 mol%). Characteristics are high turnover numbers (up to 9400), catalyst recyclability (up to 96 % yield after the 7th cycle with no decomposition of the silver complex), and the possibility to scale-up the reaction.

Room-Temperature Synthesis of a Hollow Microporous Organic Polymer Bearing Activated Alkyne IR Probes for Nonradical Thiol-yne Click-Based Post-Functionalization

This work shows that hollow microporous organic polymer (H-MOP-A) with activated internal alkynes as IR probes can be prepared by template synthesis based on acyl Sonogashira-Hagihara coupling at room temperature. The H-MOP-A is a versatile platform in the main chain PSM based on nonradical thiol-yne click reaction. Moreover, an IR peak of internal alkynes in the H-MOP-A is very intense and could be utilized in the monitoring of thiol-yne click-based main chain PSM. The functionalized H-MOP-A with carboxylic acids (H-MOP-CA) showed efficient adsorption toward Ag⁺ ions. The resultant H-MOP-CA-Ag showed excellent performance in the CO₂ fixation to α-alkylidene cyclic compounds.

Synthesis of α-alkylidene cyclic carbonates via CO2 fixation under ambient conditions promoted by an easily available silver carbamate

A series of α-alkylidene cyclic carbonates has been synthesized under mild conditions using silver carbamate Ag(O₂CNEt₂) in combination with PPh₃.

Preparation and Electrocatalysis Application of Pure Metallic Aerogel: A Review

Nanomaterials are widely used in electrocatalysts due to their quantum size effect and high utilization efficiency. There are two ways to improve the activity of nanoelectrocatalysts: increasing the number of active sites and improving the inherent activity of each catalytic site. The structure of the catalyst itself can be improved by increasing the number of exposed active sites per unit mass. The high porosity and three-dimensional network structure enable aerogels to have the characteristics of a large specific surface area, exposing many active sites and bringing structural stability through the self-supporting nature of aerogels. Thus, by adjusting the compositions of aerogels, the synergetic effect introduced by alloy elements can be utilized to further improve the single-site activity. In this review, we summarized the basic preparation strategy of aerogels and extended it to the preparation of alloys and special structure aerogels. Moreover, through the eight electrocatalysis cases, the outstanding catalytic performances and broad applicability of aerogel electrocatalysts are emphasized. Finally, we predict the future development of pure metallic aerogel electrocatalysts from the perspective of preparation to application.

Observation of Substituent Effects in the Electrochemical Adsorption and Hydrogenation of Alkynes on Pt{hkl} Using SHINERS

By combining cyclic voltammetry (CV) and shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS), the adsorption behavior of two alkynes, propargyl alcohol (PA) and 2-methyl-3-butyn-2-ol (MeByOH), undergoing hydrogenation on Pt basal plane single-crystal electrodes is investigated. It is found that PA and MeByOH give rise to strong surface sensitivities in relation to both hydrogenation activity and molecular fragmentation into adsorbed species such as CO. For PA, irreversible adsorption is strongly favored for Pt{100} and Pt{110} but is weak in the case of Pt{111}. It is suggested that the presence of the primary alcohol substituent is key to this behavior, with the order of surface reactivity being Pt{100} > Pt{110} > Pt{111}. In contrast, for MeByOH, strong irreversible adsorption is observed on all three basal plane Pt surfaces and we propose that this reflects the enhanced activity of the alkyne moiety arising from the inductive effect of the two methyl groups, coupled with the decreased activity of the tertiary alcohol substituent toward fragmentation. Pt{111} also exhibits singular behavior in relation to MeByOH hydrogenation in that a sharp Raman band at 1590 cm^-1 is observed corresponding to the formation of a di-σ/π-bonded surface complex as the alkyne adsorbs. This band frequency is some 20 cm^-1 higher than the analogous broadband observed for PA and MeByOH adsorbed on all other basal plane Pt surfaces and may be viewed as a fingerprint of Pt{111} terraces being present at a catalyst surface undergoing hydrogenation. Insights into the hydrogenation activity of different Pt{hkl} surfaces are obtained using quantitative comparisons between Raman bands at hydrogenation potentials and at 0.4 V vs Pd/H, the beginning of the double-layer potential region, and it is asserted (with support from CV) that Pt{110} is the most active plane for hydrogenation due to the presence of surface defects generated via the lifting of the (1 × 2) to (1 × 1) clean surface reconstruction following flame annealing and hydrogen cooling. Our findings are also consistent with the hypothesis that Pt{111} planes are most likely to provide semihydrogenation selectivity of alkynes to alkenes, as reported previously.

Formation of CX Bonds in CO2 Chemical Fixation Catalyzed by Metal-Organic Frameworks

Transformation of CO₂ based on metal-organic framework (MOF) catalysts is becoming a hot research topic, not only because it will help to reduce greenhouse gas emission, but also because it will allow for the production of valuable chemicals. In addition, a large number of impressive products have been synthesized by utilizing CO₂ . In fact, it is the formation of new covalent bonds between CO₂ and substrate molecules that successfully result in CO₂ solidly inserting into the products, and only four types of new CX bonds, including CH, CC, CN, and CO bonds, are observed in this exploration. An overview of recent progress in constructing CX bonds for CO₂ conversion catalyzed by various MOF catalysts is provided. The catalytic mechanism of generating different CX bonds is further discussed according to both structural features of MOFs and the interactions among CO₂ , substrates, as well as MOFs. The future opportunities and challenges in this field are also tentatively covered.

A rose bengal-functionalized porous organic polymer for carboxylative cyclization of propargyl alcohols with CO2

Rose bengal-functionalized polymer (RB-POP) supported Ag nanoparticles exhibited excellent performance for catalysing carboxylative cyclization of propargyl alcohols with CO₂.

Copper(i) iodide cluster-based lanthanide organic frameworks: synthesis and application as efficient catalysts for carboxylative cyclization of propargyl alcohols with CO2 under mild conditions

Two non-noble metal based metal–organic frameworks display different catalytic activities in the carboxylative cyclization of propargyl alcohols with CO₂ under atmospheric pressure and room temperature.

Synthesis of tetronic acids from propargylic alcohols and CO2

A direct and practical synthesis of important tetronic acids from easily available propargylic alcohols and carbon dioxide is reported for the first time. This transition-metal-free transformation features high atom- and step-economy, mild reaction conditions, good functional group tolerance and high yield. Preliminary mechanistic studies suggest that the reaction proceeds via cyclization to give alkylidene cyclic carbonate, ring-opening and re-cyclization processes.

Reactions of secondary propargylamines with heteroallenes for the synthesis of diverse heterocycles

This focused review aims to summarize recent developments in the processes involving additions of secondary propargylamines to various heteroallenes and subsequent transition metal-catalyzed or electrophile-mediated cyclizations.

N,N-Dimethylation of nitrobenzenes with CO2 and water by electrocatalysis

We have proposed a strategy for the synthesis of N,N-dimethylanilines from nitrobenzene and its derivatives, CO2, and water via an electrochemical reaction under ambient conditions. H+ generated from H2O was used as the hydrogen source. Pd/Co-N/carbon, in which the Pd nanoparticles were supported on Co-N/carbon, was designed and used as the electrocatalyst. It was found that the electrocatalyst was very efficient for the reaction in MeCN solution with 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([Bmim]Tf2N) as the supporting electrolyte and 1-amino-methylphosphonic acid (AMPA) as the thermal co-catalyst. A series of control experiments showed that Pd/Co-N/carbon and AMPA cooperated very well in accelerating the reaction. This synthetic route has some obvious advantages, such as using CO2 and water as the reactants, ambient reaction conditions, and high yields of the desired products. This opens up a way to synthesize chemicals by the combination of an electrocatalyst and a thermal catalyst with organic compounds, CO2, and water as the reactants.

Synthesis of Carbonates from Alcohols and CO2

Alcohols are ubiquitous compounds in nature that offer modular building blocks for synthetic chemistry. Here we discuss the most recent development of different classes of alcohols and their coupling chemistry with carbon dioxide as to afford linear and cyclic carbonates, the challenges associated with their formation, and the potential of this chemistry to revive a waste carbon feed stock.

A simple and robust AgI/KOAc catalytic system for the carboxylative assembly of propargyl alcohols and carbon dioxide at atmospheric pressure

A simple, robust and economical AgI/KOAc system was developed for the carboxylative assembly of propargyl alcohols and CO₂ under mild conditions applying an unprecedentedly low level of 0.05 mol% Ag loading.

Bromide promoted hydrogenation of CO2 to higher alcohols using Ru-Co homogeneous catalyst

Iodides are commonly used promoters in C2+OH synthesis from CO2/CO hydrogenation. Here we report the highly efficient synthesis of C2+OH from CO2 hydrogenation over a Ru3(CO)12-Co4(CO)12 bimetallic catalyst with bis(triphenylphosphoranylidene)ammonium chloride (PPNCl) as the cocatalyst and LiBr as the promoter. Methanol, ethanol, propanol and isobutanol were formed at milder conditions. The catalytic system had a much better overall performance than those of reported iodide promoted systems because PPNCl and LiBr cooperated very well in accelerating the reaction. LiBr enhanced the activity and PPNCl improved the selectivity, and thus both the activity and selectivity were very high when both of them were used simultaneously. In addition, the catalyst could be reused for at least five cycles without an obvious change of catalytic performance.

Synthesis of acetic acid via methanol hydrocarboxylation with CO2 and H2

Acetic acid is an important bulk chemical that is currently produced via methanol carbonylation using fossil based CO. Synthesis of acetic acid from the renewable and cheap CO₂ is of great importance, but state of the art routes encounter difficulties, especially in reaction selectivity and activity. Here we report a route to produce acetic acid from CO₂, methanol and H₂. The reaction can be efficiently catalysed by Ru–Rh bimetallic catalyst using imidazole as the ligand and LiI as the promoter in 1,3-dimethyl-2-imidazolidinone (DMI) solvent. It is confirmed that methanol is hydrocarboxylated into acetic acid by CO₂ and H₂, which accounts for the outstanding reaction results. The reaction mechanism is proposed based on the control experiments. The strategy opens a new way for acetic acid production and CO₂ transformation, and represents a significant progress in synthetic chemistry.

Industrial routes to acetic acid use carbon monoxide for the carbonylation of methanol. Here, the authors report a hydrocarboxylation method that instead uses carbon dioxide and hydrogen for the conversion of methanol into acetic acid.

AgX@carbon (X = Br and I) as robust and efficient catalysts for the reaction of propargylic alcohols and CO2 to carbonates under ambient conditions

An easily prepared AgX@C material was found to be a highly efficient catalyst for transforming CO₂ into carbonates.

Silver-catalyzed carboxylation

The recent studies of the silver-catalyzed carboxylation reactions using carbon dioxide are described.