Titanium Dioxide-Grafted Copper Complexes: High-Performance Electrocatalysts for the Oxygen Reduction Reaction in Alkaline Media

Bioinspired molecular catalysts with a unique tricopper architecture for highly efficient oxygen reduction reaction

In situ growth of intertwined trinuclear copper complexes (nCu3) on a cellulose-derived carbon support (CMC) produced a high-performance electrocatalyst (CMC-nCu3) for the oxygen reduction reaction (ORR), which demonstrated superior performance in zinc-air batteries compared to a commercial Pt/C catalyst. This work highlights the importance of copper-based molecular catalysts with rich and intertwined tricopper structures for boosting both ORR activity and stability.

Enhancing oxygen reduction activity of dinuclear copper complexes loaded on an N-doped carbon support via a low-temperature pyrolysis strategy

Bioinspired by the active sites of multicopper oxidases (MCOs), bi/multinuclear copper complexes have attracted great attention in promoting catalytic activity for the oxygen reduction reaction (ORR). Herein, we report the preparation of a Cu-N-C electrocatalyst Cu-BPOZ@CNB-400 for efficient ORR, which was obtained by low temperature pyrolysis of a dinuclear 2,5-bis(2-pyridyl)-1,3,4-oxadiazole (BPOZ) copper complex loaded on a N-doped carbon support at 400 °C. Cu-BPOZ@CNB-400 exhibited a half-wave potential (E1/2) of 0.86 V vs. RHE for the ORR in 0.1 M KOH solution, which was significantly higher than that of the Cu-BPOZ@CNB-800 (E1/2 = 0.83 V) catalyst treated under high temperature (at 800 °C) and the control catalyst Cu-Phen@CNB-400 (E1/2 = 0.82 V) derived from low-temperature-treatment (at 400 °C) of a mononuclear phenanthroline-coordinated-Cu complex loaded on a N-doped carbon support. When Cu-BPOZ@CNB-400 was applied as the cathode catalyst in zinc-air batteries a maximum power density (Pmax) of 127 mW cm-2 could be achieved, demonstrating comparable catalyst performance to the commercial 20 wt% Pt/C (Pmax = 122 mW cm-2) and the control Cu-Phen@CNB-400 catalyst (Pmax = 105 mW cm-2) under similar experimental conditions. Low-temperature pyrolysis of dinuclear copper complexes on a carbon support improved the charge transfer efficiency, inhibited metal aggregation, and could produce highly dispersed Cu-N-C catalysts with dinuclear copper sites for promoting the 4e--reduction selectivity of the ORR. It thus provides a cost-effective approach for the controllable fabrication of efficient ORR catalysts to be applied for energy conversion devices.

Amorphous dominated metal hydroxide-organic framework with compositional and structural heterogeneity for enhancing anodic electro-oxidation reactions

Inorganic-organic hybrids are promising anode catalysts to realize high activity and stability. Herein, an amorphous-dominated transition metal hydroxide-organic framework (MHOF) with isostructural mixed-linker was successfully synthesized on nickel foam (NF) substrate. The designed IML₂₄-MHOF/NF exhibited remarkable electrocatalytic activity with an ultralow overpotential of 271 mV for oxygen evolution reaction (OER) and a potential of 1.29 V vs. reversible hydrogen electrode for urea oxidation reaction (UOR) at 10 mA·cm^-2. Furthermore, the IML₂₄-MHOF/NF||Pt-C cell required only 1.31 V for urea electrolysis at 10 mA·cm^-2, which was much smaller than traditional water splitting (1.50 V). When coupled with UOR, the hydrogen yield rate was faster (1.04 mmol·h^-1) than with OER (0.32 mmol·h^-1) at 1.6 V. The structure characterizations, together with operando monitoring, including operando Raman, Fourier transform infrared, electrochemical impedance spectroscopy, and alcohol molecules probe, revealed that: (1) amorphous IML₂₄-MHOF/NF prefers self-adaptive reconstruction into active intermediate species against the external stimulus; (2) pyridine-3,5-dicarboxylate-incorporation into parent framework reconfigures electronic structure of system, thus mediating the absorption of oxygen-containing reactants during anodic oxidation reactions, such as O* and COO*. This work provides a new approach for boosting the catalytic activity of anodic electro-oxidation reactions by trimming the structure of MHOF-based catalysts.

Axial Ligand Coordination Tuning of the Electrocatalytic Activity of Iron Porphyrin Electrografted onto Carbon Nanotubes for the Oxygen Reduction Reaction

The oxygen reduction reaction (ORR) is essential in many life processes and energy conversion systems. It is desirable to design transition metal molecular catalysts inspired by enzymatic oxygen activation/reduction processes as an alternative to noble-metal-Pt-based ORR electrocatalysts, especially in view point of fuel cell commercialization. We have fabricated bio-inspired molecular catalysts electrografted onto multiwalled carbon nanotubes (MWCNTs) in which 5,10,15,20-tetra(pentafluorophenyl) iron porphyrin (iron porphyrin FeF₂₀ TPP) is coordinated with covalently electrografted axial ligands varying from thiophene to imidazole on the MWCNTs' surface. The catalysts' electrocatalytic activity varied with the axial coordination environment (i. e., S-thiophene, N-imidazole, and O-carboxylate); the imidazole-coordinated catalyst MWCNTs-Im-FeF₂₀ TPP exhibited the highest ORR activity among the prepared catalysts. When MWCNT-Im-FeF₂₀ TPP was loaded onto the cathode of a zinc-air battery, an open-cell voltage (OCV) of 1.35 V and a maximum power density (P_max ) of 110 mW cm^-2 were achieved; this was higher than those of MWCNTs-Thi-FeF₂₀ TPP (OCV=1.30 V, P_max =100 mW cm^-2 ) and MWCNTs-Ox-FeF₂₀ TPP (OCV=1.28 V, P_max =86 mW cm^-2 ) and comparable with a commercial Pt/C catalyst (OCV=1.45 V, P_max =120 mW cm^-2 ) under similar experimental conditions. This study provides a time-saving method to prepare covalently immobilized molecular electrocatalysts on carbon-based materials with structure-performance correlation that is also applicable to the design of other electrografted catalysts for energy conversion.

Electro- and photoelectro-catalysts derived from bimetallic amorphous metal–organic frameworks

It is developed a synthesis method for the design of new bimetallic amorphous MOFs. Such frameworks serve as precursors to prepare high-performance electro- and photoelectro-catalysts for ORR, OER and HER in both acidic and alkaline media.

Sodalite-type Cu-based Three-dimensional Metal-Organic Framework for Efficient Oxygen Reduction Reaction

Inspired by copper-based oxygen reduction biocatalysts, we have studied the electrocatalytic behavior of a Cu-based MOF (Cu-BTT) for oxygen reduction reaction (ORR) in alkaline medium. This catalyst reduces the oxygen at the onset (E_onset ) and half-wave potential (E^1/2 ) of 0. 940 V and 0.778 V, respectively. The high halfway potential supports the good activity of Cu-BTT MOF. The high ORR catalytic activity can be interpreted by the presence of nitrogen-rich ligand (tetrazole) and the generation of nascent copper(I) during the reaction. In addition to the excellent activity, Cu-BTT MOF showed exceptional stability too, which was confirmed through chronoamperometry study, where current was unchanged up to 12 h. Further, the 4-electrons transfer of ORR kinetics was confirmed by hydrodynamic voltammetry. The oxygen active center namely copper(I) generation during ORR has been understood by the reduction peak in cyclic voltammetry as well in the XPS analysis.

Comparison of new metal organic framework-based catalysts for oxygen reduction reaction

In this article, we collected the most significant and recent data in brief in the field of metal organic frameworks oxygen reduction reaction catalysts, obtained from some of the most recent research papers in the field. We present lists of materials and their key parameters that are relevant to the cathode catalysts in polymer electrolyte membrane fuel cells. All the materials listed in this paper are composed of metal organic frameworks, zeolitic imidazolate frameworks, or their derivatives. These are divided into two main groups: pristine MOFs and MOF-derived materials. The data in this article is a summary of more extensive review (Gonen and Elbaz, 2018) [1].

Control of the Interfacial Wettability to Synthesize Highly Dispersed PtPd Nanocrystals for Efficient Oxygen Reduction Reaction

Highly dispersed PtPd bimetallic nanocrystals with enhanced catalytic activity and stability were prepared by adjusting the interfacial wettability of the reaction solution on a commercial carbon support. This approach holds great promise for the development of high-performance and low-cost catalysts for practical applications.

High Oxygen Reduction Reaction Performances of Cathode Materials Combining Polyoxometalates, Coordination Complexes, and Carboneous Supports

A series of carbonaceous-supported precious-metal-free polyoxometalate (POM)-based composites which can be easily synthesized on a large scale was shown to act as efficient cathode materials for the oxygen reduction reaction (ORR) in neutral or basic media via a four-electron mechanism with high durability. Moreover, exploiting the versatility of the considered system, its activity was optimized by the judicious choice of the 3d metals incorporated in the {(PW₉)₂M₇} (M = Co, Ni) POM core, the POM counterions and the support (thermalized triazine-based frameworks (TTFs), fluorine-doped TTF (TTF-F), reduced graphene oxide, or carbon Vulcan XC-72. In particular, for {(PW₉)₂Ni₇}/{Cu(ethylenediamine)₂}/TTF-F, the overpotential required to drive the ORR compared well with those of Pt/C. This outstanding ORR electrocatalytic activity is linked with two synergistic effects due to the binary combination of the Cu and Ni centers and the strong interaction between the POM molecules and the porous and highly conducting TTF-F framework. To our knowledge, {(PW₉)₂Ni₇}/{Cu(ethylenediamine)₂}/TTF-F represents the first example of POM-based noble-metal-free ORR electrocatalyst possessing both comparable ORR electrocatalytic activity and much higher stability than that of Pt/C in neutral medium.

Efficient electrocatalytic O2 reduction at copper complexes grafted onto polyvinylimidazole coated carbon nanotubes

Copper complexes of 5-nitrophenanthroline were sandwiched between polyvinylimidazole layers wrapped on carbon nanotubes, which showed ORR activity comparable to a Pt/C catalyst in alkaline media.

A reduced graphene oxide/covalent cobalt porphyrin framework for efficient oxygen reduction reaction

A series of pyridine-functionalized reduced graphene oxide (G-dye)/cobalt–porphyrin covalent organic framework (CoCOF) hybrids have been synthesized and assayed as efficient electrocatalysts toward oxygen reduction reaction.

Space-confined synthesis of multilayer Cu–N-doped graphene nanosheets for efficient oxygen electroreduction

Cu–N-doped graphene nanosheets prepared by thermal conversion of montmorillonite-confined Cu(ii) 2,2′-bipyridines exhibit efficient catalytic performance for oxygen electroreduction.

A cobalt coordination compound with indole acetic acid for fabrication of a high performance cathode catalyst in fuel cells

Construction of coupling site with electrophilic and nucleophilic centers is the key to enhance ORR in acidic electrolyte.