Dual Nickel Photocatalysis for O-Aryl Carbamate Synthesis from Carbon Dioxide

We report the use of dual nickel photocatalysis in the synthesis of O-aryl carbamates from aryl iodides or bromides, amines, and carbon dioxide. The reaction proceeded in visible light, at ambient carbon dioxide pressure, and without stoichiometric activating reagents. Mechanistic analysis is consistent with a Ni(I-III) cycle, where the active species is generated by the photocatalyst. The rate-limiting steps were the photocatalyst-mediated reduction of Ni(II) to Ni(I) and subsequent oxidative addition of the aryl halide. The physical properties of the photocatalyst were critical for promoting formation of O-aryl carbamates over various byproducts. Nine new phthalonitrile photocatalysts were synthesized, which exhibited properties that were vital to achieve high selectivity and activity.

Photoredox-catalyzed coupling of aryl sulfonium salts with CO2 and amines to access O-aryl carbamates

An efficient photoredox-catalyzed three-component coupling reaction of aryl sulfonium salts, carbon dioxide and amines has been developed for the first time. This reaction provides a new strategy for the synthesis of a range of valuable O-aryl carbamates from readily available arenes via a site-selective thianthrenation/carbamoyloxylation two-step process. Mild conditions, broad substrate scope and good functional group tolerance are the features of the transformation. The synthetic utility of the method was demonstrated by the late-stage modification of bioactive molecules and pharmaceuticals.

Transition Metal-Free Synthesis of Carbamates Using CO2 as the Carbon Source

Utilization of carbon dioxide as a C1 synthon is highly attractive for the synthesis of valuable chemicals. However, activation of CO₂ is highly challenging, owing to its thermodynamic stability and kinetic inertness. With this in mind, several strategies have been developed for the generation of carbon-heteroatom bonds. Among these, formation of C-N bonds is highly attractive, especially, when carbamates can be synthesized directly from CO₂ . This Minireview focuses on transition metal-free approaches for the fixation of CO₂ to generate carbamates for the production of fine chemicals and pharmaceuticals. Within the past decade, transition metal-free approaches have gained increasing attention, but traditional reviews have rarely focused on these approaches. Direct comparisons between such methods have been even more scarce. This Minireview seeks to address this discrepancy.

Heteroaryliodonium(III) Salts as Highly Reactive Electrophiles

In recent years, the chemistry of heteroaryliodonium(III) salts has undergone significant developments. Heteroaryliodonium(III) salts have been found to be useful synthetic tools for the transfer of heteroaryl groups under metal-catalyzed and metal-free conditions for the preparation of functionalized heteroarene-containing compounds. Synthetic transformations mediated by these heteroaryliodonium(III) salts are classified into two categories: (1) reactions utilizing the high reactivity of the hypervalent iodine(III) species, and (2) reactions based on unique and new reactivities not observed in other types of conventional diaryliodonium salts. The latter feature is of particular interest and so has been intensively investigated in recent decades. This mini-review therefore aims to summarize the recent synthetic applications of heteroaryliodonium(III) salts as highly reactive electrophiles.

Access to Biphenyls by Palladium-Catalyzed Oxidative Coupling of Phenyl Carbamates and Phenols

The oxidative cross-coupling of phenols (3 equiv) to various substituted phenyl N,N-diethylcarbamates was explored with a variety of substrates. Pd(OAc)2 was employed as the catalyst (20 mol%) and K2S2O8 as the stoichiometric oxidant in trifluoroacetic acid as the solvent (50 °C, 2 h). Carbamates without or with a substituent on the phenyl ring (Me, Ph, Cl, OMe) underwent the reaction unless the phenyl substituent was too strongly electron withdrawing (CN). Cross-coupling occurred exclusively in the ortho position relative to the carbamate group. The regioselectivity at the phenol (ortho or para to hydroxy) was mainly determined by steric factors. Yields up to 60–70% were achieved for specific carbamate/phenol combinations.

Catalytic Conversion of Carbon Dioxide through C-N Bond Formation

From the viewpoint of green chemistry and sustainable development, it is of great significance to synthesize chemicals from CO₂ as C₁ source through C-N bond formation. During the past several decade years, many studies on C-N bond formation reaction were involved, and many efforts have been made on the theory. Nevertheless, several great challenges such as thermodynamic limitation, low catalytic efficiency and selectivity, and high pressure etc. are still suffered. Herein, recent advances are highlighted on the development of catalytic methods for chemical fixation of CO₂ to various chemicals through C-N bond formation. Meanwhile, the catalytic systems (metal and metal-free catalysis), strategies and catalytic mechanism are summarized and discussed in detail. Besides, this review also covers some novel synthetic strategies to urethanes based on amines and CO₂. Finally, the regulatory strategies on functionalization of CO₂ for N-methylation/N-formylation of amines with phenylsilane and heterogeneous catalysis N-methylation of amines with CO₂ and H₂ are emphasized.

Carbon dioxide utilization in the efficient synthesis of carbamates by deep eutectic solvents (DES) as green and attractive solvent/catalyst systems

Deep eutectic solvents as a green solvent/catalyst system for directly synthesizing carbamates from amines, CO₂ and alkyl halides.

Direct bromocarboxylation of arynes using allyl bromides and carbon dioxide

An unprecedented multicomponent reaction involving arynes, allyl bromides, and CO₂ has been developed to construct various allyl o-bromobenzoate scaffolds.

Catalytic synthesis of benzimidazoles and organic carbamates using a polymer supported zinc catalyst through CO2 fixation

Zinc metal is attached to the organically modified polystyrene and the obtained catalyst is well characterized. The catalyst is very efficient for the formation of benzimidazoles and organic carbamates through carbon dioxide fixation.

Palladium-Catalyzed Four-Component Cascade Reaction for the Synthesis of Highly Functionalized Acyclic O,O-Acetals

A palladium-catalyzed four-component cascade reaction of carbon dioxide, amines, allenyl ethers, and aryl iodides has been developed for the first time. The novel reaction allows simultaneous construction of three different new bonds (C-N, C-O, and C-C) in a single step, affording an efficient method for the synthesis of a variety of highly functionalized acyclic O,O-acetals. Excellent chemo- and regioselectivity, wide substrate scope, and good functional group tolerance are features of the method.

A four-component coupling reaction of carbon dioxide, amines, cyclic ethers and 3-triflyloxybenzynes for the synthesis of functionalized carbamates

A novel four-component coupling reaction of carbon dioxide, amines, cyclic ethers and 3-triflyloxybenzynes for the synthesis of functionalized carbamates has been developed for the first time.

Aryl Transfer Selectivity in Metal-Free Reactions of Unsymmetrical Diaryliodonium Salts

Aromatic rings are found in a wide variety of products, including pharmaceuticals, agrochemicals, and functional materials. Diaryliodonium salts are new reagents used to transfer aryl groups under both metal-free and metal-catalyzed reactions and thereby synthesize arene-containing compounds. This minireview focuses on recent studies in selective aryl transfer reactions from unsymmetrical diaryliodonium salts under metal-free conditions. Reactions reported from 2007 to 2017, which represents a period of significant growth in diaryliodonium salt chemistry, are presented and organized by the type of reactive intermediate formed in the reaction. Specifically, reactions involving λ³ -iodane, λ³ -iodane radical anions, aryl radicals, and arynes are discussed. Chemoselectivity trends in aryl transfer are compared and contrasted across reaction intermediates and translation to potential auxiliaries are posited.

A Simple Zinc Catalyst for Carbamate Synthesis Directly from CO2

Several zinc salts were employed as catalysts for the synthesis of carbamates directly from aromatic amines, CO₂ , and silicate esters. Zn(OAc)₂ offered the best performance among the salts tested. The addition of an N-donor ligand such as 1,10-phenanthroline increased the yield. The best catalytic performance of Zn(OAc)₂ can be explained by carboxylate-assisted proton activation. The interaction between the substrate and the catalyst can be observed by chemical shifts in ¹ H and ¹⁵ N NMR spectra. Isocyanate was a key intermediate, which was generated from amine and CO₂ . Silicate ester was finally converted to siloxane, which was determined by ²⁹ Si NMR. The commercially available catalyst system could be reused. The yield of isolated carbamate could reach up to 96 % with various substrates, and the catalytic reaction was amine-selective in the presence of other functional groups.

The dearomative annulation between N-2-pyridylamidine and CO2 toward pyrido[1,2-a]-1,3,5-triazin-4-ones

A base-promoted dearomative annulation between N-2-pyridylamidine and an atmospheric pressure of CO₂ was developed, affording a series of pyrido[1,2-a]-1,3,5-triazin-4-ones in moderate to excellent yields.

nBu4NI-catalyzed oxidative cross-coupling of carbon dioxide, amines, and aryl ketones: access to O-β-oxoalkyl carbamates

The first nBu₄NI-catalyzed oxidative cross-coupling reaction of carbon dioxide, amines and arylketones leading to O-β-oxoalkyl carbamates is reported.

Chemoselective Synthesis of Carbamates using CO2 as Carbon Source

Synthesis of carbamates directly from amines using CO2 as the carbon source is a straightforward and sustainable approach. Herein, we describe a highly effective and chemoselective methodology for the synthesis of carbamates at room temperature and atmospheric pressure. This methodology can also be applied to protect the amino group in amino acids and peptides, and also to synthesize important pharmaceuticals.

Unsymmetrical Aryl(2,4,6-trimethoxyphenyl)iodonium Salts: One-Pot Synthesis, Scope, Stability, and Synthetic Studies

Diaryliodonium salts have recently attracted significant attention as metal-free-arylation reagents in organic synthesis, and efficient access to these salts is critical for advancement of their use in reaction discovery and development. The trimethoxybenzene-derived auxiliary is a promising component of unsymmetrical variants, yet access remains limited. Here, a one-pot synthesis of aryl(2,4,6-trimethoxyphenyl)iodonium salts from aryl iodides, m-CPBA, p-toluenesulfonic acid, and trimethoxybenzene is described. Optimization of the reaction conditions for this one-pot synthesis was enabled by the method of multivariate analysis. The reaction is fast (<1 h), provides a high yield of product (>85% average), and has broad substrate scope (>25 examples) including elaborate aryl iodides. The utility of these reagents is demonstrated in moderate to high yielding arylation reactions with C-, N-, O-, and S-nucleophiles including the synthesis of a liquid crystal molecule.

Heterobimetallic dinuclear lanthanide alkoxide complexes as acid–base bifunctional catalysts for synthesis of carbamates under solvent-free conditions

Heterobimetallic dinuclear lanthanide alkoxide complexes Ln₂Na₈(OCH₂CH₂NMe₂)₁₂(OH)₂ [Ln: I (Nd), II (Sm), III (Yb) and IV (Y)] were used as efficient acid–base bifunctional catalysts for the synthesis of carbamates and the N-Boc protection of amines.