Unusually Strong Long-Distance Metal-Metal Coupling in Bis(ferrocene)-Containing BOPHY: An Introduction to Organometallic BOPHYs

Design, Synthesis, and Characterization of Organometallic BODIPY-Ru(II) Dyads: Redox and Photophysical Properties with Singlet Oxygen Generation Capability†

A series of Ru(II)-acetylide complexes (Ru1, Ru2, and Ru1m) with alkynyl-functionalized borondipyrromethene (BODIPY) conjugates were designed by varying the position of the linker that connects the BODIPY unit to the Ru(II) metal center through acetylide linkage at either the 2-(Ru1) and 2,6-(Ru2) or the meso-phenyl (Ru1m) position of the BODIPY scaffold. The Ru(II) organometallic complexes were characterized by various spectroscopic methods, including nuclear magnetic resonance (NMR) spectroscopy, infrared (IR) spectroscopy, CHN, and high-resolution mass spectrometry (HRMS) analyses. The Ru(II)-BODIPY conjugates exhibit fascinating electrochemical and photophysical properties. All BODIPY-Ru(II) complexes exhibit strong absorption (εmax = 29,000-72,000 M-1 cm-1) in the visible region (λmax = 502-709 nm). Fluorescence is almost quenched for Ru1 and Ru2, whereas Ru1m shows the residual fluorescence of the corresponding BODIPY core at 517 nm. The application of the BODIPY-Ru(II) dyads as nonporphyrin-based triplet photosensitizers was explored by a method involving the singlet oxygen (1O2)-mediated photo-oxidation of diphenylisobenzofuran. Effective π-conjugation between the BODIPY chromophore and Ru(II) center in the case of Ru1 and Ru2 was found to be necessary to improve intersystem crossing (ISC) and hence the 1O2-sensitizing ability. In addition, electrochemical studies indicate electronic interplay between the metal center and the redox-active BODIPY in the BODIPY-Ru(II) dyads.

Colorimetric Cu2+ Detection of (1E,2E)-1,2-Bis((1H-pyrrol-2-yl)methylene)hydrazine Using a Custom-Built Colorimeter

The compound (1E,2E)-1,2-bis((1H-pyrrol-2-yl)methylene)hydrazine (1) was investigated for its chemosensor application. The colorimetric response of 1 with various ions was investigated, and the selective optical change upon mixing with Cu²⁺ was found. The Cu²⁺ binding stoichiometry of 1 derived from Job's plot and the in silico study give us the tentative structural detail of the binding mode of 1 and Cu²⁺ being 1:1. The binding constant between 1 and Cu²⁺ from the Benesi-Hildebrand plot was 1.49 × 10⁴ M^-1. The limit of detection of 1 in Cu²⁺ detection was 0.64 μM (0.040 ppm), which is much lower than the WHO and US EPA maximum allowable Cu²⁺ level in drinking water (2 and 1.3 ppm, respectively). The custom-built colorimeter demonstrates a good linear relationship between Cu²⁺ concentration and electrical resistance (Ω) upon 1-Cu²⁺ ion binding.

Aromatic-Ring-Fused BOPPY Fluorophores: Synthesis, Spectral, Redox Properties, and Bioimaging Application

Tetracoordinated organoboron dyes exhibiting strong fluorescence in either solution or the solid state are currently receiving much attraction in view of their photovoltaic, optoelectronic, and biological applications. Herein, a series of aromatic-ring-fused BOPPY dyes have been developed by one-pot condensation of formylated isoindoles or indoles and pyridinylhydrazine followed by subsequent borylation coordination. The facile synthesis provides excellent diversity of these unsymmetrical α-benzo- and β-benzothiophene-fused BOPPY dyes with intriguing photophysical properties owing to their rigid and planar structure and extended π-conjugation while containing a reactive site. They display intense green to orange fluorescence in solution and red-to-near-infrared emission in the solid state, with high fluorescence quantum yields up to 92 and 21%, respectively, relatively large Stokes shifts, and excellent photostability. Furthermore, two representative benzo-fused BOPPY probes with morpholine or benzenesulfonamide groups were developed and used to selectively "light up" the subcellular organelles such as lysosomes and endoplasmic reticulum under ultralow concentration, respectively.

Hybridising inorganic materials with fluorescent BOPHY dyes: A structural and optical comparative study

This study presents the design and characterization of new monochromatic light-harvesting systems based on inorganic porous materials hybridized with organic dye molecules within their structure. A new fluorescent BOPHY dye was prepared, characterized optically and used as both reference and synthetic precursor for two alkoxysilane derivatives that were incorporated separately within a silica structure. The dyes, one bearing one alkoxysilane group and the other one two, were co-condensed with tetraethyl orthosilicate to form a hybrid organo-silica framework, where they are found at specific locations. The structure of the new materials was analysed by powder XRD and TEM, which confirmed the presence of the hexagonal pore arrangement typical of mesoporous MCM-41 silica particles. The steady-state and time-resolved analysis showed that the particles where the dyes are most dispersed within the framework retain the highest fluorescence quantum yield, up to 0.63, in the green-yellow region of the visible spectrum. On the other hand, increasing the content of BOPHY units in the solid matrix seem to favour non-radiative deactivation pathways and aggregation phenomena, which lower the efficiency of light emission. The materials also exhibit interesting properties, such as a dual excited-state decay and fluorescence anisotropy. The short fluorescence lifetime, about 2 ns, matches the typical singlet lifetime of BOPHY dyes, whereas the long component, up to 20 ns, is attributed to delayed fluorescence, which could take place via charge recombination. Optical anisotropy experiments revealed that all materials show polarised light emission to a significant extent and, for most samples, it was also possible to determine a polarisation transfer decay trace, from 400 to 800 ps This is ascribed to the occurrence of energy migration between neighbouring dye units within the silica structure.

Investigations on the Synthesis, Reactivity, and Properties of Perfluoro-α-Benzo-Fused BOPHY Fluorophores

The synthesis and reactivity of 3,8-dibromo-dodecafluoro-benzo-fused BOPHY 2 are reported, via S_N Ar with O-, N- S- and C-nucleophiles, and in Pd(0)-catalyzed cross-coupling reactions (Suzuki and Stille). The resulting perfluoro-BOPHY derivatives were investigated for their reactivity in the presence of various nucleophiles. BOPHY 3 displays reversible color change and fluorescence quenching in the presence of bases (Et₃ N, DBU), whereas BOPHY 7 reacts preferentially at the α-pyrrolic positions, and BOPHY 8 undergoes regioselective fluorine substitution in the presence of thiols. The structural and electronic features of the fluorinated BOPHYs were studied by TD-DFT computations. In addition, their spectroscopic and cellular properties were investigated; BOPHY 10 shows the most red-shifted absorption/emission (λ_max 659/699 nm) and 7 the highest fluorescence (Φ_f =0.95), while all compounds studied showed low cytotoxicity toward human HEp2 cells and were efficiently internalized.

The Stability of Unsubstituted BOPHY in Various Media

In this communication, we report our findings on the stability of unsubstituted BOPHY in different media. Our studies showed that unsubstituted BOPHY is highly unstable in water, methanol, and DMSO. The dye was observed to be stable in aprotic and/or relatively apolar solvents (ACN, acetone, DCM, and toluene) for a routine application. The pH of the medium was shown to affect the stability of the dye dramatically. Herein, we also presented a one-pot procedure for the synthesis of the dye.

A Family of Highly Fluorescent and Membrane-Permeable Bis(BF2) Acyl-Pyridinylhydrazine Dyes with Strong Solid-State Emission and Large Stokes Shifts: The BOAPH Fluorophores

Organic small-molecule fluorescent chromophores have become essential to modern chemical, biological, and materials related investigations. Herein, a straightforward synthesis and subsequent borylation were presented to form a novel family of bisBF₂-anchoring acyl-pyridinylhydrazine, which we named BOAPH. The chromophore enjoys outstanding structural diversities owing to varied acyl chlorides and N-heteroarenylhydrazides. These resultant BOAPH dyes are confirmed by NMR, HRMS, and single-crystal X-ray structure analysis. Their spectroscopic properties were studied, and most of the strong absorbance and bright fluorescence with maximum wavelengths centered in the range of 400 and 650 nm. More importantly, they exhibit promising fluorescence quantum yields up to 0.79 in solution and solid states, good photostability, and large Stokes shifts. Furthermore, a respective BOAPH dye with a para-dimethylaminophenyl group exhibited the interesting ability of ultrafast staining and two-photon imaging, which can specifically label lipid droplets of living cells immediately without the need for incubation.

Sterically Protected and Conformation-Restricted BOBHY Dyes with Bright Near-Infrared Fluorescence: N2O-type Expanded BOPHY Dyes Derived from Boronic Acids

A new family of N₂O-type hydrazine-containing bipyrrole boron complexes has been developed via a one-pot condensation of formylisoindole, hydrazine, and various organoboronic acids. Because of the conformation-restricted coplanar structure and the axial-substituted aryl groups, these novel dyes show deep-red absorption, bright near-infrared (NIR) fluorescence in both solution and solid states, and good solubility in organic solvents. The derivative with pyridinium ions also has been synthesized as an NIR mitochondrially targetable fluorescent probe.

Similar, Yet Different: Long-Range Metal-Metal Coupling and Electron-Transfer Processes in Metal-Free 5,10,15,20-Tetra(ruthenocenyl)porphyrin

The electronic structure, redox properties, and long-range metal-metal coupling in metal-free 5,10,15,20-tetra(ruthenocenyl)porphyrin (H₂TRcP) were probed by spectroscopic (NMR, UV-vis, magnetic circular dichroism (MCD), and atmospheric pressure chemical ionization (APCI)), electrochemical (cyclic voltammetry, CV, and differential pulse voltammetry, DPV), spectroelectrochemical, and chemical oxidation methods, as well as theoretical (density functional theory, DFT, and time-dependent DFT, TDDFT) approaches. It was demonstrated that the spectroscopic properties of H₂TRcP are significantly different from those in H₂TFcP (metal-free 5,10,15,20-tetra(ferrocenyl)porphyrin). Ruthenocenyl fragments in H₂TRcP have higher oxidation potentials than the ferrocene groups in the H₂TFcP complex. Similar to H₂TFcP, we were able to access and spectroscopically characterize the one- and two-electron oxidized mixed-valence states in the H₂TRcP system. DFT predicts that the porphyrin π-system stabilizes the [H₂TRcP]⁺ mixed-valence cation and prevents its dimerization, which is characteristic for ruthenocenyl systems. However, formation of the mixed-valence [H₂TRcP]²⁺ is significantly less reproducible than the formation of [H₂TRcP]⁺. DFT and TDDFT calculations suggest the ruthenocenyl fragment dominance in the highest occupied molecular orbital (HOMO) energy region and the presence of the low-energy MLCT (Rc → porphyrin (π*)) transitions in the visible region with energies higher than the predominantly porphyrin-centered Q-bands.

Fundamental studies to emerging applications of pyrrole-BF2 (BOPHY) fluorophores

This review highlights the up-and-coming pyrrole-BF₂ (BOPHY) fluorophores, with a focus on synthetic procedures, photophysical properties – including structure–property analyses – as well as emerging applications.

Synthesis pathways for the preparation of the BODIPY analogues: aza-BODIPYs, BOPHYs and some other pyrrole-based acyclic chromophores

This mini-review summarizes the synthesis strategies for the preparation and post-functionalization of aza-BODIPYs, BOPHYs, “half-Pcs”, biliazines, MB-DIPYs, semihemiporphyrazines, BOIMPYs, BOPPYs, BOPYPYs, BOAHYs, and BOAPYs.

Probing Electronic Communication and Excited-State Dynamics in the Unprecedented Ferrocene-Containing Zinc MB-DIPY

The electronic communication between two ferrocene groups in the electron-deficient expanded aza-BODIPY analogue of zinc manitoba-dipyrromethene (MB-DIPY) was probed by spectroscopic, electrochemical, spectroelectrochemical, and theoretical methods. The excited-state dynamics involved sub-ps formation of the charge-separated state in the organometallic zinc MB-DIPYs, followed by recovery of the ground state via charge recombination in 12 ps. The excited-state behavior was contrasted with that observed in the parent complex that lacked the ferrocene electron donors and has a much longer excited-state lifetime (670 ps for the singlet state). Much longer decay times observed for the parent complex without ferrocene confirm that the main quenching mechanism in the ferrocene-containing 4 is reflective of the ultrafast ferrocene-to-MB-DIPY core charge transfer (CT).

A Family of BODIPY-like Highly Fluorescent and Unsymmetrical Bis(BF2) Pyrrolyl-Acylhydrazone Chromophores: BOAPY

A new family of pyrrolyl-acylhydrazones anchored with two BF₂ units, named BOAPY, have been developed as BODIPY-like and unsymmetrical bis(BF₂) chromophores via a simple one-pot reaction. The easily accessible scaffold enjoys excellent diversity due to the structural versatilities of 2-formylpyrroles and acylhydrazines. BOAPYs exhibit good molar absorption coefficients, large Stokes shifts, and excellent chemical stability. More importantly, most of them display excellent fluorescence quantum yields both in solution and the solid state (up to 0.88 and 0.64, respectively).

Rigid, yet flexible: formation of unprecedented silver MB-DIPY dimers with orthogonal chromophore geometry

Unprecedented for BODIPY/DIPY and aza-BODIPY/azaDIPY chemistry, MB-DIPY₂Ag₂ dimers with a twisted chromophore geometry were prepared and characterized by spectroscopy, X-ray crystallography, and DFT calculations.

Highly Luminescent Heavier Main Group Analogues of Boron-Dipyrromethene

The preparation and photophysical properties of two heavier main group element analogues of boron-dipyrromethene (BODIPY) chromophores are described. Specifically, we have prepared dipyrrin complexes of dichlorogallate (GADIPY) or phenylphosphenium (PHODIPY) units. Whereas cationic PHODIPY is labile, decomposing to a phosphine over time, GADIPY is readily prepared in good yield as a crystalline solid having moderate air- and water-stability. Crystallographically characterized GADIPY displays intense green photoluminescence (λ_em = 505 nm, Φ_em = 0.91 in toluene). These inaugural heavier main group element analogues of BODIPY offer a glimpse into the potential for elaboration to a panoply of chromophores with diverse photophysical properties.

Optical spectroscopic properties recorded for simple BOPHY dyes in condensed media: The mirror-symmetry factor

The BOPHY structural scaffold provides opportunities for the synthesis of innumerable derivatives with linear geometries and well-controlled π-conjugation pathways. The simpler BOPHY chromophores are highly fluorescent but exhibit poor mirror symmetry between absorption and fluorescence spectra at ambient temperature. In particular, the absorption (and excitation) spectra are broad and appear as two overlapping bands of comparable intensity. In constrained media, such as low-temperature rigid glasses or stretched poly(ethylene) films, mirror symmetry is restored. Analysis of the temperature dependence recorded for simple BOPHY derivatives indicates that the vibronic envelope accompanying the electronic transitions can be well described in terms of low- and medium-frequency modes. Whereas the fluorescence spectral profile is only weakly dependent on temperature, the excitation spectrum is far more affected. The magnitude of the low-frequency mode, and the associated electron-phonon coupling, increase substantially with increasing temperature and is responsible for temperature broadening and distortion of the excitation spectrum in solution. This critical low-frequency vibronic mode is associated with out-of-plane torsional bending of the BOPHY unit. Variable temperature NMR studies failed to provide unequivocal evidence for conformational changes of one of the derivatives over the temperature range 193-353 K.

End-to-end communication in a linear supermolecule with a BOPHY centre and N,N-dimethylanilino-based terminals

Long-range electrostatic interactions are sufficient to cause sequential ionization of the terminal groups in a BOPHY-based supermolecule.

A Ratiometric Fluorescent Sensor for Cd2+ Based on Internal Charge Transfer

This work reports on a novel fluorescent sensor 1 for Cd²⁺ ion based on the fluorophore of tetramethyl substituted bis(difluoroboron)-1,2-bis[(1H-pyrrol-2-yl)methylene]hydrazine (Me₄BOPHY), which is modified with an electron donor moiety of N,N-bis(pyridin-2-ylmethyl)benzenamine. Sensor 1 has absorption and emission in visible region, at 550 nm and 675 nm, respectively. The long wavelength spectral response makes it easier to fabricate the fluorescence detector. The sensor mechanism is based on the tunable internal charge transfer (ICT) transition of molecule 1. Binding of Cd²⁺ ion quenches the ICT transition, but turns on the π − π transition of the fluorophore, thus enabling ratiometric fluorescence sensing. The limit of detection (LOD) was projected down to 0.77 ppb, which is far below the safety value (3 ppb) set for drinking water by World Health Organization. The sensor also demonstrates a high selectivity towards Cd²⁺ in comparison to other interferent metal ions.

Structure and electronics in dimeric boron π expanded azine and salphen complexes

Although boron-based fluorophores incorporating nitrogenous chelating ligands have received much attention, there has been little work on examples of boron-salphen and azine derivatives. In this report, we present several π expanded boron salphen type complexes, incorporating both bis(2-hydroxynaphthaldehyde)azine as well as ortho, meta and para variants of the analogous 2-hydroxynaphthaldehyde salphen compounds. For the azine, we observed only the formation of a single BF₂ adduct, while for the naphth-phen compounds dimeric BF₂ binding was observed. All new compounds were fully characterized via X-ray diffraction, and both DFT and TDDFT studies were carried out to probe the electronic structures of these fluorophores.

Investigating the optical properties of BOIMPY dyes using ab initio tools

Using a computational approach combining Time-Dependent Density Functional Theory (TD-DFT) and second-order Coupled Cluster (CC2) approaches, we investigate the spectral properties of a large panel of BOIMPY dyes.

Ferrocene–BODIPYmerocyanine dyads: new NIR absorbing platforms with optical properties susceptible to protonation

Ferrocene–BODIPYmerocyanine dyads 5 and 6 were synthesized and characterized by spectroscopy, electrochemistry, and DFT calculations.

Reversal aggregation-induced circular dichroism from axial chirality transfer via self-assembled helical nanowires

Two chiral binaphthyl-based enantiomers, (R/S)-7, can produce gradual reversal AICD signals from solution to aggregation, which can be attributed to axial chirality transfer to self-assembled helical nanowires in aggregation state.

The synthesis and structures of 1,1'-bis(sulfonyl)ferrocene derivatives

A series of 1,1'-bis(sulfonyl)ferrocene compounds were produced via the 1,1'-bis(sulfonate)ferrocene ammonium salt. This compound can be readily converted to 1,1' bis(sulfonylchloride)ferrocene. By varying stoichiometry and reaction times, both mono- and bis-sulfonamide derivatives can be synthesized. All new compounds presented in this report have been structurally characterized. The structures of the bis-sulfonamide systems are similar to the well-studied bis(amide) ferrocene compounds. Intermolecular hydrogen bonding is observed, typically between NH and SO groups of neighboring sulfonamides. However in the bis(GABA) derivative, intermolecular NH to CO hydrogen bonding interactions are present.

Using Hydrazine to Link Ferrocene with Re(CO)3: A Modular Approach

Acetyl ferrocene and diacetyl ferrocene both readily react with an excess of hydrazine to afford the corresponding hydrazone compounds. These compounds can then be linked to Re(CO)₃ via a metal-mediated Schiff base reaction, resulting in a series of ferrocene-Re(CO)₃ conjugates with different stoichiometries. Conjugates with 1:1, 1:2, and 2:1 ferrocene: Re(CO)₃ ratios can be produced via this "modular" type synthesis approach. Several examples of these conjugates were structurally characterized, and their spectroscopic, electrochemical, and spectroelectrochemical behaviors were investigated. The electronic structures of these compounds were also probed using DFT and TDDFT calculations.

NIR absorbing diferrocene-containing meso-cyano-BODIPY with a UV-Vis-NIR spectrum remarkably close to that of magnesium tetracyanotetraferrocenyltetraazaporphyrin

Diferrocene-containing meso-cyano-BODIPY (4) was prepared and characterized by spectroscopy, X-ray crystallography, and DFT calculations.