Chiral phosphoric acid-catalyzed enantioselective [5+1] cycloaddition reaction of C,N-cyclic azomethine imines with isocyanides

The first catalytic enantioselective [5+1] cycloaddition reactions of C,N-cyclic azomethine imines with isocyanides are reported herein. The method displays a broad substrate scope and atom-economy. A series of chiral tetrahydroisoquinoline containing indole skeletons were obtained in up to 90% yield with 95% ee under mild reaction conditions. A possible catalytic model was also proposed.

Enantioselective Synthesis of 2,3,3a,8a-Tetrahydrofuro[2,3-b]benzofuran Scaffolds Enabled by Cu(II)/SPDO-Catalyzed [3+2] Cycloaddition of 2,3-Dihydrofuran and Quinone Esters

An asymmetric [3+2] cycloaddition of quinone esters with 2,3-dihydrofuran has been realized via a newly developed Cu(II)/SPDO complex. It provides straightforward access to 2,3,3a,8a-tetrahydrofuro[2,3-b]benzofurans (TFB) with high enantioselectivity (up to 97.5:2.5 er) and diastereoselectivity (all >20:1 dr). The resulting adducts contain two adjacent stereocenters and a continuously functionalized benzene ring. Additionally, this transformation could be easily performed on a gram scale, allowing for expedient synthesis of natural dihydroaflatoxin D2 and aflatoxin B2.

Synthesis of 5,6-Dihydropyrazolo[5,1-a]isoquinolines through Tandem Reaction of C,N-Cyclic Azomethine Imines with α,β-Unsaturated Ketones

An innovative and efficient approach has been developed for the synthesis of 5,6-dihydropyrazolo[5,1-a]isoquinolines. This one-pot tandem reaction involves the reaction of C,N-cyclic azomethine imines with α,β-unsaturated ketones, using K₂CO₃ as the base and DDQ as the oxidant. The process results in functionalized 5,6-dihydropyrazolo[5,1-a]isoquinolines with good yields. This convenient one-step method encompasses a tandem [3 + 2]-cycloaddition, detosylation, and oxidative aromatization.

Chemodivergent 1,3-Dipolar Cycloadditions of C,N-Cyclic Azomethine Imines with γ-Sulfonamido-α,β-Unsaturated Ketones to Synthesize Tricyclic Dinitrogen-Fused Heterocycles

1,3-Dipolar cycloadditions of C,N-cyclic azomethine imines with γ-NHTs-α,β-unsaturated ketones were developed to synthesize tricyclic dinitrogen-fused heterocycles. Highly functionalized tricyclic tetrahydroisoquinolines were readily obtained in good to high yields in the [3 + 2]-cycloaddition reaction of N-Bz-protected C,N-cyclic azomethine imines with γ-NHTs-α,β-unsaturated ketones under mild reaction conditions. Moreover, DABCO-catalyzed cycloaddition of N-Ts-protected C,N-cyclic azomethine imines with γ-NHTs-α,β-unsaturated ketones followed by cleavage of the tosyl group is a convenient route to synthesize tetrahydropyrazolo [5,1-a]isoquinolines in good yields with excellent diastereoselectivities.

Asymmetric inverse-electron-demand 1,3-dipolar cycloadditions of cyclopentadienones and thiophene-1,1-dioxide with C,N-cyclic azomethine imines

The normal 1,3-dipolar cycloaddition between the carbonates of 4-hydroxy-2-cyclopentenones and C,N-cyclic azomethine imines can be switched to an inverse-electron-demand version under Pd(0) catalysis, by in situ generation of HOMO-raised η²-Pd(0)-cyclopentadienone complexes. An array of fused heterocyclic architectures are constructed with high levels of diastereo and enantioselectivity, and diastereodivergent synthesis is well realised by tuning the bifunctional phosphine ligands. In addition, similar reaction with in situ formed thiophene-1,1-dioxide is compatible by using a chiral bisphosphine ligand, and the fused cyclic sulfone frameworks are afforded with high stereoselectivity.

An overview of the applications of chiral phosphoric acid organocatalysts in enantioselective additions to CO and CN bonds

Since 2004, chiral phosphoric acids (CPAs) have emerged as highyl efficient organocatalysts, providing excellent results in a wide reaction scope. In this review, the applications of CPA for enantioselective additions to CO and CN bonds are covered.

An overview of the reactions involving azomethine imines over half a decade

Azomethine imines constitute a versatile class of 1,3-dipoles which was used extensively for biologically relevant N-heterocycle synthesis – a five-year recap.

A rhodium-catalysed three-component reaction to access C1-substituted tetrahydroisoquinolines

A rhodium-catalyzed three-component reaction of diazo compounds, anilines and C,N-cyclic azomethine imines via trapping of transient ammonium ylides was developed. This reaction provided a simple and convenient approach for the synthesis of pharmaceutically intriguing tetrahydroisoquinoline derivatives in moderate to good yields (36-85%) with good diastereoselectivities (up to 95 : 5 dr) under mild reaction conditions.

Cross 1,3-dipolar cycloadditions of C,N-cyclic azomethine imines with an N-benzyl azomethine ylide: facile access to fused tricyclic 1,2,4-hexahydrotriazines

A cross 1,3-dipolar cycloaddition of two different ylides between C,N-cyclic azomethine imines with an in situ-generated nonstabilized azomethine ylide from an N-benzyl precursor was realized. The reactions afforded a clean and facile access to diverse fused tricyclic 1,2,4-hexahydrotriazines in high yields (up to 96%). The chemical structures of the typical compounds were confirmed by X-ray single-crystal structure analysis.

Catalyst and Additive-Free Diastereoselective 1,3-Dipolar Cycloaddition of Quinolinium Imides with Olefins, Maleimides, and Benzynes: Direct Access to Fused N,N'-Heterocycles with Promising Activity against a Drug-Resistant Malaria Parasite

A convenient and eco-friendly synthesis of various fused N-heterocyclic compounds through catalyst and additive-free 1,3 dipolar cycloadditions of quinolinium imides with olefins, maleimides, and benzynes in excellent yields and diastereoselectivities is reported. The thermally controlled diastereoselective [3 + 2] cycloaddition reaction between quinolinium imides and olefins provided cis-isomers at low temperature and trans-isomers at high temperature. A reaction between quinolinium imides with substituted maleimides gave four-ring-fused N-heterocyclic compounds in high yields as a single diastereomer. The aryne precursors also provided four-ring-fused N,N'-heterocyclic compounds in high yields. The in vitro antiplasmodial activity of selected molecules revealed that this class of molecules possesses potential for ongoing studies against malaria.

Base-mediated diastereoselective [4 + 3] annulation of in situ generated ortho-quinone methides with C,N-cyclic azomethine imines

An efficient [4 + 3] annulation of 2-(1-tosylalkyl)phenols with C,N-cyclic azomethine imines via in situ generation of ortho-quinone methides (o-QMs) under mild basic reaction conditions is disclosed, furnishing biologically interesting seven-membered heterocyclic compounds with moderate to good yields and excellent diastereoselectivities. A gram-scale reaction is performed to demonstrate the potential in industrial application and two transition states are proposed to rationalize the outstanding diastereoselectivity.

Synthesis of Non-Racemic Pyrazolines and Pyrazolidines by [3+2] Cycloadditions of Azomethine Imines

Asymmetric [3+2] cycloadditions of azomethine imines comprise a useful synthetic tool for the construction of pyrazole derivatives with a variable degree of saturation and up to three stereogenic centers. As analogues of pyrrolidines and imidazolidines that are abundant among natural products, pyrazoline and pyrazolidine derivatives represent attractive synthetic targets due to their extensive applications in the chemical and medicinal industries. Following the increased understanding of the mechanistic aspect of metal-catalyzed and organocatalyzed [3+2] cycloadditions of 1,3-dipoles gained over recent years, significant strides have been taken to design and develop new protocols that proceed efficiently under mild synthetic conditions and duly benefit from superior functional group tolerance and selectivity. In this review, we represent the current state of the art in this field and detailed methods for the synthesis of non-racemic pyrazolines and pyrazolidines via [3+2] metal and organocatalyzed transformations reported since the seminal work of Kobayashi et al. and Fu et al. in 2002 and 2003 up to the end of year 2017.

Organocatalytic Enantioselective Acyloin Rearrangement of α-Hydroxy Acetals to α-Alkoxy Ketones

We report an unprecedented organocatalytic enantioselective acyloin rearrangement of α,α-disubstituted α-hydroxy acetals. In the presence of a catalytic amount of chiral binol-derived N-triflyl phosphoramide, α-hydroxy acetals rearranged to α-alkoxy ketones in good to high yields with high enantioselectivities. Formation of an ion pair between the in situ generated oxocarbenium ion and the chiral phosphoramide anion was proposed to be responsible for the highly efficient transfer of chirality. Conditions for removal of cyclohexyl and cyclopentyl groups from the corresponding α-alkoxy ketones were uncovered underpinning their potential general utility as hydroxy protecting groups. Conversion of the rearranged products to the enantioenriched α-hydroxy ketone, 1,2-diol, β-amino alcohol and 1,4-dioxane was also documented.

Rhodium-catalyzed intermolecular [3+3] cycloaddition of vinyl aziridines with C,N-cyclic azomethine imines: stereospecific synthesis of chiral fused tricyclic 1,2,4-hexahydrotriazines

A new rhodium-catalyzed intermolecular [3+3] cycloaddition of vinylaziridines with C,N-cyclic azomethine imines has been described to construct enantioenriched 1,2,4-hexahydrotriazines.