A Heterogeneous Photocatalytic Hydrogen Evolution Dyad: [(tpy

Terpyridine Ni(II) Complex Grafted CdS Nanorods for Cooperative Selective Benzyl Alcohol Oxidation and Hydrogen Production

Efficient utilization of photogenerated charge carriers to realize photocatalytic solar fuel production and oxidative chemical synthesis is a challenging task. Herein, a conventional amidation reaction route is adopted to successfully construct a novel composite photocatalyst composed of a Ni(II)-terpyridine complex with carboxyl groups grafted on CdS nanorods (labeled as CdS@Ni(terpyC)2). Experimental results have unequivocally revealed that the as-fabricated composite catalyst exhibited a remarkable enhancement in photocatalytic activity for the dehydrogenation of benzyl alcohol under visible light, demonstrating superior hydrogen evolution efficiency and benzaldehyde selectivity, surpassing both pristine CdS and the blend of CdS and Ni(terpyC)2. The carrier dynamics study demonstrated that the Ni(terpyC)2 on the surface of CdS could quickly extract the photogenerated electrons of CdS, which reduced the carrier recombination efficiency, further improving the photocatalytic activity of the catalyst. This work illustrates the effect of surface active site engineering on photocatalysis and is expected to shed substantial inspiration on future surface modulation and design of semiconductor photocatalysts.

A thiophene-linked terpyridine based phenanthridine chemoreceptor for Cd2+ and Cr3+ selective ratiometric fluorescence detection in environmental water and rice samples

BACKGROUND

The studied materials, Cadmium (Cd2+) and Chromium (Cr3+) are highly toxic, and it focuses on investigating various environmental sources, such as industrial processes and waste water. When quantities of Cr3+ and Cd2+ exceed the allowable limit, biological toxicity and hazardous environmental pollution are unavoidable. In order to address this problem, we introduce 5-(5-(4-([2,2':6',2″-terpyridin]-4'-yl) phenyl) thiophen-2-yl)-7,8,13,14-tetrahydrodibenzo [a,i] phenanthridine (TPTP), a dual-emission response chemosensor that employs a colorimetric and fluorescence turn-on approach for the rapid, sensitive, and discriminate detection of Cr3+ and Cd2+ ions.

RESULTS

We created a newly designed luminous TPTP sensor based on intramolecular charge transfer (ICT). TPTP sensor probe specifically determined Cr3+ and Cd2+ ions with an immediate colour shift from cyan to green and orange in CH3CN: H2O (6:4) solvent solution. The permissible level set by the Environmental Protection Agency (EPA) of the United States for the presence of Cr3+ and Cd2+ ions in drinking water was higher than the detection level of 3.5 and 9.7 nM, by this sensor respectively. NMR titrations, HRMS, and theoretical calculation methods were employed to examine the accurate sensing processes of TPTP and complexes.

SIGNIFICANCE

This is an effective method of detecting Cr3+ and Cd2+ ions in an environmental system using a ratiometric methodology. In addition, TPTP was used to determine the concentration of Cr3+ and Cd2+ ions in natural water and food samples. Fluorescent bio-imaging studies revealed that the present sensor TPTP could identify Cr3+ and Cd2+ ions inside living HeLa cells. A paper kit analysis has been done on TPTP, which has a time-to-result of less than 1 s and offers a cost-effective assay. As a result, the platform offers portability.

A novel phenanthridine and terpyridine based D-π-A fluorescent probe for the ratiometric detection of Cd2+ in environmental water samples and living cells

A "turn-on" Donor-π-Acceptor (D-π-A) containing phenanthridine-functionalized extended π-conjugate terpyridine, 5-(4'-([2,2':6',2''-terpyridin]-4'-yl)-[1,1'-biphenyl]4-yl)7,8,13,14-tetrahydrodibenzo [a, i] phenanthridine (TBTP) was synthesised. It shows strong selectivity for the detection of toxic Cd²⁺ without interference from other metal ions. In the presence of Cd²⁺, the absorption of the TBTP changes dramatically along with the fluorescent emission with the large Stokes shift of 6300 cm^-1. When the compound TBTP is exposed to UV light, its colour changes from blue to orange over the addition of Cd²⁺. Adding other transition metal ions has no effect. This is based on the mechanism of intramolecular charge transfer. The detection limit for Cd²⁺ was found to be around 1.181 × 10^-8 M. An investigation of the sensing mechanism includes job plot, NMR titration, DFT calculation, and HRMS analyses. Excitingly, the recognition of Cd²⁺ in CH₃CN: H₂O (8:2, v/v) medium is quantitative without interference from Zn^2+, which is a common interferent for Cd²⁺. Furthermore, the probe was used for detecting Cd²⁺ in real water samples and cell imaging in living cells was also performed.

Electro- and Solar-Driven Fuel Synthesis with First Row Transition Metal Complexes

The synthesis of renewable fuels from abundant water or the greenhouse gas CO2 is a major step toward creating sustainable and scalable energy storage technologies. In the last few decades, much attention has focused on the development of nonprecious metal-based catalysts and, in more recent years, their integration in solid-state support materials and devices that operate in water. This review surveys the literature on 3d metal-based molecular catalysts and focuses on their immobilization on heterogeneous solid-state supports for electro-, photo-, and photoelectrocatalytic synthesis of fuels in aqueous media. The first sections highlight benchmark homogeneous systems using proton and CO2 reducing 3d transition metal catalysts as well as commonly employed methods for catalyst immobilization, including a discussion of supporting materials and anchoring groups. The subsequent sections elaborate on productive associations between molecular catalysts and a wide range of substrates based on carbon, quantum dots, metal oxide surfaces, and semiconductors. The molecule-material hybrid systems are organized as "dark" cathodes, colloidal photocatalysts, and photocathodes, and their figures of merit are discussed alongside system stability and catalyst integrity. The final section extends the scope of this review to prospects and challenges in targeting catalysis beyond "classical" H2 evolution and CO2 reduction to C1 products, by summarizing cases for higher-value products from N2 reduction, C x>1 products from CO2 utilization, and other reductive organic transformations.

Mini-review on an engineering approach towards the selection of transition metal complex-based catalysts for photocatalytic H2 production

Advances in transition-metal (Ru, Co, Cu, and Fe) complex-based catalysts since 2000 are briefly summarized in terms of catalyst selection and application for photocatalytic H₂ evolution.

A protocol for quantifying hydrogen evolution by dye-sensitized molecular photocathodes and its implementation for evaluating a new covalent architecture based on an optimized dye-catalyst dyad

A protocol that combines gas chromatography and a high-sensitivity micro Clark-type electrode is described to quantify hydrogen production across gas and solution phases for systems operating at very low currents such as dye-sensitized H₂-evolving photocathodes. Data indicate that a significant fraction of H₂ remains in aqueous solution even after several hours of experiments. Using this protocol, re-evaluation of a dye-sensitized H₂-evolving photocathode based on a dye-catalyst dyad showed a reproducible 66% increase of the faradaic efficiency compared with previously reported headspace GC measurements [Kaeffer et al., J. Am. Chem. Soc., 2016, 138, 12308-12311]. This dyad was based on an organic push-pull dye where donor and acceptor are separated by one thiophene group. Insertion of a second thiophene group between the donor and acceptor led to a more efficient system with 30% improved faradaic efficiency for H₂ evolution.

Electrocatalytic and Photocatalytic Reduction of CO2 to CO by Cobalt(II) Tripodal Complexes: Low Overpotentials, High Efficiency and Selectivity

The reduction of carbon dioxide (CO₂ ) has been considered as an approach to mitigate global warming and to provide renewable carbon-based fuels. Rational design of efficient, selective, and inexpensive catalysts with low overpotentials is urgently desired. In this study, four cobalt(II) tripodal complexes are tested as catalysts for CO₂ reduction to CO in a MeCN/H₂ O (4:1 v/v) solution. The replacement of pyridyl groups in the ligands with less basic quinolinyl groups greatly reduces the required overpotential for CO₂ -to-CO conversion down to 200-380 mV. Benefitting from the low overpotentials, a photocatalyst system for CO₂ -to-CO conversion is successfully constructed, with an maximum turnover number (TON) of 10 650±750, a turnover frequency (TOF) of 1150±80 h^-1 , and almost 100 % selectivity to CO. These outstanding catalytic performances are further elucidated by DFT calculations.

A sulfur vacancy rich CdS based composite photocatalyst with g-C3N4 as a matrix derived from a Cd-S cluster assembled supramolecular network for H2 production and VOC removal

By calcination, a sulfur vacancy rich CdS based composite photocatalyst with graphitic carbon nitride (g-C₃N₄) as a matrix has been synthesized successfully from a tetranuclear Cd-S cluster assembled supramolecular network. In this photocatalyst (CdS@g-C₃N₄), CdS nanoparticles with a size of about 5 to 8 nm disperse homogenously in the g-C₃N₄ matrix. During calcination, some coordinated nitrogen atoms dope in the lattice of CdS and replace sulfur atoms, which generates a large number of sulfur vacancies. Under visible light irradiation, CdS@g-C₃N₄ exhibits excellent H₂ production activity with a rate achieving as high as 19.88 mmol g^-1 h^-1 in the absence of a Pt cocatalyst. Its H₂ production ability remains stable for 30 h, which does not decay. Besides H₂ production, CdS@g-C₃N₄ also shows excellent photocatalytic activity for Volatile Organic Compound (VOC) degradation. For a photocatalyst, chemical content plays an important role in its performance. Here, the influence of sulfur vacancies on H₂ production and VOC degradation is discussed in detail. We expect that the sulfur vacancy rich CdS@g-C₃N₄ can act as an efficient material for H₂ production and indoor air purification.

Development of a framework catalyst for photocatalytic hydrogen evolution

The self-assembly of a catalyst module afforded a novel framework catalyst with long-lived activity and reusability for photocatalytic hydrogen production.