Heterocyclic Bismuth(III) Dithiocarbamato Complexes as Single-Source Precursors for the Synthesis of Anisotropic Bi2S3Nanoparticles

Solid state engineering of Bi2S3/rGO nanostrips: an excellent electrode material for energy storage applications

The study presents a novel, one-pot, and scalable solid-state reaction scheme to prepare bismuth sulphide (Bi2S3)-reduced graphene oxide (rGO) nanocomposites using bismuth oxide (Bi2O3), thiourea (TU), and graphene oxide (GO) as starting materials for energy storage applications. The impact of GO loading concentration on the electrochemical performance of the nanocomposites was investigated. The reaction follows a diffusion substitution pathway, gradually transforming Bi2O3 powder into Bi2S3 nanostrips, concurrently converting GO into rGO. Enhanced specific capacitances were observed across all nanocomposite samples, with the Bi2S3@0.2rGO exhibiting the highest specific capacitance of 705 F g-1 at a current density of 1 A g-1 and maintaining a capacitance retention of 82% after 1000 cycles. The superior specific capacitance is attributed to the excellent homogeneity and synergistic relation between rGO and Bi2S3 nanostrips. This methodology holds promise for extending the synthesis of other chalcogenides-rGO nanocomposites.

Controlled synthesis of photoresponsive bismuthinite (Bi2S3) nanostructures mediated through a new 1D bismuth-pyrimidylthiolate coordination polymer as a molecular precursor

Bismuthinite (Bi2S3) nanostructures have garnered significant interest due to their appealing photoresponsivity which has positioned them as an attractive choice for energy conversion applications. However, to utilize their full potential, a simple and economically viable method of preparation is highly desirable. Herein, we present the synthesis and characterization including structural elucidation of a new air- and moisture-stable bismuth-pyrimidylthiolate complex. This complex serves as an efficient single-source molecular precursor for the facile preparation of phase-pure Bi2S3 nanostructures. Powder X-ray diffraction (PXRD), Raman spectroscopy, electron dispersive spectroscopy (EDS) and electron microscopy techniques were used to assess the crystal structure, phase purity, elemental composition and morphology of the as-prepared nanostructures. This study also revealed the profound effects of temperature and growth duration on the crystallinity, phase formation and morphology of nanostructures. The optical band gap of the nanostructures was tuned within the range of 1.9-2.3 eV, which is blue shifted with respect to the bulk bandgap and suitable for photovoltaic applications. Liquid junction photo-electrochemical cells fabricated from the as-prepared Bi2S3 nanostructure exhibit efficient photoresponsivity and good photo-stability, which project them as promising candidates for alternative low-cost photon absorber materials.

Facile Fabrication of Ni9 S8 /Ag2 S Intertwined Structures for Oxygen and Hydrogen Evolution Reactions

Here, we report the fabrication of the unique intertwined Ni₉ S₈ /Ag₂ S composite structure with hexagonal shape from their molecular precursors by one-pot thermal decomposition. Various spectroscopic and microscopic techniques were utilized to confirm the Ni₉ S₈ /Ag₂ S intertwined structure. Powder X-ray Powder Diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis suggest that there is an enrichment of Ni₉ S₈ phase in Ni₉ S₈ /Ag₂ S. The presence of Ag₂ S in Ni₉ S₈ /Ag₂ S improves the conductivity by reducing the interfacial energy and charge transfer resistance. When Ni₉ S₈ /Ag₂ S is employed as an electrocatalyst for electrochemical oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) activity, it requires a low overpotential of 152 mV for HER and 277 mV for OER to obtain the geometrical current density of 10 mA cm^-2 , which is definitely superior to that of its components Ni₉ S₈ and Ag₂ S. This work provides a simple design route to develop an efficient and durable electrocatalyst with outstanding OER and HER performance and the present catalyst (Ni₉ S₈ /Ag₂ S) deserves as a potential candidate in the field of energy conversion systems.

Interfacial Engineering of CuCo2S4/g-C3N4 Hybrid Nanorods for Efficient Oxygen Evolution Reaction

Altering the morphology of electrochemically active nanostructured materials could fundamentally influence their subsequent catalytic as well as oxygen evolution reaction (OER) performance. Enhanced OER activity for mixed-metal spinel-type sulfide (CuCo₂S₄) nanorods is generally done by blending the material that has high conductive supports together with those having a high surface volume ratio, for example, graphitic carbon nitrides (g-C₃N₄). Here, we report a noble-metal-free CuCo₂S₄ nanorod-based electrocatalyst appropriate for basic OER and neutral media, through a simple one-step thermal decomposition approach from its molecular precursors pyrrolidine dithiocarbamate-copper(II), Cu[PDTC]₂, and pyrrolidine dithiocarbamate-cobalt(II), Co[PDTC]₂ complexes. Transmission electron microscopy (TEM) images as well as X-ray diffraction (XRD) patterns suggest that as-synthesized CuCo₂S₄ nanorods are highly crystalline in nature and are connected on the g-C₃N₄ support. Attenuated total reflectance-Fourier-transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy studies affirm the successful formation of bonds that bridge (Co-N/S-C) at the interface of CuCo₂S₄ nanorods and g-C₃N₄. The kinetics of the reaction are expedited, as these bridging bonds function as an electron transport chain, empowering OER electrocatalytically under a low overpotential (242 mV) of a current density at 10 mA cm^-2 under basic conditions, resulting in very high durability. Moreover, CuCo₂S₄/g-C₃N₄ composite nanorods exhibit a high catalytic activity of OER under a neutral medium at an overpotential of 406 mV and a current density of 10 mA cm^-2.

Dithiocarbamate Complexes as Single Source Precursors to Nanoscale Binary, Ternary and Quaternary Metal Sulfides

Nanodimensional metal sulfides are a developing class of low-cost materials with potential applications in areas as wide-ranging as energy storage, electrocatalysis, and imaging. An attractive synthetic strategy, which allows careful control over stoichiometry, is the single source precursor (SSP) approach in which well-defined molecular species containing preformed metal-sulfur bonds are heated to decomposition, either in the vapor or solution phase, resulting in facile loss of organics and formation of nanodimensional metal sulfides. By careful control of the precursor, the decomposition environment and addition of surfactants, this approach affords a range of nanocrystalline materials from a library of precursors. Dithiocarbamates (DTCs) are monoanionic chelating ligands that have been known for over a century and find applications in agriculture, medicine, and materials science. They are easily prepared from nontoxic secondary and primary amines and form stable complexes with all elements. Since pioneering work in the late 1980s, the use of DTC complexes as SSPs to a wide range of binary, ternary, and multinary sulfides has been extensively documented. This review maps these developments, from the formation of thin films, often comprised of embedded nanocrystals, to quantum dots coated with organic ligands or shelled by other metal sulfides that show high photoluminescence quantum yields, and a range of other nanomaterials in which both the phase and morphology of the nanocrystals can be engineered, allowing fine-tuning of technologically important physical properties, thus opening up a myriad of potential applications.

Electrochemistry of Inorganic OCT-PbS/HDA and OCT-PbS Photosensitizers Thermalized from Bis(N-diisopropyl-N-octyldithiocarbamato) Pb(II) Molecular Precursors

Inorganic nanocrystal solar cells have been tagged as the next generation of synthesizers that have the potential to break new ground in photovoltaic cells. This synthetic route offers a safe, easy and cost-effective method of achieving the desired material. The present work investigates the synthesis of inorganic PbS sensitizers through a molecular precursor route and their impact on improving the conversion efficiency in photovoltaic cells. PbS photosensitizers were deposited on TiO2 by direct deposition, and their structure, morphologies and electrocatalytic properties were examined. The X-ray diffraction (XRD) confirms PbS nanocrystal structure and the atomic force microscopy (AFM) displays the crystalline phase of uniform size and distribution of PbS, indicating compact surface nanoparticles. The electrocatalytic activity by lead sulfide, using N-di-isopropyl-N-octyldithiocarbamato (OCT) without hexadecylamine (HDA) capping (OCT-PbS) was very low in HI-30 electrolyte, due to its overpotential, while lead sulfide with OCT and HDA-capped (OCT-PbS/HDA) sensitizer exhibited significant electrocatalytic activity with moderate current peaks due to a considerable amount of reversibility. The OCT-PbS sensitizer exhibited a strong resistance interaction with the electrolyte, indicating very poor catalytic activity compared to the OCT-PbS/HDA sensitizer. The values of the open-circuit voltage (VOC) were ~0.52 V, with a fill factor of 0.33 for OCT-PbS/HDA. The better conversion efficiency displayed by OCT-PbS/HDA is due to its nanoporous nature which improves the device performance and stability.

Microwave-assisted synthesis of PbS nanostructures

The synthesis of PbS nanostructures by microwave irradiation of single source precursor compounds in ethyleneglycol medium is reported. Pb(II) bis(N-ethyl-N-phenyldithiocarbamate) and Pb(II) bis(N-butyl-N-phenyldithiocarbamate) represented as complexes (1) and (2) respectively were utilised. The prepared PbS nanostructures were characterized using X-ray diffraction (XRD), Transmission electron microscopy (TEM), and absorption spectroscopy. The results showed that complex (1) can project the formation of nanorod with (111) basal plane, while (2) project the formation of nanocube with (001) basal plane. The formation of different morphologies in ethylene glycol may also be due to the selective binding to specific crystallite facets of the PbS through the hydroxyl groups of ethylene glycol. In the nanorod, the selective stabilization of the (111) face of PbS, resulted in anisotropic growth along the (100) face. The high resolution TEM images showed distinct lattice fringes which confirmed the crystallinity of the nanostructures. The band gap energies were obtained as 1.10 and 1.12 eV for the nanorods and nanocubes respectively, a significant blue shift from the bulk value (0.4 eV) which could be ascribed to quantum confinement effect. The result established the significant effect of the precursor type on the morphologies of the PbS.

Synthesis of (Bi1−xSbx)2S3 solid solutions via thermal decomposition of bismuth and antimony piperidinedithiocarbamates

The synthesis of the complete range of (Bi_1−xSb_x)₂S₃ solid solutions, where 0 ≤ x ≤ 1, by the variation of the mole ratio of bismuth and antimony piperidine dithiocarbamate complexes is reported. There was a near linear expansion of a and c lattice parameters as the mole ratio of the antimony precursor was increased. The composition of the particles directionally followed the amount of precursor ratio used. When the composition of particles was compared to cell parameters, a slight deviation from Vegard's law was observed with a corresponding contraction of the b parameter and an approximately 3.5% reduction of the lattice volume. The nanorods obtained showed aspect ratios that depend on the composition of the material. The Bi and Sb rich materials had high aspect ratios of 16.58 and 16.58 respectively with a minimum aspect ratio of 2.58 observed for x = 0.50.

A full range of (Bi_1−xSb_x)₂S₃ solid solutions from bismuth and antimony piperidine dithiocarbamate complexes is reported.

Synthesis, structural and antimicrobial studies of binary and ternary complexes of a new tridentate thiosemicarbazone

A new thiosemicarbazone ligand was synthesized and characterized using spectroscopic techniques (UV-Vis and IR) and synchrotron x-ray powder diffraction. With M²⁺ = Mn²⁺, Zn²⁺ and Cd²⁺, coordination compounds of the type (M[L]₂) were isolated. In the presence of sodium dithiocarbamate salts (NadiEtdtc.3H₂O = sodium diethyldithiocarbamate trihydrate and Napipdtc = sodium piperidinedithiocarbamate), Zn²⁺ and Cd²⁺ were able to form ternary octahedral complexes where each metal binds a deprotonated (thiosemicarbazone) ligand, a monobasic dithiocarbamate ligand and a water molecule. In vitro biological evaluation tests of the free HL ligand and its metal complexes against selected fungal and bacterial cultures were performed. Compared with HL, the complexes displayed enhanced biological activities and ternary Zn (II) complexes displayed comparable antibacterial activities to the chloramphenicol standard.