Cobalt-Porphyrin-Catalysed Intramolecular Ring-Closing C-H Amination of Aliphatic Azides: A Nitrene-Radical Approach to Saturated Heterocycles

Metalloradical Catalysis: General Approach for Controlling Reactivity and Selectivity of Homolytic Radical Reactions

Since Friedrich Wöhler's groundbreaking synthesis of urea in 1828, organic synthesis over the past two centuries has predominantly relied on the exploration and utilization of chemical reactions rooted in two-electron heterolytic ionic chemistry. While one-electron homolytic radical chemistry is both rich in fundamental reactivities and attractive with practical advantages, the synthetic application of radical reactions has been long hampered by the formidable challenges associated with the control over reactivity and selectivity of high-energy radical intermediates. To fully harness the untapped potential of radical chemistry for organic synthesis, there is a pressing need to formulate radically different concepts and broadly applicable strategies to address these outstanding issues. In pursuit of this objective, researchers have been actively developing metalloradical catalysis (MRC) as a comprehensive framework to guide the design of general approaches for controlling over reactivity and stereoselectivity of homolytic radical reactions. Essentially, MRC exploits the metal-centered radicals present in open-shell metal complexes as one-electron catalysts for homolytic activation of substrates to generate metal-entangled organic radicals as the key intermediates to govern the reaction pathway and stereochemical course of subsequent catalytic radical processes. Different from the conventional two-electron catalysis by transition metal complexes, MRC operates through one-electron chemistry utilizing stepwise radical mechanisms.

Markovnikov-Selective Cobalt-Catalyzed Wacker-Type Oxidation of Styrenes into Ketones under Ambient Conditions Enabled by Hydrogen Bonding

The replacement of palladium catalysts for Wacker-type oxidation of olefins into ketones by first-row transition metals is a relevant approach for searching more sustainable protocols. Besides highly sophisticated iron catalysts, all the other first-row transition metal complexes have only led to poor activities and selectivities. Herein, we show that the cobalt-tetraphenylporphyrin complex is a competent catalyst for the aerobic oxidation of styrenes into ketones with silanes as the hydrogen sources. Remarkably, under room temperature and air atmosphere, the reactions were exceedingly fast (up to 10 minutes) with a low catalyst loading (1 mol %) while keeping an excellent chemo- and Markovnikov-selectivity (up to 99 % of ketone). Unprecedently high TOF (864 h-1 ) and TON (5,800) were reached for the oxidation of aromatic olefins under these benign conditions. Mechanistic studies suggest a reaction mechanism similar to the Mukaiyama-type hydration of olefins with a change in the last fundamental step, which controls the chemoselectivity, thanks to a unique hydrogen bonding network between the ethanol solvent and the cobalt peroxo intermediate.

New Mode of Asymmetric Induction for Enantioselective Radical N-Heterobicyclization via Kinetically Stable Chiral Radical Center

Enantioselective radical N-heterobicyclization of N-allylsulfamoyl azides have been developed via metalloradical catalysis (MRC). The Co(II)-based catalytic system can homolytically activate the organic azides with varied electronic and steric properties for asymmetric radical N-heterobicyclization under mild conditions without the need of oxidants, allowing for stereoselective construction of chiral [3.1.0]-bicyclic sulfamoyl aziridines in excellent yields with high diastereoselectivities and enantioselectivities. The key to achieving the enantioselective radical process relies on catalyst development through ligand design. We demonstrate that the use of new-generation D2-symmetric chiral bridged amidoporphyrin ligand HuPhyrin with judicious variation of the alkyl bridge length can dictate both reactivity and selectivity of Co(II)-based MRC. We present both experimental and computational studies that shed light on the working details of the unprecedented mode of asymmetric induction consisting of enantioface-selective radical addition and stereospecific radical substitution. We showcase the synthetic applications of the resulting enantioenriched bicyclic aziridines through a number of stereospecific transformations.

Catalytic, asymmetric carbon-nitrogen bond formation using metal nitrenoids: from metal-ligand complexes via metalloporphyrins to enzymes

The introduction of nitrogen atoms into small molecules is of fundamental importance and it is vital that ever more efficient and selective methods for achieving this are developed. With this aim, the potential of nitrene chemistry has long been appreciated but its application has been constrained by the extreme reactivity of these labile species. This liability however can be attenuated by complexation with a transition metal and the resulting metal nitrenoids have unique and highly versatile reactivity which includes the amination of certain types of aliphatic C-H bonds as well as reactions with alkenes to afford aziridines. At least one new chiral centre is typically formed in these processes and the development of catalysts to exert control over enantioselectivity in nitrenoid-mediated amination has become a growing area of research, particularly over the past two decades. Compared with some synthetic methods, metal nitrenoid chemistry is notable in that chemists can draw from a diverse array of metals and catalysts , ranging from metal-ligand complexes, bearing a variety of ligand types, via bio-inspired metalloporphyrins, all the way through to, very recently, engineered enzymes themselves. In the latter category in particular, rapid progress is being made, the rate of which suggests that this approach may be instrumental in addressing some of the outstanding challenges in the field. This review covers key developments and strategies that have shaped the field, in addition to the latest advances, up until September 2023.

Computational Mechanistic Investigations of Biocatalytic Nitrenoid C-H Functionalizations via Engineered Heme Proteins

Engineered heme proteins were developed to possess numerous excellent biocatalytic nitrenoid C-H functionalizations. Computational approaches such as density functional theory (DFT), hybrid quantum mechanics/molecular mechanics (QM/MM), and molecular dynamics (MD) calculations were employed to help understand some important mechanistic aspects of these heme nitrene transfer reactions. This review summarizes advances of computational reaction pathway results of these biocatalytic intramolecular and intermolecular C-H aminations/amidations, focusing on mechanistic origins of reactivity, regioselectivity, enantioselectivity, diastereoselectivity as well as effects of substrate substituent, axial ligand, metal center, and protein environment. Some important common and distinctive mechanistic features of these reactions were also described with brief outlook of future development.

Chiral-at-Ruthenium Catalysts for Nitrene-Mediated Asymmetric C-H Functionalizations

ConspectusAsymmetric transition metal catalysis is an indispensable tool used both in academia and industry for forging chiral molecules in an enantioselective fashion. Its advancement relies in large part on the design and discovery of new chiral catalysts. In contrast to conventional endeavors of generating chiral transition metal catalysts from carefully tailored chiral ligands, the development of chiral transition metal catalysts containing solely achiral ligands (chiral-at-metal catalysts) has been neglected. This Account presents our recent work on the synthesis and catalytic applications of a new class of C₂-symmetric chiral-at-ruthenium catalysts. These octahedral ruthenium(II) complexes are constructed from two achiral bidentate N-(2-pyridyl)-substituted N-heterocyclic carbene (PyNHC) ligands and two monodentate acetonitriles, and the dicationic complexes are typically complemented with two hexafluorophosphate anions. The chirality of these complexes originates from the helical cis-arrangement of the bidentate ligands, thereby generating a stereogenic metal center as the exclusive stereocenter in these complexes. The strong σ donor and π acceptor properties of the PyNHC ligands provide a strong ligand field that ensures a high constitutional and configurational inertness of the helical Ru(PyNHC)₂ core, while at the same time, the trans-effect exerted by the σ-donating NHC ligands results in high lability of the MeCN ligands and, therefore, provides high catalytic activity. As a result, this chiral-at-ruthenium catalyst scaffold combines formidable structural robustness with high catalytic activity in a unique fashion. Asymmetric nitrene C-H insertion constitutes an efficient strategy for accessing chiral amines. The direct conversion of C(sp³)-H bonds into amine functionality circumvents the need for using functionalized starting materials. Our C₂-symmetric chiral-at-ruthenium complexes display exceptionally high catalytic activity and excellent stereocontrol for various asymmetric nitrene C(sp³)-H insertion reactions. The ruthenium nitrene species can be generated from nitrene precursors, such as organic azides and hydroxylamine derivatives, which undergo ring-closing C-H aminations to afford chiral cyclic pyrrolidines, ureas, and carbamates in high yields and with excellent enantioselectivities at low catalyst loadings. Mechanistically, the turnover-determining C-H insertion is proposed to proceed in a concerted or stepwise fashion, depending on the nature of intermediate ruthenium nitrenes (singlet or triplet). Computational studies revealed that the stereocontrol originates from a better steric fit in combination with favorable catalyst/substrate π-π stacking effects for aminations at benzylic C-H bonds. In addition, we also present our research for exploring novel reaction patterns and reactivities of intermediate transition metal nitrenes. First, we discovered a novel chiral-at-ruthenium-catalyzed 1,3-migratory nitrene C(sp³)-H insertion to convert azanyl esters into nonracemic α-amino acids. Second, we found a chiral-at-ruthenium-catalyzed intramolecular C(sp³)-H oxygenation, thereby allowing for the construction of chiral cyclic carbonates and lactones via nitrene chemistry. We expect that our research program on catalyst development and reaction discovery will inspire the creation of novel types of chiral-at-metal catalysts and drive the development of new applications for nitrene-mediated asymmetric C-H functionalization reactions.

Discovery of a simple iron catalyst reveals the intimate steps of C-H amination to form C-N bonds

Formation of ubiquitous C-N bonds traditionally uses prefunctionalized carbon precursors. Recently, metal-catalyzed amination of unfunctionalized C-H bonds with azides has become an attractive and atom-economic strategy for C-N bond formation, though all catalysts contain sophisticated ligands. Here, we report Fe(HMDS)₂ (HMDS = N(SiMe₃)₂ ^-) as an easy-to-prepare catalyst for intramolecular C-H amination. The catalyst shows unprecedented turnover frequencies (110 h^-1 vs. 70 h^-1 reported to date) and requires no additives. Amination is successful for benzylic and aliphatic C-H bonds (>80% yield) and occurs even at room temperature. The simplicity of the catalyst enabled for the first time comprehensive mechanistic investigations. Kinetic, stoichiometric, and computational studies unveiled the intimate steps of the C-H amination process, including the resting state of the catalyst and turnover-limiting N₂ loss of the coordinated azide. The high reactivity of the iron imido intermediate is rationalized by its complex spin system revealing imidyl and nitrene character.

Diheme cytochromes: Effect of mixed-axial ligation on the electronic structure and electrochemical properties with cobalt porphyrin dimer

A series of six-coordinate diCo(III) porphyrin dimers, as synthetic analogues of diheme cytochromes, have been reported here having bis(imidazole), bis(pyridine) and mixed thiophenolate-pyridine/imidazole axial ligands. In the X-ray structures of bis(imidazole) and bis(pyridine) complexes, the axial ligands are in perpendicular orientation while they are parallelly oriented in their monomeric analog. The porphyrin rings are also highly ruffle-distorted in dimer but planar in monomer which reflect the effect of intramolecular interaction between two Co(porphyrin) units in dimers. In the X-ray structure of diCo(III) thiophenolate-pyridine mixed-ligated complex, the axial Co-S and Co-N(py) distances are 2.256(1) and 2.063(2) Å, respectively. The Co-N(py) distance of 2.063(2) Å is much longer than the distances of 1.961(3) and 1.972(3) Å observed in bis(pyridine) complex and the Co-S distance is larger than Co-N(py) in the mixed ligated complex which results in a displacement of Co by 0.15 Å towards the pyridine ligand from the mean porphyrin plane. Indeed, this is the first X-ray structure of a metalloporphyrin with mixed thiophenolate-pyridine axial ligands. The effect of mixed-axial ligation is demonstrated by a blue-shift of the Soret band in the UV-visible spectroscopy and also a positive shift of the Co(III)/Co(II) redox couple as compared to their bis(pyridine) analogue. The redox potentials are shifted to a large negative value just upon replacing the metal from iron to cobalt. The present investigation emphasizes the role of axial ligation, metal ions, and also the effect of heme-heme interaction in controlling the spectral and electrochemical properties.

From the bottle: simple iron salts for the efficient synthesis of pyrrolidines via catalytic C-H bond amination

Commercially available iron salts FeX₂ are remarkably active catalysts for pyrrolidine formation from organic azides via direct C-H bond amination. With FeI₂, amination is fast and selective, (<30 min for 80% yield at 2 mol% loading), TONs up to 370 are reached with just 0.1 mol% catalyst, different functional groups are tolerated, and a variety of C-H bonds were activated.

Chiral Iron Porphyrins Catalyze Enantioselective Intramolecular C(sp3 )-H Bond Amination Upon Visible-Light Irradiation

Iron-catalyzed asymmetric amination of C(sp³ )-H bonds is appealing for synthetic applications due to the biocompatibility and high earth abundance of iron, but examples of such reactions are sparse. Herein we describe chiral iron complexes of meso- and β-substituted-porphyrins that can catalyze asymmetric intramolecular C(sp³ )-H amination of aryl and arylsulfonyl azides to afford chiral indolines (29 examples) and benzofused cyclic sulfonamides (17 examples), respectively, with up to 93 % ee (yield: up to 99 %) using 410 nm light under mild conditions. Mechanistic studies, including DFT calculations, for the reactions of arylsulfonyl azides reveal that the Fe(NSO₂ Ar) intermediate generated in situ under photochemical conditions reacts with the C(sp³ )-H bond through a stepwise hydrogen atom transfer/radical rebound mechanism, with enantioselectivity arising from cooperative noncovalent interactions between the Fe(NSO₂ Ar) unit and the peripheral substituents of the chiral porphyrin scaffold.

Transition-Metal-Catalyzed Denitrogenative Annulation to Access High-Valued N-Heterocycles

Over the past few years, the development of efficient methods to construct high-valued N-heterocyclic molecules have received massive attention owing to their extensive application in the areas of medicinal chemistry, drug discovery, natural product synthesis and so on. To access those high-valued N-heterocycles, many methods have been developed. In this context, transition-metal-catalyzed denitrogenative annulation of 1,2,3-triazoles and 1,2,3,4-tetrazoles has appeared as a powerful synthetic tool because it offers a step- and atom-economical route for the preparation of the nitrogen-rich molecules. Compared with the denitrogenative annulation of various 1,2,3-triazole frameworks, annulation of 1,2,3,4-tetrazole remains more challenging due to the inertness of the tetrazole moiety. This Review summarizes the significant achievements made in the field of denitrogenative annulation of various 1,2,3-triazoles and 1,2,3,4-tetrazoles including some pioneering examples in this area of research. We anticipate that this denitrogenative annulation reaction will find broad applications in the pharmaceutical industry, drug discovery and other fields of medicinal chemistry.

Biocatalytic Intramolecular C-H aminations via Engineered Heme Proteins: Full Reaction Pathways and Axial Ligand Effects

Engineered heme protein biocatalysts provide an efficient and sustainable approach to develop amine-containing compounds through C-H amination. A quantum chemical study to reveal the complete heme catalyzed intramolecular C-H amination pathway and protein axial ligand effect was reported, using reactions of an experimentally used arylsulfonylazide with hemes containing L=none, SH^- , MeO^- , and MeOH to simulate no axial ligand, negatively charged Cys and Ser ligands, and a neutral ligand for comparison. Nitrene formation was found as the overall rate-determining step (RDS) and the catalyst with Ser ligand has the best reactivity, consistent with experimental reports. Both RDS and non-RDS (nitrene transfer) transition states follow the barrier trend of MeO^- <SH^- <MeOH<None due to the charge donation capability of the axial ligand to influence the key charge transfer process as the electronic driving forces. Results also provide new ideas for future biocatalyst design with enhanced reactivities.

An iron(ii)-based metalloradical system for intramolecular amination of C(sp2)-H and C(sp3)-H bonds: synthetic applications and mechanistic studies

A catalytic system for intramolecular C(sp2)-H and C(sp3)-H amination of substituted tetrazolopyridines has been successfully developed. The amination reactions are developed using an iron-porphyrin based catalytic system. It has been demonstrated that the same iron-porphyrin based catalytic system efficiently activates both the C(sp2)-H and C(sp3)-H bonds of the tetrazole as well as azide-featuring substrates with a high level of regioselectivity. The method exhibited an excellent functional group tolerance. The method affords three different classes of high-value N-heterocyclic scaffolds. A number of important late-stage C-H aminations have been performed to access important classes of molecules. Detailed studies (experimental and computational) showed that both the C(sp2)-H and C(sp3)-H amination reactions involve a metalloradical activation mechanism, which is different from the previously reported electro-cyclization mechanism. Collectively, this study reports the discovery of a new class of metalloradical activation modes using a base metal catalyst that should find wide application in the context of medicinal chemistry, drug discovery and industrial applications.

Transition Metal Catalysis Controlled by Hydrogen Bonding in the Second Coordination Sphere

Transition metal catalysis is of utmost importance for the development of sustainable processes in academia and industry. The activity and selectivity of metal complexes are typically the result of the interplay between ligand and metal properties. As the ligand can be chemically altered, a large research focus has been on ligand development. More recently, it has been recognized that further control over activity and selectivity can be achieved by using the "second coordination sphere", which can be seen as the region beyond the direct coordination sphere of the metal center. Hydrogen bonds appear to be very useful interactions in this context as they typically have sufficient strength and directionality to exert control of the second coordination sphere, yet hydrogen bonds are typically very dynamic, allowing fast turnover. In this review we have highlighted several key features of hydrogen bonding interactions and have summarized the use of hydrogen bonding to program the second coordination sphere. Such control can be achieved by bridging two ligands that are coordinated to a metal center to effectively lead to supramolecular bidentate ligands. In addition, hydrogen bonding can be used to preorganize a substrate that is coordinated to the metal center. Both strategies lead to catalysts with superior properties in a variety of metal catalyzed transformations, including (asymmetric) hydrogenation, hydroformylation, C-H activation, oxidation, radical-type transformations, and photochemical reactions.

A Combined Spectroscopic and Computational Study on the Mechanism of Iron-Catalyzed Aminofunctionalization of Olefins Using Hydroxylamine Derived N-O Reagent as the "Amino" Source and "Oxidant"

Herein, we study the mechanism of iron-catalyzed direct synthesis of unprotected aminoethers from olefins by a hydroxyl amine derived reagent using a wide range of analytical and spectroscopic techniques (Mössbauer, Electron Paramagnetic Resonance, Ultra-Violet Visible Spectroscopy, X-ray Absorption, Nuclear Resonance Vibrational Spectroscopy, and resonance Raman) along with high-level quantum chemical calculations. The hydroxyl amine derived triflic acid salt acts as the “oxidant” as well as “amino” group donor. It activates the high-spin Fe(II) (S_t = 2) catalyst [Fe(acac)₂(H₂O)₂] (1) to generate a high-spin (S_t = 5/2) intermediate (Int I), which decays to a second intermediate (Int II) with S_t = 2. The analysis of spectroscopic and computational data leads to the formulation of Int I as [Fe(III)(acac)₂-N-acyloxy] (an alkyl-peroxo-Fe(III) analogue). Furthermore, Int II is formed by N–O bond homolysis. However, it does not generate a high-valent Fe(IV)(NH) species (a Fe(IV)(O) analogue), but instead a high-spin Fe(III) center which is strongly antiferromagnetically coupled (J = −524 cm^–1) to an iminyl radical, [Fe(III)(acac)₂-NH·], giving S_t = 2. Though Fe(NH) complexes as isoelectronic surrogates to Fe(O) functionalities are known, detection of a high-spin Fe(III)-N-acyloxy intermediate (Int I), which undergoes N–O bond cleavage to generate the active iron–nitrogen intermediate (Int II), is unprecedented. Relative to Fe(IV)(O) centers, Int II features a weak elongated Fe–N bond which, together with the unpaired electron density along the Fe–N bond vector, helps to rationalize its propensity for N-transfer reactions onto styrenyl olefins, resulting in the overall formation of aminoethers. This study thus demonstrates the potential of utilizing the iron-coordinated nitrogen-centered radicals as powerful reactive intermediates in catalysis.

Catalytic Synthesis of 1H-2-Benzoxocins: Cobalt(III)-Carbene Radical Approach to 8-Membered Heterocyclic Enol Ethers

The metallo-radical activation of ortho-allylcarbonyl-aryl N-arylsulfonylhydrazones with the paramagnetic cobalt(II) porphyrin catalyst [CoII(TPP)] (TPP = tetraphenylporphyrin) provides an efficient and powerful method for the synthesis of novel 8-membered heterocyclic enol ethers. The synthetic protocol is versatile and practical and enables the synthesis of a wide range of unique 1H-2-benzoxocins in high yields. The catalytic cyclization reactions proceed with excellent chemoselectivities, have a high functional group tolerance, and provide several opportunities for the synthesis of new bioactive compounds. The reactions are shown to proceed via cobalt(III)-carbene radical intermediates, which are involved in intramolecular hydrogen transfer (HAT) from the allylic position to the carbene radical, followed by a near-barrierless radical rebound step in the coordination sphere of cobalt. The proposed mechanism is supported by experimental observations, density functional theory (DFT) calculations, and spin trapping experiments.

An Iron-Mesoionic Carbene Complex for Catalytic Intramolecular C-H Amination Utilizing Organic Azides

The synthesis of N-heterocycles is of paramount importance for the pharmaceutical industry. They are often synthesized through atom economic and environmentally unfriendly methods, generating significant waste. A less explored, but greener, alternative is the synthesis through the direct intramolecular C-H amination utilizing organic azides. Few examples exist by using this method, but many are limited due to the required use of stoichiometric amounts of Boc₂O. Herein, we report a homoleptic C,O-chelating mesoionic carbene-iron complex, which is the first iron-based complex that does not require the addition of any protecting groups for this transformation and that is active also in strong donor solvents such as THF or even DMSO. The achieved turnover number is an order of magnitude higher than any other reported catalytic system. A variety of C-H bonds were activated, including benzylic, primary, secondary, and tertiary. By following the reaction over time, we determined the presence of an initiation period. Kinetic studies showed a first-order dependence on substrate concentration and half-order dependence on catalyst concentration. Intermolecular competition reactions with deuterated substrate showed no KIE, while separate reactions with deuterium-labeled substrate resulted in a KIE of 2.0. Moreover, utilizing deuterated substrate significantly decreased the initiation period of the catalysis. Preliminary mechanistic studies suggest a unique mechanism involving a dimeric iron species as the catalyst resting state.

Tin(II)-Nitrene Radical Complexes Formed by Electron Transfer from Redox-Active Ligand to Organic Azides and Their Reactivity in C(sp3)-H Activation

A tin(II) complex coordinated by a sterically demanding o-phenylenediamido ligand is synthesized. The ligand is redox-active to reach a tin(II) complex with the diiminobenzosemiquinone radial anion in the oxidation by AgPF₆. The tin(II) complex reacts with a series of nosylazides (x-NO₂C₆H₄-SO₂-N₃; x = o, m, or p) at -30 °C to yield the corresponding nitrene radical bound tin(II) complexes. The nitrene radical complexes exhibit C(sp³)-H activation and amination reactivity.

Ligand-Enabled, Copper-Catalyzed Electrophilic Amination for the Asymmetric Synthesis of β-Amino Acids

Catalytic asymmetric nitrene transfer has emerged as a reliable method for the synthesis of nitrogen-containing chiral compounds. Herein, we report the copper-catalyzed intramolecular asymmetric electrophilic amination of aromatic rings. The reactive intermediate is a copper-alkyl nitrene generated from isoxazolidin-5-ones. Copper catalysis promotes three classes of asymmetric transformations, namely, asymmetric desymmetrization, parallel kinetic resolution, and kinetic resolution, expanding the repertoire of alkyl nitrene transfer and providing various cyclic and linear β-amino acids in their enantioenriched forms.

Chiral bis(pyrazolyl)methane copper(I) complexes and their application in nitrene transfer reactions

In this study, chiral bis(pyrazolyl)methane copper(I) acetonitrile complexes were applied to generate two novel terminal copper tosyl nitrene complexes with the nitrene generating agent SPhINTs in dichloromethane at low temperatures. The syntheses of the chiral bis(pyrazolyl)methane ligands are based on pulegone and camphor, members of the natural chiral pool. The chiral copper(I) acetonitrile complexes were applied as catalysts in the copper nitrene mediated aziridination reaction of different styrene derivatives and the C–H amination of various substrates. The reactions afforded good yields, but low enantiomeric excess under mild conditions. The nitrene species have been characterized with UV/Vis and EPR spectroscopy and the products of the decay by ESI mass spectrometry.

A soluble iron(II)-phthalocyanine-catalyzed intramolecular C(sp3)-H amination with alkyl azides

Herein, we describe a soluble iron(II)-phthalocyanine, [Fe^II(^tBu₄Pc)(py)₂] (Pc = phthalocyaninato(2-)), as an effective catalyst in intramolecular C(sp³)-H bond amination, with alkyl azides as the nitrogen source, to afford the amination products in moderate to excellent yields with a broad substrate scope.

Asymmetric Synthesis of Enantiopure Pyrrolidines by C(sp3 )-H Amination of Hydrocarbons

The asymmetric synthesis of enantiopure pyrrolidines is reported via a streamlined strategy relying on two sequential C-H functionalizations of simple hydrocarbons. The first step is a regio- and stereoselective catalytic nitrene C-H insertion. Then, a subsequent diastereoselective cyclization involving a 1,5-hydrogen atom transfer (HAT) from a N-centered radical leads to the formation of pyrrolidines that can then be converted to their free NH-derivatives.

Theoretical studies on iron-catalyzed azaindoline formation: mechanism and site-selectivity

The mechanism and site-selectivity for Fe-catalyzed azaindoline formation from 1,2,3,4-tetrazole were examined computationally. The H-atom abstraction/radical rebound stepwise mechanism is proposed. The aliphatic H-atom abstraction (HAA) vs. electrophilic aromatic substitution (EAS) steps are responsible for the sp³vs. sp² C-H amination site-selectivity and a larger steric congestion disfavors sp² EAS, thus resulting in Fe-catalyzed site-selectivity toward sp³ C-H amination.

Controlling Radical-Type Single-Electron Elementary Steps in Catalysis with Redox-Active Ligands and Substrates

Advances in (spectroscopic) characterization of the unusual electronic structures of open-shell cobalt complexes bearing redox-active ligands, combined with detailed mapping of their reactivity, have uncovered several new catalytic radical-type protocols that make efficient use of the synergistic properties of redox-active ligands, redox-active substrates, and the metal to which they coordinate. In this perspective, we discuss the tools available to study, induce, and control catalytic radical-type reactions with redox-active ligands and/or substrates, contemplating recent developments in the field, including some noteworthy tools, methods, and reactions developed in our own group. The main topics covered are (i) tools to characterize redox-active ligands; (ii) novel synthetic applications of catalytic reactions that make use of redox-active carbene and nitrene substrates at open-shell cobalt-porphyrins; (iii) development of catalytic reactions that take advantage of purely ligand- and substrate-based redox processes, coupled to cobalt-centered spin-changing events in a synergistic manner; and (iv) utilization of redox-active ligands to influence the spin state of the metal. Redox-active ligands have emerged as useful tools to generate and control reactive metal-coordinated radicals, which give access to new synthetic methodologies and intricate (electronic) structures, some of which are yet to be exposed.

Revisiting the Electronic Structure of Cobalt Porphyrin Nitrene and Carbene Radicals with NEVPT2-CASSCF Calculations: Doublet versus Quartet Ground States

Cobalt porphyrin complexes are established catalysts for carbene and nitrene radical group-transfer reactions. The key carbene and mono- and bisnitrene radical complexes coordinated to [Co(TPP)] (TPP = tetraphenylporphyrin) have previously been investigated with a variety of experimental techniques and supporting (single-reference) density functional theory (DFT) calculations that indicated doublet (S = 1/2) ground states for all three species. In this contribution, we revisit their electronic structures with multireference N-electron valence state perturbation theory (NEVPT2)-complete-active-space self-consistent-field (CASSCF) calculations to investigate possible multireference contributions to the ground-state wave functions. The carbene ([CoIII(TPP)(•CHCO2Et)]) and mononitrene ([CoIII(TPP)(•NNs)]) radical complexes were confirmed to have uncomplicated doublet ground states, although a higher carbene or nitrene radical character and a lower Co-C/N bond order was found in the NEVPT2-CASSCF calculations. Supported by electron paramagnetic resonance analysis and spin counting, paramagnetic molar susceptibility determination, and NEVPT2-CASSCF calculations, we report that the cobalt porphyrin bisnitrene complex ([CoIII(TPP•)(•NNs)2]) has a quartet (S = 3/2) spin ground state, with a thermally accesible multireference and multideterminant "broken-symmetry" doublet spin excited state. A spin flip on the porphyrin-centered unpaired electron allows for interconversion between the quartet and broken-symmetry doublet spin states, with an approximate 10-fold higher Boltzmann population of the quartet at room temperature.

Computational insights into Ir(iii)-catalyzed allylic C-H amination of terminal alkenes: mechanism, regioselectivity, and catalytic activity

Computational studies on Ir(iii)-catalyzed intermolecular branch-selective allylic C–H amination of terminal olefins with methyl dioxazolone have been carried out to investigate the mechanism, including the origins of regioselectivity and catalytic activity difference. The result suggests that the reaction proceeds through generation of active species, alkene coordination, allylic C–H activation, decarboxylation, migratory insertion, and protodemetalation. The presence of AgNTf₂ could thermodynamically promote the formation of catalytically active species [Cp*Ir(OAc)]⁺. Both the weaker Ir–C(internal) bond and the closer interatomic distance of N⋯C(internal) in the key allyl-Ir(v)-nitrenoid intermediate make the migratory insertion into Ir–C(internal) bond easier than into the Ir–C(terminal) bond, leading to branch-selective allylic C–H amidation. The high energy barrier for allylic C–H activation in the Co system could account for the observed sluggishness, which is mainly ascribed to the weaker coordination capacity of alkenes to the triplet Cp*Co(OAc)⁺ and the deficient metal⋯H interaction to assist hydrogen transfer.

DFT studies on Ir(iii)-catalyzed branch-selective allylic C–H amination of terminal olefins with methyl dioxazolone have been carried out to investigate the mechanism, including the origins of regioselectivity and catalytic activity difference.

Metal-ligand cooperative transformation of alkyl azide to isocyanate occurring at a Co-Si moiety

A cobalt-silyl moiety reveals metal-ligand cooperative group transfer to generate isocyanate from the reaction of alkyl azide and CO. This reaction involves the reversible insertion of a nitrene group into a Co-Si bond. Photolysis leads to ligand substitution of a Co(CO)₂ species, allowing the successful catalytic conversion of AdN₃ to AdNCO under CO(g).

Doubly Strapped Redox-Switchable 5,10,15,20-Tetraaryl-5,15-diazaporphyrinoids: Promising Platforms for the Evaluation of Paratropic and Diatropic Ring-Current Effects

This paper presents a novel series of chemically stable and redox-switchable 20π, 19π, and 18π 5,10,15,20-tetraaryl-5,15-diazaporphyrinoids (TADAPs) that have two alkyl-chain straps above and below the diazaporphyrin ring. Three types of doubly strapped TADAPs were prepared as nickel(II) complexes using meso-N-(2,6-dihydroxyphenyl)-substituted TADAP and the corresponding aliphatic diacids as precursors. Theoretical calculations revealed that regardless of their oxidation states, all strapped TADAPs had essentially flat π-planes. It was found that the alkyl-chain straps slightly affected the optical and electrochemical properties of the DAP rings, particularly in the oxidized forms. ¹H NMR spectroscopy was used to evaluate the antiaromatic character of the 20π TADAPs and the aromatic character of the 18π TADAP dications, and it was observed that they displayed paratropic and diatropic ring-current effects, respectively, on the chemical shifts of methylene protons in the spatially separated alkyl chains. The degree of shielding and deshielding depended on the position of the methylene units; it decreased with increase in separation from the π-plane and central axis of the porphyrin ring. The NMR experiments also revealed that the degree of the diatropic ring currents was clearly related to the π-electron density of the porphyrin ring; the ring-current effects decreased as the charge increased from 0 to +2. These findings are also qualitatively supported by the nucleus-independent chemical shifts.

Ruthenium Pybox-Catalyzed Enantioselective Intramolecular C-H Amination of Sulfamoyl Azides en Route to Chiral Vicinal Diamines

Enantioselective C(sp³)-H aminations allow an efficient access to nonracemic chiral amines. This work reports the catalytic asymmetric synthesis of chiral 1,2,5-thiadiazolidine-1,1-dioxides by an enantioselective ring-closing 1,5-C-H amination of sulfamoyl azides. The reaction is catalyzed by a recently introduced simple chiral ruthenium bis(oxazoline) (pybox) complex ( Angew. Chem. Int. Ed. 2020, 59, 12395) and provides cyclic 5-membered sulfamide products in up to 98% yield and up to 98% ee if the C-H bond is in a benzylic position. Mechanistic experiments support a stepwise mechanism in which an intermediate ruthenium nitrenoid species initiates a 1,5-hydrogen atom transfer followed by an immediate radical rebound. The cyclic sulfamide products are suitable intermediates for the synthesis of chiral vicinal diamines as has been verified for a representative example.

O-Benzoylhydroxylamines as Alkyl Nitrene Precursors: Synthesis of Saturated N-Heterocycles from Primary Amines

We introduce O-benzoylhydroxylamines as competent alkyl nitrene precursors. The combination of readily available, stable substrates and a proficient rhodium catalyst provides a straightforward means for the construction of various pyrrolidine rings from the corresponding primary amines. Preliminary mechanistic investigation suggests that the structure of the nitrene precursor plays a role in determining the nature of the resulting reactive intermediate.

Catalytic Synthesis of 8-Membered Ring Compounds via Cobalt(III)-Carbene Radicals

The metalloradical activation of o-aryl aldehydes with tosylhydrazide and a cobalt(II) porphyrin catalyst produces cobalt(III)-carbene radical intermediates, providing a new and powerful strategy for the synthesis of medium-sized ring structures. Herein we make use of the intrinsic radical-type reactivity of cobalt(III)-carbene radical intermediates in the [CoII (TPP)]-catalyzed (TPP=tetraphenylporphyrin) synthesis of two types of 8-membered ring compounds; novel dibenzocyclooctenes and unprecedented monobenzocyclooctadienes. The method was successfully applied to afford a variety of 8-membered ring compounds in good yields and with excellent substituent tolerance. Density functional theory (DFT) calculations and experimental results suggest that the reactions proceed via hydrogen atom transfer from the bis-allylic/benzallylic C-H bond to the carbene radical, followed by two divergent processes for ring-closure to the two different types of 8-membered ring products. While the dibenzocyclooctenes are most likely formed by dissociation of o-quinodimethanes (o-QDMs) which undergo a non-catalyzed 8π-cyclization, DFT calculations suggest that ring-closure to the monobenzocyclooctadienes involves a radical-rebound step in the coordination sphere of cobalt. The latter mechanism implies that unprecedented enantioselective ring-closure reactions to chiral monobenzocyclooctadienes should be possible, as was confirmed for reactions mediated by a chiral cobalt-porphyrin catalyst.

Electronically Asynchronous Transition States for C–N Bond Formation by Electrophilic [CoIII(TAML)]-Nitrene Radical Complexes Involving Substrate-to-Ligand Single-Electron Transfer and a Cobalt-Centered Spin Shuttle

The oxidation state of the redox noninnocent tetra-amido macrocyclic ligand (TAML) scaffold was recently shown to affect the formation of nitrene radical species on cobalt(III) upon reaction with PhI=NNs [van LeestN. P.; J. Am. Chem. Soc.2020, 142, 552−56331846578]. For the neutral [Co^III(TAML^sq)] complex, this leads to the doublet (S = 1/2) mono-nitrene radical species [Co^III(TAML^q)(N^•Ns)(Y)] (bearing an unidentified sixth ligand Y in at least the frozen state), while a triplet (S = 1) bis-nitrene radical species [Co^III(TAML^q)(N^•Ns)₂]^– is generated from the anionic [Co^III(TAML^red)]^– complex. The one-electron-reduced Fischer-type nitrene radicals (N^•Ns^–) are formed through single (mono-nitrene) or double (bis-nitrene) ligand-to-substrate single-electron transfer (SET). In this work, we describe the reactivity and mechanisms of these nitrene radical complexes in catalytic aziridination. We report that [Co^III(TAML^sq)] and [Co^III(TAML^red)]^– are both effective catalysts for chemoselective (C=C versus C–H bonds) and diastereoselective aziridination of styrene derivatives, cyclohexane, and 1-hexene under mild and even aerobic (for [Co^III(TAML^red)]^–) conditions. Experimental (Hammett plots; [Co^III(TAML)]-nitrene radical formation and quantification under catalytic conditions; single-turnover experiments; and tests regarding catalyst decomposition, radical inhibition, and radical trapping) in combination with computational (density functional theory (DFT), N-electron valence state perturbation theory corrected complete active space self-consistent field (NEVPT2-CASSCF)) studies reveal that [Co^III(TAML^q)(N^•Ns)(Y)], [Co^III(TAML^q)(N^•Ns)₂]^–, and [Co^III(TAML^sq)(N^•Ns)]^– are key electrophilic intermediates in aziridination reactions. Surprisingly, the electrophilic one-electron-reduced Fischer-type nitrene radicals do not react as would be expected for nitrene radicals (i.e., via radical addition and radical rebound). Instead, nitrene transfer proceeds through unusual electronically asynchronous transition states, in which the (partial) styrene substrate to TAML ligand (single-) electron transfer precedes C–N coupling. The actual C–N bond formation processes are best described as involving a nucleophilic attack of the nitrene (radical) lone pair at the thus (partially) formed styrene radical cation. These processes are coupled to TAML-to-cobalt and cobalt-to-nitrene single-electron transfer, effectively leading to the formation of an amido-γ-benzyl radical (NsN^––CH₂–^•CH–Ph) bound to an intermediate spin (S = 1) cobalt(III) center. Hence, the TAML moiety can be regarded to act as a transient electron acceptor, the cobalt center behaves as a spin shuttle, and the nitrene radical acts as a nucleophile. Such a mechanism was hitherto unknown for cobalt-catalyzed hypovalent group transfer and the more general transition-metal-catalyzed nitrene transfer to alkenes but is now shown to complement the known concerted and stepwise mechanisms for N-group transfer.

Mechanism-Guided Design and Discovery of Efficient Cytochrome P450-Derived C-H Amination Biocatalysts

Cytochromes P450 have been recently identified as a promising class of biocatalysts for mediating C-H aminations via nitrene transfer, a valuable transformation for forging new C-N bonds. The catalytic efficiency of P450s in these non-native transformations is however significantly inferior to that exhibited by these enzymes in their native monooxygenase function. Using a mechanism-guided strategy, we report here the rational design of a series of P450_BM3-based variants with dramatically enhanced C-H amination activity acquired through disruption of the native proton relay network and other highly conserved structural elements within this class of enzymes. This approach further guided the identification of XplA and BezE, two "atypical" natural P450s implicated in the degradation of a man-made explosive and in benzastatins biosynthesis, respectively, as very efficient C-H aminases. Both XplA and BezE could be engineered to further improve their C-H amination reactivity, which demonstrates their evolvability for abiological reactions. These engineered and natural P450 catalysts can promote the intramolecular C-H amination of arylsulfonyl azides with over 10 000-14 000 catalytic turnovers, ranking among the most efficient nitrene transfer biocatalysts reported to date. Mechanistic and structure-reactivity studies provide insights into the origin of the C-H amination reactivity enhancement and highlight the divergent structural requirements inherent to supporting C-H amination versus C-H monooxygenation reactivity within this class of enzymes. Overall, this work provides new promising scaffolds for the development of nitrene transferases and demonstrates the value of mechanism-driven rational design as a strategy for improving the catalytic efficiency of metalloenzymes in the context of abiological transformations.

The first crystallographically characterised ruthenium(vi) alkylimido porphyrin competent for aerobic epoxidation and hydrogen atom abstraction

The syntheses of [Ru^VI(Por)(NAd)(O)] and [Ru^VI(2,6-F₂-TPP)(NAd)₂] have been described. [Ru^VI(2,6-F₂-TPP)(NAd)(O)] capable of catalysing aerobic epoxidation of alkenes has been characterised by X-ray crystallography with Ru[double bond, length as m-dash]NAd and Ru[double bond, length as m-dash]O bond distances being 1.778(5) Å and 1.760(4) Å (∠O-Ru-NAd: 174.37(19)°), respectively. Its first reduction potential is 740 mV cathodically shifted from that of [Ru^VI(2,6-F₂-TPP)(O)₂].

Iron porphyrin catalysed light driven C-H bond amination and alkene aziridination with organic azides

Visible light driven nitrene transfer and insertion reactions of organic azides are an attractive strategy for the design of C-N bond formation reactions under mild reaction conditions, the challenge being lack of selectivity as a free nitrene reactive intermediate is usually involved. Herein is described an iron(iii) porphyrin catalysed sp³ C-H amination and alkene aziridination with selectivity by using organic azides as the nitrogen source under blue LED light (469 nm) irradiation. The photochemical reactions display chemo- and regio-selectivity and are effective for the late-stage functionalization of natural and bioactive compounds with complexity. Mechanistic studies revealed that iron porphyrin plays a dual role as a photosensitizer and as a catalyst giving rise to a reactive iron-nitrene intermediate for subsequent C-N bond formation.

Intramolecular Csp3-H/C-C bond amination of alkyl azides for the selective synthesis of cyclic imines and tertiary amines

The intramolecular Csp³–H and/or C–C bond amination is very important in modern organic synthesis due to its efficiency in the construction of diversified N-heterocycles. Herein, we report a novel intramolecular cyclization of alkyl azides for the synthesis of cyclic imines and tertiary amines through selective Csp³–H and/or C–C bond cleavage. Two C–N single bonds or a C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> N double bond are efficiently constructed in these transformations. The carbocation mechanism differs from the reported metal nitrene intermediates and therefore enables metal-free and new transformation.

A novel intramolecular cyclization of alkyl azides for the synthesis of cyclic imines and tertiary amines has been developed. The aliphatic C–H or C–C bond was selectively cleaved with the efficient formation of two C–N single bonds or a CN double bond.