Simultaneous Visualization and Quantitation of Multiple Steroid Hormones Based on Signal-Amplified Biosensing with Duplex Molecular Recognition

A portable paper-based aptasensor for simultaneous visual detection of two mycotoxins in corn flour using dual-color upconversion nanoparticles and Cu-TCPP nanosheets

A portable paper-based microfluidic aptasensor is established to simultaneously and visually detect zearalenone (ZEN) and ochratoxin A (OTA). The targets at the sample zone can migrate to two detection zones through dual-channels and result in green and blue fluorescence recovery. This is due to the specific recognition by a respective aptamer that destroys fluorescence resonance energy transfer (FRET) from dual-color upconversion nanoparticles (UCNPs) to Cu-TCPP nanosheets. By capturing fluorescent images and analyzing the corresponding RGB value via a smartphone, ZEN and OTA can be analyzed with limits of detection down to 0.44 ng/mL and 0.098 ng/mL in the linear ranges of 0.5-100 ng/mL and 0.1-50 ng/mL, respectively. Satisfactory recoveries are also obtained for ZEN (94.5-103.7 %) and OTA (92.2-106.8 %) in corn flour. With the advantages of simple operation, low sample consumption, and broad adaptability, this promising platform allows for the on-site detection of multiple hazards in food.

Highly Retentive, Anti-Interference, and Covert Individual Marking Taggant with Exceptional Skin Penetration

The development of high-performance individual marking taggants is of great significance. However, the interaction between taggant and skin is not fully understood, and a standard for marking taggants has yet to be realized. To achieve a highly retentive, anti-interference, and covert individual marking fluorescent taggant, Mn²⁺ -doped NaYF₄ :Yb/Er upconversion nanoparticles (UCNPs), are surface-functionalized with polyethyleneimine (PEI) to remarkably enhance the interaction between the amino groups and skin, and thus to facilitate the surface adhesion and chemical penetration of the taggant. Electrostatic interaction between PEI₆₀₀ -UCNPs and skin as well as remarkable penetration inside the epidermis is responsible for excellent taggant retention capability, even while faced with robust washing, vigorous wiping, and rubbing for more than 100 cycles. Good anti-interference capability and reliable marking performance in real cases are ensured by an intrinsic upconversion characteristic with a distinct red luminescent emission under 980 nm excitation. The present methodology is expected to shed light on the design of high-performance individual marking taggants from the perspective of the underlying interaction between taggant and skin, and to help advance the use of fluorescent taggants for practical application, such as special character tracking.

CRISPR-Cas12a-mediated luminescence resonance energy transfer aptasensing platform for deoxynivalenol using gold nanoparticle-decorated Ti3C2Tx MXene as the enhanced quencher

Deoxynivalenol (DON) is a typical mycotoxin in cereals and poses tremendous threats to the ecological environment and public health. Therefore, exploiting sensitive and robust analytical methods for DON is particularly important. Here, we fabricated a CRISPR-Cas12a-mediated luminescence resonance energy transfer (LRET) aptasensor to detect DON by using single-stranded DNA modified upconversion nanoparticles (ssDNA-UCNPs) as anti-interference luminescence labels and gold nanoparticle-decorated Ti₃C₂T_x MXene nanosheets (MXene-Au) as enhanced quenchers. The DON aptamer can activate the trans-cleavage activity of Cas12a to indiscriminately cut nearby ssDNA-UCNPs into small fragments, which prevents ssDNA-UCNPs from adsorbing onto MXene-Au, and the upconversion luminescence (UCL) remains. Upon the binding of the aptamer with DON, the trans-cleavage activity of Cas12a was suppressed, and the ssDNA-UCNPs were not cleaved and easily adsorbed onto MXene-Au, which caused UCL quenching. Under optimized conditions, the limit of detection was determined to be 0.64 ng/mL with a linear range of 1 - 500 ng/mL. In addition, the sensor was successfully applied to detect DON in corn flour and Tai Lake water with recoveries of 96.2 - 105% and 95.2 - 104%, respectively. This platform achieves a sensitive and specific analysis of DON and greatly broadens the detection range of CRISPR-Cas sensors for non-nucleic acids hazards in the environment and food.

Multiplexed Identification of Bacterial Biofilm Infections Based on Machine-Learning-Aided Lanthanide Encoding

Pathogenic biofilms are up to 1000-fold more drug-resistant than planktonic pathogens and cause about 80% of all chronic infections worldwide. The lack of prompt and reliable biofilm identification methods seriously prohibits the diagnosis and treatment of biofilm infections. Here, we developed a machine-learning-aided cocktail assay for prompt and reliable biofilm detection. Lanthanide nanoparticles with different emissions, surface charges, and hydrophilicity are formulated into the cocktail kits. The lanthanide nanoparticles in the cocktail kits can offer competitive interactions with the biofilm and further maximize the charge and hydrophilicity differences between biofilms. The physicochemical heterogeneities of biofilms were transformed into luminescence intensity at different wavelengths by the cocktail kits. The luminescence signals were used as learning data to train the random forest algorithm, and the algorithm could identify the unknown biofilms within minutes after training. Electrostatic attractions and hydrophobic-hydrophobic interactions were demonstrated to dominate the binding of the cocktail kits to the biofilms. By rationally designing the charge and hydrophilicity of the cocktail kit, unknown biofilms of pathogenic clinical isolates were identified with an overall accuracy of over 80% based on the random forest algorithm. Moreover, the antibiotic-loaded cocktail nanoprobes efficiently eradicated biofilms since the nanoprobes could penetrate deep into the biofilms. This work can serve as a reliable technique for the diagnosis of biofilm infections and it can also provide instructions for the design of multiplex assays for detecting biochemical compounds beyond biofilms.

Engineering DNA on the Surface of Upconversion Nanoparticles for Bioanalysis and Therapeutics

Surface modification of inorganic nanomaterials with biomolecules has enabled the development of composites integrated with extensive properties. Lanthanide ion-doped upconversion nanoparticles (UCNPs) are one class of inorganic nanomaterials showing optical properties that convert photons of lower energy into higher energy. Additionally, DNA oligonucleotides have exhibited powerful capabilities for organizing various nanomaterials with versatile topological configurations. Through rational design and nanotechnology, DNA-based UCNPs offer predesigned functionality and potential. To fully harness the capabilities of UCNPs integrated with DNA, various DNA-UCNP composites have been developed for diagnosis and therapeutics. In this review, beginning with the introduction of the UCNPs and the conjugation of DNA strands on the surface of UCNPs, we present an overview of the recent progress of DNA-UCNP composites while focusing on their applications for bioanalysis and therapeutics.

Multi-mode optical coded patterns enabled by upconversion nanoparticles and photonic crystals

In this study, we designed the luminescent enhanced composites by combining upconversion nanoparticles (UCNPs) and photonic crystals (PCs), and prepared multi-mode coding patterns through utilizing the optical properties of both materials, respectively. We prepared UCNPs with different luminescence and the composite materials can be quickly obtained by spin-coating the UCNPs on the surface of the PCs. We discover that the composite materials have significant luminescent enhancement and the enhancement of upconversion is attributed to the Bragg reflection of the photonic band gap. We fabricated upconversion luminescent lattices based on the surface of the PCs by dropping and endowed with the meaning of the Morse code so that it can have more information in different modes. In addition, we further obtained the cipher table pattern according to the structural color of the PCs and the luminescence of the UCNPs. The results reveal great potential applications in the field of multi-mode optical imaging and anti-counterfeiting.

One-Pot SELEX: Identification of Specific Aptamers against Diverse Steroid Targets in One Selection

Aptamers are well-established biorecognition molecules used in a wide variety of applications for the detection of their respective targets. However, individual SELEX processes typically performed for the identification of aptamers for each target can be quite time-consuming, labor-intensive, and costly. An alternative strategy is proposed herein for the simultaneous identification of different aptamers binding distinct but structurally similar targets in one single selection. This one-pot SELEX approach, using the steroids estradiol, progesterone, and testosterone as model targets, was achieved by combining the benefits of counter-SELEX with the power of next-generation sequencing and bioinformatics analysis. The pools from the last stage of the selection were compared in order to discover sequences with preferential abundance in only one of the pools. This led to the identification of aptamer candidates with potential specificity to a single steroid target. Binding studies demonstrated the high affinity of each selected aptamer for its respective target, and low nanomolar range dissociation constants calculated were similar to those previously reported for steroid-binding aptamers selected using traditional SELEX approaches. Finally, the selected aptamers were exploited in microtiter plate assays, achieving nanomolar limits of detection, while the specificity of these aptamers was also demonstrated. Overall, the one-pot SELEX strategy led to the discovery of aptamers for three different steroid targets in one single selection without compromising their affinity or specificity, demonstrating the power of this approach of aptamer discovery for the simultaneous selection of aptamers against multiple targets.

Highly Sensitive Detection of Bladder Cancer-Related miRNA in Urine Using Time-Gated Luminescent Biochip

Detection of biomarkers in complex samples is a significant health plan strategy for medical diagnosis, therapy monitoring, and health management. However, high background noise resulting from impurities and other analytes in complex samples has hampered the improvement of detection sensitivity and accuracy. Herein, an ultralow background biochip based on time-gated luminescent probes supported by photonic crystals (PCs) was successfully developed for detection of bladder cancer (BC)-related miRNA biomarkers with high sensitivity and specificity in urine samples. Coupled with the time-gated luminescence of long-lifetime luminescence probes and the luminescence-enhanced capability of PCs, the short-lived autofluorescence can be efficiently removed; thus, the detection sensitivity will be significantly improved. Benefiting from these merits, a detection limit of 26.3 fM is achieved. Furthermore, the biochip exhibits excellent performance in urinary miRNA detection, and good recoveries are also obtained. The developed biochip possesses unique properties of ultralow background and luminescence enhancement, thus offering a suitable tool for the detection of BC-related miRNA in urine. With rational design of probe sequences, the biochip holds great potential for many other biomarkers in real patient samples, making it valuable in areas such as medical diagnosis and disease evaluation.

Emerging Biomimetic Applications of DNA Nanotechnology

Re-engineering cellular components and biological processes has received great interest and promised compelling advantages in applications ranging from basic cell biology to biomedicine. With the advent of DNA nanotechnology, the programmable self-assembly ability makes DNA an appealing candidate for rational design of artificial components with different structures and functions. This Forum Article summarizes recent developments of DNA nanotechnology in mimicking the structures and functions of existing cellular components. We highlight key successes in the achievements of DNA-based biomimetic membrane proteins and discuss the assembly behavior of these artificial proteins. Then, we focus on the construction of higher-order structures by DNA nanotechnology to recreate cell-like structures. Finally, we explore the current challenges and speculate on future directions of DNA nanotechnology in biomimetics.