Mechanistic Insights on the Reduction of CO2 to Silylformates Catalyzed by Ir-NSiN Species

Recent Advances on the Chemistry of Transition Metal Complexes with Monoanionic Bidentate Silyl Ligands

The chemistry of transition-metal (TM) complexes with monoanionic bidentate (κ2-L,Si) silyl ligands has considerably grown in recent years. This work summarizes the advances in the chemistry of TM-(κ2-L,Si) complexes (L=N-heterocycle, phosphine, N-heterocyclic carbene, thioether, ester, silylether or tetrylene). The most common synthetic method has been the oxidative addition of the Si-H bond to the metal center assisted by the coordination of L. The metal silicon bond distances in TM-(κ2-L,Si) complexes are in the range of metal-silyl bond distances. TM-(κ2-L,Si) complexes have proven to be effective catalysts for hydrosilylation and/or hydrogenation of unsaturated molecules among other processes.

Mechanism Insights into the Iridium(III)- and B(C6F5)3-Catalyzed Reduction of CO2 to the Formaldehyde Level with Tertiary Silanes

The catalytic system [Ir(CF3CO2)(κ2-NSiMe)2] [1; NSiMe = (4-methylpyridin-2-yloxy)dimethylsilyl]/B(C6F5)3 promotes the selective reduction of CO2 with tertiary silanes to the corresponding bis(silyl)acetal. Stoichiometric and catalytic studies evidenced that species [Ir(CF3COO-B(C6F5)3)(κ2-NSiMe)2] (3), [Ir(κ2-NSiMe)2][HB(C6F5)3] (4), and [Ir(HCOO-B(C6F5)3)(κ2-NSiMe)2] (5) are intermediates of the catalytic process. The structure of 3 has been determined by X-ray diffraction methods. Theoretical calculations show that the rate-limiting step for the 1/B(C6F5)3-catalyzed hydrosilylation of CO2 to bis(silyl)acetal is a boron-promoted Si-H bond cleavage via an iridium silylacetal borane adduct.

Molecular Structures of the Silicon Pyridine-2-(thi)olates Me3Si(pyX), Me2Si(pyX)2 and Ph2Si(pyX)2 (py = 2-Pyridyl, X = O, S), and Their Intra- and Intermolecular Ligand Exchange in Solution

A series of pyridine-2-olates (pyO) and pyridine-2-thiolates (pyS) of silicon was studied in solid state and in solution. The crystal structures of Me3Si(pyO) (1a), Me3Si(pyS) (1b), Me2Si(pyO)2 (2a), Me2Si(pyS)2 (2b), Ph2Si(pyO)2 (3a) and Ph2Si(pyS)2 (3b) were determined by X-ray diffraction. For that purpose, crystals of the (at room temperature) liquid compounds 1a and 1b were grown in a capillary on the diffractometer. Compounds 1a, 1b, 2a, 2b and 3a feature tetracoordinate silicon atoms in the solid state, whereas 3b gave rise to a series of four crystal structures in which the Si atoms of this compound are hexacoordinate. Two isomers (3b1 with all-cis arrangement of the C2N2S2 donor atoms in P, and 3b2 with trans S-Si-S axis in P21/n) formed individual crystal batches, which allowed for their individual 29Si NMR spectroscopic study in the solid state (the determination of their chemical shift anisotropy tensors). Furthermore, the structures of a less stable modification of 3b2 (in C2/c) as well as a toluene solvate 3b2×(toluene) (in P) were determined. In CDCl3, the equimolar solutions of the corresponding pairs of pyO and pyS compounds (2a/2b and 3a/3b) showed substituent scrambling with the formation of the products Me2Si(pyO)(pyS) (2c) and Ph2Si(pyO)(pyS) (3c), respectively, as minor components in the respective substituent exchange equilibrium.

Origin of the Ir-Si bond shortening in Ir-NSiN complexes

The Ir-Si bond distances reported for Ir-(fac-κ3-NSiNOPy) and Ir-(fac-κ3-NSiN4MeOPy) species (NSiNOPy = bis(pyridine-2-yloxy)methylsilyl and NSiN4MeOPy = bis(4-methyl-pyridine-2-yloxy)methylsily) are in the range of 2.220-2.235 Å. These values are in the lowest limit of the Ir-Si bond distances found in the Cambridge Structural Database (CSD). To understand the origin of such remarkable shortening, a computational study of the bonding situation of representative examples of Ir-(fac-κ3-NSiN) species has been carried out. It is found that the Ir-Si bond can be described as an electron-sharing (i.e. covalent) bond. Despite that, this bond is highly polarized and as a result, the contribution of the electrostatic attractions to the bonding is rather significant. Indeed, there exists a linear relationship (R2 = 0.97) between the Ir-Si bond distance and the extent of the computed electrostatic interactions, which indicates that the ionic contribution to the bonding is mainly responsible for the observed Ir-Si bond shortening.

Ruthenium-Catalyzed Coupling Reactions of CO2 with C2 H4 and Hydrosilanes towards Silyl Esters

A series of in situ-prepared catalytic systems incorporating Ru^II precursors and bidentate phosphine ligands has been probed in the reductive carboxylation of ethylene in the presence of triethylsilane as reductant. The catalytic production of propionate and acrylate silyl esters was evidenced by high-throughput screening (HTS) and implemented in batch reactor techniques. The most promising catalyst systems identified were made of Ru(H)(Cl)(CO)(PPh₃ )₃ and 1,4-bis(dicyclohexylphosphino)butane (DCPB) or 1,1'-ferrocene-diyl-bis(cyclohexylphosphine) (DCPF). A marked influence of water on the acrylate/propionate selectivity was noted. Turnover numbers [mol mol(Ru)^-1 ] up to 16 for acrylate and up to 68 for propionate were reached under relatively mild conditions (20 bar, 100 °C, 0.5 mol % Ru, 40 mol % H₂ O vs. HSiEt₃ ). Possible mechanisms are discussed.

Hydrosilyation of CO2 using a silatrane hydride: structural characterization of a silyl formate compound

The silatrane hydride compound, [N(CH2CH2O)3]SiH, reacts with CO2 in the presence of the [tris(2-pyridylthio)methyl]zinc hydride complex, [Tptm]ZnH, to afford the silyl formate and methoxide derivatives, [N(CH2CH2O)3]SiO2CH and [N(CH2CH2O)3]SiOCH3. The molecular structure of [N(CH2CH2O)3]SiO2CH has been determined by X-ray diffraction, thereby demonstrating that the formate ligand adopts a distal conformation in which the uncoordinated oxygen atom resides with a trans-like disposition relative to silicon. Density functional theory calculations indicate that the atrane motif of [N(CH2CH2O)3]SiO2CH is flexible, such that the energy of the molecule changes relatively little as the Si···N distance varies over the range 2.0–3.0 Å.

A Resin-Supported Formate Catalyst for the Transformative Reduction of Carbon Dioxide with Hydrosilanes

A heterogeneous formate anion catalyst for the transformative reduction of carbon dioxide (CO₂ ) based on a polystyrene and divinylbenzene copolymer modified with alkylammonium formate was prepared from a widely available anion exchange resin. The catalyst preparation was easy and the characterization was carried out by using elemental analysis, Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and solid-state ¹³ C cross-polarization/magic-angle spinning nuclear magnetic resonance (¹³ C CP/MAS NMR) spectroscopy. The catalyst displayed good catalytic activity for the direct reduction of CO₂ with hydrosilanes, tunably yielding silylformate or methoxysilane products depending on the hydrosilanes used. The catalyst was also active for the reductive insertion of CO₂ into both primary and secondary amines. The catalytic activity of the resin-supported formate can be predicted from the FTIR spectra of the catalyst, probably because of the difference in the ionic interaction strength between the supported alkylammonium cations and formate anions. The ion pair density is thought to influence the catalytic activity, as shown by the elemental and solid-state ¹³ C NMR analyses.

Unprecedent formation of methylsilylcarbonates from iridium-catalyzed reduction of CO2 with hydrosilanes

The iridium complex [Ir(μ-CF₃SO₃)(κ²-NSi^Me2)₂]₂ (3) (NSi^Me2 = {4-methylpyridine-2-yloxy}dimethylsilyl) has been prepared by reaction of [Ir(μ-Cl)(κ²-NSi^Me2)₂]₂ (1) with two equivalents of AgCF₃SO₃. The solid structure of 3 evidenced its dinuclear nature, being a rare example of an iridium species with triflate groups acting as bridges. The 3-catalyzed reduction of CO₂ with HSiMe(OSiMe₃)₂ affords a mixture of the corresponding silylformate and methoxysilane together with the silylcarbonate CH₃OCO₂SiMe(OSiMe₃)₂ (4a). This is the first time that the formation of silylcarbonates has been observed from the catalytic reduction of CO₂ with silanes. Analogous behaviour has been observed when HSiMe₂Ph and HSiMePh₂ were used as reductants.

The formation of methylsilylcarbonates from the iridium-catalyzed hydrosilylation of CO₂ has been observed for the first time.

Diverse Catalytic Systems and Mechanistic Pathways for Hydrosilylative Reduction of CO2

Catalytic hydrosilylation of carbon dioxide has emerged as a promising approach for carbon dioxide utilization. It allows the reductive transformation of carbon dioxide into value-added products at the levels of formate, formaldehyde, methanol, and methane. Tremendous progress has been made in the area of carbon dioxide hydrosilylation since the first reports in 1981. This focus review describes recent advances in the design and catalytic performance of leading catalyst systems, including transition-metal, main-group, and transition-metal/main-group and main-group/main-group tandem catalysts. Emphasis is placed on discussions of key mechanistic features of these systems and efforts towards the development of more selective, efficient, and sustainable carbon dioxide hydrosilylation processes.

Selective reduction of formamides to O-silylated hemiaminals or methylamines with HSiMe2Ph catalyzed by iridium complexes

The reaction of (4-methyl-pyridin-2-iloxy)ditertbutylsilane (NSitBu-H, 1) with [IrCl(coe)2]2 affords the iridium(iii) complex [Ir(H)(Cl)(κ2-NSitBu)(coe)] (2), which has been fully characterized including X-ray diffraction studies. The reaction of 2 with AgCF3SO3 leads to the formation of species [Ir(H)(CF3SO3)(κ2-NSitBu)(coe)] (3). The iridium complexes 2 and 3 are effective catalysts for the reduction of formamides with HSiMe2Ph. The selectivity of the reduction process depends on the catalyst. Thus, by using complex 2, with a chloride ancillary ligand, it has been possible to selectively obtain the corresponding O-silylated hemiaminal by reaction of formamides with one equivalent of HSiMe2Ph, while complex 3, with a triflate ligand instead of chloride, catalyzed the selective reduction of formamides to the corresponding methylamine.

Ir-catalyzed selective reduction of CO2 to the methoxy or formate level with HSiMe(OSiMe3)2

Ir-NSi-based catalysts allow controlling the selective reduction of CO₂ with HSiMe(OSiMe₃)₂ to afford methoxysilane or silyl formate.

(2-Pyridyloxy)silanes as Ligands in Transition Metal Coordination Chemistry

Proceeding our initial studies of compounds with formally dative TM→Si bonds (TM = Ni, Pd, Pt), which feature a paddlewheel arrangement of four (N,S) or (N,N) bridging ligands around the TM–Si axis, the current study shows that the (N,O)-bidentate ligand 2-pyridyloxy (pyO) is also capable of bridging systems with TM→Si bonds (shown for TM = Pd, Cu). Reactions of MeSi(pyO)3 with [PdCl2(NCMe)2] and CuCl afforded the compounds MeSi(µ-pyO)4PdCl (1) and MeSi(µ-pyO)3CuCl (2), respectively. In the latter case, some crystals of the Cu(II) compound MeSi(µ-pyO)4CuCl (3) were obtained as a byproduct. Analogous reactions of Si(pyO)4, in the presence of HpyO, with [PdCl2(NCMe)2] and CuCl2, afforded the compounds [(HpyO)Si(µ-pyO)4PdCl]Cl (4), (HpyO)2Si[(µ-pyO)2PdCl2]2 (5), and (HpyO)2Si[(µ-pyO)2CuCl2]2 (6), respectively. Compounds 1–6 and the starting silanes MeSi(pyO)3 and Si(pyO)4 were characterized by single-crystal X-ray diffraction analyses and, with exception of the paramagnetic compounds 3 and 6, with NMR spectroscopy. Compound 2 features a pentacoordinate Si atom, the Si atoms of the other complexes are hexacoordinate. Whereas compounds 1–4 feature a TM→Si bond each, the Si atoms of compounds 5 and 6 are situated in an O6 coordination sphere, while the TMCl2 groups are coordinated to pyridine moieties in the periphery of the molecule. The TM–Si interatomic distances in compounds 1–4 are close to the sum of the covalent radii (1 and 4) or at least significantly shorter than the sum of the van-der-Waals radii (2 and 3). The latter indicates a noticeably weaker interaction for TM = Cu. For the series 1, 2, and 3, all of which feature the Me–Si motif trans-disposed to the TM→Si bond, the dependence of the TM→Si interaction on the nature of TM (Pd(II), Cu(I), and Cu(II)) was analyzed using quantum chemical calculations, that is, the natural localized molecular orbitals (NLMO) analyses, the non-covalent interaction (NCI) descriptor, Wiberg bond order (WBO), and topological characteristics of the bond critical points using the atoms in molecules (AIM) approach.