Self-Assembled Monolayers of N-Heterocyclic Olefins on Au(111)

Self-assembled monolayers (SAMs) of N-heterocyclic olefins (NHOs) have been prepared on Au(111) and their thermal stability, adsorption geometry, and molecular order were characterized by X-ray photoelectron spectroscopy, polarized X-ray absorption spectroscopy, scanning tunneling microscopy (STM), and density functional theory (DFT) calculations. The strong σ-bond character of NHO anchoring to Au induced high geometrical flexibility that enabled a flat-lying adsorption geometry via coordination to a gold adatom. The flat-lying adsorption geometry was utilized to further increase the surface interaction of the NHO monolayer by backbone functionalization with methyl groups that induced high thermal stability and a large impact on work-function values, which outperformed that of N-heterocyclic carbenes. STM measurements, supported by DFT modeling, identified that the NHOs were self-assembled in dimers, trimers, and tetramers constructed of two, three, and four complexes of NHO-Au-adatom. This self-assembly pattern was correlated to strong NHO-Au interactions and steric hindrance between adsorbates, demonstrating the crucial influence of the carbon-metal σ-bond on monolayer properties.

Coordination-Induced Trigger for Activity: N-Heterocyclic Carbene-Decorated Ceria Catalysts Incorporating Cr and Rh with Activity Induction by Surface Adsorption Site Control

A coordination-induced trigger for catalytic activity is proposed on an N-heterocyclic carbene (NHC)-decorated ceria catalyst incorporating Cr and Rh (ICy-r-Cr_0.19Rh_0.06CeO_z). ICy-r-Cr_0.19Rh_0.06CeO_z was prepared by grafting 1,3-dicyclohexylimidazol-2-ylidene (ICy) onto H₂-reduced Cr_0.19Rh_0.06CeO_z (r-Cr_0.19Rh_0.06CeO_z) surfaces, which went on to exhibit substantial catalytic activity for the 1,4-arylation of cyclohexenone with phenylboronic acid, whereas r-Cr_0.19Rh_0.06CeO_z without ICy was inactive. FT-IR, Rh K-edge XAFS, XPS, and photoluminescence spectroscopy showed that the ICy carbene-coordinated Rh nanoclusters were the key active species. The coordination-induced trigger for catalytic activity on the ICy-bearing Rh nanoclusters could not be attributed to electronic donation from ICy to the Rh nanoclusters. DFT calculations suggested that ICy controlled the adsorption sites of the phenyl group on the Rh nanocluster to promote the C-C bond formation of the phenyl group and cyclohexenone.

Bi- and trimetallic complexes with macrocyclic xanthene-4,5-diNHC ligands

Three different types of bimetallic NHC-metal complexes were synthesized, whose NHC units are attached at the 4,5-positions of xanthene. The NHC units are in close proximity and are designed such that each carbene coordinates one ML unit, while the chelation of one metal by two NHC is not possible. Several xanthene-((NHC)ML)₂ complexes with ML = RhCl(cod), IrCl(cod), RhCl(CO)₂, IrCl(CO)₂, AuCl, AgCl, CuCl and Pd(allyl)Cl were synthesized and investigated.

Tailoring graphene-supported Ru nanoparticles by functionalization with pyrene-tagged N-heterocyclic carbenes

Controlling the reactivity and stability of graphene-supported Ru NPs by modifying their surface with pyrene-tagged N-heterocyclic carbene ligands.

Organometallic Nanoparticles Ligated by NHCs: Synthesis, Surface Chemistry and Ligand Effects

Over the last 20 years, the use of metallic nanoparticles (MNPs) in catalysis has awakened a great interest in the scientific community, mainly due to the many advantages of this kind of nanostructures in catalytic applications. MNPs exhibit the characteristic stability of heterogeneous catalysts, but with a higher active surface area than conventional metallic materials. However, despite their higher activity, MNPs present a wide variety of active sites, which makes it difficult to control their selectivity in catalytic processes. An efficient way to modulate the activity/selectivity of MNPs is the use of coordinating ligands, which transforms the MNP surface, subsequently modifying the nanoparticle catalytic properties. In relation to this, the use of N-heterocyclic carbenes (NHC) as stabilizing ligands has demonstrated to be an effective tool to modify the size, stability, solubility and catalytic reactivity of MNPs. Although NHC-stabilized MNPs can be prepared by different synthetic methods, this review is centered on those prepared by an organometallic approach. Here, an organometallic precursor is decomposed under H2 in the presence of non-stoichiometric amounts of the corresponding NHC-ligand. The resulting organometallic nanoparticles present a clean surface, which makes them perfect candidates for catalytic applications and surface studies. In short, this revision study emphasizes the great versatility of NHC ligands as MNP stabilizers, as well as their influence on catalysis.

Platinum nanoparticles stabilized by N-heterocyclic thiones. Synthesis and catalytic activity in mono- and di-hydroboration of alkynes

N-Heterocyclic Thiones (NHT) proved to be efficient ligands for the stabilization of small platinum nanoparticles (1.3-1.7 nm), synthesized by decomposition of [Pt(dba)₂], under a H₂ atmosphere, in the presence of variable sub-stoichiometric amounts of the NHT. Full characterization by means of TEM, HR-TEM, NMR, ICP, TGA and XPS have been carried out, providing information about the nature of the metal nanoparticles and the interaction of the NHT ligands to the metal surface. Importantly, DFT calculations indicate that some NHT ligands interact with the metal through the C[double bond, length as m-dash]C double bond of the imidazole fragment in addition to the sulfur atom, thus providing additional stabilization to the nanoparticles. According to XPS, TGA and ICP techniques, the surface coverage by the ligand increases by decreasing the size of the substituents on the nitrogen atom. The platinum nanoparticles have been used as catalyst in the hydroboration of alkynes. The most active system is that with a less covered surface area lacking an interaction of the ligand by means of the C[double bond, length as m-dash]C double bond. This catalyst hydroborates alkynes with excellent selectivities towards the monoborylated anti-Markovnikov product (vinyl-boronate) when one equiv. of borane is used. Very interestingly, aliphatic alkynes undergo a second hydroborylation process leading to the corresponding 1,1- and 1,2-diboroylated species with good selectivities towards the former.

N-Heterocyclic Carbenes as Reversible Exciton-Delocalizing Ligands for Photoluminescent Quantum Dots

Delocalization of excitons within semiconductor quantum dots (QDs) into states at the interface of the inorganic core and organic ligand shell by so-called "exciton-delocalizing ligands (EDLs)" is a promising strategy to enhance coupling of QD excitons with proximate molecules, ions, or other QDs. EDLs thereby enable enhanced rates of charge carrier extraction from, and transport among, QDs and dynamic colorimetric sensing. The application of reported EDLs-which bind to the QDs through thiolates or dithiocarbamates-is however limited by the irreversibility of their binding and their low oxidation potentials, which lead to a high yield of photoluminescence-quenching hole trapping on the EDL. This article describes a new class of EDLs for QDs, 1,3-dimethyl-4,5-disubstituted imidazolylidene N-heterocyclic carbenes (NHCs), where the 4,5-substituents are Me, H, or Cl. Postsynthetic ligand exchange of native oleate capping ligands for NHCs results in a bathochromic shift of the optical band gap of CdSe QDs (R = 1.17 nm) of up to 111 meV while the colloidal stability of the QDs is maintained. This shift is reversible for the MeNHC-capped and HNHC-capped QDs upon protonation of the NHC. The magnitude of exciton delocalization induced by the NHC (after scaling for surface coverage) increases with the increasing acidity of its π system, which depends on the substituent in the 4,5-positions of the imidazolylidene. The NHC-capped QDs maintain photoluminescence quantum yields of up to 4.2 ± 1.8% for shifts of the optical band gap as large as 106 meV.

Strong Metal-Adsorbate Interactions Increase the Reactivity and Decrease the Orientational Order of OH-Functionalized N-Heterocyclic Carbene Monolayers

Fundamental understanding of the correlation between the structure and reactivity of chemically addressable N-heterocyclic carbene (NHC) molecules on various surfaces is essential for the design of functional NHC-based self-assembled monolayers. In this work, we identified the ways by which the deposition of chemically addressable OH-NHCs on Au(111) or Pt(111) surfaces modified the anchoring geometry and chemical reactivity of surface-anchored NHCs. The properties of surface-anchored NHCs were probed by conducting X-ray photoelectron spectroscopy and polarized near-edge X-ray absorption fine structure measurements. While no preferred orientation was identified for OH-NHCs on Pt(111), the anchored molecules adopted a preferred flat-lying position on Au(111). Dehydrogenation and aromatization of the imidazoline ring along with partial hydroxyl oxidation were detected in OH-NHCs that were anchored on Au(111). The dehydrogenation and aromatization reactions were facilitated, along with partial decomposition, for OH-NHCs that were anchored on Pt(111). The spectroscopic results reveal that stronger metal-adsorbate interactions increase the reactivity of surface-anchored OH-NHCs while decreasing their molecular orientational order.

Novel nickel nanoparticles stabilized by imidazolium-amidinate ligands for selective hydrogenation of alkynes

Novel magnetically recoverable nickel nanoparticles (Ni NPs) stabilized by imidazolium-amidinate ligands selectively hydrogenate alkynes into (Z)-alkenes under mild conditions.

Water-soluble NHC-stabilized platinum nanoparticles as recoverable catalysts for hydrogenation in water

Aromatic compounds have been hydrogenated in water using recoverable catalysts based on water-soluble platinum nanoparticles capped with NHC ligands.

One-step synthesis and XPS investigations of chiral NHC-Au(0)/Au(i) nanoparticles

Although N-heterocyclic carbenes (NHCs) have been demonstrated as suitable ligands for the stabilisation of gold nanoparticles (AuNPs) through a variety of methods, the manner in which such AuNPs form is yet to be fully elucidated. We report a simple and fast one-step synthesis of uniform chiral (l/d)-histidin-2-ylidene stabilised gold nanoparticles using the organometallic Au(i) complex as a well defined starting material. The resulting nanoparticles have an average size of 2.35 ± 0.43 nm for the L analog whereas an average size of 2.25 ± 0.39 nm was found for the D analog. X-ray photoelectron spectroscopy analyses reveal the presence of Au(i) and Au(0) in all NHC stabilised AuNPs. In contrast, measured X-ray photoelectron spectra of dodecanethiol protected gold nanoparticles showed only the presence of a Au(0) species. This observation leads us to postulate that AuNPs synthesised from organometallic NHC-Au(i) complexes exhibit a monolayer of Au(i) surrounding a Au(0) core. This work highlights the importance of synthetic method choice for NHC-stabilized AuNPs, as this could determine Au oxidation states and resulting AuNP properties such as catalytic activities and stabilities.

Ruthenium Trichloride Catalyst in Water: Ru Colloids versus Ru Dimer Characterization Investigations

An easy-to-prepare ruthenium catalyst obtained from ruthenium(III) trichloride in water demonstrates efficient performances in the oxidation of several cycloalkanes with high selectivity toward the ketone. In this work, several physicochemical techniques were used to demonstrate the real nature of the ruthenium salt still unknown in water and to define the active species for this Csp³-H bond functionalization. From transmission electron microscopy analyses corroborated by SAXS analyses, spherical nanoobjects were observed with an average diameter of 1.75 nm, thus being in favor of the formation of reduced species. However, further investigations, based on X-ray scattering and absorption analyses, showed no evidence of the presence of a metallic Ru-Ru bond, proof of zerovalent nanoparticles, but the existence of Ru-O and Ru-Cl bonds, and thus the formation of a water-soluble complex. The EXAFS (extended X-ray absorption fine structure) spectra revealed the presence of an oxygen-bridged diruthenium complex [Ru(OH) _xCl_{3- x}]₂(μ-O) with a high oxidation state in agreement with catalytic results. This study constitutes a significant advance to determine the true nature of the RuCl₃·3H₂O salt in water and proves once again the invasive nature of the electron beam in microscopy experiments, routinely used in nanochemistry.

Organometallic Ruthenium Nanoparticles: Synthesis, Surface Chemistry, and Insights into Ligand Coordination

Although there has been for the past 20 years great interest in the synthesis and use of metal nanoparticles, little attention has been paid to the complexity of the surface of these species. In particular, the different aspects concerning the ligands present, their location, their mode of binding, and their dynamics have been little studied. Our group has started in the early 1990s an investigation of the surface coordination chemistry of ruthenium and platinum nanoparticles but at that time with a lack of adequate techniques to fulfill our ambition. Over 10 years later, we went back to this problem and could obtain a more precise vision of the surface species. This Account is centered on ruthenium chemistry. This metal has been the most studied in our group, first thanks to the availability of a precursor, Ru(cyclooctadiene)(cyclooctatriene) (Ru(COD)(COT)), which possesses the ability to decompose in very mild conditions without leaving residues on the resulting nanoparticles and second because of the absence of magnetic perturbations (Knight shift, paramagnetism, ferromagnetism, etc.), which has allowed the use of solution and solid state NMR. In this respect, it has been possible to evidence the presence of a high concentration of hydrides on the surface of these particles, to study their dynamics, and to show that since the polarity of the Ru-H bond is similar to that of the C-H bond, a Ru/H NP would behave as a big lipophilic entity. The second point was to characterize the coordination of ancillary ligands. This has been achieved for different ligands, in particular phosphines and carbenes, which made possible the study of the modification of NP reactivity induced by surface ligands. This led to the conclusion that the presence of surface ligands can benefit both the activity of NP catalysts and their selectivity. If it was expected that the selectivity could be modulated, the promoting effect from the presence of ligands on, for example, arene or CO hydrogenation was totally unexpected. Playing with poison atoms (Sn, Fe, etc.) or ligands (CO) may allow us to play with the reactivity of the NPs to make them more selective for selected reactions. Finally, the search for specific ligands for nanoparticles is still in its infancy, but some examples have been found as have specific reactions of nanoparticles. Obviously arene hydrogenation and CO hydrogenation were well-known in heterogeneous catalysis, but we could demonstrate that they can be carried out in very mild conditions on ligand stabilized RuNPs. On the other hand, the enantiospecific C-H activation leading to enantioselective labeling of large organic or biomolecules or the C-C bond cleavage in mild conditions were both unexpected. There is still much work to perform for reaching the degree of control on nanoparticles that is presently achieved in organometallic molecular chemistry, but this work shows that it is possible.

Water-soluble platinum nanoparticles stabilized by sulfonated N-heterocyclic carbenes: influence of the synthetic approach

On the surface: Pt nanoparticles with NHC ligands at the surface have been prepared in water using different organometallic approaches.

Ruthenium nanoparticles ligated by cholesterol-derived NHCs and their application in the hydrogenation of arenes

Herein we present ruthenium nanoparticles (Ru-NPs) stabilized with two rigid NHC ligands derived from cholesterol.

The role and fate of capping ligands in colloidally prepared metal nanoparticle catalysts

In this Perspective article, we highlight emerging opportunities for the rational design of catalysts upon the choice, exchange, partial removal or pyrolysis of ligands.