Tailored Design of Bicontinuous Gyroid Mesoporous Carbon and Nitrogen-Doped Carbon from Poly(ethylene oxide-b-caprolactone) Diblock Copolymers

Preparation and research progress of lignin-based supercapacitor electrode materials

The reserve of lignin in the biological world is the second largest biomass resource after cellulose. Lignin has the characteristics of wide sources, low cost, and rich active components. Due to environmental pollution and energy scarcity, lignin is often used as a substitute good for petrochemical products. Lignin-based functional materials can be prepared by chemical modification or compounding, which are widely used in the fields of energy storage, chemical industry, and medicine. Among them, lignin-based carbon materials have the features of stable chemical properties, large pH application range, ideal electrical conductivity, developed pore size, and high specific surface area, which have great application prospects as supercapacitor materials. This paper mainly introduces the structural properties of lignin, the methods, and mechanisms of carbonization, pore-making, and pore-expansion, as well as the research progress of lignin-based carbon materials for supercapacitors, while looking forward to the future research direction of lignin carbon materials.

Impact of channel nanostructures of porous carbon particles on their catalytic performance

Mesoporous carbon particles have great potential due to their unique structural properties as support materials for catalytic applications. Particle shapes and channel nanostructures of mesoporous carbon particles can determine the reactant/product transport efficiency. However, the role of the channel nanostructure in the catalytic reaction has not been much explored. Herein, we introduce a facile method to fabricate a series of porous carbon particles (PCPs) with controlled channel exposure on the carbon surface and investigate the impact of the channel nanostructure of the PCPs on the catalytic activity. By employing a membrane emulsification method with a controlled solvent evaporation rate, we fabricate block copolymer (BCP) particles with uniform size and regulated degrees of cylindrical channel exposed to the particle surface. Followed by the carbonization of the BCP particles, a low amount (1.3 wt%) of Pt is incorporated into the PCP series to investigate the impact of channel nanostructures on the catalytic oxidation reaction of o-phenylenediamine (OPD). Specifically, PCP featuring highly open channel nanostructures shows a high reaction rate constant of 0.154 mM-1 s-1 for OPD oxidation, showing 5.5 times higher catalytic activity than those of closed channel nanostructures (0.028 mM-1 s-1). This study provides a deeper understanding of the impact of channel nanostructure within mesoporous carbon particles on catalytic activity.

Multiple Carbon Morphologies Derived from Polyion Complex-Based Double Hydrophilic Block Copolymers as Templates and Phenol as a Carbon Precursor

This study demonstrates the multiple carbon morphology forming abilities of two dissimilar polyion complex (PIC)-based double hydrophilic block copolymers (DHBC) along with three different phenol concentrations when subjecting the blend in aqueous media via a hydrothermal-assisted carbonization strategy. The morphological transition from worm-like to spherical along with granular is found for the blend of oppositely charged poly(ethylene glycol) (PEG)-conjugated poly(amino acid) block copolymers, PEG-poly(l-lysine) (PEG-PLys) and PEG-poly(glutamic acid) (PEG-PGlu), along with three different concentrations of phenol. In contrast, after mixing the combination of PEG-PLys and PEG-poly(aspartic acid) (PEG-PAsp) separately with three different phenol contents, elliptical to irregular to spherical structural transition occurred. Fourier transform infrared and circular dichroism spectroscopic studies indicated that the formation of worm-like hybrid micellar structures is attributed to the presence of the β-sheet structure, whereas spherical-shaped hybrid micellar structures are formed due to the existence of α-helix and random coil structures. We discuss the mechanism for the secondary structure-induced morphology formation based on the theory related to the packing parameter, which is commonly used for analyzing the shape of the micellar structures. Secondary structures of the PIC-based DHBC system are responsible for forming multiple carbon morphologies, whereas these structures are absent in the case of the amphiphilic block copolymer (ABC) system. Furthermore, ABC-based template methods require organic solvent, ultrasonication, and a prolonged solvent evaporation process to obtain multiple carbon morphologies. Scanning electron microscopy observations suggested there is no significant morphological change even after subjecting the hybrid micelles to carbonization at elevated temperatures. Raman scattering studies revealed that the degree of graphitization and the graphitic crystallite domain size of the carbonized sample depend on the phenol content. Carbon materials exhibited the highest specific surface area of 579 m² g^-1 along with a pore volume of 0.398 cc g^-1, and this observation suggests that the prepared carbons are porous. Our findings illustrate the facile and effective strategy to fabricate the multiple carbon morphologies that can be used as potential candidates for energy storage applications.

Recent Advances in Porous Carbon Materials as Electrodes for Supercapacitors

Porous carbon materials have demonstrated exceptional performance in various energy and environment-related applications. Recently, research on supercapacitors has been steadily increasing, and porous carbon materials have emerged as the most significant electrode material for supercapacitors. Nonetheless, the high cost and potential for environmental pollution associated with the preparation process of porous carbon materials remain significant issues. This paper presents an overview of common methods for preparing porous carbon materials, including the carbon-activation method, hard-templating method, soft-templating method, sacrificial-templating method, and self-templating method. Additionally, we also review several emerging methods for the preparation of porous carbon materials, such as copolymer pyrolysis, carbohydrate self-activation, and laser scribing. We then categorise porous carbons based on their pore sizes and the presence or absence of heteroatom doping. Finally, we provide an overview of recent applications of porous carbon materials as electrodes for supercapacitors.

Block Copolymer Self-Assembly Directed Synthesis of Porous Materials with Ordered Bicontinuous Structures and Their Potential Applications

Porous materials with their ordered bicontinuous structures have attracted great interest owing to ordered periodic structures as well as 3D interconnected network and pore channels. Bicontinuous structures may favor efficient mass diffusion to the interior of materials, thus increasing the utilization ratio of active sites. In addition, ordered bicontinuous structures confer materials with exceptional optical and magnetic properties, including tunable photonic bandgap, negative refraction, and multiple equivalent magnetization configurations. The attractive structural advantages and physical properties have inspired people to develop strategies for preparing bicontinuous-structured porous materials. Among a few synthetic approaches, the self-assembly of block copolymers represents a versatile strategy to prepare various bicontinuous-structured functional materials with pore sizes and lattice parameters ranging from 1 to 500 nm. This article overviews progress in this appealing area, with an emphasis on the synthetic strategies, the structural control (including topologies, pore sizes, and unit cell parameters), and their potential applications in energy storage and conversion, metamaterials, photonic crystals, cargo delivery and release, nanoreactors, and biomolecule selection.

Templated synthesis of microparticles with carbonaceous skeletal structures using polymer cubosomes as templates

Polymer cubosomes (PCs) are bicontinuous mesoporous colloidal particles that feature high surface areas and an extremely ordered crystalline pore network. PCs have attracted tremendous attention because of their potential applications in many fields. Herein, we obtained new microparticles with carbonaceous reticulated networks via templated synthesis using PCs as templates. The water-channel networks of the PCs were translated into a carbonaceous skeletal cubic structure. Carbon precursors were polymerized inside the water-channel networks of the PCs under acidic conditions without collapsing the internal crystalline mesophases. The carbonaceous interconnected networks created by the templated synthesis exhibited cubic crystalline skeletal networks similar to those of the PCs. These cubic-ordered mesoporous carbon (cOMC) microparticles exhibited several properties in electrochemical experiments. In addition, the nanoscopic structures and surfaces of these microparticles sustain electrochemically perturbing environments, and thus retain more than 90% capacitance after 1000 charge–discharge cycles.

Polymer cubosomes can be applied as templates for various mesoporous materials. By using polymer cubosomes, we have synthesized carbonaceous microparticles, which possess crystalline internal networks and exhibit electrochemical properties.

Interfacial Assembly and Applications of Functional Mesoporous Materials

Functional mesoporous materials have gained tremendous attention due to their distinctive properties and potential applications. In recent decades, the self-assembly of micelles and framework precursors into mesostructures on the liquid-solid, liquid-liquid, and gas-liquid interface has been explored in the construction of functional mesoporous materials with diverse compositions, morphologies, mesostructures, and pore sizes. Compared with the one-phase solution synthetic approach, the introduction of a two-phase interface in the synthetic system changes self-assembly behaviors between micelles and framework species, leading to the possibility for the on-demand fabrication of unique mesoporous architectures. In addition, controlling the interfacial tension is critical to manipulate the self-assembly process for precise synthesis. In particular, recent breakthroughs based on the concept of the "monomicelles" assembly mechanism are very promising and interesting for the synthesis of functional mesoporous materials with the precise control. In this review, we highlight the synthetic strategies, principles, and interface engineering at the macroscale, microscale, and nanoscale for oriented interfacial assembly of functional mesoporous materials over the past 10 years. The potential applications in various fields, including adsorption, separation, sensors, catalysis, energy storage, solar cells, and biomedicine, are discussed. Finally, we also propose the remaining challenges, possible directions, and opportunities in this field for the future outlook.

Targeted micelles with chemotherapeutics and gene drugs to inhibit the G1/S and G2/M mitotic cycle of prostate cancer

BACKGROUND

Chemotherapy and gene therapy are used in clinical practice for the treatment of castration-resistant prostate cancer. However, the poor efficiency of drug delivery and serious systemic side effects remain an obstacle to wider application of these drugs. Herein, we report newly designed PEO-PCL micelles that were self-assembled and modified by spermine ligand, DCL ligand and TAT peptide to carry docetaxel and anti-nucleostemin siRNA.

RESULTS

The particle size of the micelles was 42 nm, the zeta potential increased from - 12.8 to 15 mV after grafting with spermine, and the optimal N/P ratio was 25:1. Cellular MTT experiments suggested that introduction of the DCL ligand resulted in high toxicity toward PSMA-positive cells and that the TAT peptide enhanced the effect. The expression of nucleostemin was significantly suppressed in vitro and in vivo, and the tumour-inhibition experiment showed that the dual-drug delivery system suppressed CRPC tumour proliferation.

CONCLUSIONS

This targeted drug delivery system inhibited the G1/S and G2/M mitotic cycle via synergistic interaction of chemotherapeutics and gene drugs.

Direct synthesis of nitrogen-doped mesoporous carbons from triazine-functionalized resol for CO2 uptake and highly efficient removal of dyes

In this study we synthesized a triazine-formaldehyde phenolic resin as a nitrogen-containing resol (N-resol) through the condensation of 2,4,6-tris(4-hydroxyphenyl)triazine and formaldehyde. We then used this N-resol as a carbon and nitrogen atom source, mixing it with a diblock copolymer of PEO-b-PCL as the soft template, for the direct synthesis of N-doped mesoporous carbons. Interestingly, the self-assembled N-resol/PEO-b-PCL blends underwent a mesophase transition from cylinder to gyroid and back again to cylinder structures upon increasing the N-resol concentration (i.e., cylinder at 50/50; gyroid at 60/40; cylinder at 70/30). After removing the soft template at 700 °C, the resultant N-doped mesoporous carbons possessed high N atom contents (up to 13 wt%) and displayed gyroid and cylinder nanostructures. The synthesized N-doped mesoporous carbons exhibited excellent CO₂ uptake capacities (up to 72 and 150 mg g^-1 at 298 and 273 K, respectively). Furthermore, the N-doped mesoporous gyroid carbon structure displayed high adsorption capacities toward organic dyes in water. The maximum adsorption capacities of rhodamine B and methylene blue in water reached as high as 204.08 and 308.64 mg g^-1, respectively; furthermore, these N-doped mesoporous carbons also maintained up to 98 % of their maximum adsorption capacities within 45 min.

High-Molecular-Weight PLA-b-PEO-b-PLA Triblock Copolymer Templated Large Mesoporous Carbons for Supercapacitors and CO2 Capture

High-molecular-weight PLA₄₄₀-b-PEO₄₅₄-b-PLA₄₄₀ (LEL) triblock copolymer was synthesized through simple ring-opening polymerization (ROP) by using the commercial homopolymer HO-PEO₄₅₄-OH as the macro-initiator. The material acted as a single template to prepare the large mesoporous carbons by using resol-type phenolic resin as a carbon source. Self-assembled structures of phenolic/LEL blends mediated by hydrogen bonding interaction were determined by FTIR and SAXS analyses. Through thermal curing and carbonization procedures, large mesoporous carbons (>50 nm) with a cylindrical structure and high surface area (>600 m²/g) were obtained because the OH units of phenolics prefer to interact with PEO block rather than PLA block, as determined by FTIR spectroscopy. Furthermore, higher CO₂ capture and good energy storage performance were observed for this large mesoporous carbon, confirming that the proposed approach provides an easy method for the preparation of large mesoporous materials.

Self-assembly of block copolymers towards mesoporous materials for energy storage and conversion systems

This paper reviews the progress in the field of block copolymer-templated mesoporous materials, including synthetic methods, morphological and pore size control and their potential applications in energy storage and conversion devices.

Mesoporous Carbons Templated by PEO-PCL Block Copolymers as Electrode Materials for Supercapacitors

In this study, samples of activated mesoporous carbon are fabricated with pore structures with cylinder and gyroid nanostructures through the templating effect of amphiphilic poly(ethylene oxide-block-caprolactone) (PEO-PCL) and by using specific resol/PEO-PCL weight ratios (e.g., 60:40 for cylinders; 55:45 for gyroids). After carbonization and KOH activation, the activated mesoporous carbons were tested as electrode materials for electric double-layer capacitor (EDLC) supercapacitors. The electrochemical properties were examined by using three-electrode (6 m KOH_(aq) as electrolyte) and CR2032 coin-cell (1 m tetraethylammonium tetrafluoroborate (TEABF₄ )/CN as the electrolyte) systems. The gyroid carbon samples provided specific capacitances higher than those of the cylinder carbon samples in both aqueous and organic systems: 155 F g^-1 compared with 135 F g^-1 in 6 m KOH_(aq) , and 105.6 compared with 96 F g^-1 in 1 m TEABF₄ /MeCN, after 100 charge/discharge cycles. It is suspected that the bi-continuous mesochannels of the gyroid-type activated mesoporous carbons provided a relatively higher effective adsorption surface area; in other words, the greater surface area for energy storage originated from a moderate pore size and an interconnected pore structure.

Flexible Epoxy Resins Formed by Blending with the Diblock Copolymer PEO-b-PCL and Using a Hydrogen-Bonding Benzoxazine as the Curing Agent

In this study, we enhanced the toughness of epoxy resin by blending it with the diblock copolymer poly(ethylene oxide⁻b⁻ε-caprolactone) (PEO-b-PCL) with a benzoxazine monomer (PA-OH) as the thermal curing agent. After thermal curing, Fourier transform infrared spectroscopy revealed that intermolecular hydrogen bonding existed between the OH units of the epoxy⁻benzoxazine copolymer and the C⁻O⁻C (C=O) units of the PEO (PCL) segment. Differential scanning calorimetry and dynamic mechanical analysis revealed that the glass transition temperature and storage modulus of the epoxy⁻benzoxazine matrix decreased significantly upon increasing the concentration of PEO-b-PCL. The Kwei equation predicted a positive value of q, consistent with intermolecular hydrogen bonding in this epoxy⁻benzoxazine/PEO-b-PCL blend system. Scanning electron microscopy revealed a wormlike structure with a high aspect ratio for PEO-b-PCL as the dispersed phase in the epoxy⁻benzoxazine matrix; this structure was responsible for the improved toughness.

Controlled synthesis of mesoporous nitrogen-doped carbons with highly ordered two-dimensional hexagonal mesostructures and their chemical activation

Ordered mesoporous nitrogen-doped carbon (OMNC) materials are considered as the most promising material for supercapacitors. In this study, a highly ordered two-dimensional (2D) hexagonal mesostructured polymer was synthesized through a facile assembly of triblock polymer micelles and phenol-melamine/formaldehyde resin via an organic-organic assembly process in aqueous solution. After calcination, the novel OMNC materials with 2D hexagonal mesostructures were obtained. By further KOH activation, the surface area and the porosity of the OMNC significantly improved, and the internal mesoporous structures were maintained. The activated OMNC-800A displayed a specific capacitance as high as 475.75 F g-1 at 0.5 A g-1 with an outstanding cycling stability (over 100% capacitance retention during 2000 cycling tests at 100 mV s-1). These results confirm that the tubular mesochannels inside the OMNC are very beneficial in providing an accessible path for diffusion of the electrolyte, thereby improving the specific capacitance of OMNC at a high current density.

Using benzoxazine chemistry and bio-based triblock copolymer to prepare functional porous polypeptide capable of efficient dye adsorption

A functional porous PTyr with phenolic OH and amide units through the selective cancelation of the PCL-b-PEO block segment from PCL-b-PEO-b-PTyrBZ triblock copolymer and used for dye adsorption.