Ligand Noninnocence in Iron Corroles: Insights from Optical and X-ray Absorption Spectroscopies and Electrochemical Redox Potentials

Unusual S=1 Four-Coordinate Fe(IV) Complexes Supported by Bisamide Ligands: Syntheses, Characterization, and Electronic Structures

The catalytic relevance of Fe(IV) species in non-heme iron catalysis has motivated synthetic advances in well-defined five- and six-coordinate Fe(IV) complexes for a better understanding of their fundamental electronic structures and reactivities. Herein, we report the syntheses of FeDipp2 and FeMes2, a pair of unusual four-coordinate non-heme formally Fe(IV) complexes with S=1 ground states supported by strongly donating bisamide ligands. By combining spectroscopic characterization and computational modeling, we found that small variations in ligand aryl substituents resulted in substantial changes in both structures and bonding. This work highlights the strong donor capabilities and modularity of the bisamide ligand set. More broadly, it is a critical contribution to the utilization of ligand design to modulate molecular geometries and electronic structures of low-coordinate, high-valent iron complexes.

Dithiophosphonate Anchored Heterometallic (Ag(I)/Fe(II)) Molecular Catalysts for Electrochemical Hydrogen Evolution Reaction

The dichalcogenide ligated molecules in catalysis to produce molecular hydrogen through electroreduction of water are rarely explored. Here, a series of heterometallic [Ag₄(S₂PFc(OR)₄] [where Fc = Fe(η⁵-C₅H₄)(η⁵-C₅H₅), R = Me, 1; Et, 2; ⁿPr, 3; ^isoAmyl, 4] clusters were synthesized and characterized by IR, absorption spectroscopy, NMR (¹H, ³¹P), and electrospray ionization mass spectrometry. The molecular structures of 1, 2, and 3 clusters were established by single-crystal X-ray crystallographic analysis. The structural elucidation shows that each triangular face of a tetrahedral silver(I) core is capped by a ferrocenyl dithiophosphonate ligand in a trimetallic triconnective (η³; μ₂, μ₁) pattern. A comparative electrocatalytic hydrogen evolution reaction of 1-5 (R = ⁱPr, 5) was studied in order to demonstrate the potential of these clusters in water splitting activity. The experimental results reveal that catalytic performance decreases with increases in the length of the carbon chain and branching within the alkoxy (-OR) group of these clusters. Catalytic durability was found effective even after 8 h of a chronoamperometric stability test along with 1500 cycles of linear sweep voltammetry performance, and only 15 mV overpotential was increased at 5 mA/cm² current density for cluster 1. A catalytic mechanism was proposed by applying density functional theory (DFT) on clusters 1 and 2 as a representative. Here, a μ₁ coordinated S-site between Ag₄ core and ligand was found a reaction center. The experimental results are also in good accordance with the DFT analysis.

The Hyperporphyrin Concept: A Contemporary Perspective

The Gouterman four-orbital model conceptualizes porphyrin UV-visible spectra as dominated by four frontier molecular orbitals-two nearly degenerate HOMOs and two exactly degenerate LUMOS under D _4h symmetry. These are well separated from all the other molecular orbitals, and normal spectra involve transitions among these MOs. Unusual spectra occur when additional orbitals appear in this energy range, typically as a consequence of the central coordinated atom. For example, metals with empty d orbitals in a suitable energy range may lead to charge transfer from porphyrin (ligand) to metal, that is, so-called LMCT transitions. Metals with filled p or d orbitals may lead to charge transfer from metal to porphyrin, MLCT transitions. These cases lead to additional peaks and/or significant redshifts in the spectra and were classified as hyperporphyrins by Gouterman. Cases in which spectra are blueshifted were classified as hypsoporphyrins; they are common for relatively electronegative late transition metal porphyrins. Many of the same principles apply to porphyrin analogues, especially corroles. In this Perspective, we focus on two newer classes of hyperporphyrins: one reflecting substituent effects in protonated or deprotonated free-base tetraphenyporphyrins and the other reflecting "noninnocent" interactions between central metal ions and corroles. Hyperporphyrin effects on spectra can be dramatic, yet they can be generated by relatively simple changes and subtle structural variations, such as acid-base reactions or the selection of a central metal ion. These concepts suggest strategies for engineering porphyrin or porphyrinoid dyes for specific applications, especially those requiring far-red or near-infrared absorption or emission.

Corroles at work: a small macrocycle for great applications

Corrole chemistry has witnessed an impressive boost in studies in the last 20 years, thanks to the possibility of preparing corrole derivatives by simple synthetic procedures. The investigation of a large number of corroles has highlighted some peculiar characteristics of these macrocycles, having features different from those of the parent porphyrins. With this progress in the elucidation of corrole properties, attention has been focused on the potential for the exploitation of corrole derivatives in different important application fields. In some areas, the potential of corroles has been studied in certain detail, for example, the use of corrole metal complexes as electrocatalysts for energy conversion. In some other areas, the field is still in its infancy, such as in the exploitation of corroles in solar cells. Herein, we report an overview of the different applications of corroles, focusing on the studies reported in the last five years.

A DMRG/CASPT2 Investigation of Metallocorroles: Quantifying Ligand Noninnocence in Archetypal 3d and 4d Element Derivatives

Hybrid density functional theory (B3LYP) and density matrix renormalization group (DMRG) theory have been used to quantitatively compare the degree of ligand noninnocence (corrole radical character) in seven archetypal metallocorroles. The seven complexes, in decreasing order of corrole noninnocent character, are Mn[Cor]Cl > Fe[Cor]Cl > Fe[Cor](NO) > Mo[Cor]Cl2 > Ru[Cor](NO) ≈ Mn[Cor]Ph ≈ Fe[Cor]Ph ≈ 0, where [Cor] refers to the unsubstituted corrolato ligand. DMRG-based second-order perturbation theory calculations have also yielded detailed excited-state energetics data on the compounds, shedding light on periodic trends involving middle transition elements. Thus, whereas the ground state of Fe[Cor](NO) (S = 0) is best described as a locally S = 1/2 {FeNO}7 unit antiferromagnetically coupled to a corrole A' radical, the calculations confirm that Ru[Cor](NO) may be described as simply {RuNO}6-Cor3-, that is, having an innocent corrole macrocycle. Furthermore, whereas the ferromagnetically coupled S = 1{FeNO}7-Cor•2- state of Fe[Cor](NO) is only ∼17.5 kcal/mol higher than the S = 0 ground state, the analogous triplet state of Ru[Cor](NO) is higher by a far larger margin (37.4 kcal/mol) relative to the ground state. In the same vein, Mo[Cor]Cl2 exhibits an adiabatic doublet-quartet gap of 36.1 kcal/mol. The large energy gaps associated with metal-ligand spin coupling in Ru[Cor](NO) and Mo[Cor]Cl2 reflect the much greater covalent character of 4d-π interactions relative to analogous interactions involving 3d orbitals. As far as excited-state energetics is concerned, DMRG-CASPT2 calculations provide moderate validation for hybrid density functional theory (B3LYP) for qualitative purposes, but underscore the possibility of large errors (>10 kcal/mol) in interstate energy differences.

Halogen Transfer to Carbon Radicals by High-Valent Iron Chloride and Iron Fluoride Corroles

High-valent iron halide corroles were examined to determine their reactivity with carbon radicals and their ability to undergo radical rebound-like processes. Beginning with Fe(Cl)(ttppc) (1) (ttppc = 5,10,15-tris(2,4,6-triphenylphenyl)corrolato^3-), the new iron corroles Fe(OTf)(ttppc) (2), Fe(OTf)(ttppc)(AgOTf) (3), and Fe(F)(ttppc) (4) were synthesized. Complexes 3 and 4 are the first iron triflate and iron fluoride corroles to be structurally characterized by single crystal X-ray diffraction. The structure of 3 reveals an Ag^I-pyrrole (η²-π) interaction. The Fe(Cl)(ttppc) and Fe(F)(ttppc) complexes undergo halogen transfer to triarylmethyl radicals, and kinetic analysis of the reaction between (p-OMe-C₆H₄)₃C• and 1 gave k = 1.34(3) × 10³ M^-1 s^-1 at 23 °C and 2.2(2) M^-1 s^-1 at -60 °C, ΔH^⧧ = +9.8(3) kcal mol^-1, and ΔS^⧧ = -14(1) cal mol^-1 K^-1 through an Eyring analysis. Complex 4 is significantly more reactive, giving k = 1.16(6) × 10⁵ M^-1 s^-1 at 23 °C. The data point to a concerted mechanism and show the trend X = F^- > Cl^- > OH^- for Fe(X)(ttppc). This study provides mechanistic insights into halogen rebound for an iron porphyrinoid complex.

The selective monobromination of a highly sterically encumbered corrole: Structural and spectroscopic properties of Fe(Cl)(2-bromo-5,10,15-tris(triphenyl)phenyl corrole)

The corrole ligand serves as a versatile tri-anionic, macrocyclic platform on which to model biological catalytic systems, as well as to effect mechanistically challenging chemical transformations. Herein we describe the synthesis, structure, and characterization of an isomerically pure corrole ligand, selectively mono-brominated at the [Formula: see text]-carbon position adjacent to the corrole C-C bond (2-C) and produced in relatively high yields, as well as its iron chloride complex. Analysis of the iron metalated complex by cyclic voltammetry shows that the bromine being present on the ligand resulted in anodic shifts of +93 and +63 mV for first oxidation and first reduction of the complex respectively. The Mössbauer spectrum of the iron metalated complex shows negligible change relative to the non-brominated analog, indicating the presence of the halide substituent predominantly effects the orbitals of the ligand rather than the metal.

Heavy-element-ligand covalence: ligand noninnocence in molybdenum and tungsten Viking-helmet Corroles

Extensive DFT calculations with several exchange-correlation functionals indicate that molybdenum-dichlorido Viking helmet corroles are noninnocent with significant Mo^IV-corrole˙^2- character. The effect is mediated by a Mo(4d)-corrole(π) orbital interaction similar to that postulated for MnCl, FeCl and FeNO corroles. The effect also appears to operate in tungsten-dichlorido corroles but is weaker relative to that for Mo. In contrast, MoO triarylcorroles do not exhibit a significant degree of corrole radical character. Furthermore, the Soret absorption maxima of a series of MoCl₂ tris(para-X-phenyl)corrole derivatives were found to redshift dramatically with increasing electron-donating character of the para substituent X, essentially clinching the case for a noninnocent macrocycle in MoCl₂ corroles.

X-ray absorption spectroscopy of exemplary platinum porphyrin and corrole derivatives: metal- versus ligand-centered oxidation

A combination of Pt L3-edge X-ray absorption spectroscopy (EXAFS and XANES) and DFT (TPSS) calculations have been performed on powder samples of the archetypal platinum porphyrinoid complexes PtII[TpCF3PP], PtIV[TpCF3PP]Cl2, and PtIV[TpCF3PC](Ar)(py), where TpCF3PP2- = meso-tetrakis(p-trifluoromethylphenyl)porphyrinato and TpCF3PC3- = meso-tris(p-trifluoromethylphenyl)corrolato. The three complexes yielded Pt L3-edge energies of 11 566.0 eV, 11 567.2 eV, and 11 567.6 eV, respectively. The 1.2 eV blueshift from the Pt(ii) to the Pt(iv) porphyrin derivative is smaller than expected for a formal two-electron oxidation of the metal center. A rationale was provided by DFT-based Hirshfeld which showed that the porphyrin ligand in the Pt(iv) complex is actually substantially oxidized relative to that in the Pt(ii) complex. The much smaller blueshift of 0.4 eV, going from PtIV[TpCF3PP]Cl2, and PtIV[TpCF3PC](Ar)(py), is ascribable to the significantly stronger ligand field in the latter compound.

Late-stage ligand functionalization via the Staudinger reaction using phosphine-appended 2,2'-bipyridine

The ability of a phosphine-appended-2,2'-bipyridine ligand ((Ph2P)2bpy) to serve as a platform for late-stage ligand modifications was evaluated using tetrahedral (Ph2P)2bpyFeCl2. We employed a post-metalation Staudinger reaction to install a series of functionalized arenes, including those containing Brønsted and Lewis acidic groups. This reaction sequence represents a versatile strategy to both tune the ligand donor properties as well as directly incorporate appended functionality.

Old Dog, New Tricks: Innocent, Five-coordinate Cyanocobalt Corroles

Three mono-CN ligated anionic cobalt A₃-triarylcorroles were synthesized and investigated as to their spectroscopic and electrochemical properties in CH₂Cl₂, pyridine (Py), and dimethyl sulfoxide (DMSO). The newly synthesized corroles provide the first examples of air-stable cobalt corroles with an anionic axial ligand and are represented as [(Ar)₃CorCo^III(CN)]^-TBA⁺, where Cor is the trivalent corrole macrocycle, Ar is p-(CN)Ph, p-(CF₃)Ph, or p-(OMe)Ph, and TBA⁺ is the tetra-n-butylammonium (TBA) cation. Multiple redox reactions are observed for each mono-CN derivative with a key feature being a more facile first oxidation and a more difficult first reduction in all three solvents as compared to all previously examined corroles with similar meso- and β-pyrrole substituents. Formation constants (log K) for conversion of the five-coordinate mono-CN complex to its six-coordinate bis-CN form ranged from 10^2.8 for Ar = p-(OMe)Ph to 10^4.7 for Ar = p-(CN)Ph in DMSO as determined by spectroscopic methodologies. The in situ generated bis-CN complexes, represented as [(Ar)₃CorCo^III(CN)₂]^2-(TBA⁺)₂, and the mixed ligand complexes, represented as [(Ar)₃CorCo^III(CN)(Py)]^-TBA⁺, were also investigated as to their electrochemical and spectroscopic properties. UV-visible spectra and electrode reactions of the synthesized mono-CN derivatives are compared with the neutral mono-DMSO cobalt corrole complexes and the in situ generated bis-CN and bis-Py complexes, and the noninnocent (or innocent) nature of each cobalt corrole system is addressed. The data demonstrate the ability of the CN^- axial ligand(s) to stabilize the high-valent forms of the metallocorrole, leading to systems with innocent macrocyclic ligands. Although a number of six-coordinate cobalt(III) corroles with N-donor ligands were characterized in the solid state, a dissociation of one axial ligand readily occurs in nonaqueous solvents, and this behavior contrasts with the high stability of the currently studied bis-CN adducts in CH₂Cl₂, pyridine, or DMSO. Linear free energy relationships were elucidated between the meso-phenyl Hammett substituent constants (Σσ) and the measured binding constants, the redox potentials, and the energy of the band positions in the mono-CN and bis-CN complexes in their neutral or singly oxidized forms, revealing highly predictable trends in the physicochemical properties of the anionic corroles.

Molecular Structure of Copper and μ-Oxodiiron Octafluorocorrole Derivatives: Insights into Ligand Noninnocence

Single-crystal X-ray structures were obtained for the copper and μ-oxodiiron complexes of 2,3,7,8,12,13,17,18-octafluoro-5,10,15-triphenylcorrole, hereafter denoted as Cu[F₈TPC] and {Fe[F₈TPC]}₂O. A comparison with the crystal structures of other undecasubstituted Cu corroles, including those with H, Ar, Br, I, and CF₃ as β-substituents, showed that the degree of saddling increases in the order: H ≲ F < Ar ≲ Br ≲ I < CF₃. In other words, Cu[F₈TPC] is marginally more saddled than β-unsubstituted Cu triarylcorroles, but substantially less saddled than Cu undecaarylcorroles, β-octabromo-meso-triarylcorroles, and β-octaiodo-meso-triarylcorroles, and far less saddled than Cu β-octakis(trifluoromethyl)-meso-triarylcorroles. As for {Fe[F₈TPC]}₂O, the moderate quality of the structure did not allow us to draw firm conclusions in regard to bond length alternations in the corrole skeleton and hence also the question of ligand noninnocence. The Fe-O bond distances, 1.712(8) and 1.724(8), however, are essentially identical to those observed for {Fe[TPFPC]}₂O, where TPFPC^3- is the trianion of 5,10,15-tris(pentafluorophenyl)corrole, suggesting that a partially noninnocent electronic structural description may be applicable for both compounds.

Protonation-Induced Hyperporphyrin Spectra of meso-Aminophenylcorroles

UV-vis spectrophotometric titrations have been carried out on meso-tris(o/m/p-aminophenyl)corrole (H₃[o/m/p-TAPC]) and meso-triphenylcorrole (H₃[TPC]) in dimethyl sulfoxide with methanesulfonic acid (MSA). Monoprotonation was found to result in hyperporphyrin spectra characterized by new, red-shifted, and intense Q bands. The effect was particularly dramatic for H₃[p-TAPC] for which the Q band red-shifted from ∼637 nm for the neutral species to 764 nm in the near-IR for H₄[p-TAPC]⁺. Upon further protonation, the Q band was found to blue-shift back to 687 nm. A simple explanation of the phenomena has been offered in terms of quinonoid resonance forms.

Infrared Spectroelectrochemistry of Iron-Nitrosyl Triarylcorroles. Implications for Ligand Noninnocence

Recent DFT calculations have suggested that iron nitrosyl triarylcorrole complexes have substantial {FeNO}⁷–corrole^•2– character. With this formulation, reduction of Fe(C)(NO) complexes, where C = triarylcorrole, should be centered on the corrole macrocycle rather than on the {FeNO}⁷ moiety. To verify this proposition, visible and infrared spectroelectrochemical studies of Fe(C)(NO) were carried out and the results were interpreted using DFT (B3LYP/STO-TZP) calculations. The first reduction of Fe(C)(NO) led to significant changes in the Soret and Q-band regions of the visible spectrum as well as to a significant downshift in the ν_NO and changes in the corrole vibrational frequencies. DFT calculations, which showed that the electron was mostly added to the corrole ligand (85%), were also able to predict the observed shifts in the ν_NO and corrole bands upon reduction. These results underscore the importance of monitoring both the corrole and nitrosyl vibrations in ascertaining the site of reduction. By contrast, the visible spectroelectrochemistry of the second reduction revealed only minor changes in the Soret band upon reduction, consistent with the reduction of the FeNO moiety.

For the reduction of FeNO moiety or corrole, infrared spectroelectrochemistry and DFT calculations were performed and experimental evidence was obtained for the noninnocence of the corrole in Fe(triphenylcorrole)(NO).

Advanced Paramagnetic Resonance Studies on Manganese and Iron Corroles with a Formal d4 Electron Count

Metallocorroles wherein the metal ion is Mn^III and formally Fe^IV are studied here using field- and frequency-domain electron paramagnetic resonance techniques. The Mn^III corrole, Mn(tpfc) (tpfc = 5,10,15-tris(pentafluorophenyl)corrole trianion), exhibits the following S = 2 zero-field splitting (zfs) parameters: D = -2.67(1) cm^-1, |E| = 0.023(5) cm^-1. This result and those for other Mn^III tetrapyrroles indicate that when D ≈ - 2.5 ± 0.5 cm^-1 for 4- or 5-coordinate and D ≈ - 3.5 ± 0.5 cm^-1 for 6-coordinate complexes, the ground state description is [Mn^III(Cor^3-)]⁰ or [Mn^III(P^2-)]⁺ (Cor = corrole, P = porphyrin). The situation for formally Fe^IV corroles is more complicated, and it has been shown that for Fe(Cor)X, when X = Ph (phenyl), the ground state is a spin triplet best described by [Fe^IV(Cor^3-)]⁺, but when X = halide, the ground state corresponds to [Fe^III(Cor^•2-)]⁺, wherein an intermediate spin (S = ³/₂) Fe^III is antiferromagnetically coupled to a corrole radical dianion (S = ¹/₂) to also give an S = 1 ground state. These two valence isomers can be distinguished by their zfs parameters, as determined here for Fe(tpc)X, X = Ph, Cl (tpc = 5,10,15-triphenylcorrole trianion). The complex with axial phenyl gives D = 21.1(2) cm^-1, while that with axial chloride gives D = 14.6(1) cm^-1. The D value for Fe(tpc)Ph is in rough agreement with the range of values reported for other Fe^IV complexes. In contrast, the D value for Fe(tpc)Cl is inconsistent with an Fe^IV description and represents a different type of iron center. Computational studies corroborate the zfs for the two types of iron corrole complexes. Thus, the zfs of metallocorroles can be diagnostic as to the electronic structure of a formally high oxidation state metallocorrole, and by extension to metalloporphyrins, although such studies have yet to be performed.

X-ray absorption spectroscopy of archetypal chromium porphyrin and corrole derivatives

A Cr K-edge XAS study of paradigmatic chromium porphyrin and corrole derivatives has been carried out, providing key data for the Cr(iv) and Cr(v) oxidation states.

Hydrogen Atom Abstraction by High-Valent Fe(OH) versus Mn(OH) Porphyrinoid Complexes: Mechanistic Insights from Experimental and Computational Studies

High-valent metal-hydroxide species have been implicated as key intermediates in hydroxylation chemistry catalyzed by heme monooxygenases such as the cytochrome P450s. However, in some classes of P450s, a bifurcation from the typical oxygen rebound pathway is observed, wherein the Fe^IV(OH)(porphyrin) species carries out a net hydrogen atom transfer reaction to form alkene metabolites. In this work, we examine the hydrogen atom transfer (HAT) reactivity of Fe^IV(OH)(ttppc) (1), ttppc = 5,10,15-tris(2,4,6-triphenyl)-phenyl corrole, toward substituted phenol derivatives. The iron hydroxide complex 1 reacts with a series of para-substituted 2,6-di-tert-butylphenol derivatives (4-X-2,6-DTBP; X = OMe, Me, Et, H, Ac), with second-order rate constants k₂ = 3.6(1)-1.21(3) × 10⁴ M^-1 s^-1 and yielding linear Hammett and Marcus plot correlations. It is concluded that the rate-determining step for O-H cleavage occurs through a concerted HAT mechanism, based on mechanistic analyses that include a KIE = 2.9(1) and DFT calculations. Comparison of the HAT reactivity of 1 to the analogous Mn complex, Mn^IV(OH)(ttppc), where only the central metal ion is different, indicates a faster HAT reaction and a steeper Hammett slope for 1. The O-H bond dissociation energy (BDE) of the M^III(HO-H) complexes were estimated from a kinetic analysis to be 85 and 89 kcal mol^-1 for Mn and Fe, respectively. These estimated BDEs are closely reproduced by DFT calculations and are discussed in the context of how they influence the overall H atom transfer reactivity.

Seven Clues to Ligand Noninnocence: The Metallocorrole Paradigm

Noninnocent ligands do not allow an unambiguous definition of the oxidation state of a coordinated atom. When coordinated, the ligands also cannot be adequately represented by a classic Lewis structure. A noninnocent system thus harbors oxidizing (holes) or reducing equivalents (electrons) that are delocalized over both the ligand and the coordinated atom. To a certain degree, that is true of all complexes, but the phenomenon is arguably most conspicuous in complexes involving ligands with extended π-systems. The electronic structures of such systems have often been mischaracterized, thereby muddying the chemical literature to the detriment of students and newcomers to the field. In recent years, we have investigated the electronic structures of several metallocorrole families, several of which have turned out to be noninnocent. Our goal here, however, is not to present a systematic account of the different classes of metallocorroles, but rather to focus on seven major tools (in a nod to A. G. Cairns-Smith's Seven Clues to the Origin of Life) that led us to recognize noninnocent behavior and subsequently to characterize the phenomenon in depth. (1) The optical probe: For a series of noninnocent meso-triarylcorrole derivatives with different para substituents X, the Soret maxima are typically exquisitely sensitive to the nature of X, red-shifting with increasing electron-donating character of the group. No such substituent sensitivity is observed for the Soret maxima of innocent triarylcorrole derivatives. (2) Quantum chemistry: Spin-unrestricted density functional theory calculations permit a simple and quick visualization of ligand noninnocence in terms of the spin density profile. Even for an S = 0 complex, the broken-symmetry method often affords a spin density profile that, its fictitious character notwithstanding, helps visualize the intramolecular spin couplings. (3) NMR and EPR spectroscopy: In principle, these two techniques afford experimental probes of the electronic spin density. (4) Structure/X-ray crystallography. Ligand noninnocence in metallocorroles is often reflected in small but distinct skeletal bond length alternations in and around the bipyrrole part of the macrocycle. In addition, for Cu and some Ag corroles, ligand noninnocence manifests itself via a strong saddling of the macrocycle. (5) Vibrational spectroscopy. Unsurprisingly, the aforementioned bond length alternations translate to structure-sensitive vibrational marker bands. (6) Electrochemistry. Noninnocent metallocorroles exhibit characteristically high reduction potentials, but caution should be exercised in turning the logic around. A high reduction potential does not necessarily signify a noninnocent metallocorrole; certain high-valent metal centers also undergo metal-centered reduction at quite high potentials. (7) X-ray absorption spectroscopy (XAS). By focusing on a given element, typically the central atom in a coordination complex, X-ray absorption near-edge spectroscopy (XANES) can provide uniquely detailed local information on oxidation and spin states, ligand field strength, and degree of centrosymmetry. For metallocorroles, some of the most clear-cut distinctions between innocent and noninnocent systems have come from the K-edge XANES of Mn and Fe corroles. For researchers faced with a new, potentially noninnocent system, the take-home message is to employ a good majority (i.e., at least four) of the above methods to arrive at a reliable conclusion vis-à-vis noninnocence.

X-ray Absorption Spectroscopy as a Probe of Ligand Noninnocence in Metallocorroles: The Case of Copper Corroles

The question of ligand noninnocence in Cu corroles has long been a topic of discussion. Presented herein is a Cu K-edge X-ray absorption spectroscopy (XAS) study, which provides a direct probe of the metal oxidation state, of three Cu corroles, Cu[TPC], Cu[Br8TPC], and Cu[(CF3)8TPC] (TPC = meso-triphenylcorrole), and the analogous Cu(II) porphyrins, Cu[TPP], Cu[Br8TPP], and Cu[(CF3)8TPP] (TPP = meso-tetraphenylporphyrin). The Cu K rising-edges of the Cu corroles were found to be about 0-1 eV upshifted relative to the analogous porphyrins, which is substantially lower than the 1-2 eV shifts typically exhibited by authentic Cu(II)/Cu(III) model complex pairs. In an unusual twist, the Cu K pre-edge regions of both the Cu corroles and the Cu porphyrins exhibit two peaks split by 0.8-1.3 eV. Based on time-dependent density functional theory calculations, the lower- and higher-energy peaks were assigned to a Cu 1s → 3d x2- y2 transition and a Cu 1s → corrole/porphyrin π* transition, respectively. From the Cu(II) porphyrins to the corresponding Cu corroles, the energy of the Cu 1s → 3d x2- y2 transition peak was found to upshift by 0.6-0.8 eV. This shift is approximately half that observed between Cu(II) to Cu(III) states for well-defined complexes. The Cu K-edge XAS spectra thus show that although the metal sites in the Cu corroles are more oxidized relative to those in their Cu(II) porphyrin analogues, they are not oxidized to the Cu(III) level, consistent with the notion of a noninnocent corrole. The relative importance of σ-donation versus corrole π-radical character is discussed.

Bis-copper(II) Complex of Triply-linked Corrole Dimer and Its Dication

Copper complexes of corroles have recently been a subject of keen interest due to their ligand non-innocent character and unique redox properties. Here we investigated bis-copper complex of a triply-linked corrole dimer that serves as a pair of divalent metal ligands but can be reduced to a pair of trivalent metal ligands. Reaction of triply-linked corrole dimer 2 with Cu(acac)₂ (acac=acetylacetonate) gave bis-copper(II) complex 2Cu as a highly planar molecule with a mean-plane deviation value of 0.020 Å, where the two copper ions were revealed to be divalent by ESR, SQUID, and XPS methods. Oxidation of 2Cu with two equivalents of AgBF₄ gave complex 3Cu, which was characterized as a bis-copper(II) complex of a dicationic triply-linked corrole dimer not as the corresponding bis-copper(III) complex. In accord with this assignment, the structural parameters around the copper ions were revealed to be quite similar for 2Cu and 3Cu. Importantly, the magnetic spin-spin interaction differs depending on the redox-state of the ligand, being weak ferromagnetic in 2Cu and antiferromagnetic in 3Cu.

Stable Platinum(IV) Corroles: Synthesis, Molecular Structure, and Room-Temperature Near-IR Phosphorescence

A series of stable Pt(IV) corrole complexes with the general formula Pt^IV[TpXPC](m/p-C₆H₄CN)(py), where TpXPC^3- is the trianion of a tris(p-X-phenyl)corrole and X = CF₃, H, and CH₃, has been synthesized, affording key physicochemical data on a rare and elusive class of metallocorroles. Single-crystal X-ray structures of two of the complexes revealed very short equatorial Pt-N distances of 1.94-1.97 Å, an axial Pt-C distance of ∼2.03 Å, and an axial Pt-N distance of ∼2.22 Å. The complexes exhibit Soret maxima at ∼430 nm, which are essentially independent of the meso-aryl para substituents, and strong Q bands with the most intense peak at 595-599 nm. The substituent-independent Soret maxima are consistent with an innocent Pt^IV-corrole^3- description for the complexes. The low reduction potentials (-1.45 ± 0.08 V vs saturated calomel reference electrode) also support a highly stable Pt(IV) ground state as opposed to a noninnocent corrole^•2- description. The reductions, however, are irreversible, which suggests that they involve concomitant cleavage of the Pt-aryl bond. Unlike Pt(IV) porphyrins, two of the complexes, Pt^IV[TpXPC](m-C₆H₄CN)(py) (X = CF₃ and CH₃), were found to exhibit room-temperature near-IR phosphorescence with emission maxima at 813 and 826 nm, respectively. The quantum yield of ∼0.3% is comparable to those observed for six-coordinate Ir(III) corroles.

Iron, iron everywhere: synthesis and characterization of iron 5,10,15-triferrocenylcorrole complexes

A new series of iron triferrocenylcorroles with three different axial ligands, NO, Cl⁻and σ-Ph, is synthesized and characterized using¹H NMR, electrochemical and spectroelectrochemical techniques in nonaqueous media.