Synergistically Active NiCo2 S4 Nanoparticles Coupled with Holey Defect Graphene Hydrogel for High-Performance Solid-State Supercapacitors

Heterostructure CoS2/MoS2 Nanosheets as a Dual-Active Electrocatalyst for the Oxygen Evolution Reaction

Cost-effective and earth-abundant oxygen evolution reaction (OER) electrocatalysts are an incredible research hotspot in numerous energy storage and conversion technology fields. Herein, CoS2/MoS2 nanosheets supported by carbon cloth as a dual-active CC@CoS2/MoS2 heterostructure electrocatalyst is prepared through a simple solvothermal method. The catalyst demonstrates admirable OER performance in 1 M KOH solution with a low overpotential of 243 mV at a current density of 10 mA cm-2 and a minor Tafel slope of 109 mV dec-1, displaying honorable stability after 1000 cyclic voltammetry (CV) cycles and long-term robustness over 60 h. Theoretical calculations further ascertain that the rate-determining step of the electrocatalytic course of the CC@CoS2/MoS2 heterostructure is the conversion *O + OH- → *OOH + e- with a lower energy barrier of 1.49 eV due to the heterojunction established by CoS2 and MoS2, which can promote the OER performance of electrocatalysts. The actual identification of the catalytic mechanism in the heterostructure is conducive to the improvement of electrocatalysis applications in the OER.

Synthesis and adsorption performance of three-dimensional gels assembled by carbon nanomaterials for heavy metal removal from water: A review

This review focuses on the removal of heavy metals from water by three-dimensional gels with carbon nanomaterials as the main building units. It highlights the fundamental knowledge, most recent advances, and future prospects of carbon nanomaterial-assembled gels (CNAGs) as effective adsorbents for heavy metals in water. Various synthesis methods of CNAGs including template-assisted, self-assembly and other methods are systematically summarized and evaluated. Adsorption performances of CNAGs to typical cationic and anionic heavy metals, especially lead, cadmium, mercury, chromium, and arsenic, are thoroughly examined and discussed in detail. These analyses bring out that composite CNAGs constructed from carbon nanomaterials with polymers or other engineered nanoparticles are the most promising adsorbents for heavy metal removal from water. Current challenges and future research directions that are critical to the applications of CNAGs in the removal of heavy metals from contaminated water are outlined at the end of the review.

S-Scheme heterojunction based on the in situ coated core–shell NiCo2S4@WS2 photocatalyst was constructed for efficient photocatalytic hydrogen evolution

A core–shell structure was formed on the surface of NCS in situ loaded with WS, and efficient photocatalytic hydrogen evolution was achieved by constructing a reasonable S-scheme heterojunction.

Preparation and application of a flower-rod-like Bi2S3/Co3O4/rGO/nickel foam supercapacitor electrode

Herein, we have prepared a new nanocomposite Bi2S3/Co3O4/rGO/Ni foam substrate electrode through hydrothermal synthesis and an annealing process.

MOF-derived ZnCo2O4@NiCo2S4@PPy core-shell nanosheets on Ni foam for high-performance supercapacitors

The ZnCo₂O₄@NiCo₂S₄@PPy core-shell nanosheets material is prepared by directly growing leaf-like ZnCo₂O₄ nanosheets derived from the metal-organic framework (MOF) on Ni foam (NiF) via chemical bath deposition and annealing methods and then combining with NiCo₂S₄ and PPy via electrodeposition methods. The special core-shell structure formed by MOF-derived ZnCo₂O₄, NiCo₂S₄ and PPy creates a bi-interface, which could significantly promote the contact between electrode and electrolyte, provide more active sites and accelerate electron/ion transfer. And the combination of these three materials also produces a strong synergistic effect, which could further improve the capacitive performance of the electrode. Therefore, the ZnCo₂O₄@NiCo₂S₄@PPy/NiF electrode exhibits the maximum areal capacitance (3.75 F cm^-2) and specific capacitance (2507.0 F g^-1) at 1 mA cm^-2 and 0.5 A g^-1, respectively. Moreover, its capacitance retention rate is still 83.2% after 5000 cycles. In addition, a coin-type hybrid supercapacitor is assembled and displays a high energy density of 44.15 Wh kg^-1 and good cycling performance.

Supercapacitor Performance of Nickel-Cobalt Sulfide Nanotubes Decorated Using Ni Co-Layered Double Hydroxide Nanosheets Grown in Situ on Ni Foam

In this study, to fabricate a non-binder electrode, we grew nickel–cobalt sulfide (NCS) nanotubes (NTs) on a Ni foam substrate using a hydrothermal method through a two-step approach, namely in situ growth and an anion-exchange reaction. This was followed by the electrodeposition of double-layered nickel-cobalt hydroxide (NCOH) over a nanotube-coated substrate to fabricate NCOH core-shell nanotubes. The final product is called NCS@NCOH herein. Structural and morphological analyses of the synthesized electrode materials were conducted via SEM and XRD. Different electrodeposition times were selected, including 10, 20, 40, and 80 s. The results indicate that the NCSNTs electrodeposited with NCOH nanosheets for 40 s have the highest specific capacitance (SC), cycling stability (2105 Fg⁻¹ at a current density of 2 Ag⁻¹), and capacitance retention (65.1% after 3,000 cycles), in comparison with those electrodeposited for 10, 20, and 80 s. Furthermore, for practical applications, a device with negative and positive electrodes made of active carbon and NCS@NCOH was fabricated, achieving a high-energy density of 23.73 Whkg⁻¹ at a power density of 400 Wkg⁻¹.

Graphitic Carbon Quantum Dots Modified Nickel Cobalt Sulfide as Cathode Materials for Alkaline Aqueous Batteries

Carbon quantum dots (CQDs) as a new class of emerging materials have gradually drawn researchers' concern in recent years. In this work, the graphitic CQDs are prepared through a scalable approach, achieving a high yield with more than 50%. The obtained CQDs are further used as structure-directing and conductive agents to synthesize novel N,S-CQDs/NiCo₂S₄ composite cathode materials, manifesting the enhanced electrochemical properties resulted from the synergistic effect of highly conductive N,S-codoped CQDs offering fast electronic transport and unique micro-/nanostructured NiCo₂S₄ microspheres with Faradaic redox characteristic contributing large capacity. Moreover, the nitrogen-doped reduced graphene oxide (N-rGO)/Fe₂O₃ composite anode materials exhibit ultrahigh specific capacity as well as significantly improved rate property and cycle performance originating from the high-capacity prism-like Fe₂O₃ hexahedrons tightly wrapped by highly conductive N-rGO. A novel alkaline aqueous battery assembled by these materials displays a specific energy (50.2 Wh kg^-1), ultrahigh specific power (9.7 kW kg^-1) and excellent cycling performance with 91.5% of capacity retention at 3 A g^-1 for 5000 cycles. The present research offers a valuable guidance for the exploitation of advanced energy storage devices by the rational design and selection of battery/capacitive composite materials.

Fabrication of 2D/2D nanosheet heterostructures of ZIF-derived Co3S4 and g-C3N4 for asymmetric supercapacitors with superior cycling stability

Asymmetric supercapacitors with superior cycling stability are achieved by designing 2D/2D nanosheet heterostructures of ZIF-derived Co₃S₄ and g-C₃N₄.

Recent Advances of Porous Graphene: Synthesis, Functionalization, and Electrochemical Applications

Graphene is a 2D sheet of sp² bonded carbon atoms and tends to aggregate together, due to the strong π-π stacking and van der Waals attraction between different layers. Its unique properties such as a high specific surface area and a fast mass transport rate are severely blocked. To address these issues, various kinds of 2D holey graphene and 3D porous graphene are either self-assembled from graphene layers or fabricated using graphene related materials such as graphene oxide and reduced graphene oxide. Porous graphene not only possesses unique pore structures, but also introduces abundant exposed edges and accelerates mass transfer. The properties and applications of these porous graphenes and their composites/hybrids have been extensively studied in recent years. Herein, recent progress and achievements in synthesis and functionalization of various 2D holey graphene and 3D porous graphene are reviewed. Of special interest, electrochemical applications of porous graphene and its hybrids in the fields of electrochemical sensing, electrocatalysis, and electrochemical energy storage, are highlighted. As the closing remarks, the challenges and opportunities for the future research of porous graphene and its composites are discussed and outlined.

Three-Dimensional Graphene-Based Composite Hydrogel Materials for Flexible Supercapacitor Electrodes

Three-dimensional (3D) graphene-based hydrogels have attracted great interest for applying in supercapcacitors electrodes, owing to their intriguing properties that combine the structural interconnectivities and the outstanding properties of graphene. However, the pristine graphene hydrogel can not satisfy the high-performance demands, especial in high specific capacitance. Consequently, novel graphene-based composite hydrogels with increased electrochemical properties have been developed. In this mini review, a brief summary of recent progress in the research of the three-dimensional graphene-based composite hydrogel for flexible supercapacitors electrodes materials is presented. The latest progress in the graphene-based composite hydrogel consisting of graphene/metal, graphene/polymer, and atoms doped graphene is discussed. Furthermore, future perspectives and challenges in graphene-based composite hydrogel for supercapacitor electrodes are also expressed.

In situ construction of dual-morphology ZnCo2O4 for high-performance asymmetric supercapacitors

In this study, the controllable preparation of ZnCo₂O₄ with different morphologies in a reaction system and the orderly weaving of these morphologies into special structures was demonstrated, which might be impossible to achieve using other methods; herein, we successfully prepared a dual-morphology ZnCo₂O₄/N-doped reduced graphene oxide/Ni foam substrate (ZNGN) electrode by ultrasonic processing, a one-step hydrothermal method and a subsequent annealing process for high-performance supercapacitors. At first, ZnCo₂O₄ nanosheet orderly formed a honeycomb structure on the surface of Ni foam (NF); this improved the redox surface area of the electrode; then, feather-like ZnCo₂O₄ was evenly distributed over the honeycomb structure, playing the role of containment and fixation to provide space for material volume expansion during charging and discharging. The electrochemical test showed that the maximum capacitance of the ZNGN electrode was 1600 F g^-1 (960C g^-1) at the current density of 1 A g^-1 in a 6 M KOH solution. Moreover, the asymmetric supercapacitor ZNGN//activated carbon (ZNGN//AC) displayed the excellent energy density of 66.1 W h kg^-1 at the power density of 701 W kg^-1. Compared with the capacitance (233.3 F g^-1 and 326.6C g^-1) when ZNGN//AC was fully activated at 4 A g^-1, there was almost no loss in capacitance after 2000 charge-discharge cycles, and a 94% capacitance retention was achieved after 5000 cycles. Thus, this excellent electrochemical property highlights the potential application of the dual-morphology ZnCo₂O₄ electrode in supercapacitors.

Agar Hydrogel Template Synthesis of Mn₃O₄ Nanoparticles through an Ion Diffusion Method Controlled by Ion Exchange Membrane and Electrochemical Performance

A novel strategy, ion diffusion method controlled by ion exchange membrane combining with agar hydrogel template, was reported for the synthesis of Mn₃O₄ nanoparticles without any oxidizing agents. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Brunauere-Emmette-Teller (BET) isotherm were carried out to characterize the structure, morphology, pore size and distribution and specific surface area of the as-prepared nanomaterials. It is shown that the morphology and size of Mn₃O₄ nanoparticles can be controlled by the concentration of agar hydrogel. All the specific capacitances of the Mn₃O₄ samples prepared with agar hydrogel template are much higher than that of Mn₃O₄ prepared without any template agent. The Mn₃O₄ sample prepared at 1.5 g L-1 of agar hydrogel solution exhibits a highest specific capacitance of 183.0 F g-1 at the current density of 0.5 A g-1, which is increased by 293% compared with that of Mn₃O₄ synthesized without any template agent. The results indicate that the ion diffusion method controlled by ion exchange membrane combining with agar hydrogel template is a convenient and effective approach for preparing inorganic nanomaterials.

Zeolitic imidazolate framework-derived Co3S4@Co(OH)2 nanoarrays as self-supported electrodes for asymmetric supercapacitors

Core–shell Co₃S₄@Co(OH)₂ nanosheet arrays with enhanced electrochemical capacitive performance were designed using a ZIF-engaged strategy.

Millerite Core-Nitrogen-Doped Carbon Hollow Shell Structure for Electrochemical Energy Storage

Nickel sulfides have drawn much attention with the benefits of a high redox activity, high electrical conductivity, low cost, and fabrication ease; however, these metal sulfides are susceptible to mechanical degradation regarding their cycling performance. Conversely, hollow carbon shells exhibit a substantial electrochemical steadiness in energy storage applications. Here, the design and development of a novel millerite core-nitrogen-doped carbon hollow shell (NiS-NC HS) structure for electrochemical energy storage is presented. The nitrogen-doped carbon hollow shell (NC HS) protects against the degradation and the millerite-core aggregation, giving rise to an excellent rate capability and stability during the electrochemical charging-discharging processes, in addition to improving the NiS-NC HS conductivity. The NiS-NC HS/18h supercapacitor electrode displays an outstanding specific capacitance of 1170.72 F g^-1 (at 0.5 A g^-1 ) and maintains 90.71% (at 6 A g^-1 ) of its initial capacitance after 4000 charge-discharge cycles, owing to the unique core-shell structure. An asymmetric-supercapacitor device using NiS-NC HS and activated-carbon electrodes exhibits a high power and energy density with a remarkable cycling stability, maintaining 89.2% of its initial capacitance after 5000 cycles.

A Zinc Cobalt Sulfide Nanosheet Array Derived from a 2D Bimetallic Metal-Organic Frameworks for High-Performance Supercapacitors

Porous ternary metal sulfide integrated electrode materials with abundant electroactive sites and redox reactions are very promising for supercapacitors. Herein, a porous zinc cobalt sulfide nanosheet array on Ni foam (Zn-Co-S/NF) was constructed by facile growth of 2D bimetallic zinc/cobalt-based metal-organic framework (Zn/Co-MOF) nanosheets with leaf-like morphology on NF, followed by additional sulfurization. The Zn-Co-S/NF nanosheet array acted directly as a supercapacitor electrode showing much better electrochemical performance (2354.3 F g^-1 and 88.6 % retention over 1000 cycles) when compared with zinc cobalt sulfide powder (355.3 F g^-1 and 75.8 % retention over 1000 cycles), which originates from good electrical conductivity and mechanical stability, abundant electroactive sites, and facilitated transportation of electrons and electrolyte ions due to the unique nanosheet array structure. An asymmetric supercapacitor (ASC) device assembled from Zn-Co-S/NF and activated carbon electrodes can deliver a highest energy density of 31.9 Wh kg^-1 and a maximum power density of 8.5 kW kg^-1 . Most importantly, this ASC also shows good cycling stability (71.0 % retention over 10000 cycles). Furthermore, a red LED can be powered by two connected ASCs, and thus as-synthesized Zn-Co-S/NF has great potential for practical applications.