Realizing the Potential of Acetylenedicarboxylate by Functionalization to Halofumarate in Zr IV Metal–Organic Frameworks

Acetate exchange mechanism on a Zr12 oxo hydroxo cluster: relevance for reshaping Zr-carboxylate coordination adaptable networks

The kinetics and mechanism of the acetate ligand exchange with free acetic acid in [Zr6O4(OH)4(O2CCH3)12]2, used as a molecular model of crosslink migration in [Zr6O4(OH)4(carboxylate)12-n(OH)n]-based coordination adaptable networks with vitrimer-like properties, has been thoroughly investigated by dynamic 1H NMR and DFT calculations. The compound maintains its C2h-symmetric Zr12 structure in CD2Cl2 and C6D6, while it splits into its Zr6 subunits in CD3OD and D2O. In the Zr12 structure, the topologically different acetates (3 chelating, 6 belt-bridging, 2 intercluster-bridging and 1 inner-face-bridging) of the Zr6 subunits behave differently in the presence of free CH3COOH: very fast exchange for the chelating (coalesced resonance at room temperature), slower exchange for the belt-bridging (line broadening upon warming), no observable exchange up to 65 °C (by EXSY NMR) for the intercluster- and inner-face-bridging. The rates of the first two exchange processes have zero-order dependence on [CH3COOH]. Variable-temperature line broadening studies yielded ΔH‡ = 15.0 ± 0.4 kcal mol-1, ΔS‡ = 8 ± 1 cal mol-1 K-1 (-30 to +25 °C range in CD2Cl2) for the chelating acetates and ΔH‡ = 22.7 ± 1.6, 22.9 ± 2.1 and 20.6 ± 1.0 kcal mol-1 and ΔS‡ = 13 ± 5, 14 ± 6 and 9 ± 3 cal mol-1 K-1, respectively (+25 to +70 °C range in C6D6), for three distinct resonances of magnetically inequivalent belt-bridging acetates. With support of DFT calculations, these results point to an operationally associative mechanism involving a rate-determining partial dissociation to monodentate acetate, followed by rapid acid coordination and proton transfer. The cluster μ3-OH ligands accelerate the exchange processes through H-bonding stabilization of the coordinatively unsaturated intermediate. The lower exchange barrier for the chelated vs. bridging acetates is associated to the release of ring strain. The results presented in this investigation may help the interpretation of carboxylate exchange phenomena in other systems and the design of new carboxylate-based materials.

Systematic Study on Zirconium Chelidamates: From a Molecular Complex to a M-HOF and a MOF

We report the synthesis and in-depth characterization of three zirconium chelidamates, a molecular complex (H₈C₂N)₂[Zr(HL)₃] (1), a porous metal-containing hydrogen-bonded organic framework (M-HOF) [Zr(H₂O)₂(HL)₂]·xH₂O (2), and a metal-organic framework (MOF) (H₈C₂N)_2-2n[Zr(H_nL)₂]·x solvent (0 ≤ n ≤ 1) (3) using chelidamic acid (H₃L, H₅C₇NO₅, 4-hydroxypyridine-2,6-dicarboxylic acid) as the ligand (H₈C₂N⁺ = dimethylammonium). High-throughput investigations of the system Zr⁴⁺/H₃L/HCl/DMF/H₂O were carried out, which resulted in highly crystalline compounds. The crystal structures of 1 and 2 were determined by single-crystal X-ray diffraction. Single-crystal three-dimensional (3D) electron diffraction and Rietveld refinements of powder X-ray diffraction (PXRD) data had to be used to elucidate the crystal structure of 3 since only very small single crystals of about 500 nm in diameter could be obtained. In all structures, chelidamate ions act as anionic palindromic pincer ligands, and in 3, a coordinative bond is additionally formed by the aryloxy group. While dense packing of the molecular complexes is found in 1, hydrogen bonding of the molecular complexes in 2 leads to a porous network that shows flexibility depending on the water content. The three-dimensional framework structure of the Zr-MOF 3 contains a mononuclear inorganic building unit (IBU), which is very uncommon in Zr-MOF chemistry. The three compounds are stable in several organic solvents, and thermal decomposition starts above 280 °C. While the hydrogen-bonded framework 2 is only porous toward water with a water uptake of almost 3.75 mol mol^-1 at p/p₀ = 0.9, 3 is porous against N₂, CO₂, methanol, ethanol, and water with a specific Brunauer-Emmett-Teller (BET) surface area of a_S,BET = 410 m² g^-1 derived from the N₂ adsorption isotherm. Stability upon water adsorption covering 10 cycles between 0.5% < p/p₀ < 90% for 3 is also demonstrated.

Enhanced sorption in an indium-acetylenedicarboxylate metal-organic framework with unexpected chains of cis-μ-OH-connected {InO6} octahedra

Single crystals of the new metal-organic framework (MOF) In-adc (HHUD-4) were obtained through the reaction of linear acetylenedicarboxylic acid (H₂adc) with In(NO₃)₃·xH₂O as a racemic conglomerate in the chiral tetragonal space groups P4₃22 and P4₁22. Fundamentally different from other MOFs with linear linkers and trans-μ-OH-connected infinite {MO₆} secondary building units as in the MIL-53-type, the linear adc^2- linker leads to the formation of cis-μ-OH connected {InO₆} polyhedra, which have otherwise only been found before for V-shaped ligands, as in CAU-10-H. A far-reaching implication of this finding is the possibility that trans-μ-OH/straight MIL-53-type MOFs will have polymorphs of CAU-10-H cis-μ-OH/helical topology and vice versa. HHUD-4 is a microporous MOF with a BET surface area of up to 940 m² g^-1 and a micropore volume of up to 0.39 cm³ g^-1. Additionally, HHUD-4 features good adsorption uptakes of 3.77 mmol g^-1 for CO₂ and 1.25 mmol g^-1 for CH₄ at 273 K and 1 bar, respectively, and a high isosteric heat of adsorption of 11.4 kJ mol^-1 for H₂ with a maximum uptake of 6.36 mmol g^-1 at 77 K and 1 bar. Vapor sorption experiments for water and volatile organic compounds (VOCs) such as benzene, cyclohexane and n-hexane yielded uptake values of 135, 269, 116 and 205 mg g^-1, respectively, at 293 K. While HHUD-4 showed unremarkable results for water uptake and low stability for water, it exhibited good stability with steep VOC uptake steps at low relative pressures and a high selectivity of 17 for benzene/cyclohexane mixtures.

Acetylenedicarboxylate as a linker in the engineering of coordination polymers and metal-organic frameworks: challenges and potential

Despite its simplicity as a short and rod-like linear linker, acetylenedicarboxylate (ADC) has for a long time been somewhat overlooked in the engineering of coordination polymers (CPs) and especially in the construction of porous metal-organic frameworks (MOFs). This situation seems to be stemming from the thermosensitivity of the free acid (H₂ADC) precursor and its dicarboxylate, which makes the synthesis of their CP- and MOF-derivatives, as well as the evacuation of guest molecules from their pores, challenging. However, an increasing number of publications dealing with the synthesis, structural characterization and properties of ADC-based CPs and MOFs, disclose ways to tackle this obstacle. In this regard, using mostly room temperature solution synthesis or mechanochemical synthesis, and very rarely solvothermal synthesis, the ADC linker has successfully been used to form one-, two-, and three-dimensional CPs with metal cations from almost all groups of the periodic table of the elements, whereby its carboxylate groups adopt mainly all types of known coordination modes. ADC-based CPs feature properties, including negative thermal expansion, formation of non-centrosymmetric networks, long-range magnetic ordering, and solid-state polymerization. The first ADC-based microporous MOFs were obtained with Ce(IV), Hf(IV) and Zr(IV), in which the presence of the -CC- triple-bond within their backbone results in high hydrophilicity, high CO₂ adsorption capacity and enthalpy, as well as the uptake of halogen vapors. This discloses the potential of ADC-MOFs for gas storage/separation and water adsorption-based applications. Furthermore, H₂ADC/ADC was discovered to undergo facile in situ hydrohalogenation to yield halogen-functionalized fumarate-based CPs/MOFs. This review surveys investigations on ADC-based coordination polymers and metal-organic frameworks, and is intended to stimulate interest on this linker in chemists working in the fields of crystal chemistry or materials science.

Metal organic framework/polyelectrolyte composites for water vapor sorption applications

Metal-organic framework (MOF) core particles of MIL-101(Cr), aluminum fumarate (Basolite® A520), MIL-53-TDC, zirconium fumarate, and UiO-66 were modified by adsorption of thin polyelectrolyte (PE)-based shells without deterioration of their crystal structure. By applying different PEs and depositing a single layer (MOF/PE) or one to three layer-by-layer assembled bilayers (MOF/LbL), the mass percent of shell material in the composite was varied from 0.6-2.5% to 50%. Under a constant relative pressure of water vapor, the moisture uptake by a MOF/PE and a MOF/LbL is rather comparable with its S-shaped curvature to that of pristine MOFs. The relevant differences, such as a shift of the ascending adsorption part to lower/higher relative pressure or an increase/decrease in water uptake in selected regions, are associated with the core-shell structure and related to the morphological changes of the MOF powders. The hydrophilic surface promotes the formation of liquid menisci at the points of contact between particles and accelerates the moisture uptake and loss. A decrease in water sorption under an atmosphere with high humidity by some composites can be associated with the inhibition of liquid water condensation by the more hydrophobic shells.

The Chemistry of Zirconium/Carboxylate Clustering Process: Acidic Conditions to Promote Carboxylate-Unsaturated Octahedral Hexamers and Pentanuclear Species

Clustering chemistry is a key point in the design and synthesis of the secondary building units that comprise metal-organic frameworks (MOFs) based on group IV metals. In this work, the first stages of the zirconium-carboxylate clustering process in alcohol/water mixtures are studied in detail using the monocarboxylic benzoic and hydroxybenzoic acids to avoid the polymerization. Mass spectroscopy measurements performed on the reactions revealed the presence of hexa- and pentanuclear species even at low pH values and also evidenced the acid-base nature and pH dependence of the transformation between both species. The control on the chemistry governing the equilibria between these species has allowed us to isolate six new compounds in the solid state. The single-crystal X-ray diffraction analysis revealed that they are closely related to the well-known [Zr₆(O)₄(OH)₄(OOC)₁₂] secondary building unit found in many MOFs by removing carboxylic ligands in the case of the hexameric species ([Zr₆(O)₄(OH)₄(OOC)₈(H₂O)₈]⁴⁺) or by additionally removing one of the metal centers in the case of the pentameric entities ([Zr₅(O)₂(OH)₆(OOC)₄(H₂O)₁₁(alcohol)]⁶⁺). Going in detail, the unsaturated hexameric clusters exhibit different dispositions of their eight carboxylate ligands in such a way that the remaining four carboxylate-free positions are arranged according to a square planar or tetrahedral symmetry. It should be highlighted that the pentameric complexes imply an unprecedented core nuclearity in zirconium clusters and thus their isolation provides a novel building block for the design of metal-organic materials.

Eu(O2 C-C≡C-CO2 ): An EuII Containing Anhydrous Coordination Polymer with High Stability and Negative Thermal Expansion

Anhydrous Eu^II -acetylenedicarboxylate (EuADC; ADC^2- = ^- O₂ C-C≡C-CO₂ ^- ) was synthesized by reaction of EuBr₂ with K₂ ADC or H₂ ADC in degassed water under oxygen-free conditions. EuADC crystallizes in the SrADC type structure (I4₁ /amd, Z=4) forming a 3D coordination polymer with a diamond-like arrangement of Eu²⁺ nodes (msw topology including the connecting ADC^2- linkers). Deep orange coloured EuADC is stable in air and starts decomposing upon heating in an argon atmosphere only at 440 °C. Measurements of the magnetic susceptibilities (μ_eff =7.76 μ_B ) and ¹⁵¹ Eu Mössbauer spectra (δ=-13.25 mm s^-1 at 78 K) confirm the existence of Eu²⁺ cations. Diffuse reflectance spectra indicate a direct optical band gap of E_g =2.64 eV (470 nm), which is in accordance with the orange colour of the material. Surprisingly, EuADC does not show any photoluminescence under irradiation with UV light of different wavelengths. Similar to SrADC, EuADC exhibits a negative thermal volume expansion below room temperature with a volume expansion coefficient α_V =-9.4(12)×10^-6  K^-1 .

A practical guide to calculate the isosteric heat/enthalpy of adsorption via adsorption isotherms in metal-organic frameworks, MOFs

Porous materials such as MOFs are interesting candidates for gas separation and storage. An important parameter to gain deeper insights to the adsorption process of an adsorptive on an adsorbent is the isosteric enthalpy of adsorption, ΔHads which is defined as the heat to be released/required when an adsorptive binds to/detaches from the solid surface of an adsorbent. Two or three adsorption isotherms at different but close temperatures with ΔT ≤ 20 K for two and ΔT ≈ 10 K for three isotherms are the basis to derive the isosteric enthalpy of adsorption through the Clausius-Clapeyron approach or the virial analysis. This Perspective presents the procedure of the common (dual-site) Freundlich-Langmuir fit/Clausius-Clapeyron approach and the virial fit of the isotherms with usable Excel sheets and Origin files for the subsequent derivation of ΔHads. Exemplary adsorption isotherms of CO2, SO2 and H2 at two temperatures on MOFs are analyzed. The detailed computational description and comparison of the Clausius-Clapeyron approach and the virial analysis to determine ΔHads outlines the limitations of the two methods with respect to the available experimental data, especially at low pressure/low uptake values. It is emphasized that no extrapolation beyond the experimental data range should be done. The quality of the important and underlying isotherm fits must be checked and ensured with logarithmic-scale n/p isotherm plots for the (dual-site) Freundlich-Langmuir fit in the low-pressure region and through low standard deviations for the coefficients in the virial analysis.

Halogen Functionalization of Aluminium Fumarate Metal–Organic Framework via In Situ Hydrochlorination of Acetylenedicarboxylic Acid

The successful chloro-functionalization of aluminium fumarate (MIL-53-Fum) was achieved by in situ hydrochlorination of acetylenedicarboxylic acid on reaction with aluminium chloride resulting in the formation of the aluminium chlorofumarate metal–organic framework (MIL-53-Fum-Cl=[Al(OH)(Fum-Cl)]) in a one-pot reaction. The chloro functional groups decorating the pores enhance gas (CO2, CH4, and H2) sorption capacities and affinity compared with the non-functionalized MIL-53-Fum. The functionalization also results in a 2-fold increase in the selective adsorption of CO2 over CH4 compared with MIL-53-Fum.

Acetylenedicarboxylate-based cerium(iv) metal–organic framework with fcu topology: a potential material for air cleaning from toxic halogen vapors

The most contracted Ce(iv)–metal–organic framework (MOF) with fcu topology incorporating an alkyne-based linker, namely acetylenedicarboxylate (ADC), was synthesized under green conditions in water at room temperature and thoroughly characterized.