Insights into Crystal Facets of Perovskite SrSnO3 as High-Performance Photocatalysts toward Environmental Remediation

Thermally Induced Lattice-Defective Oxygen Breathing in Perovskite-Structure Stannates with High-Contrast Reversible Thermochromism

Inorganic thermochromic materials exhibit a tunable color gamut and a wide chromatic temperature range, indicating their potential for intelligent adaptive applications in thermal warning, temperature indication, thermal regulation, and interactive light-to-thermal energy conversion. However, most metal-oxide-based thermochromic materials show weak chromaticity adaption with the change of temperature, which needs further understanding of the microscopic principle to clarify the potential route to improve the contrast and identifiability for fabricating better thermochromic materials. Using perovskite-structure (AMO3) alkaline earth metal stannate (Ba1-xSrxSnO3, 0.0 ≤ x ≤ 1.0) as a model system, this paper reports for the first time the mechanism of the properties of thermally induced defect-enhanced charge transfer-type (CTT) thermochromic materials and the strategy for regulating their thermochromic properties by A-site cations. BaSnO3 exhibits continuously reversible thermochromic properties with high contrast from weak light yellow (b* = 11) to strong bright yellow (b* = 58) between room temperature and 550 °C. In-situ high-temperature X-ray diffraction (in-situ XRD), in-situ UV-vis absorption spectroscopy (in-situ UV-vis), thermogravimetric (TG), and electron paramagnetic resonance (EPR) spectra indicate that this excellent thermochromic phenomenon is attributed to the weakening of Sn-O bond hybridization at high temperatures, as well as the formation of a large number of oxygen vacancies at the top of the valence band, and the enhanced charge transfer resulting from the generation of impurity levels in the Sn2+ 5s2 intermediate. Replacing Ba2+ by Sr2+ in Ba1-xSrxSnO3 successfully tuned the thermochromic properties, which is attributed to the Sr2+ doping level-directed oxygen defect concentration and deoxygenation rate. The demonstrated defect-enhanced charge transfer behavior promotes a feasible route for lattice oxygen-mediated thermochromic materials and provides a fundamental relationship between thermally induced defects and colorimetry.

Ag nanoparticle-decorated chitosan/SrSnO3 nanocomposite for ultrafast elimination of antibiotic linezolid and methylene blue

Effective design of ultrafast new-generation photocatalysts is a challenging task that requires highly dedicated efforts. This research focused on the development and design of ultrafast smart ternary photocatalysts containing SrSnO₃ nanostructures in conjugation with chitosan (CTSN) and silver (Ag) nanoparticles by a very simple and straightforward methodology. Modern analytical tools such as FESEM, TEM, XRD, XPS, FTIR, and UV-Vis spectroscopy were employed to characterize the synthesized nanostructures. XRD and XPS analysis confirmed the successful creation of ternary organization among the Ag, CTSN, and SrSnO₃. The TEM images clearly confirmed that CTSN possessed overlapping micron-sized sheets with a layered morphology, whereas the undoped SrSnO₃ particles exhibited spherical and elongated shapes and particle sizes ranging from 20 to 80 nm. These particles were produced in high density with homogeneously distributed Ag nanoparticles (4-15 nm). The bandgap energy (E_g) for bare SrSnO₃, CTSN/SrSnO₃, and Ag@CTSN/SrSnO₃ nanocomposites was found to be 4.0, 3.94, and 3.7 eV, respectively. The photocatalytic efficiencies of all newly created photocatalysts were evaluated by considering an antibiotic linezolid drug and methylene blue (MB) dye molecule as target analytes. Among all investigated samples, the Ag@CTSN/SrSnO₃ photocatalyst was found to be highly superior, with ultrafast removal of the linezolid drug at 96.02% within 25 min and almost total removal of the MB dye in just 12 min under UV light irradiation. The Ag@CTSN/SrSnO₃ photocatalyst exhibited removal rate that was 3.36 times faster than that of bare SrSnO₃. The present report delivers a highly promising, extremely efficient, and very simple, straightforward treatment methodology for the effective destruction of lethal and notorious pollutants, enabling the appropriate management of current environmental concerns.

Developing sustainable, high-performance perovskites in photocatalysis: design strategies and applications

Solar energy is attractive because it is free, renewable, abundant and sustainable. Photocatalysis is one of the feasible routes to utilize solar energy for the degradation of pollutants and the production of fuel. Perovskites and their derivatives have received substantial attention in both photocatalytic wastewater treatment and energy production because of their highly tailorable structural and physicochemical properties. This review illustrates the basic principles of photocatalytic reactions and the application of these principles to the design of robust and sustainable perovskite photocatalysts. It details the structures of the perovskites and the physics and chemistry behind photocatalytic reactions and describes the advantages and limitations of popular strategies for the design of photoactive perovskites. This is followed by examples of how these strategies are applied to enhance the photocatalytic efficiency of oxide, halide and oxyhalide perovskites, with a focus on materials with potential for practical application, that is, not containing scarce or toxic elements. It is expected that this overview of the development of photocatalysts and deeper understanding of photocatalytic principles will accelerate the exploitation of efficient perovskite photocatalysts and bring about effective solutions to the energy and environmental crisis.

Recyclable Target Metal-Enhanced Fluorometric Naked Eye Aptasensor for the Detection of Pb2+ and Ag+ Ions Based on the Structural Change of CaSnO3@PDANS-Constrained GC-Rich ssDNA

Reliable, label-free, and ultraselective detection of Pb2+ and Ag+ ions is of paramount importance for toxicology assessment, human health, and environmental protection. Herein, we present a novel recyclable fluorometric aptasensor based on the Pb2+ and Ag+-induced structural change of the GC-rich ssDNA (guanine cytosine-rich single-strand DNA) and the differences in the fluorescence emission of acridine orange (AO) from random coil to highly stable G-quadruplex for the detection of Pb2+ and Ag+ ions. More interestingly, the construction and principle of the aptasensor explore that the GC-rich ssDNA and AO can be strongly adsorbed on the CaSnO3@PDANS surface through the π-π stacking, hydrogen-bonding, and metal coordination interactions, which exhibit high fluorescence quenching and robust holding of the GC-rich ssDNA. However, in the presence of Pb2+, the specific G-rich ssDNA segment could form a stable G-quadruplex via G4-Pb2+ coordination and capture of AO from the CaSnO3@PDANS surface resulting in fluorescence recovery (70% enhancement). The subsequent addition of Ag+ ion induces coupled cytosine base pairs in another segment of ssDNA to get folded into a duplex structure together with the G-quadruplex, which highly stabilizes the G-quadruplex resulting in the maximum recovery of AO emission (99% enhancement). When the Cys@Fe3O4Nps are added to the above solution, the sensing probe was restored by complexation between the Cys in the Cys@Fe3O4Nps and target metal ions, resulting in the fabrication of a highly sensitive recyclable Pb2+ and Ag+ assay with detection limits of 0.4 and 0.1 nM, respectively. Remarkably, the Cys@Fe3O4Nps can also be reused after washing with EDTA. The utility of the proposed approach has great potential for detecting the Pb2+ and Ag+ ions in environmental samples with interfering contaminants.

The Potential of Overlayers on Tin-based Perovskites for Water Splitting

Photoelectrochemical water splitting is a promising method of clean hydrogen production for green energy uses. Here, we report on a tin-based oxide perovskite combined with an overlayer that shows enhanced bifunctional hydrogen and oxygen evolution. In our first-principles study of tin-based perovskites, based upon density functional theory, we investigate how the formation of a surface affects the electronic properties of these materials. We show that the best candidate, SrSnO₃, possesses hydrogen and oxygen overpotentials of 0.75 and 0.72 eV, respectively, which are reduced to 0.35 and 0.54 eV with the inclusion of a ZrO₂ overlayer. Furthermore, this overlayer promotes charge extraction, stabilizes the reaction pathways, and improves the band gap such that it straddles the overpotentials between pH 0 and pH 12. This result indicates that SrSnO₃ with a ZrO₂ overlayer has significant potential as a highly efficient bifunctional water splitter for producing hydrogen and oxygen gas on the same surface.

Interstitial N-doped SrSnO3 perovskite: structural design, modification and photocatalytic degradation of dyes

An easy-to-manipulate, two-step, solid-state synthetic method was adopted to incorporate N element into the SrSnO₃ perovskite for structural modification, which improved its photocatalytic performance.