Edge-oriented growth of cadmium sulfide nanoparticles on nickel metal-organic framework nanosheets for photocatalytic hydrogen evolution

In this study, a directional loading of cadmium sulfide (CdS) nanoparticles (NPs) was achieved on the opposite edges of nickel metal-organic framework (Ni-MOF) nanosheets (NSs) by adjusting the weight ratio of CdS NPs in the reaction process to produce effective visible light photocatalysts. The close contact between the zero-dimensional (0D) and two-dimensional (2D) regions and the matching positions of the bands promoted charge separation and heterojunction formation. The optimal CdS NPs loading of composite material was 40 wt%. At this ratio, CdS NPs grew primarily at the opposite edges of the Ni-MOF NSs rather than on their surfaces. When lactic acid was used as the sacrificial agent, the hydrogen production rate of the 40 %-CdS/Ni-MOF heterojunction under visible light irradiation was 19.6 mmol h-1 g-1, making a 20-fold enhancement compared to the original CdS NPs sample (1.0 mmol h-1 g-1). The charge carriers generated in CdS NPs were transferred to Ni-MOF NSs through heterojunctions, where Ni-MOF NSs also served as cocatalysts to improve hydrogen production. The combination of the two materials improved the light absorption ability. In particular, the 40 %-CdS/Ni-MOF heterojunction exhibited good photostability, effectively preventing the photocorrosion of CdS NPs. This study introduces an approach for constructing efficient and stable photocatalysts for visible light-driven photocatalytic hydrogen production.

Removing unreacted amino groups in graphitic carbon nitride through residual heating to improve the photocatalytic performance

In most of the research about graphitic carbon nitride (g-C₃N₄), g-C₃N₄ is prepared through the calcination of nitrogen-rich precursors. However, such a preparation method is time-consuming, and the photocatalytic performance of pristine g-C₃N₄ is lackluster due to the unreacted amino groups on the surface of g-C₃N₄. Therefore, a modified preparation method, calcination through residual heating, was developed to achieve rapid preparation and thermal exfoliation of g-C₃N₄ simultaneously. Compared with pristine g-C₃N₄, the samples prepared by residual heating had fewer residual amino groups, a thinner 2D structure, and higher crystallinity, which led to a better photocatalytic performance. The photocatalytic degradation rate of the optimal sample for rhodamine B could reach 7.8 times higher than that of pristine g-C₃N₄.

Research Progress on Catalytic Water Splitting Based on Polyoxometalate/Semiconductor Composites

In recent years, due to the impact of global warming, environmental pollution, and the energy crisis, international attention and demand for clean energy are increasing. Hydrogen energy is recognized as one of the clean energy sources. Water is considered as the largest potential supplier of hydrogen energy. However, artificial catalytic water splitting for hydrogen and oxygen evolution has not been widely used due to its high energy consumption and high cost during catalytic cracking. Therefore, the exploitation of photocatalysts, electrocatalysts, and photo-electrocatalysts for rapid, cost effective, and reliable water splitting is essentially needed. Polyoxometalates (POMs) are regarded as the potential candidates for water splitting catalysis. In addition to their excellent catalytic properties and reversibly redox activities, POMs can also modify semiconductors to overcome their shortcomings, and improve photoelectric conversion efficiency and photocatalytic activity, which has attracted more and more attention in the field of photoelectric water splitting catalysis. In this review, we summarize the latest applications of POMs and semiconductor composites in the field of photo-electrocatalysis (PEC) for hydrogen and oxygen evolution by catalytic water splitting in recent years and take the latest applications of POMs and semiconductor composites in photocatalysis for water splitting. In the conclusion section, the challenges and strategies of photocatalytic and PEC water-splitting by POMs and semiconductor composites are discussed.

NiO Nanosheets Coupled With CdS Nanorods as 2D/1D Heterojunction for Improved Photocatalytic Hydrogen Evolution

Designing low-cost, environment friendly, and highly active photocatalysts for water splitting is a promising path toward relieving energy issues. Herein, one-dimensional (1D) cadmium sulfide (CdS) nanorods are uniformly anchored onto two-dimensional (2D) NiO nanosheets to achieve enhanced photocatalytic hydrogen evolution. The optimized 2D/1D NiO/CdS photocatalyst exhibits a remarkable boosted hydrogen generation rate of 1,300 μmol h-1 g-1 under visible light, which is more than eight times higher than that of CdS nanorods. Moreover, the resultant 5% NiO/CdS composite displays excellent stability over four cycles for photocatalytic hydrogen production. The significantly enhanced photocatalytic activity of the 2D/1D NiO/CdS heterojunction can be attributed to the efficient separation of photogenerated charge carriers driven from the formation of p-n NiO/CdS heterojunction. This study paves a new way to develop 2D p-type NiO nanosheets-decorated n-type semiconductor photocatalysts for photocatalytic applications.

Polypyrrole/cadmium sulfide hollow fiber with high performance contaminant removal and photocatalytic activity fabricated by layer-by-layer deposition and fiber-sacrifice template approach

A recyclable polypyrrole (PPy)/cadmium sulfide (CdS) hollow fiber photocatalyst was innovatively fabricated for solving the loss issue of the current powder-form photocatalyst in slurry system. Core-sheath structure CdS/polyacrylonitrile (PAN) fiber was prepared via successive ionic layer adsorption and reaction (SILAR) method on the surface of PAN fiber. PPy was further deposited on the CdS/PAN fiber by vapor deposition polymerization. After the removal of interior PAN template, PPy/CdS hollow fiber was yielded. The hollow structure of PPy/CdS hollow fiber was confirmed by morphology observation. The resulting PPy/CdS hollow fiber presents low energy band gaps of 1.9 eV, which accounts for enhanced visible light photocatalytic activity after PPy deposition. PPy/CdS hollow fiber shows good dye removal efficiency of 73.06 wt% (dosage of the product as low as 5 mg·10 mL^-1), and praiseworthy H₂ production rate up to 269.7 μmol·g^-1·h^-1. PPy/CdS hollow fiber maintained high and sustainable photocatalytic activity compared to CdS/PAN fiber after 8 cycles, indicating that PPy effectively improved the stability of CdS. Here, PPy plays key synergistic role in photocatalysis of PPy/CdS hollow fiber for the promotive and protective effects based on the actual photocatalytic performance and inductively coupled plasma optical emission spectrometer (ICP-OES) results. Compared with nano-sized photocatalysts, the fiber-formed PPy/CdS hollow fiber is highly bulky and easy to recycle. PPy/CdS hollow fiber has great potential for scale-up in industrial application because of its excellent grabbing ability and degradation to contaminants, and ease of disposal.