Supramolecular Assembly-Improved Triplet-Triplet Annihilation Upconversion in Aqueous Solution

Supramolecular Annihilator with DPA Parallelly Arranged by Multiple Hydrogen-Bonding Interactions for Enhanced Triplet-Triplet Annihilation Upconversion

The triplet annihilator is a critical component for triplet-triplet annihilation upconversion (TTA-UC); both the photophysical properties of the annihilator and the intermolecular orientation have pivotal effects on the overall efficiency of TTA-UC. Herein, we synthesized two supramolecular annihilators A-1 and A-2 by grafting 9,10-diphenylanthracene (DPA) fragments, which have been widely used as triplet annihilators for TTA-UC, on a macrocyclic host-pillar[5]arenes. In A-1, the orientation of the two DPA units was random, while, in A-2, the two DPA units were pushed to a parallel arrangement by intramolecular hydrogen-bonding interactions. The two compounds showed very similar photophysical properties and host-guest binding affinities toward electron-deficient guests, but showed totally different TTA-UC emissions. The UC quantum yield of A-2 could be optimized to 13.7% when an alkyl ammonia chain-attaching sensitizer S-2 was used, while, for A-1, only 5.1% was achieved. Destroying the hydrogen-bonding interactions by adding MeOH to A-2 significantly decreased the UC emissions, demonstrating that the parallel orientations of the two DPA units contributed greatly to the TTA-UC emissions. These results should be beneficial for annihilator designs and provide a new promising strategy for enhancing TTA-UC emissions.

A supramolecular assembly-based strategy towards the generation and amplification of photon up-conversion and circularly polarized luminescence

For the molecular properties in which energy transfer/migration is determinantal, such as triplet-triplet annihilation-based photon up-conversion (TTAUC), the overall performance is largely affected by the intermolecular distance and relative molecular orientations. In such scenarios, tools that may steer the intermolecular interactions and provide control over molecular organisation in the bulk, become most valuable. Often these non-covalent interactions, found predominantly in supramolecular assemblies, enable pre-programming of the molecular network in the assembled structures. In other words, by employing supramolecular chemistry principles, an arrangement where molecular units are arranged in a desired fashion, very much like a Lego toy, could be achieved. This leads to enhanced energy transfer from one molecule to other. In recent past, chiral luminescent systems have attracted huge attention for producing circularly polarized luminescence (CPL). In such systems, chirality is a necessary requirement. Chirality induction/transfer through supramolecular interactions has been known for a long time. It was realized recently that it may help in the generation and amplification of CPL signals as well. In this review article we have discussed the applicability of self-/co-assembly processes for achieving maximum TTA-UC and CPL in various molecular systems.

Triplet-Triplet Annihilation Upconversion in a Porphyrinic Molecular Container

Triplet-triplet annihilation-based molecular photon upconversion (TTA-UC) is a photophysical phenomenon that can yield high-energy emitting photons from low-energy incident light. TTA-UC is believed to fuse two triplet excitons into a singlet exciton through several consecutive energy-conversion processes. When organic aromatic dyes─i.e., sensitizers and annihilators─are used in TTA-UC, intermolecular distances, as well as relative orientations between the two chromophores, are important in an attempt to attain high upconversion efficiencies. Herein, we demonstrate a host-guest strategy─e.g., a cage-like molecular container incorporating two porphyrinic sensitizers and encapsulating two perylene emitters inside its cavity─to harness photon upconversion. Central to this design is tailoring the cavity size (9.6-10.4 Å) of the molecular container so that it can host two annihilators with a suitable [π···π] distance (3.2-3.5 Å). The formation of a complex with a host:guest ratio of 1:2 between a porphyrinic molecular container and perylene was confirmed by NMR spectroscopy, mass spectrometry, and isothermal titration calorimetry (ITC) as well as by DFT calculations. We have obtained TTA-UC yielding blue emission at 470 nm when the complex is excited with low-energy photons. This proof-of-concept demonstrates that TTA-UC can take place in one supermolecule by bringing together the sensitizers and annihilators. Our investigations open up some new opportunities for addressing several issues associated with supramolecular photon upconversion, such as sample concentrations, molecular aggregation, and penetration depths, which have relevance to biological imaging applications.

Continuous flow synthesis of 6-monoamino-6-monodeoxy-β-cyclodextrin

The first continuous flow method was developed for the synthesis of 6-monoamino-6-monodeoxy-β-cyclodextrin starting from native β-cyclodextrin through three reaction steps, such as monotosylation, azidation and reduction. All reaction steps were studied separately and optimized under continuous flow conditions. After the optimization, the reaction steps were coupled in a semi-continuous flow system, since a solvent exchange had to be performed after the tosylation. However, the azidation and the reduction steps were compatible to be coupled in one flow system obtaining 6-monoamino-6-monodeoxy-β-cyclodextrin in a high yield. Our flow method developed is safer and faster than the batch approaches.

Triplet-triplet annihilation upconversion in LAPONITE®/PVP nanocomposites: absolute quantum yields of up to 23.8% in the solid state and application to anti-counterfeiting

The low quantum efficiency in the solid phase and the highly efficient quenching by oxygen are two major weaknesses limiting the practical applications of triplet-triplet annihilation (TTA) upconversion (UC). Herein, we report an organic-inorganic hybrid nanocomposites fabricated by self-assembly of LAPONITE® clay and poly(N-vinyl-2-pyrrolidone) (PVP), which serves as excellent matrix for solid-state TTA-UC even in air. In the hybrid hydrogel doped by TTA-UC components, the anionic acceptors are arranged in an ordered manner at the nano-disk edge through electrostatic attraction, which avoids haphazard accumulation of the acceptors and allows for highly efficient inter-acceptor triplet energy migration. Moreover, the entangled PVP could not only protect the triplet excitons from oxygen quenching but even proactively eliminate oxygen by photoirradiation. Significantly, the dried gel prepared by completely removing water from the hydrogel gave absolute UC quantum efficiencies of up to 23.8% (out of a 50% maximum), which is the highest TTA-UC efficiency obtained in the solid state. The dried gels are readily made into powder by grinding with maintained UC emissions, making them convenient for application to information encryption and anti-counterfeiting security by virtue of the high UC quantum efficiency and insensitivity to oxygen.

BODIPY-conjugated bis-terpyridine Ru(II) complexes showing ultra-long luminescence lifetimes and applications to triplet-triplet annihilation upconversion

The poor excited-state properties of bis-terpyridine Ru(II) complexes have significantly limited the applications of these complexes as sensitizers in photocatalysis and triplet-triplet annihilation upconversion. In the present work, two novel ruthenium bis-terpyridine complexes (Ru-1 and Ru-2) conjugated with visible-light-harvesting bodipy chromophores were synthesized. These complexes showed strong absorption of visible light, the bodipy-localized intraligand triplet state (³IL) was efficiently populated, and the phosphorescence of bodipy at room temperature in both complexes was observed. The luminescence lifetimes of these complexes were significantly prolonged, with that of the heteroleptic complex Ru-2 prolonged to 37.9 μs and that of the homoleptic bis-terpyridine complex Ru-1 unprecedentedly prolonged to 356 μs, which was hundreds of times longer than the current longest emissive state achieved in ruthenium terpyridine complexes. The ultra-long triplet lifetimes and strong visible-light absorbing ability made them new candidates of triplet sensitizers, and were first applied to TTA-UC for terpyridine Ru(II) complexes with a Ru-1/Py system showing a Φ_UC of 2.93% in dilute solutions at concentrations as low as 1.0 μM.

Mono-6-Substituted Cyclodextrins-Synthesis and Applications

Cyclodextrins are well known supramolecular hosts used in a wide range of applications. Monosubstitution of native cyclodextrins in the position C-6 of a glucose unit represents the simplest method how to achieve covalent binding of a well-defined host unit into the more complicated systems. These derivatives are relatively easy to prepare; that is why the number of publications describing their preparations exceeds 1400, and the reported synthetic methods are often very similar. Nevertheless, it might be very demanding to decide which of the published methods is the best one for the intended purpose. In the review, we aim to present only the most useful and well-described methods for preparing different types of mono-6-substituted derivatives. We also discuss the common problems encountered during their syntheses and suggest their optimal solutions.

Weakened Triplet-Triplet Annihilation of Diiodo-BODIPY Moieties without Influence on Their Intrinsic Triplet Lifetimes in Diiodo-BODIPY-Functionalized Pillar[5]arenes

The triplet-triplet annihilation (TTA) effect of sensitizers themselves can lead to the additional quenching of lifetimes of triplet states; therefore, how to weaken the TTA effect of sensitizers is an urgent issue to be resolved for their further applications. Besides, it remains a tremendous challenge for constructing supramolecular systems of photosensitizers based on photosensitizer-functionalized pillararenes because there have been very few investigations on them. Thus, 2,6-diiodo-1,3,5,7-tetramethyl-8-phenyl-4,4-difluoroboradiazaindacene (DIBDP) and ethoxy pillar[5]arene (EtP5) were utilized to synthesize a DIBDP-functionalized pillar[5]arene (EtP5-DIBDP), a cyano-containing DIBDP (G) used as a guest molecule was also prepared, and they were used to investigate the electron-transfer mechanism between EtP5 and DIBDP moieties and weaken the TTA effect of DIBDP moieties. The theoretical computational results of frontier molecular orbitals and isosurfaces of spin density preliminarily predicted that the cavities of the EtP5 moiety had influence on the fluorescence emission of DIBDP units but not on their triplet states in EtP5-DIBDP. The fluorescence emission intensities in a variety of solvents with different polarities and electrochemical studies revealed that there was electron transfer from EtP5 to the DIBDP units, and the electron-transfer process had influence on the fluorescence emission but not on the triplet states of DIBDP moieties in EtP5-DIBDP, which verified the results of density functional theory calculations. The triplet state lifetimes of EtP5-DIBDP were longer than those of DIBDP and G and the photooxidation abilities of EtP5-DIBDP were better than those of DIBDP and G at a high concentration (1.0 × 10^-5 M) in various solvents; in contrast, the intrinsic triplet state lifetimes and singlet oxygen quantum yields (Φ_Δ) of DIBDP, G, and EtP5-DIBDP were very similar. This was because the steric hindrance of EtP5 moieties could weaken the TTA effect of DIBDP moieties without influencing their intrinsic triplet state lifetimes in EtP5-DIBDP.

Metal-Free White Light-Emitting Fluorescent Material Based on Simple Pillar[5]arene-tripodal Amide System and Theoretical Insights on Its Assembly and Fluorescent Properties

The booming of host-guest assembly-based supramolecular chemistry provides abundant ways to construct functional systems and materials. Attracted by the important application prospect of white light emission and aggregation-induced emission (AIE) materials, herein, we report an efficient way for fabricating metal-free white light-emitting AIE materials through the supramolecular assembly of simple organic compounds: methoxyl pillar[5]arene (MP5) and tri-(pyridine-4-ylamido)benzene (TAP). By host-guest assembly, MP5 and TAP formed a supramolecular polymer (MP5-T); meanwhile, the MP5-T xerogel powder emitted white light at CIE coordinates (0.29 and 0.29). The supramolecular assembly and white light-emitting mechanisms were carefully investigated by experiments as well as quantum chemical calculations including density functional theory (DFT), reduced density gradient, electrostatic surface potential, independent gradient model, and frontier molecular orbital (highest-occupied molecular orbital-lowest-unoccupied molecular orbital) analyses. Interestingly, according to the experiments and calculations, the supramolecular assembly is critical in the white light-emitting phenomenon. Moreover, in this work, the quantum chemical calculations could not only support experimental phenomena but also provide deep understanding and visualized presentation of the assembly and emission mechanism. In addition, the obtained MP5-T solid powder could serve as a novel and easy means to make material for white light-emitting devices.

Recent applications of biphotonic processes in organic synthesis

Organic synthesis mediated by biphotonic processes has gained great momentum in the last five years. Herein, an overview of the existing examples is reported.

Multi-charged bis(p-calixarene)/pillararene functionalized gold nanoparticles for ultra-sensitive sensing of butyrylcholinesterase

A series of supramolecular assemblies based on multi-charged calixarene (SC4A), bis(p-calixarene) (BSC4A) and pillararene (CP5A) modified gold nanoparticles (AuNP) was constructed to realize colorimetric sensing of both succinylcholine (SuCh) and butyrylcholinesterase (BChE). With the high binding affinity of BSC4A and CP5A towards SuCh, BSC4A-AuNPs and CP5A-AuNPs could assemble with micromolar level SuCh as SuCh-BSC4A/CP5A-AuNPs. More interestingly, the enzymatic hydrolysis of SuCh by BChE could lead to the disassembly of SuCh-BSC4A/CP5A-AuNPs and provide a sensitive time-dependent color change from blue to red which could be observed by the naked eye and used to monitor BChE activity. As BChE activity is an important biomarker for diseases and poor health conditions, this novel supramolecular tandem colorimetric sensing strategy may have potential use for early diagnosis of diseases.

Engineering Porous Emitting Framework Nanoparticles with Integrated Sensitizers for Low-Power Photon Upconversion by Triplet Fusion

The conversion of low-energy light into photons of higher energy based on sensitized triplet-triplet annihilation (sTTA) upconversion is emerging as the most promising wavelength-shifting methodology because it operates efficiently at excitation powers as low as the solar irradiance. However, the production of solid-state upconverters suited for direct integration in devices is still an ongoing challenge owing to the difficulties concerning the organization of two complementary moieties, the triplet sensitizer, and the annihilator, which must interact efficiently. This problem is solved by fabricating porous fluorescent nanoparticles wherein the emitters are integrated into robust covalent architectures. These emitting porous aromatic framework (ePAF) nanoparticles allow intimate interaction with the included metallo-porphyrin as triplet sensitizers. Remarkably, the high concentration of framed chromophores ensures hopping-mediated triplet diffusion required for TTA, yet the low density of the framework promotes their high optical features without quenching effects, typical of the solid state. A green-to-blue photon upconversion yield as high as 15% is achieved: a record performance among annihilators in a condensed phase. Furthermore, the engineered ePAF architecture containing covalently linked sensitizers produces full-fledge solid-state bicomponent particles that behave as autonomous nanodevices.

Triplet-Triplet Annihilation-Based Upconversion Sensitized by a Reverse Micellar Assembly of Amphiphilic Ruthenium Complexes

We have developed a new photon upconversion (UC) system utilizing a new amphiphilic sensitizer 1a that comprises a hydrophilic ruthenium complex and a lipophilic bisanthracene appendage. At concentrations higher than 5 μM in toluene, the sensitizer 1a formed a reverse micellar assembly which facilitated the triplet sensitization of 9,10-diphenylanthracene (DPA) more efficiently than homogeneously dispersed solutions to enhance the UC efficiency up to 38.2%. The Stern-Volmer analyses revealed the stepwise triplet-triplet energy transfers (TTET): (1) intramicellar energy transfer from the ruthenium core to the bisanthracene surface and (2) diffusion-dependent energy transfer from the surface to DPA. On these bases, it can be assumed that the reverse micellar assemblies accelerate the former TTET process to enhance the UC efficiency.

Synthesis, enantioseparation and photophysical properties of planar-chiral pillar[5]arene derivatives bearing fluorophore fragments

Planar chiral pillar[5]arene derivatives (P5A-DPA and P5A-Py) bearing bulky fluorophores were obtained in high yield by click reaction. The photophysical properties of both compounds were investigated in detail. P5A-DPA with two 9,10-diphenylanthracene (DPA) pigments grafted on the pillar[5]arene showed a high fluorescence quantum yield of 89.5%. This is comparable to the monomer DPA-6, while P5A-Py with two perylene (Py) pigments grafted on the pillar[5]arene showed a significantly reduced quantum yield of 46.4% vs 78.2% for the monomer Py-6. The oxygen-through-annulus rotation of the phenolic units was inhibited for both compounds due to the bulky chromophore introduced, and the resolution of the enantiomers was achieved due to the bulky size of the fluorophores. The absolute configuration of the enantiomers was determined by circular dichroism (CD) spectra. The solvent-induced aggregation behavior was investigated with the enantiopure P5A-DPA and P5A-Py. It was found that the CD signals were enhanced by aggregation. P5A-DPA showed aggregation-induced emission enhancement, while P5A-Py showed aggregation-induced emission quenching, accompanied by excimer emission when aggregating in water and THF mixed solution.

Complexation of a guanidinium-modified calixarene with diverse dyes and investigation of the corresponding photophysical response

We herein describe the comprehensive investigation of the complexation behavior of a guanidinium-modified calix[5]arene pentaisohexyl ether (GC5A) with a variety of typical luminescent dyes. Fluorescein, eosin Y, rose bengal, tetraphenylporphine sulfonate and sulfonated aluminum phthalocyanine were employed as classical aggregation-induced quenching dyes. 2-(p-Toluidinyl)naphthalene-6-sulfonic acid and 1-anilinonaphthalene-8-sulfonic acid were selected as representatives of intramolecular charge-transfer dyes. Phosphated tetraphenylethylene was involved as the classical aggregation-induced emission dye. Sulfonated acedan representing one example of two-photon fluorescent probes, was also investigated. A ruthenium(II) complex with carboxylated bipyridyl ligands was included as a representative candidate of luminescent transition-metal complexes. We determined the association constants of the GC5A-dye complexes by fluorescence titration and discuss the complexation-induced photophysical changes. In addition, a comparison of the complexation behavior of GC5A with that of other macrocycles and potential applications according to the diverse photophysical responses are provided.

Effects of Temperature and Host Concentration on the Supramolecular Enantiodifferentiating [4 + 4] Photodimerization of 2-Anthracenecarboxylate through Triplet-Triplet Annihilation Catalyzed by Pt-Modified Cyclodextrins

Visible-light-driven photocatalytic supramolecular enantiodifferentiating dimerization of 2-anthracenecarboxylic acid (AC) through triplet-triplet annihilation (TTA), mediated by the Schiff base Pt(II) complex (Pt-1, Pt-2, and Pt-3) was studied. The host concentration and the temperature effects on the stereoselectivity were comprehensively investigated. Increasing the concentration of sensitizers/hosts significantly enhanced the conversion of the photoreaction but led to reduced enantioselectivities of the chiral photodimers 2 and 3 when the photoreaction was triggered by a 532 nm laser, which was in contrast with the results obtained by direct irradiation of AC with a 365 nm light-emitting diode (LED) lamp, due to the aggregation of the sensitizer/host in water. The cyclization of AC through triplet-triplet annihilation displayed significant temperature dependency when Pt-3 was employed as the sensitizer/host. Increasing the temperature from 0 °C to 30 °C with 5% equiv. of Pt-3 led to a great increase of the ee of 2 from 2.1% to 31.6%. However, hardly any temperature dependency was observed when the photodimerization was mediated by other sensitizers and/or hosts, or the photoreaction was triggered directly with a 365 nm LED lamp.

Room-temperature phosphorescent γ-cyclodextrin-cucurbit[6]uril-cowheeled [4]rotaxanes for specific sensing of tryptophan

The room temperature phosphorescence of iodine-substituted-γ-CD-CB[6]-cowheeled[4] rotaxanes was quenched specifically by tryptophan among plasma amino acids.