Bioinspired Architectures and Heteroatom Doping To Construct Metal‐Oxide‐Based Anode for High‐Performance Lithium‐Ion Batteries

Defective Metal Oxides: Lessons from CO2 RR and Applications in NOx RR

Sluggish reaction kinetics and the undesired side reactions (hydrogen evolution reaction and self-reduction) are the main bottlenecks of electrochemical conversion reactions, such as the carbon dioxide and nitrate reduction reactions (CO₂ RR and NO₃ RR). To date, conventional strategies to overcome these challenges involve electronic structure modification and modulation of the charge-transfer behavior. Nonetheless, key aspects of surface modification, focused on boosting the intrinsic activity of active sites on the catalyst surface, are yet to be fully understood. Engingeering of oxygen vacancies (OVs) can tune surface/bulk electronic structure and improve surface active sites of electrocatalysts. The continuous breakthroughs and significant progress in the last decade position engineering of OVs as a potential technique for advancing electrocatalysis. Motivated by this, the state-of-the-art findings of the roles of OVs in both the CO₂ RR and the NO₃ RR are presented. The review starts with a description of approaches to constructing and techniques for characterizing OVs. This is followed by an overview of the mechanistic understanding of the CO₂ RR and a detailed discussion on the roles of OVs in the CO₂ RR. Then, insights into the NO₃ RR mechanism and the potential of OVs on NO₃ RR based on early findings are highlighted. Finally, the challenges in designing CO₂ RR/NO₃ RR electrocatalysts and perspectives in studying OV engineering are provided.

In situ construction of one-dimensional porous MnO@C nanorods for electrode materials

Owing to cost-effectiveness, low conversion potential, and high theoretical capacity (756 mA h g⁻¹), MnO has been a potential candidate for LIB anode.

Enabling high electrochemical activity of a hollow SiO2 anode by decorating it with ultrafine cobalt nanoparticles and a carbon matrix for long-lifespan lithium ion batteries

Silica is a very promising anode material for lithium-ion batteries, due to its advantages of being resource-rich and having high theoretical specific capacity. However, poor electrochemical activity severely limits its practical application. To solve this issue, a nanosheet-assembled silica hierarchical hollow sphere decorated with ultrafine cobalt nanoparticles and carbon (SiO2/Co/C) is successfully synthesized. The hollow structure can effectively alleviate the volume expansion, shorten the migration distance of lithium ions, and increase the binding site. Furthermore, the carbon matrix and highly active ultrafine cobalt nanoparticles enhance not only the electronic conductivity but also the electrochemical activity (catalyzing the breaking of Si-O and Li-O bonds) of SiO2. The resulting SiO2/Co/C composite has a high reversible capacity of 1160 mA h g-1 at 0.2 A g-1 and still has a specific capacity of 548 mA h g-1 after 1000 cycles at a high current density of 1.0 A g-1. Moreover, the SiO2/Co/C composite also exhibits good electrochemical performance in a full cell.

Carbon Nanotubes Coupled with Metal Ion Diffusion Layers Stabilize Oxide Conversion Reactions in High-Voltage Lithium-Ion Batteries

Creating new architectures combined with super diverse materials for achieving more excellent performances has attracted great attention recently. Herein, we introduce a novel dual metal (oxide) microsphere reinforced by vertically aligned carbon nanotubes (CNTs) and covered with a titanium oxide metal ion-transfer diffusion layer. The CNTs penetrate the oxide particles and buffer structural volume change while enhancing electrical conductivity. Meanwhile, the external TiO₂-C shell serves as a transport pathway for mobile metal ions (e.g., Li⁺) and acts as a protective layer for the inner oxides by reducing the electrolyte/metal oxide interfacial area and minimizing side reactions. The proposed design is shown to significantly improve the stability and Coulombic efficiency (CE) of metal (oxide) anodes. For example, the as-prepared MnO-CNTs@TiO₂-C microsphere demonstrates an extremely high capacity of 967 mA h g^-1 after 200 cycles, where a CE as high as 99% is maintained. Even at a harsh rate of 5 A g^-1 (ca. 5 C), a capacity of 389 mA h g^-1 can be maintained for thousands of cycles. The proposed oxide anode design was combined with a nickel-rich cathode to make a full-cell battery that works at high voltage and exhibits impressive stability and life span.

Crystal reconstruction of binary oxide hexagonal nanoplates: monocrystalline formation mechanism and high rate lithium-ion battery applications

Structural design and/or carbon modification are the most important strategies to improve the performance of materials in many applications, where metal (oxide)-based anode design attracts great attention in metal ion batteries due to their high capacities. However, achieving these two goals within one-step remains challenging due to the lower cost and higher efficiency needed to satisfy the demand in practical application. Herein, we report a new approach for the crystal reconstruction of metal oxides by acetylene treatment, in which a hierarchical binary oxide decorated with carbon (i.e., Mn2Mo3O8@C) is introduced. The mechanism of constructing unique monocrystalline hexagonal nanoplates and uniform carbon coating is discussed in detail. Benefiting from the uniqueness of structure and composition, the Mn2Mo3O8@C demonstrates an extremely high lithium storage capacity of 890 mA h g-1 and good rate capacities at 20 A g-1 over 1000 cycles. In addition, the high rate capabilities and long cycle lifespan are further confirmed when the Mn2Mo3O8@C anode is matched with the nickel-rich layered oxide cathode. This study not only introduces a new binary oxide anode with high performances in lithium (ion) batteries but also presents a convenient methodology to design more advanced functional materials.

X-ray Nano-computed Tomography of Electrochemical Conversion in Lithium-ion Battery

Herein, a nanometric CuO anode for lithium-ion batteries was investigated by combining electrochemical measurements and ex situ X-ray computed tomography (CT) at the nanoscale. The electrode reacted by conversion at about 1.2 and 2.4 V versus Li⁺ /Li during discharge and charge, respectively, to deliver a capacity ranging from 500 mAh g^-1 to over 600 mAh g^-1 . Three-dimensional nano-CT imaging revealed substantial reorganization of the CuO particles and precipitation of a Li⁺ -conducting film suitable for a possible application in the battery. A lithium-ion cell, exploiting the high capacity of the conversion process, was assembled by using a high-performance LiNi_0.33 Co_0.33 Mn_0.33 O₂ cathode reacting at 3.9 V versus Li⁺ /Li. The cell was proposed as an energy-storage system with an average working voltage of about 2.5 V, specific capacity of 170 mAh g_cathode ^-1 , and efficiency exceeding 99 % with a very stable cycling.