Visible‐Light Direct Conversion of Ethanol to 1,1‐Diethoxyethane and Hydrogen over a Non‐Precious Metal Photocatalyst

Simultaneous Photocatalytic Production of H2 and Acetal from Ethanol with Quantum Efficiency over 73% by Protonated Poly(heptazine imide) under Visible Light

In this work, protonated poly(heptazine imide) (H-PHI) was obtained by adding acid to the suspension of potassium PHI (K-PHI) in ethanol. It was established that the obtained H-PHI demonstrates very high photocatalytic activity in the reaction of hydrogen formation from ethanol in the presence of Pt nanoparticles under visible light irradiation in comparison with K-PHI. This enhancement can be attributed to improved efficiency of photogenerated charge transfer to the photocatalyst's surface, where redox processes occur. Various factors influencing the system's activity were evaluated. Notably, it was discovered that the conditions of acid introduction into the system can significantly affect the size of Pt (cocatalyst metal) deposition on the H-PHI surface, thereby enhancing the photocatalytic system's stability in producing molecular hydrogen. It was established that the system can operate efficiently in the presence of air without additional components on the photocatalyst surface to block air access. Under optimal conditions, the apparent quantum yield of molecular hydrogen production at 410 nm is around 73%, the highest reported value for carbon nitride materials to date. The addition of acid not only increases the activity of the reduction part of the system but also leads to the formation of a value-added product from ethanol-1,1-diethoxyethane (acetal) with high selectivity.

Solar-Driven Biomass Reforming for Hydrogen Generation: Principles, Advances, and Challenges

Hydrogen (H2) has emerged as a clean and versatile energy carrier to power a carbon-neutral economy for the post-fossil era. Hydrogen generation from low-cost and renewable biomass by virtually inexhaustible solar energy presents an innovative strategy to process organic solid waste, combat the energy crisis, and achieve carbon neutrality. Herein, the progress and breakthroughs in solar-powered H2 production from biomass are reviewed. The basic principles of solar-driven H2 generation from biomass are first introduced for a better understanding of the reaction mechanism. Next, the merits and shortcomings of various semiconductors and cocatalysts are summarized, and the strategies for addressing the related issues are also elaborated. Then, various bio-based feedstocks for solar-driven H2 production are reviewed with an emphasis on the effect of photocatalysts and catalytic systems on performance. Of note, the concurrent generation of value-added chemicals from biomass reforming is emphasized as well. Meanwhile, the emerging photo-thermal coupling strategy that shows a grand prospect for maximally utilizing the entire solar energy spectrum is also discussed. Further, the direct utilization of hydrogen from biomass as a green reductant for producing value-added chemicals via organic reactions is also highlighted. Finally, the challenges and perspectives of photoreforming biomass toward hydrogen are envisioned.

Effective Photocatalytic Ethanol Reforming into High-Value-Added Multicarbon Compound Coupled with H2 Production Over Pt-S3 Sites at PtSA-ZnIn2S4 Interface

Selective photocatalytic production of high-value acetaldehyde concurrently with H2 from bioethanol is an appealing approach to meet the urgent environment and energy issues. However, the difficult ethanol dehydrogenation and insufficient active sites for proton reduction within the catalysts, and the long spatial distance between these two sites always restrict their catalytic activity. Here, guided by the strong metal-substrate interaction effect, an atomic-level catalyst design strategy to construct Pt-S3 single atom on ZnIn2S4 nanosheets (PtSA-ZIS) is demonstrated. As active center with optimized H adsorption energy to facilitate H2 evolution reaction, the unique Pt single atom also donates electrons to its neighboring S atoms with electron-enriched sites formed to activate the O─H bond in *CH3CHOH and promote the desorption of *CH3CHO. Thus, the synergy between Pt single atom and ZIS together will reduce the energy barrier for the ethanol oxidization to acetaldehyde, and also narrow the spatial distance for proton mass transfer. These features enable PtSA-ZIS photocatalyst to produce acetaldehyde with a selectivity of ≈100%, which will spontaneously transform into 1,1-diethoxyethane via acetalization to avoid volatilization. Meanwhile, a remarkable H2 evolution rate (184.4 µmol h-1) is achieved with a high apparent quantum efficiency of 10.50% at 400 nm.

Enabling alcohol as a hydrogen carrier using metal-organic framework-stabilized Ir-Sc bifunctional catalytic sites

Alcohols are attractive portable chemical carriers of hydrogen thanks to their reversible dehydrogenation, but the hydrogen release reaction is thermodynamically unfavorable. Coupling the alcohol dehydrogenation to acetal formation can shift the reaction thermodynamics for hydrogen production. Here, we stabilized Ir³⁺ and Sc³⁺ in a metal-organic framework (MOF) for tandem catalysis. The Ir³⁺ center bearing an α-hydroxybipyridine ligand catalyzes alcohol dehydrogenation, and the Sc³⁺ Lewis acid site catalyzes acetal formation that allows further dehydrogenation to form esters. The bifunctional UiO-bpyOH-IrCp-Sc catalyst effectively converts ethylene glycol to ester and H₂ without producing CO.

Nanoscale Assembly of CdS/BiVO4 Hybrids for Coupling Selective Fine Chemical Synthesis and Hydrogen Production under Visible Light

Simultaneously utilizing photogenerated electrons and holes in one photocatalytic system to synthesize value-added chemicals and clean hydrogen (H₂) energy meets the development requirements of green chemistry. Herein, we report a binary material of CdS/BiVO₄ combining one-dimensional (1D) CdS nanorods (NRs) with two-dimensional (2D) BiVO₄ nanosheets (NSs) constructed through a facile electrostatic self-assembly procedure for the selectively photocatalytic oxidation of aromatic alcohols integrated with H₂ production, which exhibits significantly enhanced photocatalytic performance. Within 2 h, the conversion of aromatic alcohols over CdS/BiVO₄-25 was approximately 9-fold and 40-fold higher than that over pure CdS and BiVO₄, respectively. The remarkably improved photoactivity of CdS/BiVO₄ hybrids is mainly ascribed to the Z-scheme charge separation mechanism in the 1D/2D heterostructure derived from the interface contact between CdS and BiVO₄, which not only facilitates the separation and transfer of charge carriers, but also maintains the strong reducibility of photogenerated electrons and strong oxidizability of photogenerated holes. It is anticipated that this work will further stimulate interest in the rational design of 1D/2D Z-scheme heterostructure photocatalysts for the selective fine chemical synthesis integrated with H₂ evolution.

Selective Photocatalytic Activation of Ethanol C-H and O-H Bonds over Multi-Au@SiO2/TiO2: Role of Catalyst Surface Structure and Reaction Kinetics

The chemical bond diversity and flexible reactivity of biomass-derived ethanol make it a vital feedstock for the production of value-added chemicals but result in low conversion selectivity. Herein, composite catalysts comprising SiO₂-coated single- or multiparticle Au cores hybridized with TiO₂ nanoparticles (mono- or multi-Au@SiO₂/TiO₂, respectively) were fabricated via electrostatic self-assembly. The C-H and O-H bonds of ethanol were selectively activated (by SiO₂ and TiO₂, respectively) under irradiation to form CH₃CH^•(OH) or CH₃CH₂O^• radicals, respectively. The formation and depletion kinetics of these radicals was analyzed by electron spin resonance to reveal marked differences between mono- and multi-Au@SiO₂/TiO₂. Consequently, the selectivity of these catalysts for 1,1-diethoxyethane after 6 h irradiation was determined as 81 and 99%, respectively, which was attributed to the more pronounced effect of localized surface plasmon resonance for multi-Au@SiO₂/TiO₂. Notably, only acetaldehyde was formed on a Au/TiO₂ catalyst without a SiO₂ shell. Fourier transform infrared (FTIR) spectroscopy indicated that the C-H adsorption of ethanol was enhanced in the case of multi-Au@SiO₂/TiO₂, while NH₃ temperature-programmed desorption and pyridine adsorption FTIR spectroscopy revealed that multi-Au@SiO₂/TiO₂ exhibited enhanced surface acidity. Collectively, the results of experimental and theoretical analyses indicated that the adsorption of acetaldehyde on multi-Au@SiO₂/TiO₂ was stronger than that on Au/TiO₂, which resulted in the oxidative coupling of ethanol to afford 1,1-diethoxyethane on the former and the dehydrogenation of ethanol to acetaldehyde on the latter.

Upgrading of Ethanol to 1,1-Diethoxyethane by Proton-Exchange Membrane Electrolysis

The direct acetalization of ethanol is a significant challenge for upgrading bioethanol to value-added chemicals. In this study, 1,1-diethoxyethane (DEE) is selectively synthesized by the electrolysis of ethanol using a proton-exchange membrane (PEM) reactor. In the PEM reactor, a Pt/C catalyst promoted the electro-oxidation of ethanol to acetaldehyde. The Nafion membrane used as the PEM served as a solid acid catalyst for the acetalization of ethanol and electrochemically formed acetaldehyde. DEE was obtained at high faradaic efficiency (78 %) through sequential electrochemical and nonelectrochemical reactions. The DEE formation rate through PEM electrolysis was higher than that of reported systems. At the cathode, protons extracted from ethanol were reduced to H₂ . The electrochemical approach can be utilized as a sustainable process for upgrading bioethanol to chemicals because it can use renewable electricity and does not require chemical reagents (e. g., oxidants and electrolytes).

Selective Chloride-Mediated Neat Ethanol Oxidation to 1,1-Diethoxyethane via an Electrochemically Generated Ethyl Hypochlorite Intermediate

Selective primary alcohol oxidation to form aldehydes products without overoxidation to carboxylic acids remains a key chemistry challenge. Using simple alkylammonium chloride as the electrolyte with a glassy carbon working electrode in neat ethanol solvent, 1,1-diethoxyethane (DEE) was prepared with >95% faradaic efficiency (FE). DEE serves as a storage platform protecting acetaldehyde from overoxidation and volatilization. UV-vis spectroscopy shows that the reaction proceeds through an ethyl hypochlorite intermediate as the sole chloride oxidation product, and that this intermediate decomposes unimolecularly (rate constant k = (6.896 ± 0.516) × 10^-4 s^-1) to form HCl catalyst and acetaldehyde, which undergoes rapid nucleophilic attack by ethanol solvent to form the DEE product. This indirect oxidation mechanism enables ethanol oxidation at much less positive potentials due to the fast kinetics for chloride anion oxidation.

Cooperative Coupling of Oxidative Organic Synthesis and Hydrogen Production over Semiconductor-Based Photocatalysts

Merging hydrogen (H₂) evolution with oxidative organic synthesis in a semiconductor-mediated photoredox reaction is extremely attractive because the clean H₂ fuel and high-value chemicals can be coproduced under mild conditions using light as the sole energy input. Following this dual-functional photocatalytic strategy, a dreamlike reaction pathway for constructing C-C/C-X (X = C, N, O, S) bonds from abundant and readily available X-H bond-containing compounds with concomitant release of H₂ can be readily fulfilled without the need of external chemical reagents, thus offering a green and fascinating organic synthetic strategy. In this review, we begin by presenting a concise overview on the general background of traditional photocatalytic H₂ production and then focus on the fundamental principles of cooperative photoredox coupling of selective organic synthesis and H₂ production by simultaneous utilization of photoexcited electrons and holes over semiconductor-based catalysts to meet the economic and sustainability goal. Thereafter, we put dedicated emphasis on recent key progress of cooperative photoredox coupling of H₂ production and various selective organic transformations, including selective alcohol oxidation, selective methane conversion, amines oxidative coupling, oxidative cross-coupling, cyclic alkanes dehydrogenation, reforming of lignocellulosic biomass, and so on. Finally, the remaining challenges and future perspectives in this flourishing area have been critically discussed. It is anticipated that this review will provide enlightening guidance on the rational design of such dual-functional photoredox reaction system, thereby stimulating the development of economical and environmentally benign solar fuel generation and organic synthesis of value-added fine chemicals.

A new Ni-diaminoglyoxime-g-C3N4 complex towards efficient photocatalytic ethanol splitting via a ligand-to-metal charge transfer (LMCT) mechanism

We report a novel Ni-diaminoglyoxime-g-C₃N₄ (Ni-DAG-CN) complex for H₂ evolution through photocatalytic ethanol splitting. Compared to that of pristine g-C₃N₄, Ni-DAG-CN exhibits a 21-fold enhancement of photocatalytic activity (296.1 μmol h^-1 g^-1) under irradiation with excellent stability. The enhanced photocatalytic activity can be attributed to a proposed ligand-to-metal charge transfer (LMCT) mechanism, which is illustrated both experimentally and theoretically. This work provides great potential in the future design of low-cost, high-performance photocatalysts for H₂ evolution from alcohol splitting.

Fabrication of a novel Ni3N/Ni4N heterojunction as a non-noble metal co-catalyst to boost the H2 evolution efficiency of Zn0.5Cd0.5S

Ni_xN/Zn_0.5Cd_0.5S composites displayed better photocatalytic hydrogen production from water in comparison with pristine Zn_0.5Cd_0.5S (ZCS), as well as Pt/ZCS and Ni₃N/ZCS.

Topological Formation of a Mo-Ni-Based Hollow Structure as a Highly Efficient Electrocatalyst for the Hydrogen Evolution Reaction in Alkaline Solutions

A Mo-Ni alloy has been demonstrated to be a benchmark noble-metal-free catalyst for the hydrogen evolution reaction (HER) in alkaline solutions. Nevertheless, further improvement on its catalytic activity is desired to meet industrial requirements. In this study, Mo-Ni-based hollow structures (MoNi-HS), backboned by MoO_{3- x} nanosheets and decorated with metallic MoNi₄ nanoparticles, were obtained via a topological transformation process by annealing MoNi-oxide hollow precursors in a reducing atmosphere. This hollow structure allowed for a large proportion of catalytic surface exposed in the electrolyte, leading to highly efficient utilization of active sites in the catalyst. As a result, robust catalytic activity toward HER was recorded in 1 M KOH electrolyte: a low overpotential of 38 mV to deliver a current density of 10 mA/cm² and a very small Tafel slope of 31.4 mV per dec. Such a remarkable performance of MoNi-HS even outperformed the catalytic activity of the commercial Pt/C electrocatalyst, addressing an effective strategy to promote the catalytic performance of noble-metal-free catalysts.