Supramolecular Self-Sorting Networks using Hydrogen-Bonding Motifs

Visible-Light Driven Control Over Triply and Quadruply Hydrogen-Bonded Supramolecular Assemblies

Supramolecular polymers offer tremendous potential to produce new "smart" materials, however, there remains a need to develop systems that are responsive to external stimuli. In this work, visible-light responsive hydrogen-bonded supramolecular polymers comprising photoresponsive supramolecular synthons (I-III) consisting of two hydrogen bonding motifs (HBMs) connected by a central ortho-tetrafluorinated azobenzene have been characterized by DOSY NMR and viscometry. Comparison of different hydrogen-bonding motifs reveals that assembly in the low and high concentration regimes is strongly influenced by the strength of association between the HBMs. I, Incorporating a triply hydrogen-bonded heterodimer, was found to exhibit concentration dependent switching between a monomeric pseudo-cycle and supramolecular oligomer through intermolecular hydrogen bonding interactions between the HBMs. II, Based on the same photoresponsive scaffold, and incorporating a quadruply hydrogen-bonded homodimer was found to form a supramolecular polymer which was dependent upon the ring-chain equilibrium and thus dependent upon both concentration and photochemical stimulus. Finally, III, incorporating a quadruply hydrogen-bonded heterodimer represents the first photoswitchable AB type hydrogen-bonded supramolecular polymer. Depending on the concentration and photostationary state, four different assemblies dominate for both monomers II and III, demonstrating the ability to control supramolecular assembly and physical properties triggered by light.

Direct Detection of Hydrogen Bonds in Supramolecular Systems Using 1H-15N Heteronuclear Multiple Quantum Coherence Spectroscopy

Hydrogen-bonded supramolecular systems are usually characterized in solution through analysis of NMR data such as complexation-induced shifts and nuclear Overhauser effects (nOe). Routine direct detection of hydrogen bonding particularly in multicomponent mixtures, even with the aid of 2D NMR experiments for full assignment, is more challenging. We describe an elementary rapid ¹H-¹⁵N HMQC NMR experiment which addresses these challenges without the need for complex pulse sequences. Under readily accessible conditions (243/263 K, 50 mM solutions) and natural ¹⁵N abundance, unambiguous assignment of ¹⁵N resonances facilitates direct detection of intra- and intermolecular hydrogen bonds in mechanically interlocked structures and quadruply hydrogen-bonded dimers─of dialkylaminoureidopyrimidinones, ureidopyrimidinones, and diamidonaphthyridines─in single or multicomponent mixtures to establish tautomeric configuration, conformation, and, to resolve self-sorted speciation.

Self-Sorting Governed by Chelate Cooperativity

Self-sorting phenomena are the basis of manifold relevant (bio)chemical processes where a set of molecules is able to interact with no interference from other sets and are ruled by a number of codes that are programmed in molecular structures. In this work, we study, the relevance of chelate cooperativity as a code for achieving high self-sorting fidelities. In particular, we establish qualitative and quantitative relationships between the cooperativity of a cyclic system and the self-sorting fidelity when combined with other molecules that share identical geometry and/or binding interactions. We demonstrate that only systems displaying sufficiently strong chelate cooperativity can achieve quantitative narcissistic self-sorting fidelities either by dictating the distribution of cyclic species in complex mixtures or by ruling the competition between the intra- and intermolecular versions of a noncovalent interaction.

Halogen bonding regulated functional nanomaterials

Non-covalent interactions have gained increasing attention for use as a driving force to fabricate various supramolecular architectures, exhibiting great potential in crystal and materials engineering and supramolecular chemistry. As one of the most powerful non-covalent bonds, the halogen bond has recently received increasing attention in functional nanomaterial design. The present review describes the latest studies based on halogen bonding induced self-assembly and its applications. Due to the high directionality and controllable interaction strength, halogen bonding can provide a facile platform for the design and synthesis of a myriad of nanomaterials. In addition, both the fundamental aspects and the real engineering applications are discussed, which encompass molecular recognition and sensing, organocatalysis, and controllable multifunctional materials and surfaces.

A Molecular Replication Process Drives Supramolecular Polymerization

Supramolecular polymers are materials in which the connections between monomers in the polymer main chain are non-covalent bonds. This area has seen rapid expansion in the last two decades and has been exploited in several applications. However, suitable contiguous hydrogen-bond arrays can be difficult to synthesize, placing some limitations on the deployment of supramolecular polymers. We have designed a hydrogen-bonded polymer assembled from a bifunctional monomer composed of two replicating templates separated by a rigid spacer. This design allows the autocatalytic formation of the polymer main chain through the self-templating properties of the replicators and drives the synthesis of the bifunctional monomer from its constituent components in solution. The template-directed 1,3-dipolar cycloaddition reaction between nitrone and maleimide proceeds with high diastereoselectivity, affording the bifunctional monomer. The high binding affinity between the self-complementary replicating templates that allows the bifunctional monomer to polymerize in solution is derived from the positive cooperativity associated with this binding process. The assembly of the polymer in solution has been investigated by diffusion-ordered NMR spectroscopy. Both microcrystalline and thin films of the polymeric material can be prepared readily and have been characterized by powder X-ray diffraction and scanning electron microscopy. These results demonstrate that the approach described here is a valid one for the construction of supramolecular polymers and can be extended to systems where the rigid spacer between the replicating templates is replaced by one carrying additional function.

Towards photoswitchable quadruple hydrogen bonds via a reversible "photolocking" strategy for photocontrolled self-assembly

Developing new photoswitchable noncovalent interaction motifs with controllable bonding affinity is crucial for the construction of photoresponsive supramolecular systems and materials. Here we describe a unique "photolocking" strategy for realizing photoswitchable control of quadruple hydrogen-bonding interactions on the basis of modifying the ureidopyrimidinone (UPy) module with an ortho-ester substituted azobenzene unit as the "photo-lock". Upon light irradiation, the obtained Azo-UPy motif is capable of unlocking/locking the partial H-bonding sites of the UPy unit, leading to photoswitching between homo- and heteroquadruple hydrogen-bonded dimers, which has been further applied for the fabrication of novel tunable hydrogen bonded supramolecular systems. This "photolocking" strategy appears to be broadly applicable in the rational design and construction of other H-bonding motifs with sufficiently photoswitchable noncovalent interactions.

Tuning the Binding Strength of Even and Uneven Hydrogen-Bonded Arrays with Remote Substituents

We investigated the tunability of hydrogen bond strength by altering the charge accumulation around the frontier atoms with remote substituents. For pyridine···H2O with NH2 and CN substituted at different positions on pyridine, we find that the electron-withdrawing CN group decreases the negative charge accumulation around the frontier atom N, resulting in weakening of the hydrogen bond, whereas the electron-donating NH2 group increases the charge accumulation around N, resulting in strengthening of the hydrogen bond. By applying these design principles on DDAA-AADD, DADA-ADAD, DAA-ADD, and ADA-DAD hydrogen-bonded dimers, we find that the effect of the substituent is delocalized over the whole molecular system. As a consequence, systems with an equal number of hydrogen bond donor (D) and acceptor (A) atoms are not tunable in a predictable way because of cancellation of counteracting strengthening and weakening effects. Furthermore, we show that the position of the substituent and long-range electrostatics can play an important role as well. Overall, the design principles presented in this work are suitable for monomers with an unequal number of donor and acceptor atoms and can be exploited to tune the binding strength of supramolecular building blocks.

Redox-Responsive H-Bonding: Amplifying the Effect of Electron Transfer Using Proton-Coupled Electron Transfer

A new strategy to create highly redox-responsive H-bond dimers based on proton-coupled electron transfer is proposed that capitalizes on the importance of secondary H-bonds in determining overall binding strength in H-bond dimers. Electron transfer induced proton transfer across a H-bond can be used to significantly strengthen the overall binding by both creating strong ionic H-bonds and changing the secondary H-bonds from unfavorable to favorable. The viability and potency of this approach are demonstrated with an electroactive DAD (A = H-acceptor, D = H-donor) array, H(MQ⁺)H, paired with an electroinactive ADA array, O(NH)O. NMR titration of H(MQ⁺)H with O(NH)O in 0.1 M NBu₄PF₆/CD₂Cl₂ gives a K_assoc of 500 M^-1, typical of DAD-ADA dimers. However, upon two-electron reduction in 0.1 M NBu₄PF₆/CH₂Cl₂, cyclic voltammetry studies indicate a 1.8 × 10⁵ increase in binding strength, corresponding to a very large K_assoc of 9 × 10⁷ M^-1. The latter value is typical of DDD-AAA H-bond dimers, consistent with proton transfer across the central H-bond upon reduction.

A pH-Switchable Triple Hydrogen-Bonding Motif

A stimuli responsive linear hydrogen bonding motif, capable of in situ protonation and deprotonation, has been investigated. The interactions of the responsive hydrogen bonding motif with complementary partners were examined through a series of 1H NMR experiments, revealing that the recognition preference of the responsive hydrogen bonding motif in a mixture can be switched between two states.

Assembly of miscible supramolecular network blends using DDA·AAD hydrogen-bonding interactions of pendent side-chains

Miscible blends of poly(methyl methacrylate) and polystyrene polymers are assembled through triple hydrogen bonding between complementary ureidoimidazole and amidoisocytosine heterodimers.

Mutualistic benefit in the self-sorted co-aggregates of peri-naphthoindigo and a 4-amino-1,8-naphthalimide derivative

Photoluminescence enhancement for all the members of a self-sorted co-aggregate was observed for the first time by successfully amalgamating AIEE and social self-sorting. Intermolecular H-bonding and π-π stacking were utilised to prepare several co-aggregates of peri-naphthoindigo (PNI) and a 4-amino-1,8-naphthalimide derivative dye, NH₂-NMI. In the heteromeric aggregates, photoluminescence intensities were increased by 28% for the imide and more than 400% for PNI. Due to spectral overlap between the emission of the imide and the absorption of PNI, energy transfer took place from the former to the latter. The heteromeric aggregates are dual emissive and the relative intensities of the emissions can easily be tuned by varying the stoichiometry of the dyes.

Supramolecular Self-Sorting Networks using Hydrogen-Bonding Motifs

A current objective in supramolecular chemistry is to mimic the transitions between complex self-sorted systems that represent a hallmark of regulatory function in nature. In this work, a self-sorting network, comprising linear hydrogen motifs, was created. Selecting six hydrogen-bonding motifs capable of both high-fidelity and promiscuous molecular recognition gave rise to a complex self-sorting system, which included motifs capable of both narcissistic and social self-sorting. Examination of the interactions between individual components, experimentally and computationally, provided a rationale for the product distribution during each phase of a cascade. This reasoning holds through up to five sequential additions of six building blocks, resulting in the construction of a biomimetic network in which the presence or absence of different components provides multiple unique pathways to distinct self-sorted configurations.