Facile Preparation of Snowflake-Like MnO2 @NiCo2 O4 Composites for Highly Efficient Electromagnetic Wave Absorption

Bimetallic nanocubes embedded in biomass-derived porous carbon to construct magnetic/carbon dual-mechanism layered structures for efficient microwave absorption

Biomass-derived porous carbon materials have great potential for the development of lightweight and efficient broadband microwave absorbers. In this study, we reported the successful immobilization of Co3O4/CoFe2O4 nanocubes on porous carbon derived from ginkgo biloba shells by activated carbonization and electrostatic self-assembly processes. The optimal reflection loss value of the prepared BPC@Co3O4/CoFe2O4 reaches -68.5 dB when the filling load is 10 wt%, and the effective absorption bandwidth is 6.2 GHz with a matching thickness of 2 mm. The excellent microwave absorption (MA) performance is attributed to the rational three-dimensional structural design, the modulation of magnetic/carbon components, the optimized impedance matching, and the coordinated action of multiple mechanisms. It was further demonstrated by high-frequency structural simulation that the composite can effectively dissipate microwave energy in practical applications. Therefore, the results indicate a favorable potential of the synthesis and application of semiconductor/magnetic component/biomass-derived carbon microwave absorbing materials.

Construct of CoZnO/CSP biomass-derived carbon composites with broad effective absorption bandwidth of 7.2 GHz and excellent microwave absorption performance

Biomass-carbon materials have excellent electromagnetic wave attenuation properties, which is one of the essential factors for developing ultra-thin matched-thickness, and high-performance microwave absorption materials. This study reports a two-step procedure consisting of carbonization and subsequent in-situ growth for preparing a wrinkle-like multilayer biomass-derived composites with magnetic Co particles and ZnO particles (CoZnO/C-X). The synergistic effect of a wrinkle-like multilayer structure and Co and ZnO particles, as well as the existence of many heterogeneous interfaces in the composites structure, and efficiently creates multiple scattering and reflections, which gives the composites the strong microwave absorption properties. The minimum reflection loss value (RL_min) of CoZnO/C-X reaches - 54.90 dB with a thickness of 1.8 mm, and the effective absorption bandwidth (lower than - 10 dB) is 7.2 GHz covering from 10.8 GHz to18.0 GHz with matching thickness of 2.0 mm. Furthermore, the reasonable dielectric/magnetic losses, optimized impedance matching and enhanced polarization loss play an indispensable role among improving microwave absorption performance. Thus, this result provides a good potential method for preparation of magnetic particle/metal oxide/biomass-derived carbon microwave absorbing structural materials.

Facile synthesis of a 2D multilayer core–shell MnO2@LDH@MMT composite with a nanoflower shape for electromagnetic wave absorption

Manganese dioxide@NiFe layered double hydroxide@montmorillonite (MNFM) with a nanoflower-like two-dimensional layered core–shell construction has been successfully synthesized by a two-step hydrothermal method.

Size-controllable porous flower-like NiCo2O4 fabricated via sodium tartrate assisted hydrothermal synthesis for lightweight electromagnetic absorber

Although the performance of NiCo₂O₄-based absorbers with multiple components has made great progress, the property of pure NiCo₂O₄ is still far from the requirements of high-performance electromagnetic wave absorbers. It is recognized that morphology control is an effective strategy to improve electromagnetic absorbing capacity of absorbers. Herein, this work reported the fabrication of porous flower-like pure NiCo₂O₄ via simple hydrothermal reaction with the assistant of sodium tartarate in where tartaric acid served as a structure-directing agent. It was demonstrated that size distribution and electromagnetic absorbing capacity of the obtained NiCo₂O₄ could be modulated easily by controlling addition of sodium tartrate. It was verified that dipole polarization originated from lattice defect and oxygen vacancy as well as interfacial polarization ascribing to adjacent and interconnected flakes are responsible for the excellent electromagnetic absorbing performance. The obtained porous flower-like NiCo₂O₄ exhibited broad absorption bandwidth at thin thickness as well as proper dissipation ability. This work offers a new strategy to fabricate size-controllable porous flower-like NiCo₂O₄ electromagnetic absorber. It is believed the obtained NiCo₂O₄ will be a promising candidate as a lightweight electromagnetic absorbing material.

Defect Induced Polarization Loss in Multi-Shelled Spinel Hollow Spheres for Electromagnetic Wave Absorption Application

Defect engineering is an effective approach to manipulate electromagnetic (EM) parameters and enhance absorption ability, but defect induced dielectric loss dominant mechanism has not been completely clarified. Here the defect induced dielectric loss dominant mechanism in virtue of multi-shelled spinel hollow sphere for the first time is demonstrated. The unique but identical morphology design as well as suitable composition modulation for serial spinels can exclude the disturbance of EM wave dissipation from dipolar/interfacial polarization and conduction loss. In temperature-regulated defect in NiCo2O4 serial materials, two kinds of defects, defect in spinel structure and oxygen vacancy are detected. Defect in spinel structure played more profound role on determining materials' EM wave dissipation than that of oxygen vacancy. When evaluated serial Co-based materials as absorbers, defect induced polarization loss is responsible for the superior absorption performance of NiCo2O4-based material due to its more defect sites in spinel structure. It is discovered that electron spin resonance test may be adopted as a novel approach to directly probe EM wave absorption capacities of materials. This work not only provides a strategy to prepare lightweight, efficient EM wave absorber but also illustrates the importance of defect engineering on regulation of materials' dielectric loss capacity.

Metal-organic framework derived hollow CoFe@C composites by the tunable chemical composition for efficient microwave absorption

Controlling the composition and microstructure of nanomaterials is still a significant challenge in developing high-performance microwave absorption (MA) materials. Herein, metal-organic framework (MOF)-derived hollow CoFe@C nanoboxes are designed and prepared through the facile regulating the mass ratios of ZIF-67/PFC and a thermal annealing treatment. The CoFe@C composite can achieve an excellent MA performance, which have two high reflection loss (RL) values at different thickness. A RL value of -31.0 dB is obtained at 11.84 GHz with a matching thickness of 2.4 mm, and a RL value can reach -44.1 dB (4.08 GHz) at a matching thickness of 5.8 mm, and a correspondingly wide absorbing bandwidth (5.20 GHz, from 9.7 to 14.9 GHz) is simultaneously obtained at a matching thickness of 2.3 mm. The magnetic loss, interfacial polarization and hollow structure are the main reasons for their excellent MA capability. This work provides a research idea for the development of the efficient MOF-based MA materials in practical application.

MnO2 -Based Materials for Environmental Applications

Manganese dioxide (MnO₂ ) is a promising photo-thermo-electric-responsive semiconductor material for environmental applications, owing to its various favorable properties. However, the unsatisfactory environmental purification efficiency of this material has limited its further applications. Fortunately, in the last few years, significant efforts have been undertaken for improving the environmental purification efficiency of this material and understanding its underlying mechanism. Here, the aim is to summarize the recent experimental and computational research progress in the modification of MnO₂ single species by morphology control, structure construction, facet engineering, and element doping. Moreover, the design and fabrication of MnO₂ -based composites via the construction of homojunctions and MnO₂ /semiconductor/conductor binary/ternary heterojunctions is discussed. Their applications in environmental purification systems, either as an adsorbent material for removing heavy metals, dyes, and microwave (MW) pollution, or as a thermal catalyst, photocatalyst, and electrocatalyst for the degradation of pollutants (water and gas, organic and inorganic) are also highlighted. Finally, the research gaps are summarized and a perspective on the challenges and the direction of future research in nanostructured MnO₂ -based materials in the field of environmental applications is presented. Therefore, basic guidance for rational design and fabrication of high-efficiency MnO₂ -based materials for comprehensive environmental applications is provided.

Synthesis and Characterization of a NiCo2O4@NiCo2O4 Hierarchical Mesoporous Nanoflake Electrode for Supercapacitor Applications

In this study, we synthesized binder-free NiCo₂O₄@NiCo₂O₄ nanostructured materials on nickel foam (NF) by combined hydrothermal and cyclic voltammetry deposition techniques followed by calcination at 350 °C to attain high-performance supercapacitors. The hierarchical porous NiCo₂O₄@NiCo₂O₄ structure, facilitating faster mass transport, exhibited good cycling stability of 83.6% after 5000 cycles and outstanding specific capacitance of 1398.73 F g⁻¹ at the current density of 2 A·g⁻¹, signifying its potential for energy storage applications. A solid-state supercapacitor was fabricated with the NiCo₂O₄@NiCo₂O₄ on NF as the positive electrode and the active carbon (AC) was deposited on NF as the negative electrode, delivering a high energy density of 46.46 Wh kg⁻¹ at the power density of 269.77 W kg⁻¹. This outstanding performance was attributed to its layered morphological characteristics. This study explored the potential application of cyclic voltammetry depositions in preparing binder-free NiCo₂O₄@NiCo₂O₄ materials with more uniform architecture for energy storage, in contrast to the traditional galvanostatic deposition methods.

Self-Assembled 3D Flower-like Composites of Heterobimetallic Phosphides and Carbon for Temperature-Tailored Electromagnetic Wave Absorption

Bimetallic cobalt-nickel phosphides as a microwave absorber with a well-defined 3D hierarchical flower-like architecture featuring the ultrathin 2D subunits are very unusual and rarely reported. Herein, for the first time, we successfully prepared 3D flower-like CoNi-P/C composites with 2D nanosheet subunits via a one-pot solvothermal self-assembled strategy followed by a one-step carbonization-phosphorization process. Interestingly, the chemical composition and electromagnetic (EM) wave absorption performance of composites are highly influenced by the calcination temperature. As the calcination temperature increases from 300 to 500 °C, the crystal pattern transformed from CoP with nickel ions uniformly intercalating into the lattice to the CoNiP structure. Comparing with CoNi-P/C-400 and CoNi-P/C-500, the CoNi-P/C-300 sample exhibited an optimal reflection loss (RL) value of -65.5 dB at 12.56 GHz with a thickness of 2.1 mm and an ultralow filler loading of 15 wt %. Furthermore, the fundamental EM wave absorption mechanism was proposed. The synergetic effects of dramatical attenuation ability and well-matched impedance endue CoNi-P/C-300 with superior microwave absorption performance. This work may be enlightening in promoting the development of heterobimetallic phosphides in the wave-absorbing field due to their intrinsic magnetism, higher electrical conductivity, as well as eco-friendly traits.