Ex Tenebris Lux: Illuminating Reactive Oxygen and Nitrogen Species with Small Molecule Probes

Reactive oxygen and nitrogen species are small reactive molecules derived from elements in the air─oxygen and nitrogen. They are produced in biological systems to mediate fundamental aspects of cellular signaling but must be very tightly balanced to prevent indiscriminate damage to biological molecules. Small molecule probes can transmute the specific nature of each reactive oxygen and nitrogen species into an observable luminescent signal (or even an acoustic wave) to offer sensitive and selective imaging in living cells and whole animals. This review focuses specifically on small molecule probes for superoxide, hydrogen peroxide, hypochlorite, nitric oxide, and peroxynitrite that provide a luminescent or photoacoustic signal. Important background information on general photophysical phenomena, common probe designs, mechanisms, and imaging modalities will be provided, and then, probes for each analyte will be thoroughly evaluated. A discussion of the successes of the field will be presented, followed by recommendations for improvement and a future outlook of emerging trends. Our objectives are to provide an informative, useful, and thorough field guide to small molecule probes for reactive oxygen and nitrogen species as well as important context to compare the ecosystem of chemistries and molecular scaffolds that has manifested within the field.

Photo-induced synthesis of polymeric nanoparticles and chemiluminescent degradable materials via flow chemistry

We report the photo-induced, additive-free, continuous synthesis of polymeric particles using flow chemistry. Not only can these particles be formed under ambient conditions in a solely light-induced precipitation polymerisation, they can be prepared via continuous flow techniques to up-scale the synthetic process. We carefully assess the flow chemical parameters and analyse the resulting particles quantitatively using scanning electron microscopy (SEM). Particle formation is a direct result of the step-growth polymerisation via a photochemically induced AA + BB Diels-Alder reaction, which we herein base on the dialdehyde monomer (AA) derived from the sustainable precursor, thymol. By employing a peroxyoxalate bismaleimide (BB), we introduce particles that can be selectively degraded on-demand, self-reported by light emission through chemiluminescence.

Liquid phase detection in the miniature scale. Microfluidic and capillary scale measurement and separation systems. A tutorial review

Microfluidic and capillary devices are increasingly being used in analytical applications while their overall size keeps decreasing. Detection sensitivity for these microdevices gains more importance as device sizes and consequently, sample volumes, decrease. This paper reviews optical, electrochemical, electrical, and mass spectrometric detection methods that are applicable to capillary scale and microfluidic devices, with brief introduction to the principles in each case. Much of this is considered in the context of separations. We do consider theoretical aspects of separations by open tubular liquid chromatography, arguably the most potentially fertile area of separations that has been left fallow largely because of lack of scale-appropriate detection methods. We also examine the theoretical basis of zone electrophoretic separations. Optical detection methods discussed include UV/Vis absorbance, fluorescence, chemiluminescence and refractometry. Amperometry is essentially the only electrochemical detection method used in microsystems. Suppressed conductance and especially contactless conductivity (admittance) detection are in wide use for the detection of ionic analytes. Microfluidic devices, integrated to various mass spectrometers, including ESI-MS, APCI-MS, and MALDI-MS are discussed. We consider the advantages and disadvantages of each detection method and compare the best reported limits of detection in as uniform a format as the available information allows. While this review pays more attention to recent developments, our primary focus has been on the novelty and ingenuity of the approach, regardless of when it was first proposed, as long as it can be potentially relevant to miniature platforms.

Internal Light Sources-Mediated Photodynamic Therapy Nanoplatforms: Hope for the Resolution of the Traditional Penetration Problem

Photodynamic therapy (PDT) is an alternative cancer treatment technique with a noninvasive nature, high selectivity, and minimal adverse effects. The indispensable light source used in PDT is a critical factor in determining the energy conversion of photosensitizers (PSs). Traditional light sources are primarily concentrated in the visible light region, severely limiting their penetration depth and making them prone to scattering and absorption when applied to biological tissues. For that reason, its efficacy in treating deep-seated lesions is often inadequate. Self-exciting PDT, also known as auto-PDT (APDT), is an attractive option for circumventing the limited penetration depth of traditional PDT and has acquired significant attention. APDT employs depth-independent internal light sources to excite PSs through resonance or radiative energy transfer. APDT has considerable potential for treating deep-tissue malignancies. To facilitate many researchers' comprehension of the latest research progress in this field and inspire the emergence of more novel research results. This review introduces internal light generation mechanisms and characteristics and provides an overview of current research progress based on the recently reported APDT nanoplatforms. The current challenges and possible solutions of APDT nanoplatforms are also presented and provide insights for future research in the final section of this article.

Glowstick-inspired smartphone-readable reporters for sensitive, multiplexed lateral flow immunoassays

The COVID-19 pandemic has increased demand for point-of-care (POC) screening tests such as lateral flow assays (LFAs) and highlighted the need for sensitive and cost-effective POC diagnostic platforms. Here, we demonstrate an LFA platform using standard fluorescent nanoparticle reporters in which optical excitation is replaced by chemical excitation using the peroxyoxalate-based chemistry of inexpensive, shelf-stable glowsticks. The one-step chemi-excitation of fluorescent particles produces visible light readable by an unmodified smartphone, enhancing sensitivity while preserving simplicity and cost-effectiveness. Our Glow LFA detected the common model analyte human chorionic gonadotropin with a limit of detection (LoD) of 39 pg/mL-over ten times more sensitive than standard gold nanoparticles using the same antibodies. We also demonstrate its application to the detection of SARS-CoV-2 nucleoprotein at 100 pg/mL in nasal swab extract. Multiple fluorescent dyes can be chemi-excited by a single reagent, allowing for color multiplexing on a single LFA strip with a smartphone camera. The detection of three analytes on a single LFA test line was demonstrated using red, green, and blue fluorescent reporter particles, making glow LFA a promising platform for multiplexed detection.

Novel Near-Infrared Iridium(III) Complex for Chemiluminescence Imaging of Hypochlorous Acid

Chemiluminescence (CL) probes that possess near-infrared (NIR) emission are highly desirable for in vivo imaging due to their deeper tissue penetration ability and intrinsically high sensitivity. Herein, a novel iridium-based CL probe (NIRIr-CL-1) with direct NIR emission was reported as the result of hypochlorous acid (HClO)-initiated oxidative deoximation. To improve its biocompatibility and extend the CL time for in vivo imaging applications, this NIRIr-CL-1 was prepared as a CL nanoparticle probe (NIRIr-CL-1 dots) through encapsulation by an amphiphilic polymer Pluronic F127 (F127). All results demonstrate that the NIRIr-CL-1 dots have good selectivity and sensitivity for visualization of HClO even at the depth of 1.2 cm. Owing to these advantages, the CL imaging of exogenous and endogenous HClO in mice was achieved. This study could provide new insights into the construction of new NIR emission CL probes and expand their applications in biomedical imaging.

High-Contrast Visualization Chemiluminescence Based on AIE-Active and Base-Sensitive Emitters

Peroxyoxalate chemiluminescence (PO-CL) is one of the most popular cold light sources, yet the drawback of aggregation-caused quenching limits their use. Here, we report a new kind of efficient bifunctional emitter derived from salicylic acid, which not only exhibits typical aggregation-induced emission (AIE) character but also has the ability to catalyze the CL process under basic conditions based on base sensitivity. By taking advantage of these unique features, we successfully confine the CL process on the surface of solid bases and provide a high-contrast visualization of CL emission. This method allows most of the common basic salts like sodium carbonate to be invisible encryption information ink and PO-CL solution to be a decryption tool to visualize the hidden information. The current study opens up an appealing way for the development of multifunction CL emitters for information encryption and decryption applications.

Nitrogen- and sulfur-doped graphene quantum dots for chemiluminescence

Graphene quantum dots (GQDs), as one of the most promising luminescent nanomaterials, have been receiving increasing attention in various applications. However, it is still a challenge to improve their chemiluminescence (CL) quantum efficiency. Herein, the CL emissions of nitrogen- and sulfur-doped GQDs (NS-GQDs), nitrogen-doped GQDs (N-GQDs) and undoped GQDs synthesized through one-pot high-temperature pyrolysis are investigated in their chemical reactions with bis(2-carbopentyloxy-3,5,6-trichlorophenyl) oxalate (CPPO) and hydrogen peroxide (H₂O₂). A bright blue emission, and yellowish green and yellowish white light from NS-GQDs, N-GQDs and GQDs can be observed, respectively, in the mixture solutions with CPPO and H₂O₂. For the first time, spooling CL spectroscopy was used to investigate the CL reaction mechanisms, illuminant decays and the absolute CL efficiencies of these three GQD systems. Compared with the same system of undoped GQDs, it has been found that the NS-GQDs not only present slower illuminant decay, but also display an absolute CL quantum efficiency of 0.01%, 5-fold enhancement, due to the increase in N and S doping for a well-defined band gap energy. Moreover, three peak wavelengths attributed to intrinsic emission at 425 nm, aggregation-induced emission (AIE) at 575 nm and S-doped emissive surface states at 820 nm are observed for the first time in the NS-GQD system. The CL spectrum of N-GQDs displays two emission peaks at 395 and 575 nm attributed to intrinsic emission and AIE, whereas the CL spectrum of undoped GQDs demonstrates 500 nm and 600 nm peak wavelengths attributed to core emission and AIE. Absolute CL quantum efficiencies from these emissions at these various peaks can be determined quantitatively. This study provides guidance on tuning the surface states of GQD for more conducive injection of electrons and holes, facilitating the production of CL emission, which is beneficial for promoting the development of optical, bioassay and energy conversion applications.

A novel enzyme-free long-lasting chemiluminescence system based on a luminol functionalized β-cyclodextrin hydrogel for sensitive detection of H2O2 in urine and cells

A novel long-lasting chemiluminescent (CL) hydrogel (β-CD@luminol-Co²⁺) was synthesized by embedding luminol and cobalt ions (Co²⁺) into β-cyclodextrin (β-CD) through non-covalent interactions. Due to its porous structure and viscosity, the synthesized β-CD@luminol-Co²⁺ hydrogel exhibited long-lasting CL properties and can emit light for 12 h under both alkaline and neutral conditions. In addition, the CL intensities of β-CD@luminol-Co²⁺ were linear with the logarithm of the hydrogen peroxide (H₂O₂) concentration in the range of 1.0 × 10^-11-1.0 × 10^-7 M, and the limit of detection (LOD) was 0.63 × 10^-11 M and 0.85 × 10^-11 M under alkaline and neutral conditions, respectively. On this basis, an enzyme-free CL sensor based on β-CD@luminol-Co²⁺ was fabricated for the sensitive detection of H₂O₂ in human urine samples under alkaline conditions, and showed good accuracy and recovery. Since β-CD@luminol-Co²⁺ showed good CL properties under neutral conditions, it can be applied to detect H₂O₂ in cells. In order to prolong the emission wavelength of β-CD@luminol-Co²⁺ for better cell imaging, β-CD@luminol-FL-Co²⁺ was prepared by adding fluorescein (FL) to β-CD@luminol-Co²⁺. The as-prepared β-CD@luminol-FL-Co²⁺ also displayed long-lasting CL properties and showed a linear relationship with H₂O₂ concentrations. In addition, the maximum emission wavelength of β-CD@luminol-FL-Co²⁺ was 520 nm, which was red-shifted by 95 nm compared with β-CD@luminol-Co²⁺. The methyl thiazolyl tetrazolium (MTT) assay results and confocal microscopy images illustrated that β-CD@luminol-FL-Co²⁺ had low toxicity and can be taken up by A549 cells. Finally, β-CD@luminol-FL-Co²⁺ was successfully applied for CL imaging and detection of intracellular H₂O₂ in A549 cells under neutral conditions. This enzyme-free long-lasting CL system with high sensitivity can also be extended to real-time monitoring of H₂O₂in vivo.

Exploring the Structural Space of Chemiluminescent 1,2-Dioxetanes

Chemiluminescent molecules which emit light in response to a chemical reaction are powerful tools for the detection and measurement of biological analytes and enable the understanding of complex biochemical processes in living systems. Triggerable chemiluminescent 1,2-dioxetanes have been studied and tuned over the past decades to advance quantitative measurement of biological analytes and molecular imaging in live cells and animals. A crucial determinant of success for these 1,2-dioxetane based sensors is their chemical structure, which can be manipulated to achieve desired chemical properties. In this Perspective, we survey the structural space of triggerable 1,2-dioxetane and assess how their design features affect chemiluminescence properties including quantum yield, emission wavelength, and decomposition kinetics. Based on this appraisal, we identify some structural modifications of 1,2-dioxetanes that are ripe for exploration in the context of chemiluminescent biological sensors.

Chemiluminescent polymeric nanoprobes for tumor diagnosis: A mini review

Chemiluminescence (CL), a distinct luminescent process by taking advantage of chemical reactions rather than external light source, has recently attracted considerable research interests due to its high sensitivity and low background signal. The sensitivity and specificity of chemiluminescent signals in complex tumor microenvironment provide a sound basis for accurate detection of tumors. Various chemiluminescent nanoprobes with superior performance have been obtained by structural modification of chemiluminescent units or introduction of fluorescent dyes. In this review, we focused on the recent progress of chemiluminescent polymeric systems based on various chromophore substrates, including luminol, peroxyoxalates, 1, 2-dioxetanes and their derivatives for tumor detecting. And we also emphasized the design strategies, mechanisms and diagnostic applications of representative chemiluminescent polymeric nanoprobes. Finally, the critical challenges and perspectives of chemiluminescent systems usage in tumor diagnosis were also discussed.

Organic persistent luminescence imaging for biomedical applications

Persistent luminescence is a unique visual phenomenon that occurs after cessation of excitation light irradiation or following oxidization of luminescent molecules. The energy stored within the molecule is released in a delayed manner, resulting in luminescence that can be maintained for seconds, minutes, hours, or even days. Organic persistent luminescence materials (OPLMs) are highly robust and their facile modification and assembly into biocompatible nanostructures makes them attractive tools for in vivo bioimaging, whilst offering an alternative to conventional fluorescence imaging materials for biomedical applications. In this review, we give attention to the existing limitations of each class of OPLM-based molecular bioimaging probes based on their luminescence mechanisms, and how recent research progress has driven efforts to circumvent their shortcomings. We discuss the multifunctionality-focused design strategies, and the broad biological application prospects of these molecular probes. Furthermore, we provide insights into the next generation of OPLMs being developed for bioimaging techniques.

Development of a selective fluorescence derivatization strategy for thyroid hormones based on the Sonogashira coupling reaction

A new fluorescence derivatization technique for the determination of the thyroid hormones, 3,3',5-triiodo-L-thyronine (T₃, triiodothyronine) and 3,3',5,5'-tetraiodo-L-thyronine (T₄, L-thyroxine), in human serum was developed based on the Sonogashira coupling reaction. This derivatization reaction was recently utilized by our research group as a promising solution for the derivatization of ortho-substituted aryl halides that suffer from steric hindrance. T₃ and T₄ possess amino groups that could be derivatized by many reagents; however, these reagents are not useful in the case of biological analysis as they could non-selectively react with many biogenic amines and amino acids. Thus, herein we aimed at labeling the iodo-phenyl group of T₃ and T₄ as a selective fluorescence labeling approach suitable for biological analysis. The fluorescent alkyne, 2-(4-ethynylphenyl)-4,5-diphenyl-1H-imidazole (DIB-ET), can label the ortho-substituted aryl halides T₃ and T₄ in the presence of palladium and copper as catalysts, overcoming the steric hindrance of ortho-substitution. Furthermore, the application of the proposed method for the selective analysis of T₃ and T₄ in biological samples was successfully performed even in the presence of numerous biological components. The formed fluorescent derivatives produced from the reaction of DIB-ET and T₃ and T₄ could be determined by an HPLC system with fluorescence detection. The proposed method was successfully applied for the selective and sensitive determination of T₃ and T₄ in human serum with detection limits (S/N = 3) of 4.0 and 6.1 ng/mL and the recovery rate in the ranges of 84.3-92.1% and 81.3-84.9%, respectively. Therefore, the proposed method could be used as a new simple tool for the simultaneous determination of T₃ and T₄ in biological samples.

Chemiluminescence resonance energy transfer determination of uric acid with fluorescent covalent organic framework as energy acceptor

A simple and feasible strategy was developed for the preparation of fluorescent covalent organic frameworks (COFs) TpPa-1@FL. The TpPa-1-1@FL was prepared via a self-assembly strategy by soaking non-fluorescent COFs TpPa-1 into strong fluorescent fluorescein (FL) solution. A chemiluminescence resonance energy transfer (CRET) system was constructed by the combination strong fluorescent TpPa-1@FL with TCPO-hydrogen peroxide (H₂O₂) reaction. The chemiluminescence (CL) signal of the system was further improved by the addition of bovine serum albumin (BSA). The CRET system can determine H₂O₂ with a linear range response from 5.0 µmol/L to 20.0 mmol/L and a detection limit of 1.1 µmol/L. The CRET system was further exploited for indirect detection of uric acid with coupling of uricase. A good linear relationship was obtained for uric acid in the 10.0-400.0 µmol/L concentration range with a detection limit of 3.8 µmol/L. The practicability of this method was assessed by the determination of uric acid in real samples of human serum and urine.

Chemiluminescent Probes Based on 1,2-dioxetane Structures For Bioimaging

Chemiluminescent probes based on 1,2-dioxetane scaffold are one of the most sensitive imaging modalities for detecting disease-related biomarkers and can obtain more accurate biological information in cells and in vivo . Due to the elimination of external light excitation, the background autofluorescence problem in fluorescence technology can be effectively avoided, providing ultra-high sensitivity and signal-to-noise ratio for various applications. In this minireview, we highlight a comprehensive but concise overview of activatable 1,2-dioetxane-based chemiluminescent probes by reporting significant advances in accurate detection and bioimaging. The design principles and applications for reactive species, enzymes, and other disease-related biomarkers are systematically discussed and summarized. The challenges and potential prospects of chemiluminescent probes are also discussed to further promote the development of new chemiluminescence methods for biological analysis and diagnosis.

State-of-the-art self-luminescence: a win–win situation

The working principles, luminescent mechanisms, versatile integrated approaches and advantages, and future perspectives of AIE-assisted “enhanced” self-luminescence systems are reviewed.

Direct and Indirect Chemiluminescence: Reactions, Mechanisms and Challenges

Emission of light by matter can occur through a variety of mechanisms. When it results from an electronically excited state of a species produced by a chemical reaction, it is called chemiluminescence (CL). The phenomenon can take place both in natural and artificial chemical systems and it has been utilized in a variety of applications. In this review, we aim to revisit some of the latest CL applications based on direct and indirect production modes. The characteristics of the chemical reactions and the underpinning CL mechanisms are thoroughly discussed in view of studies from the very recent bibliography. Different methodologies aiming at higher CL efficiencies are summarized and presented in detail, including CL type and scaffolds used in each study. The CL role in the development of efficient therapeutic platforms is also discussed in relation to the Reactive Oxygen Species (ROS) and singlet oxygen (1O2) produced, as final products. Moreover, recent research results from our team are included regarding the behavior of commonly used photosensitizers upon chemical activation under CL conditions. The CL prospects in imaging, biomimetic organic and radical chemistry, and therapeutics are critically presented in respect to the persisting challenges and limitations of the existing strategies to date.

Cyclic Peroxidic Carbon Dioxide Dimer Fuels Peroxyoxalate Chemiluminescence

Peroxyoxalate chemiluminescence is used in self-contained light sources, such as glow sticks, where oxidation of aromatic oxalate esters produces a high-energy intermediate (HEI) that excites fluorescence dyes via electron transfer chemistry, mimicking bioluminescence for efficient chemical energy-to-light conversion. The identity of the HEI and reasons for the efficiency of the peroxyoxalate reaction remain elusive. We present here unequivocal proof that the HEI of the peroxyoxalate system is a cyclic peroxidic carbon dioxide dimer, namely, 1,2-dioxetanedione. Oxalic peracids bearing a substituted phenyl group were unable to directly excite fluorescent dyes; hence, they could be ruled out as the HEI. However, base-catalyzed cyclization of these species results in bright chemiluminescence, with decay rates and chemiexcitation quantum yields that are influenced by the electronic phenylic substituent properties. Hammett (ρ = +2.2 ± 0.1) and Brønsted (β = -1.1 ± 0.1) constants for the cyclization step preceding chemiexcitation imply that the loss of the phenolate-leaving group and intramolecular nucleophilic attack of the percarboxylate anion occur in a concerted manner, generating 1,2-dioxetanedione as the unique outcome. The presence of better leaving groups influences the reaction mechanism, favoring the chemiluminescent reaction pathway over the nonemissive formation of aryl-1,2-dioxetanones.

Prevent or Cure-The Unprecedented Need for Self-Reporting Materials

Self-reporting smart materials are highly relevant in modern soft matter materials science, as they allow for the autonomous detection of changes in synthetic polymers, materials, and composites. Despite critical advantages of such materials, for example, prolonged lifetime or prevention of disastrous material failures, they have gained much less attention than self-healing materials. However, as diagnosis is critical for any therapy, it is of the utmost importance to report the existence of system changes and their exact location to prevent them from spreading. Thus, we herein critically review the chemistry of self-reporting soft matter materials systems and highlight how current challenges and limitations may be overcome by successfully transferring self-reporting research concepts from the laboratory to the real world. Especially in the space of diagnostic self-reporting systems, the recent SARS-CoV-2 (COVID-19) pandemic indicates an urgent need for such concepts that may be able to detect the presence of viruses or bacteria on and within materials in a self-reporting fashion.

Wavelength-Tunable, Long Lifetime, and Biocompatible Luminescent Nanoparticles Based on a Vitamin E-Derived Material for Inflammation and Tumor Imaging

Luminescence imaging is one of the most effective noninvasive strategies for detection and stratification of inflammation and oxidative stress that are closely related to the pathogenesis of numerous acute and chronic diseases. Herein biocompatible nanoparticles based on a peroxalate ester derived from vitamin E (defined as OVE) are developed. In combination with different fluorophores, OVE can generate luminescence systems with emission wavelengths varying from blue to the near-infrared light in its native and nanoparticle forms, in the presence of hydrogen peroxide (H₂ O₂ ). The OVE-based nanoprobes exhibit high luminescence signals with extremely long lifetime, upon triggering by inflammatory conditions with abnormally elevated H₂ O₂ . Activated neutrophils and macrophages can be illuminated by this type of luminescent nanoprobes, with luminescence intensities positively correlated with inflammatory cell counts. In mouse models of peritonitis, alcoholic liver injury, drug-induced acute liver injury, and acute lung injury, the developed luminescence nanoprobes enable precision imaging of inflammation and disease progression. Moreover, tumors expressing a high level of H₂ O₂ can be shined. Importantly, the OVE-based nanoplatform shows excellent in vitro and in vivo biocompatibility.

Chemiluminescent self-reported unfolding of single-chain nanoparticles

We demonstrate the light-induced, crosslinker mediated collapse of linear polymer chains into single-chain nanoparticles (SCNPs) capable of self-reporting their unfolding. The crosslinker entails a phenyloxalate motif allowing for the targeted degradation of the SCNPs via addition of hydrogen peroxide that triggers chemiluminescence (CL). The time-dependant CL emission can serve as a guide to follow the time dependent unfolding of the SCNPs, allowing for a qualitative assessment of the underlying mechanism.

Water Effect on Peroxyoxalate Kinetics and Mechanism for Oxalic Esters with Distinct Reactivities

The peroxyoxalate reaction is being widely used for various analytical and bioanalytical applications, and however, few mechanistic studies are performed in aqueous media, important mainly for bioanalytical applications, where low chemiluminescence emission quantum yields are obtained. In this sense, we report here kinetic studies on the peroxyoxalate reaction, using two commercially available and widely utilized esters, bis(2,4-dinitrophenyl) oxalate (DNPO) and bis(2,4,6-trichlorophenyl) oxalate (TCPO), in 1,2-dimethoxyethane:water mixtures. The reaction of the much more reactive DNPO, in anhydrous and aqueous media, occurs by a direct nucleophilic attack of H₂ O₂ to the oxalic ester, not involving nucleophilic catalysis by imidazole. Contrary, in the reaction of the less reactive TCPO with H₂ O₂ , imidazole acts mainly as nucleophilic catalyst. For both esters, experimental conditions are established where precise kinetic data and emission quantum yields can be obtained. Interestingly, the quantum yields in 1,2-dimethoxyethane water mixtures increase up to a water concentration of 0.7 mol L^-1 and decrease significantly with higher concentrations.

Ultrasound-Enhanced Self-Exciting Photodynamic Therapy Based on Hypocrellin B

Peroxalate CL as an energy source to excite photosensitizers has attracted tremendous attention in photodynamic therapy (PDT). In this work, peroxyoxalate CPPO and hypocrellin B (HB)-based nanoparticles (CBNPs) for ultrasound (US)-enhanced self-exciting PDT were designed and prepared. CBNPs showed an excellent therapeutic effect against cancer cells with the assistance of US. This US-enhanced-chemiluminescence system avoids the dependence on external light and provides an example for inspiring more effective and precise strategies for cancer treatment.

Two Pyrene-Based Metal-Organic Frameworks for Chemiluminescence

Fluorescent agents play an important role in the peroxyoxalate chemiluminescence system. However, the effect of different frameworks on chemiluminescence (CL) has not been explored. Herein two pyrene-based metal-organic frameworks (MOFs), [Pb₂L]_n·2nDMA·2nH₂O (1) and [(Ca₂L)·(DMF)₃]_n·2.5nDMF·6nH₂O (2) (H₄L = 5,5'-(-pyrene-1,6-diyl)-diisophthalic acid; DMA = N,N'-dimethylacetamide; DMF = N,N'-dimethylformamide), have been successfully synthesized and are applied to CL. They both exhibit strong and lasting emission that is visible to the naked eye and is significantly stronger than that of the ligand. More importantly, compared with 2, 1 has notably better CL performance. We infer that the reason may be that 1 has higher stability and larger open channels, which can avoid the aggregation of organic ligands as well as provide an effective pathway for the active substance to diffuse into the channels.

Untapped toolbox of luminol based polymers

The present state of luminol based polymers is highlighted with the challenges and the respective strategies for the advancement of this versatile class of polymers.

Ultrasound-Enhanced Chemiluminescence for Bioimaging

Tissue imaging has emerged as an important aspect of theragnosis. It is essential not only to evaluate the degree of the disease and thus provide appropriate treatments, but also to monitor the delivery of administered drugs and the subsequent recovery of target tissues. Several techniques including magnetic resonance imaging (MRI), computational tomography (CT), acoustic tomography (AT), biofluorescence (BF) and chemiluminescence (CL), have been developed to reconstruct three-dimensional images of tissues. While imaging has been achieved with adequate spatial resolution for shallow depths, challenges still remain for imaging deep tissues. Energy loss is usually observed when using a magnetic field or traditional ultrasound (US), which leads to a need for more powerful energy input. This may subsequently result in tissue damage. CT requires exposure to radiation and a high dose of contrast agent to be administered for imaging. The BF technique, meanwhile, is affected by strong scattering of light and autofluorescence of tissues. The CL is a more selective and sensitive method as stable luminophores are produced from physiochemical reactions, e.g. with reactive oxygen species. Development of near infrared-emitting luminophores also bring potential for application of CL in deep tissues and whole animal studies. However, traditional CL imaging requires an enhancer to increase the intensity of low-level light emissions, while reducing the scattering of emitted light through turbid tissue environment. There has been interest in the use of focused ultrasound (FUS), which can allow acoustic waves to propagate within tissues and modulate chemiluminescence signals. While light scattering is decreased, the spatial resolution is increased with the assistance of US. In this review, chemiluminescence detection in deep tissues with assistance of FUS will be highlighted to discuss its potential in deep tissue imaging.

Chemiluminescent self-reporting supramolecular transformations on macromolecular scaffolds

We introduce the synthesis of a self-reporting system with chemiluminescent output, which is regulated via dynamic supramolecular complex formation.

Chemiluminescence for bioimaging and therapeutics: recent advances and challenges

The current progress, design principles in bioimaging and therapeutic applications, and future perspectives of various chemiluminescent platforms are reviewed.