Design Approach of Lifetime Extending Thermally Activated Delayed Fluorescence Sensitizers for Highly Efficient Fluorescence Devices

Organic Base-Promoted C-N- and C-O-Coupled Domino Cyclization Strategy: Syntheses of Oxazine-6-ones and 4-Pyrimidinols

Oxazine-6-one and 4-pyrimidinol are two important frameworks in pharmaceutical production. Herein, we disclosed a simple, efficient, inexpensive organic base-promoted and additive-stimulated protocol for the syntheses of variably functionalized oxazine-6-ones and 4-pyrimidinols employing acetonitrile solvent under conventional heating conditions using an oil bath through C-N and C-O coupled domino steps. This simple practicable productive protocol utilizes easily producible cheap precursors, namely, benzimidates or benzamidines, with differently substituted dicyano-olefins, and it comprises step economy, robustness, and moisture insensitive conditions affording high yield that avoids the use of transition-metal catalysts, multistep with multicomponent strategy, and harsh reaction conditions involving hazardous chemicals. This method is scalable into gram-scale production with good yield.

Diindolocarbazole-Based Rigid Donor-Acceptor TADF Molecules for Energy and Electron Transfer Photocatalysis

The design and synthesis of four twisted donor-acceptor (D-A) thermally activated delayed fluorescence (TADF) molecules CBZ-IQ, CBZ-2FIQ, DI-IQ and DI-2FIQ is reported in this work based on diindolocarbazole (DI) and phenyl carbazole as donor and indoloquinoxalines as acceptor. These compounds serve as photocatalysts for organic transformations. Theoretical calculations and experimental data showed reasonable singlet and triplet energy gaps of 0.17-0.26 eV for all compounds. All molecules showed increase in fluorescence quantum yields after degassing the solution and the transient photoluminescence decay showed two components: shorter prompt components (11.4 ns to 31 ns) and longer delayed components (36.4 ns to 1.5 μs) which further indicate the occurrence of TADF process. Cyclic voltammetry studies indicated well-suited excited state redox potentials of all compounds to catalyze organic transformations such as heteroarene arylation. Accordingly, photocatalytic C-H arylation of heteroarenes were performed using these compounds with excellent isolated yields of upto 80 %. Due to their suitable efficient triplet energy levels, all the emitters were also employed as energy transfer photocatalysts in E to Z isomerization of stilbene with the excellent conversion of ~90 %.

Forthcoming hyperfluorescence display technology: relevant factors to achieve high-performance stable organic light emitting diodes

Over the decade, there have been developments in purely organic thermally activated delayed fluorescent (TADF) materials for organic light-emitting diodes (OLEDs). However, achieving narrow full width at half maximum (FWHM) and high external quantum efficiency (EQE) is crucial for real display industries. To overcome these hurdles, hyperfluorescence (HF) technology was proposed for next-generation OLEDs. In this technology, the TADF material was considered a sensitizing host, the so-called TADF sensitized host (TSH), for use of triplet excitons via the reverse intersystem crossing (RISC) pathway. Since most of the TADF materials show bipolar characteristics, electrically generated singlet and triplet exciton energies can be transported to the final fluorescent emitter (FE) through Förster resonance energy transfer (FRET) rather than Dexter energy transfer (DET). This mechanism is possible from the S₁ state of the TSH to the S₁ state of the final fluorescent dopant (FD) as a long-range energy transfer. Considering this, some reports are available based on hyperfluorescence OLEDs, but the detailed analysis for highly efficient and stable devices for commercialization was unclear. So herein, we reviewed the relevant factors based on recent advancements to build a highly efficient and stable hyperfluorescence system. The factors include an energy transfer mechanism based on spectral overlapping, TSH requirements, electroluminescence study based on exciplex and polarity system, shielding effect, DET suppression, and FD orientation. Furthermore, the outlook and future positives with new directions were discussed to build high-performance OLEDs.

Engineering of Cyano Functionalized Benzo[d]imidazol-2-ylidene Ir(III) Phosphors for Blue Organic Light-Emitting Diodes

In this study, we designed and synthesized three series of blue emitting homoleptic iridium(III) phosphors bearing 4-cyano-3-methyl-1-phenyl-6-(trifluoromethyl)-benzo[d]imidazol-2-ylidene (mfcp), 5-cyano-1-methyl-3-phenyl-6-(trifluoromethyl)-benzo[d]imidazol-2-ylidene (ofcp), and 1-(3-(tert-butyl)phenyl)-6-cyano-3-methyl-4-(trifluoromethyl)-benzo[d]imidazol-2-ylidene (5-mfcp) cyclometalates, respectively. These iridium complexes exhibit intense phosphorescence in the high energy region of 435-513 nm in the solution state at RT, to which the relatively large T₁ → S₀ transition dipole moment is beneficial for serving as a pure emitter and an energy donor to the multiresonance thermally activated delayed fluorescence (MR-TADF) terminal emitters via Förster resonance energy transfer (FRET). The resulting OLEDs achieved true blue, narrow bandwidth EL with a max EQE of 16-19% and great suppression of efficiency roll-off with ν-DABNA and t-DABNA. We obtained the FRET efficiency up to 85% using titled Ir(III) phosphors f-Ir(mfcp)₃ and f-Ir(5-mfcp)₃ to achieve true blue narrow bandwidth emission. Importantly, we also provide analysis on the kinetic parameters involved in the energy transfer processes and, accordingly, propose feasible ways to improve the efficiency roll-off caused by the shortened radiative lifetime of hyperphosphorescence.

Narrowband blue emission with insensitivity to the doping concentration from an oxygen-bridged triarylboron-based TADF emitter: nondoped OLEDs with a high external quantum efficiency up to 21.4

Blue thermally activated delayed fluorescence (TADF) emitters that can simultaneously achieve narrowband emission and high efficiency in nondoped organic light-emitting diodes (OLEDs) remain a big challenge. Herein, we successfully design and synthesize two blue TADF emitters by directly incorporating carbazole fragments into an oxygen-bridged triarylboron acceptor. Depending on the linking mode, the two emitters show significantly different photophysical properties. Benefitting from the bulky steric hindrance between the acceptor and terminal pendants, the blue emitter TDBA-Cz exhibited a high photoluminescence quantum yield (PLQY) of 88% in neat films and narrowband emission. The corresponding non-doped blue device exhibited a maximum external quantum efficiency (EQE) of 21.4%, with a full width at half maximum (FWHM) of only 45 nm. This compound is the first blue TADF emitter that can concurrently achieve narrow bandwidth and high electroluminescence (EL) efficiency in nondoped blue TADF-OLEDs.

A donor–acceptor TADF emitter showed narrowband high-efficiency blue emission by fine molecular modulation. The corresponding OLEDs exhibited a maximum EQE of 21.4% and a small FWHM of 45 nm, representing the most efficient nondoped blue TADF-OLEDs.

From truxenes to heterotruxenes: playing with heteroatoms and the symmetry of molecules

As a result of the modification of truxene, we can change the electronic structure or create multidimensional materials. Thus, the use of truxenes is very wide.

Homoleptic Ir(III) Phosphors with 2-Phenyl-1,2,4-triazol-3-ylidene Chelates for Efficient Blue Organic Light-Emitting Diodes

In this report, we synthesized two series of deep-blue-emitting homoleptic iridium(III) phosphors bearing 1,2,4-triazol-3-ylidene and 5-(trifluoromethyl)-1,2,4-triazol-3-ylidene cyclometalate. Compared with reported synthetic routes using Ag₂O as the promoter, herein, we adopted a different strategy to furnish these complexes in high yields. Also, the meridional to facial isomerization was executed in the presence of trifluoroacetic acid. These phosphors were examined using NMR spectroscopies, single-crystal X-ray diffraction studies, and photophysical methods. The results revealed that electron-withdrawing trifluoromethyl substitution on the N-heterocyclic carbene fragment only gave a minor variation of photoluminescence peak wavelengths and a decrease in radiative lifetime but notable reduction in thermal stabilities. The parent 1,2,4-triazol-3-ylidene complexes have been demonstrated to be suitable for use as deep-blue phosphors, with structured emission with the peak max. located at ∼420 nm and with photoluminescence quantum yields in a range of 34.8-42.5% in degassed THF solution at RT. Fabrication of both the phosphorescent organic light-emitting diodes (OLEDs) and phosphor-sensitized OLEDs (or hyperphosphorescence) was successfully conducted, from which the OLED device based on m-tz1 showed a max. external quantum efficiency (EQE) of 10% with CIE_x,y coordinates of 0.15, 0.06, while the corresponding hyperphosphorescent OLED using m-tz2 as a sensitizer and t-DABNA as a terminal emitter afforded a significantly improved max. EQE of 19.7%, EL λ_max of 468 nm, and FWHM of 31 nm with CIE_x,y coordinates of 0.12, 0.13.

White Light Luminescence from a Homo-conjugated Molecule with Thermally Activated Delayed Fluorescence

Luminophores with tunable emission properties are appealing due to various applications. Among those properties, thermally activated delayed fluorescence (TADF) has been attracting enormous research interests. Herein, we synthesized a 9,9'-spirobifluorene based homo-conjugated molecule 1, which connects a diphenylamino moiety as electron donor and a naphthalimide group as electron acceptor via 2,2'-positions of spirofluorene. Compound 1 displays dual emission behaviour with both blue and orange fluorescence. The one orange fluorescence around 555 nmshows sensitivity to oxygen and a prolonged lifetime of 284 ns in degassed toluene. Such characteristics imply TADF nature for this emission from a charge-transfer excited state. The other emission at 440 nm with blue colour displayed resistance to oxygen quenching and a normal fluorescence lifetime of 1.5 ns. Compared with control molecule, this emission band is assigned as conventional fluorescence from a localized excited state. In addition, dual emission property allows molecule 1 to be modulated to emit white photoluminescence in thin film with a CIE color coordinate of (0.25, 0.33).

Acceptor-Donor-Acceptor-Type Orange-Red Thermally Activated Delayed Fluorescence Materials Realizing External Quantum Efficiency Over 30% with Low Efficiency Roll-Off

Two new orange-red thermally activated delayed fluorescence (TADF) materials, PzTDBA and PzDBA, are reported. These materials are designed based on the acceptor-donor-acceptor (A-D-A) configuration, containing rigid boron acceptors and dihydrophenazine donor moieties. These materials exhibit a small ΔE_ST of 0.05-0.06 eV, photoluminescence quantum yield (PLQY) as high as near unity, and short delayed exciton lifetime (τ_d ) of less than 2.63 µs in 5 wt% doped film. Further, these materials show a high reverse intersystem crossing rate (k_risc ) on the order of 10⁶ s^-1 . The TADF devices fabricated with 5 wt% PzTDBA and PzDBA as emitting dopants show maximum EQE of 30.3% and 21.8% with extremely low roll-off of 3.6% and 3.2% at 1000 cd m^-2 and electroluminescence (EL) maxima at 576 nm and 595 nm, respectively. The low roll-off character of these materials is analyzed by using a roll-off model and the exciton annihilation quenching rates are found to be suppressed by the fast k_risc and short delayed exciton lifetime. These devices show operating device lifetimes (LT₅₀ ) of 159 and 193 h at 1000 cd m^-2 for PzTDBA and PzDBA, respectively. The high efficiency and low roll-off of these materials are attributed to the good electronic properties originatng from the A-D-A molecular configuration.

A New BODIPY Material for Pure Color and Long Lifetime Red Hyperfluorescence Organic Light-Emitting Diode

A red fluorescent material, 1,3,7,9-tetrakis(4-(tert-butyl)phenyl)-5,5-difluoro-10-(2-methoxyphenyl)-5H-4l4,5l4-dipyrrolo[1,2-c:2',1'-f][1,3,2]diazaborinine (4tBuMB), as an emitting dopant in a thermally activated delayed fluorescence (TADF) sensitized hyperfluorescence organic light-emitting diode (HFOLED) is reported. The 4tBuMB shows a high photoluminescence quantum yield (PLQY) of 99% with an emission maximum at 620 nm and a full width at half-maximum (fwhm) of 31 nm in solution. Further, it shows a deep lowest unoccupied molecular orbital (LUMO) of 3.83 eV. Thus, two TADF materials, 4CzIPN and 4CzTPN, as sensitizing hosts, are selected on the basis of a suitable LUMO level and spectrum overlap with 4tBuMB. The fabricated HFOLED device with 4CzTPN as a sensitizing host and 4tBuMB as an emitting dopant shows a maximum external quantum efficiency (EQE), an emission maximum, an fwhm, and CIE coordinates of 19.4%, 617 nm, 44 nm, and (0.64, 0.36), respectively. The electroluminance performances of the 4CzTPN sensitized device are higher than those of the 4CzIPN-based device, which is attributed to a higher Förster resonance energy transfer (FRET) rate and reduced intersystem crossing/reverse intersystem crossing (ISC/RISC) cycles of the former. Also, the 4CzTPN-based HF device shows a longer device lifetime (LT₉₀) of 954 h than the 4CzIPN-baed device (LT₉₀ of 57 h) at 3000 cd m^-2. The higher device stability is due to the higher bond dissociation energies (BDEs) of 4CzTPN and 4tBuMB than that of 4CzIPN.