Turning the Light on Phenols: New Opportunities in Organic Synthesis

Biosustainable Hybrid Nanoplatforms as Photoacoustic Agents

The development of biosafe theranostic nanoplatforms has attracted great attention due to their multifunctional behavior, reduced potential toxicity, and improved long-term safety. When considering photoacoustic contrast agents and photothermal conversion tools, melanin and constructs like melanin are highly appealing due to their ability to absorb optical energy and convert it into heat. Following a sustainable approach, in this study, silver-melanin like-silica nanoplatforms are synthesized exploiting different bio-available and inexpensive phenolic acids as potential melanogenic precursors and exploring their role in tuning the final systems architecture. The UV-Vis combined with X-Ray Diffraction investigation proves metallic silver formation, while Transmission Electron Microscopy analysis reveals that different morphologies can be obtained by properly selecting the phenolic precursors. By looking at the characterization results, a tentative formation mechanism is proposed to explain how phenolic precursors' redox behavior may affect the nanoplatforms' structure. The antibacterial activity experiments showed that all synthesized systems have a strong inhibitory effect on Escherichia coli, even at low concentrations. Furthermore, very sensitive Photoacoustic Imaging capabilities and significant photothermal behavior under laser irradiation are exhibited. Finally, a marked influence of phenol nature on the final system architecture is revealed resulting in a significant effect on both biological and photoacoustic features of the obtained systems. These melanin-based hybrid systems exhibit excellent potential as triggerable nanoplatforms for various biomedical applications.

Csp2-H functionalization of phenols: an effective access route to valuable materials via Csp2-C bond formation

In the vast majority of top-selling pharmaceutical and industrial products, phenolic structural motifs are highly prevalent. Non-functionalized simple phenols serve as building blocks in the synthesis of value-added chemicals. It is worth mentioning that lignin, being the largest renewable biomass source of aromatic building blocks in nature, mainly consists of phenolic units, which enable the production of structurally diverse phenols. Given their remarkable applicability in the chemical value chain, many efforts have been devoted to increasing the molecular complexity of the phenolic scaffold. Among the key techniques, direct functionalization of Csp2-H is a powerful tool, enabling the construction of new Csp2-C bonds in an economical and atomic manner. Herein we present and summarize the large plethora of direct Csp2-H functionalization methods that enables scaffold diversification of simple, unprotected phenols, leading to the formation of new Csp2-C bonds. In this review article, we intend to summarize the contributions that appeared in the literature mainly in the last 5 years dealing with the functionalization of unprotected phenols, both catalytic and non-catalytic. Our goal is to highlight the key findings and the ongoing challenges in the stimulating and growing research dedicated to the development of new protocols for the valorization of phenols.

1,4-Dihydropyridine Anions as Potent Single-Electron Photoreductants

We report the use of simple 1,4-dihydropyridine anions as a general platform for promoting single-electron photoreductions. In the presence of a mild base, 1,4-dihydropyridines were shown to effectively promote the hydrodechlorination and borylation of aryl chlorides and the photodetosylation of N-tosyl aromatic amines under visible light irradiation. Our studies also demonstrate that the C4 substituent can influence the reactivity of these anions, reducing unwanted side reactions like hydrogen atom transfer and back-electron transfer.

Photoinduced selective perfluoroalkylation of terminal alkynes via electron donor-acceptor complexes

Herein, we report a photoinduced selective perfluoroalkylation of terminal alkynes driven by the noncovalent interaction between a thymol anion and fluoroalkyl iodides. By precisely tuning the reaction solvent, a wide range of 37 structurally diverse perfluoroalkylated alkynes and alkenes, including ibuprofen, empagliflozin, galactose, isoxepac and indomethacin, were obtained in up to 92% yields. Mechanistic studies reveal the formation of EDA complexes between the thymol anion and fluoroalkyl iodides. This strategy may provide an important complement to traditional approaches to prepare useful perfluoroalkylated alkynes and alkenes.

Synthesis of a novel tetra-phenol π-extended phenazine and its application as an organo-photocatalyst

In this paper, the synthesis of a novel tetra-phenol π-extended dihydrophenazine is reported. The obtained derivative presents marked reducing properties in the excited state and was exploited as an organo-photocatalyst in dehalogenation and C-C bond formation reactions. These results underline the great potential of functionalized π-extended dihydrophenazines as organo-photocatalysts.

Anthraquinone-Modified Silica Nanoparticles as Heterogeneous Photocatalyst for the Oxidative Hydroxylation of Arylboronic Acids

In this work, the synthesis and characterization of a heterogeneous photocatalyst based on spherical silica nanoparticles superficially modified with anthraquinone 2-carboxylic acid (AQ-COOH) are presented. The nanomaterial was characterized by TEM, SEM, FT-IR, diffuse reflectance, fluorescence, NMR, DLS, XRD and XPS. These analyses confirm the covalent linking of AQ-COOH with the NH2 functionality in the nanomaterial and, more importantly, the photocatalyst retains its photophysical properties once bound. The heterogeneous photocatalyst was successfully employed in the aerobic hydroxylation of arylboronic acids to phenols under sustainable reaction conditions. Phenols were obtained in high yields (up to 100 %) with low catalyst loading (3.5 mol %), reaching TOF values of 3.7 h-1 . Using 2-propanol as solvent at room temperature, the visible light photocatalysis produced H2 O2 as a key intermediate to promote the aerobic hydroxylation of arylboronic acids. The heterogeneous photocatalyst was reused at least 5 times, without modification of the nanomaterial structure and morphology. This simple heterogeneous system showed great catalytic activity under sustainable reaction conditions.

Indole-Fused Benzoxepine Synthesis via Visible-Light-Driven Aerobic Dehydrogenative [5 + 2] Annulation

A photocatalyzed oxidative dehydrogenative annulation between 2-(1H-indol-2-yl)phenols and alkenylphenols is presented. Various indole-fused benzoxepines can be obtained at room temperature using atom-efficient strategies. This method not only avoids the use of stoichiometric amounts of oxidants but also exhibits excellent atom economy by generating H2O as the only theoretical byproduct.

Photoinduced Trifluoromethylselenolation of Aryl Halides with [Me4N][SeCF3]

A visible-light-induced metal-free trifluoromethylselenolation of aryl iodides and bromides with [Me4N][SeCF3] is described. The reaction was conducted at ambient temperature by successfully harnessing the light-sensitive SeCF3 reagent. Mechanistically, the EDA complexes between aryl halide and the -SeCF3 anion or the base might be formed and excited by light, which subsequently undergo intracomplex SET processes to generate aryl and •SeCF3 radicals as key intermediates, allowing a convenient and green access to various aryl trifluoromethyl selenoethers.

A tautomerized ligand enabled meta selective C-H borylation of phenol

Remote meta selective C-H functionalization of aromatic compounds remains a challenging problem in chemical synthesis. Here, we report an iridium catalyst bearing a bidentate pyridine-pyridone (PY-PYRI) ligand framework that efficiently catalyzes this meta selective borylation reaction. We demonstrate that the developed concept can be employed to introduce a boron functionality at the remote meta position of phenols, phenol containing bioactive and drug molecules, which was an extraordinary challenge. Moreover, we have demonstrated that the method can also be applied for the remote C6 borylation of indole derivatives including tryptophan that was the key synthetic precursor for the total synthesis of Verruculogen and Fumitremorgin A alkaloids. The inspiration of this catalytic concept was started from the O-Si secondary interaction, which by means of several more detailed control experiments and detailed computational investigations revealed that an unprecedented Bpin shift occurs during the transformation of iridium bis(boryl) complex to iridium tris(boryl) complex, which eventually control the remote meta selectivity by means of the dispersion between the designed ligand and steering silane group.

Visible-Light-Promoted Aryl Cation Formation: Aromatic SN1 Reactions of Areneazo-2-(2-nitro)propanes

The visible light excitation of areneazo-2-(2-nitro)propane·HCl salts generated the singlet aryl cation that readily underwent aromatic SN1 reactions with a variety of nucleophiles. The in situ generated singlet aryl cation was stabilized by a counter nitronate anion that prevented other intersystem crossing and single electron transfer processes. With the improved safety features of neutral areneazo-2-(2-nitro)propane derivatives, the current visible-light-promoted aromatic SN1 reactions provide an alternative aryl Csp2-X bond forming strategy.

Salicylaldehyde as an SET-HAT Bifunctional Photocatalyst for the Intermolecular Transalkylation of Phthalimide

Salicylaldehyde works as an efficient photocatalyst for the intermolecular transalkylation of phthalimide. The well-designed dimethyl N-hydroxyphthalimide ester proves to be a good alkylation reagent. It inhibits the competing intramolecular alkylation of alkylating reagent, enabling the site-specific synthesis of N-substituted phthalimide.

Bifunctional 1-Hydroxypyrene Photocatalyst for Hydrodesulfurization via Reductive C(Aryl)-S Bond Cleavage

We developed the visible-light-induced hydrodesulfurization of alkyl aryl thioethers via the reductive cleavage of the C(aryl)-S bond using 1-hydroxypyrene as a Brønsted acid-reductant bifunctional photocatalyst. The hydrodesulfurization reaction proceeded under simple reaction conditions (1-hydroxypyrene and Et₃N in THF under purple LED illumination); this reaction did not require chemicals commonly used for hydrodesulfurization, such as hydrosilanes, transition metal catalysts, and/or stoichiometric amounts of metal reagents. Detailed mechanistic studies based on control experiments, spectroscopic measurements, and computational studies revealed that the cleavage of the C(aryl)-S bond and the formation of the C(aryl)-H bond proceeded via the formation of the ion pair between the radical anion of alkyl aryl thioether and Et₃N⁺H, resulting in the generation of a sulfur radical. In addition, the 1-hydroxypyrene catalyst was regenerated via hydrogen atom transfer (HAT) from Et₃N.

Halogen-Bonding-Promoted Photoinduced C-X Borylation of Aryl Halide Using Phenol Derivatives

This study investigates the photoinduced C-X borylation reaction of aryl halides by forming a halogen-bonding (XB) complex using 2-naphthol as an XB acceptor. The method is chemoselective and broadly functional group tolerant and provides concise access to corresponding boronate esters. Mechanistic studies reveal that forming the XB complex between aryl halide and naphthol acts as an electron donor-acceptor complex to furnish aryl radicals through photoinduced electron transfer.

Photoinduced Cascade Reactions of 2-Allylphenol Derivatives toward the Production of 2,3-Dihydrobenzofurans

A light-driven protocol for the synthesis of 2,3-dihydrobenzofurans under mild conditions is reported. Specifically, the cascade process is initiated by the photochemical activity of allyl-functionalized phenolate anions, generated in situ upon deprotonation of the corresponding phenols. The reaction proceeds rapidly with reaction times as low as 35 min, delivering a wide range of densely functionalized products (20 examples, yields up to 69%). Mechanistic studies have also been performed providing convincing evidence for the photochemical formation of carbon-centered radical species. A cascade reaction pathway involving a tandem atom transfer radical addition (ATRA) and an intramolecular nucleophilic substitution (SN) process is proposed to occur.

Template-Less and Surfactant-Less Synthesis of CeO2 Nanostructures for Catalytic Application in Ipso-hydroxylation of Aryl Boronic Acids and the aza-Michael Reaction

Due to its excellent physicochemical properties, CeO₂ has found great importance as an electrochemical and in electronics, photocatalysis, sensing, and heterogeneous catalysis. Herein, we report the surfactant-less and template-less synthesis of CeO₂ nanostructures by the hydrothermal method. The synthesized CeO₂ nanostructures have been characterized in detail by electron microscopy, spectroscopy, diffractometry, and other analytical methods. The XRD studies revealed the formation of pure crystalline CeO_2, possessing a cubic fluorite structure with an average crystallite size of 15.6 to 16.4 nm. Electron microscopy studies reveal the formation of cube-shaped CeO₂ nanostructures with sizes below 25 nm. The cube-shaped CeO₂ nanostructures exhibited a higher BET surface area compared to their bulk counterparts. The XPS analysis has confirmed the existence of Ce in the mixed oxidation states of +3 and +4, while O is present as O^2- in the sample. The as-synthesized CeO₂ nanostructures exhibit excellent catalytic activity in both the ipso-hydroxylation of aryl boronic acids and the aza-Michael reaction. The analysis of the used catalyst has confirmed its stability under the reported reaction conditions. The catalysts retain their catalytic activity up to the fifth run in both types of reactions, which is economically beneficial for industrial application.

Reliable experimental method for determination of photoacidity revealed by quantum chemical calculations

Photoacids are aromatic acids that exhibit significantly different acidities when they are electronically excited. Three experimental methods have been extensively used to determine the photoacidity, : fluorescence titration, the Förster cycle, and time-resolved experiments. However, the photoacidities determined by these experimental methods are not consistent. In this work, we used a theoretical method to evaluate the reliability of experimentally determined values. In particular, density functional theory (DFT) and time-dependent DFT calculations were used to obtain the changes in Gibbs free energy for acid dissociation reactions which are directly related to values. The Förster cycle, which is frequently used to experimentally determine the photoacidity due to its simplicity, yielded inconsistent results depending on how the transition energy was defined. We evaluated six empirical parameters extracted from the absorption and emission spectra of acidic and basic species of photoacids to adequately define the transition energy in the Förster cycle. And we found that the values obtained using the optical bandgap as the transition energy in the Förster cycle were in the best agreement with the results of quantum chemical calculations.

The Nickel Age in Synthetic Dual Photocatalysis: A Bright Trip Toward Materials Science

Recently, the field of dual photocatalysis has grown rapidly, to become one of the most powerful tools for the functionalization of organic molecules under mild conditions. In particular, the merging of Earth-abundant nickel-based catalytic systems with visible-light-activated photoredox catalysts has allowed the development of a number of unique green synthetic approaches. This goes in the direction of ensuring an effective and sustainable chemical production, while safeguarding human health and environment. Importantly, this relatively new branch of catalysis has inspired an interdisciplinary stream of research that spans from inorganic and organic chemistry to materials science, thus establishing itself as one dominant trend in modern organic synthesis. This Review aims at illustrating the milestones on the timeline evolution of the photocatalytic systems used, with a critical analysis toward novel applications based on the use of photoactive two-dimensional carbon-based nanostructures. Lastly, forward-looking opportunities within this intriguing research field are discussed.

The Photochemical Activity of a Halogen-Bonded Complex Enables the Microfluidic Light-Driven Alkylation of Phenols

A mild light-driven protocol for the direct alkylation of phenols is reported. The process is driven by the photochemical activity of a halogen-bonded complex formed upon complexation of the in situ generated electron-rich phenolate anion with the α-iodosulfone. The reaction proceeds rapidly (10 min) under microfluidic conditions, delivering a wide variety of ortho-alkylated products (27 examples, up to 97% yield, >20:1 regioselectivity, on a gram scale), including densely functionalized bioactive phenol derivatives

The advent and development of organophotoredox catalysis

In the last decade, photoredox catalysis has unlocked unprecedented reactivities in synthetic organic chemistry. Seminal advancements in the field have involved the use of well-studied metal complexes as photoredox catalysts (PCs). More recently, the synthetic community, looking for more sustainable approaches, has been moving towards the use of purely organic molecules. Organic PCs are generally cheaper and less toxic, while allowing their rational modification to an increased generality. Furthermore, organic PCs have allowed reactivities that are inaccessible by using common metal complexes. Likewise, in synthetic catalysis, the field of photocatalysis is now experiencing a green evolution moving from metal catalysis to organocatalysis. In this feature article, we discuss and critically comment on the scientific reasons for this ongoing evolution in the field of photoredox catalysis, showing how and when organic PCs can efficiently replace their metal counterparts.