Olefin Metathesis in Confinement: Towards Covalent Organic Framework Scaffolds for Increased Macrocyclization Selectivity

Influence of Ionic Liquid Film Thickness and Flow Rate on Macrocyclization Efficiency and Selectivity in Supported Ionic Liquid-Liquid Phase Catalysis

Supported ionic-liquid phase (SILP) technology in a biphasic setting with n-heptane as the transport phase was applied to the Ru-alkylidene-N-heterocyclic carbene (NHC) catalyzed macrocyclization of α,ω-dienes to elucidate the effect of ionic liquid (IL)-film thickness, flow rate as well as substrate and product concentration on macrocyclization efficiency, and Z-selectivity. To understand the molecular-level behavior of the substrates and products at the n-heptane/IL interphase, atomistic molecular dynamics simulations were conducted and correlated with experimental observations. The thickness of the IL layer strongly influences the Z/E ratio of the products in that a thin IL layer favors higher Z/E ratios by confining the catalyst between the pore wall and the liquid-liquid interphase whereas a thick IL layer favors formation of the E-product and Ru-hydride catalyzed isomerization reactions. Also, macrocyclization efficiency, expressed by the ratio of oligomers/macromonocycle (O/MMC), is influenced both by the flow rate and the thickness of the IL layer.

Synthesis of Homoallylamine Covalent Organic Frameworks Via Hosomi-Sakurai Reaction Under Mild Conditions

One-pot multicomponent reactions (MCRs) are a valuable strategy to synthesize functional covalent organic frameworks (COFs) in a single step. Most reported COF syntheses involve solvothermal processes, and because of the harsh reaction conditions, such as high temperature or high pressure, large-scale production of COFs has been limited. The synthesis of homoallylamine substituted COFs via a one-pot Hosomi-Sakurai reaction is reported. At room temperature the reaction of allyltriethylgermane with either terephthalaldehyde or [1,1'-biphenyl]-4,4'-dicarbaldehyde, and 1,3,5-tris(4-aminophenyl)benzene (TAPB) is catalyzed by Sc(OTf)3 to produce two COFs: TAPB-1P-Allyl COF and TAPB-BP-Allyl COF. The allyl functionalized COFs shows high crystallinity, with micropores ranging from 3.2 to 3.9 nm, for TAPB-1P-Allyl COF and TAPB-BP-Allyl COF respectively, and both COFs are hydrolytically stable at different pH levels. Post-synthetic modification of these COFs with iodomethane produces methylated cationic COFs that demonstrates >98% adsorption efficiencies below the detection limit of perfluorooctanoic acid (PFOA) and perfluorodecanoic acid (PFDA) from aqueous solutions. After four cycles adsorption efficiency remains high with concentrations of PFOA below the detection limit.

Probing Self-Diffusion of Guest Molecules in a Covalent Organic Framework: Simulation and Experiment

Covalent organic frameworks (COFs) are a class of porous materials whose sorption properties have so far been studied primarily by physisorption. Quantifying the self-diffusion of guest molecules inside their nanometer-sized pores allows for a better understanding of confinement effects or transport limitations and is thus essential for various applications ranging from molecular separation to catalysis. Using a combination of pulsed field gradient nuclear magnetic resonance measurements and molecular dynamics simulations, we have studied the self-diffusion of acetonitrile and chloroform in the 1D pore channels of two imine-linked COFs (PI-3-COF) with different levels of crystallinity and porosity. The higher crystallinity and porosity sample exhibited anisotropic diffusion for MeCN parallel to the pore direction, with a diffusion coefficient of Dpar = 6.1(3) × 10-10 m2 s-1 at 300 K, indicating 1D transport and a 7.4-fold reduction in self-diffusion compared to the bulk liquid. This finding aligns with molecular dynamics simulations predicting 5.4-fold reduction, assuming an offset-stacked COF layer arrangement. In the low-porosity sample, more frequent diffusion barriers result in isotropic, yet significantly reduced diffusivities (DB = 1.4(1) × 10-11 m2 s-1). Diffusion coefficients for chloroform at 300 K in the pores of the high- (Dpar = 1.1(2) × 10-10 m2 s-1) and low-porosity (DB = 4.5(1) × 10-12 m2 s-1) samples reproduce these trends. Our multimodal study thus highlights the significant influence of real structure effects such as stacking faults and grain boundaries on the long-range diffusivity of molecular guest species while suggesting efficient intracrystalline transport at short diffusion times.

Disentanglement of Surface and Confinement Effects for Diene Metathesis in Mesoporous Confinement

We study the effects of a planar interface and confinement on a generic catalytically activated ring-closing polymerization reaction near an unstructured catalyst. For this, we employ a coarse-grained polymer model using grand-canonical molecular dynamics simulations with a Monte Carlo reaction scheme. Inspired by recent experiments in the group of M. Buchmeiser that demonstrated an increase in ring-closing selectivity under confinement, we show that both the interface effects, i.e., placing the catalyst near a planar wall, and the confinement effects, i.e., locating the catalyst within a pore, lead to an increase of selectivity. We furthermore demonstrate that curvature effects for cylindrical mesopores (2 nm < d < 12.3 nm) influence the distribution of the chain ends, leading to a further increase in selectivity. This leads us to speculate that specially corrugated surfaces might also help to enhance catalytically activated polymerization processes.

Effect of liquid confinement on regioselectivity in the hydrosilylation of alkynes with cationic Rh(I) N-heterocyclic carbene catalysts

Polymeric mesoporous monoliths were prepared via ring-opening metathesis polymerization (ROMP) from norbornene (NBE), 1,4,4a,5,8,8a-hexahydro-1,4,5,8-exo,endo-dimethanonaphthalene (DMN-H6), tris(norborn-2-enylmethylenoxy)methylsilane and the 1st-generation Grubbs catalyst [RuCl2(PCy3)2(CHC6H5)] in the presence of 2-propanol and toluene and surface grafted with 1-(2-((norborn-5-ene-2-carbonyl)oxy)ethyl)-3-ethyl-1H-imidazol-3-ium tetrafluoroborate. Subsequently, a supported ionic-liquid-phase (SILP) system was created by immobilizing the ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF4] with the cationic catalyst [Rh((1-pyrid-1-yl)-3-mesitylimidazol-2-ylidene)(COD)+BF4-] (Rh-1; COD = 1,4-cyclooctadiene) dissolved therein. The regio- and stereoselectivity of Rh-1 dissolved in the IL and supported on the mesoporous monolith, referred to as Rh@SILPROMP, in the hydrosilylation of 1-alkynes with HSiMe2Ph was studied and compared to that of the homogeneous catalyst Rh-1 under biphasic conditions using methyl tert-butyl ether (MTBE) as a second organic phase. Different amounts of IL were used, which allowed for the creation of SILPs with different layer thicknesses. Rh@SILPROMP provided by far better β-(Z) selectivity for both aromatic and aliphatic 1-alkynes in comparison to Rh-1 used under biphasic conditions. The highest β-(Z) selectivity was obtained with the thinnest IL layer. No leaching of the IL or rhodium from the SILP system into the organic phase was observed, resulting in virtually metal-free hydrosilylation products. The data obtained with Rh@SILPROMP were also compared with those from previous studies with Rh-1 in the same IL supported on polyurethane-derived mesoporous monolithic supports (Rh@SILPPUR) and on mesoporous SBA-15 (Rh@SILPSBA-15). For the first time, the use of a liquid confinement created by both a SILP and the support itself to tune the transition state of an organometallic catalyst by non-covalent interactions and thus stereo- and regioselectivity is outlined.

Metalated covalent organic frameworks: from synthetic strategies to diverse applications

Covalent organic frameworks (COFs) are a class of organic crystalline porous materials discovered in the early 21st century that have become an attractive class of emerging materials due to their high crystallinity, intrinsic porosity, structural regularity, diverse functionality, design flexibility, and outstanding stability. However, many chemical and physical properties strongly depend on the presence of metal ions in materials for advanced applications, but metal-free COFs do not have these properties and are therefore excluded from such applications. Metalated COFs formed by combining COFs with metal ions, while retaining the advantages of COFs, have additional intriguing properties and applications, and have attracted considerable attention over the past decade. This review presents all aspects of metalated COFs, from synthetic strategies to various applications, in the hope of promoting the continued development of this young field.