Formation of Mefenamic Acid Nanocrystals with Improved Dissolution Characteristics

Factors affecting the preparation of nanocrystals: characterization, surface modifications and toxicity aspects

INTRODUCTION

The fabrication of well-defined nanocrystals in size and form is the focus of much investigation. In this work, we have critically reviewed several recent instances from the literature that shows how the production procedure affects the physicochemical properties of the nanocrystals.

AREAS COVERED

Scopus, MedLine, PubMed, Web of Science, and Google Scholar were searched for peer-review articles published in the past few years using different key words. Authors chose relevant publications from their files for this review. This review focuses on the range of techniques available for producing nanocrystals. We draw attention to several recent instances demonstrating the impact of various process and formulation variables that affect the nanocrystals' physicochemical properties. Moreover, various developments in the characterization techniques explored for nanocrystals concerning their size, morphology, etc. have been discussed. Last but not least, recent applications, the effect of surface modifications, and the toxicological traits of nanocrystals have also been reviewed.

EXPERT OPINION

The selection of an appropriate production method for the formation of nanocrystals, together with a deep understanding of the relationship between the drug's physicochemical properties, unique features of the various formulation alternatives, and anticipated in-vivo performance, would significantly reduce the risk of failure during human clinical trials that are inadequate.

A review of transglycosylated compounds as food additives to enhance the solubility and oral absorption of hydrophobic compounds in nutraceuticals and pharmaceuticals

Transglycosylation has been used to modify the physicochemical properties of original compounds. As a result, transglycosylated compounds can form molecular aggregates in size ranges of a few nanometers in an aqueous medium when their concentrations exceed a specific level. Incorporating these hydrophobic compounds has been observed to enhance the solubility of hydrophobic compounds into aggregate structures. Thus, this review introduces four transglycosylated compounds as food additives that can enhance the solubility and oral absorption of hydrophobic compounds. Here, transglycosylated hesperidin, transglycosylated rutin, transglycosylated naringin, and transglycosylated stevia are the focus as representative substances. Significantly, we observed that amorphous formations containing hydrophobic compounds with transglycosylated compounds improved solubility and oral absorption compared to untreated hydrophobic compounds. Moreover, combining transglycosylated compounds with hydrophilic polymers or surfactants enhanced the solubilizing effects on hydrophobic compounds. Furthermore, the enhanced solubility of hydrophobic compounds improved their oral absorption. Transglycosylated compounds also influenced nanoparticle preparation of hydrophobic compounds as a dispersant. This study demonstrated the benefits of transglycosylated compounds in developing supplements and nutraceuticals of hydrophobic compounds with poor aqueous solubility.

Modeling and Simulation of Process Technology for Nanoparticulate Drug Formulations-A Particle Technology Perspective

Crystalline organic nanoparticles and their amorphous equivalents (ONP) have the potential to become a next-generation formulation technology for dissolution-rate limited biopharmaceutical classification system (BCS) class IIa molecules if the following requisites are met: (i) a quantitative understanding of the bioavailability enhancement benefit versus established formulation technologies and a reliable track record of successful case studies are available; (ii) efficient experimentation workflows with a minimum amount of active ingredient and a high degree of digitalization via, e.g., automation and computer-based experimentation planning are implemented; (iii) the scalability of the nanoparticle-based oral delivery formulation technology from the lab to manufacturing is ensured. Modeling and simulation approaches informed by the pharmaceutical material science paradigm can help to meet these requisites, especially if the entire value chain from formulation to oral delivery is covered. Any comprehensive digitalization of drug formulation requires combining pharmaceutical materials science with the adequate formulation and process technologies on the one hand and quantitative pharmacokinetics and drug administration dynamics in the human body on the other hand. Models for the technical realization of the drug production and the distribution of the pharmaceutical compound in the human body are coupled via the central objective, namely bioavailability. The underlying challenges can only be addressed by hierarchical approaches for property and process design. The tools for multiscale modeling of the here-considered particle processes (e.g., by coupled computational fluid dynamics, population balance models, Noyes–Whitney dissolution kinetics) and physiologically based absorption modeling are available. Significant advances are being made in enhancing the bioavailability of hydrophobic compounds by applying innovative solutions. As examples, the predictive modeling of anti-solvent precipitation is presented, and options for the model development of comminution processes are discussed.

Can spray freeze-drying improve the re-dispersion of crystalline nanoparticles of pure naproxen?

Spray freeze drying (SFD) was used to prepare re-dispersible powders of crystalline, pure-drug nanodispersions of naproxen in lactose and stabilized with hydroxypropyl cellulose. The particle size of the rehydrated powders was determined using static light scattering/Mie analysis. The nanoparticles present in the SFD powders were aggregated but could be dispersed on re-dispersion with water and stirring either with or without additional ultrasonic treatment. The disaggregation of the SFD nanoparticles was superior to that reported in the literature for spray dried nanoparticles of the same composition. It appears that the moderately-rapid freezing of the large spray droplets in LN2 during SFD produces less aggregation than does evaporative drying of the much smaller droplets during spray drying. Re-dispersion was also found to depend strongly on the pH of the original nanodispersion. The solubility of this weak acid is greater at higher pH which resulted in formation of a dissolved fraction of drug in the nanodispersions during media milling. After SFD, the dissolved naproxen fraction formed an amorphous solid which re-dissolves on re-hydration whereas the crystalline nanoparticles disaggregate.

Multicomponent Crystal of Mefenamic Acid and N-Methyl-d-Glucamine: Crystal Structures and Dissolution Study

A novel multicomponent crystal (MC) of mefenamic acid (MA) and N-methyl-d-glucamine (MG) had been prepared to improve the physicochemical properties of poorly soluble drugs, and was characterized for its physicochemical properties by powder X-ray diffraction analysis, differential scanning calorimetry thermal analysis, FT-IR spectroscopy, in vitro dissolution rate, and physical stability. In addition, the crystal structure was determined by single-crystal X-ray diffraction analysis. The differential scanning calorimetry thermogram of the MA-MG binary system exhibits a single and sharp endothermic peak at 151.20°C, which was attributed to the melting point of a MC of MA-MG. FT-IR spectroscopy analysis showed the occurrence of solid-state interaction by involving proton transfer between MA and MG. The crystal structure analysis confirmed that MA-MG formed 1:1 ratio salt type MC. The formation of a MC of MA with MG significantly improved the dissolution rate of MA in compared to intact MA, and also the crystal demonstrated a good stability under a high relative humidity. These good properties would be attributed to the layer structure of MA and MG in the crystal.

Drug–drug salts of mefenamic acid\tolfenamic acid and piperazine to improve physicochemical properties for potential veterinary use

Drug–drug salts of mefenamic acid\tolfenamic acid and piperazine were designed to improve the solubility and hygroscopicity, which could possibly extend the drug–drug salt form into veterinary use.

Enhanced dissolution of naproxen from pure-drug, crystalline nanoparticles: A case study formulated into spray-dried granules and compressed tablets

This is a case study of the use of rapidly-dissolving naproxen crystalline nanoparticles to prepare compressed tablets. The dissolution rates of different formulations were determined: the crystalline pure-drug nanodispersion, a pure-drug microsuspension, a granule prepared by spray drying the nanodispersion with mannitol, and a tablet prepared by compressing the granule with a bulking agent and a disintegrant. The goal was to determine the influence of each of the process steps on the rapid dissolution of the nanodispersion. A procedure was developed to allow sampling during the first 120 s of dissolution. Dissolution of the nanodispersion was completed after 60 s under both sink and non-sink conditions. Spray drying with mannitol delayed dissolution slightly under both sink and non-sink conditions. Under sink conditions a microsuspension (volume median size 11 µm) showed similar rapid dissolution to the nanodispersion. We propose this to be a result of rapid shrinkage of the microparticles on dissolution under sink conditions. This nullifies any effects of specific surface on dissolution rate. Under non-sink conditions the microparticles retain their lower specific surface for a longer time during dissolution and dissolve therefore more slowly. When compressed into tablets, the dissolution rates of nanoparticles or microparticles were determined primarily by the tablet disintegration time; the influence of sink or non-sink conditions was only observable after disintegration.

Bioavailability Enhancement of Poorly Water-Soluble Drugs via Nanocomposites: Formulation⁻Processing Aspects and Challenges

Drug nanoparticles embedded in a dispersant matrix as a secondary phase, i.e., drug-laden nanocomposites, offer a versatile delivery platform for enhancing the dissolution rate and bioavailability of poorly water-soluble drugs. Drug nanoparticles are prepared by top-down, bottom-up, or combinative approaches in the form of nanosuspensions, which are subsequently dried to prepare drug-laden nanocomposites. In this comprehensive review paper, the term “nanocomposites” is used in a broad context to cover drug nanoparticle-laden intermediate products in the form of powders, cakes, and extrudates, which can be incorporated into final oral solid dosages via standard pharmaceutical unit operations, as well as drug nanoparticle-laden strip films. The objective of this paper is to review studies from 2012⁻2017 in the field of drug-laden nanocomposites. After a brief overview of the various approaches used for preparing drug nanoparticles, the review covers drying processes and dispersant formulations used for the production of drug-laden nanocomposites, as well as various characterization methods including quiescent and agitated redispersion tests. Traditional dispersants such as soluble polymers, surfactants, other water-soluble dispersants, and water-insoluble dispersants, as well as novel dispersants such as wet-milled superdisintegrants, are covered. They exhibit various functionalities such as drug nanoparticle stabilization, mitigation of aggregation, formation of nanocomposite matrix⁻film, wettability enhancement, and matrix erosion/disintegration. Major challenges such as nanoparticle aggregation and poor redispersibility that cause inferior dissolution performance of the drug-laden nanocomposites are highlighted. Literature data are analyzed in terms of usage frequency of various drying processes and dispersant classes. We provide some engineering considerations in comparing drying processes, which could account for some of the diverging trends in academia vs. industrial practice. Overall, this review provides rationale and guidance for drying process selection and robust nanocomposite formulation development, with insights into the roles of various classes of dispersants.