Microtubule crossbridging by chlamydomonas dynein

IC2 participates in the cooperative activation of outer arm dynein densely attached to microtubules

Ciliary outer-arm dynein (OAD) consists of heavy chains (HCs), intermediate chains (ICs), and light chains (LCs), of which HCs are the motor proteins that produce force. Studies using the green alga Chlamydomonas have revealed that ICs and LCs form a complex (IC/LC tower) at the base of the OAD tail and play a crucial role in anchoring OAD to specific sites on the microtubule. In this study, we isolated a novel slow-swimming Chlamydomonas mutant deficient in the IC2 protein. This mutation, E279K, is in the third of the seven WD repeat domains. No apparent abnormality was observed in electron microscope observations of axonemes or in SDS-PAGE analyses of dynein subunits. To explore the reason for the lowered motility in this mutant, in vitro microtubule sliding experiments were performed, which revealed that the motor activity of the mutant OAD was lowered. In particular, a large difference was observed between wild type (WT) and the mutant in the microtubule sliding velocity in microtubule bundles formed with the addition of OAD: ~35.3 μm/sec (WT) and ~4.3 μm/sec (mutant). From this and other results, we propose that IC2 in an OAD interacts with the β HC of the adjacent OAD, and that an OAD-OAD interaction is important for efficient beating of cilia and flagella.Key words: cilia, axoneme, dynein heavy chain, cooperativity.

Mechanical Regulation of Neurite Polarization and Growth: A Computational Study

The densely packed microtubule (MT) array found in neuronal cell projections (neurites) serves two fundamental functions simultaneously: it provides a mechanically stable track for molecular motor-based transport and produces forces that drive neurite growth. The local pattern of MT polarity along the neurite shaft has been found to differ between axons and dendrites. In axons, the neurons' dominating long projections, roughly 90% of the MTs orient with their rapidly growing plus end away from the cell body, whereas in vertebrate dendrites, their orientations are locally mixed. Molecular motors are known to be responsible for cytoskeletal ordering and force generation, but their collective function in the dense MT cytoskeleton of neurites remains elusive. We here hypothesized that both the polarity pattern of MTs along the neurite shaft and the shaft's global extension are simultaneously driven by molecular motor forces and should thus be regulated by the mechanical load acting on the MT array as a whole. To investigate this, we simulated cylindrical bundles of MTs that are cross-linked and powered by molecular motors by iteratively solving a set of force-balance equations. The bundles were subjected to a fixed load arising from actively generated tension in the actomyosin cortex enveloping the MTs. The magnitude of the load and the level of motor-induced connectivity between the MTs have been varied systematically. With an increasing load and decreasing motor-induced connectivity between MTs, the bundles became wider in cross section and extended more slowly, and the local MT orientational order was reduced. These results reveal two, to our knowledge, novel mechanical factors that may underlie the distinctive development of the MT cytoskeleton in axons and dendrites: the cross-linking level of MTs by motors and the load acting on this cytoskeleton during growth.

Ciliary Proteins: Filling the Gaps. Recent Advances in Deciphering the Protein Composition of Motile Ciliary Complexes

Cilia are highly evolutionarily conserved, microtubule-based cell protrusions present in eukaryotic organisms from protists to humans, with the exception of fungi and higher plants. Cilia can be broadly divided into non-motile sensory cilia, called primary cilia, and motile cilia, which are locomotory organelles. The skeleton (axoneme) of primary cilia is formed by nine outer doublet microtubules distributed on the cilium circumference. In contrast, the skeleton of motile cilia is more complex: in addition to outer doublets, it is composed of two central microtubules and several diverse multi-protein complexes that are distributed periodically along both types of microtubules. For many years, researchers have endeavored to fully characterize the protein composition of ciliary macro-complexes and the molecular basis of signal transduction between these complexes. Genetic and biochemical analyses have suggested that several hundreds of proteins could be involved in the assembly and function of motile cilia. Within the last several years, the combined efforts of researchers using cryo-electron tomography, genetic and biochemical approaches, and diverse model organisms have significantly advanced our knowledge of the ciliary structure and protein composition. Here, we summarize the recent progress in the identification of the subunits of ciliary complexes, their precise intraciliary localization determined by cryo-electron tomography data, and the role of newly identified proteins in cilia.

Force Generation by Molecular-Motor-Powered Microtubule Bundles; Implications for Neuronal Polarization and Growth

The heavily cross-linked microtubule (MT) bundles found in neuronal processes play a central role in the initiation, growth and maturation of axons and dendrites; however, a quantitative understanding of their mechanical function is still lacking. We here developed computer simulations to investigate the dynamics of force generation in 1D bundles of MTs that are cross-linked and powered by molecular motors. The motion of filaments and the forces they exert are investigated as a function of the motor type (unipolar or bipolar), MT density and length, applied load, and motor connectivity. We demonstrate that only unipolar motors (e.g., kinesin-1) can provide the driving force for bundle expansion, while bipolar motors (e.g., kinesin-5) oppose it. The force generation capacity of the bundles is shown to depend sharply on the fraction of unipolar motors due to a percolation transition that must occur in the bundle. Scaling laws between bundle length, force, MT length and motor fraction are presented. In addition, we investigate the dynamics of growth in the presence of a constant influx of MTs. Beyond a short equilibration period, the bundles grow linearly in time. In this growth regime, the bundle extends as one mass forward with most filaments sliding with the growth velocity. The growth velocity is shown to be dictated by the inward flux of MTs, to inversely scale with the load and to be independent of the free velocity of the motors. These findings provide important molecular-level insights into the mechanical function of the MT cytoskeleton in normal axon growth and regeneration after injury.

Cooperative binding of the outer arm-docking complex underlies the regular arrangement of outer arm dynein in the axoneme

Outer arm dynein (OAD) in cilia and flagella is bound to the outer doublet microtubules every 24 nm. Periodic binding of OADs at specific sites is important for efficient cilia/flagella beating; however, the molecular mechanism that specifies OAD arrangement remains elusive. Studies using the green alga Chlamydomonas reinhardtii have shown that the OAD-docking complex (ODA-DC), a heterotrimeric complex present at the OAD base, functions as the OAD docking site on the doublet. We find that the ODA-DC has an ellipsoidal shape ∼24 nm in length. In mutant axonemes that lack OAD but retain the ODA-DC, ODA-DC molecules are aligned in an end-to-end manner along the outer doublets. When flagella of a mutant lacking ODA-DCs are supplied with ODA-DCs upon gamete fusion, ODA-DC molecules first bind to the mutant axonemes in the proximal region, and the occupied region gradually extends toward the tip, followed by binding of OADs. This and other results indicate that a cooperative association of the ODA-DC underlies its function as the OAD-docking site and is the determinant of the 24-nm periodicity.

Self-organized optical device driven by motor proteins

Protein molecules produce diverse functions according to their combination and arrangement as is evident in a living cell. Therefore, they have a great potential for application in future devices. However, it is currently very difficult to construct systems in which a large number of different protein molecules work cooperatively. As an approach to this challenge, we arranged protein molecules in artificial microstructures and assembled an optical device inspired by a molecular system of a fish melanophore. We prepared arrays of cell-like microchambers, each of which contained a scaffold of microtubule seeds at the center. By polymerizing tubulin from the fixed microtubule seeds, we obtained radially arranged microtubules in the chambers. We subsequently prepared pigment granules associated with dynein motors and attached them to the radial microtubule arrays, which made a melanophore-like system. When ATP was added to the system, the color patterns of the chamber successfully changed, due to active transportation of pigments. Furthermore, as an application of the system, image formation on the array of the optical units was performed. This study demonstrates that a properly designed microstructure facilitates arrangement and self-organization of molecules and enables assembly of functional molecular systems.

Motor-induced sliding of microtubule and actin bundles

Interactions of multiple molecular motors with bundles of actin and microtubule filaments form the basis for many cytoskeletal processes including axonal growth, muscle contraction, cell division and platelet formation. Continuum models based on generalized diffusion equations have been suggested to quantify the dynamics of such active bundles. In highly cross-linked and densely packed filament bundles, however, a major complication arises due to the multiple interactions that each filament forms with its neighbors. To explore the effects of these interactions, we used detailed computer simulations and studied the bundles with different types of motors at different densities and boundary conditions. We found that highly cross-linked bundles exhibit effects of long-ranged interactions that are sensitive to the boundary conditions. In open bundles, these give rise to 'telescopic' patterns resulting in significant acceleration of the filaments at the edges. In contrast, in ringed bundles, the long-ranged interactions 'lock' filaments and slow down their movements. The filaments in loosely connected bundles, on the other hand, undergo local diffusion-drift dynamics consistent with previous continuum models. Our simulations also demonstrate the sorting phenomena in the mixed-polarity bundles and reveal characteristic scales and conditions for spontaneous pattern formation in the bundle. We discuss the relevance of our results for cytoskeleton systems such as microtubules in axons, platelet formation, kinetochore fibers and actin bundles in motile cells.

Axonemal dyneins: assembly, organization, and regulation

Progress in the sequence determination of dynein subunits is providing new insights into the locations of functional domains in these microtubule motors. Combined structural and biochemical analyses of flagellar mutations are also yielding information on the three-dimensional organization of the dynein arms and on the different components that target dynein arm assembly. Physiological approaches are revealing multiple pathways that regulate dynein activity.

The 78,000 M(r) intermediate chain of Chlamydomonas outer arm dynein isa WD-repeat protein required for arm assembly

We have isolated and sequenced a full-length cDNA clone encoding the 78,000 Mr intermediate chain (IC78) of the Chlamydomonas outer arm dynein. This protein previously was shown to be located at the base of the solubilized dynein particle and to interact with alpha tubulin in situ, suggesting that it may be involved in binding the outer arm to the doublet microtubule. The sequence predicts a polypeptide of 683 amino acids having a mass of 76.5 kD. Sequence comparison indicates that IC78 is homologous to the 69,000 M(r) intermediate chain (IC69) of Chlamydomonas outer arm dynein and to the 74,000 M(r) intermediate chain (IC74) of cytoplasmic dynein. The similarity between the chains is greatest in their COOH-terminal halves; the NH(2)-terminal halves are highly divergent. The COOH-terminal half of IC78 contains six short imperfect repeats, termed WD repeats, that are thought to be involved in protein-protein interactions. Although not previously reported, these repeated elements also are present in IC69 and IC74. Using the IC78 cDNA as a probe, we screened a group of slow-swimming insertional mutants and identified one which has a large insertion in the IC78 gene and seven in which the IC78 gene is completely deleted. Electron microscopy of three of these IC78 mutants revealed that each is missing the outer arm, indicating that IC78 is essential for arm assembly or attachment to the outer doublet. Restriction fragment length polymorphism mapping places the IC78 gene on the left arm of chromosome XII/XIII, at or near the mutation oda9, which also causes loss of the outer arm. Mutants with defects in the IC78 gene do not complement the oda9 mutation in stable diploids, strongly suggesting that ODA9 is the structural gene for IC78.

Structural and functional reconstitution of inner dynein arms in Chlamydomonas flagellar axonemes

The inner row of dynein arms contains three dynein subforms. Each is distinct in composition and location in flagellar axonemes. To begin investigating the specificity of inner dynein arm assembly, we assessed the capability of isolated inner arm dynein subforms to rebind to their appropriate positions on axonemal doublet microtubules by recombining them with either mutant or extracted axonemes missing some or all dyneins. Densitometry of Coomassie blue-stained polyacrylamide gels revealed that for each inner dynein arm subform, binding to axonemes was saturable and stoichiometric. Using structural markers of position and polarity, electron microscopy confirmed that subforms bound to the correct inner arm position. Inner arms did not bind to outer arm or inappropriate inner arm positions despite the availability of sites. These and previous observations implicate specialized tubulin isoforms or nontubulin proteins in designation of specific inner dynein arm binding sites. Further, microtubule sliding velocities were restored to dynein-depleted axonemes upon rebinding of the missing inner arm subtypes as evaluated by an ATP-induced microtubule sliding disintegration assay. Therefore, not only were the inner arm dynein subforms able to identify and bind to the correct location on doublet microtubules but they bound in a functionally active conformation.

Microtubule binding and translocation by inner dynein arm subtype I1

Structural, biochemical, and genetic evidence has demonstrated there are three inner dynein arm subforms, I1, I2, and I3, which differ in organization and composition (see Piperno et al.: J. Cell Biol. 110:379-389, 1990). Using dynein extracted from Chlamydomonas outer dynein armless mutant pf28, we have begun to define the structural and functional properties of isolated inner arm subforms. Inner dynein arm I1 was purified either by sucrose density gradient centrifugation or microtubule binding affinity. I1, composed of heavy chains 1 alpha and 1 beta, sedimented at 21S and selectively bound to and cross-linked purified microtubules in an ATP-sensitive manner. Deep etch electron microscopy revealed that the 21S sedimenting fraction contained two-headed structures in which large globular heads are connected by long, flexible-stem domains. In contrast, components derived from I2 and I3 sedimented as a mixture of 11S particles with single globular heads which did not bind to purified microtubules. Both the 21S and 11S sedimenting fractions supported microtubule translocation in in vitro motility assays. In 1 mM MgATP the I1-containing fraction produced very slow microtubule-gliding velocities (0.76 microns/sec) compared to the I2,I3-containing fraction (4.1 microns/sec).

Microdensitometer-computer correlation analysis of two distinct, spatially segregated classes of microtubule bridges in Allogromia pseudopodia

Previous video-light microscopic studies have shown that the microtubule bundles in the pseudopodia of foraminiferan protists display several types of movements in vivo, including active bending, zipping/splaying, and axial translocations. To gain insight into the types and arrangement of microtubule-associated proteins (e.g., mechanoenzymes, crosslinkers) in such a highly dynamic system, we employed microdensitometric-computer correlation methods to analyze, quantitatively, intermicrotubule bridges in thin-section electron micrographs of Allogromia laticollaris and Allogromia sp. (strain NF). Two distinct bridges occupying mutually exclusive zones between adjacent microtubules were identified. Type I bridges displayed a single axial repeat (34 nm for A. laticollaris and 28 nm for Allogromia sp.) and Type II bridges showed a typical 12-dimer helical superlattice pattern. In A. laticollaris, the two types of bridges were morphologically distinct: Type I bridges were aligned perpendicular to the microtubule wall and were 23-nm wide with an electron-lucent core; Type II bridges were irregular filaments projecting from the microtubules at various angles. When compared with the known distribution of microtubule-associated proteins in other systems, our findings indicate that, in vivo, Allogromia pseudopodial microtubules are decorated with MAP2-like bridges interrupted by discrete clusters of a dynein-like component.

Isolated beta-heavy chain subunit of dynein translocates microtubules in vitro

Our goal was to assess the microtubule translocating ability of individual ATPase subunits of outer arm dynein. Solubilized outer arm dynein from sea urchin sperm (Stronglocentrotus purpuratus) was dissociated into subunits by low ionic strength buffer and fractionated by zonal centrifugation. Fractions were assessed by an in vitro functional assay wherein microtubules move across a glass surface to which isolated dynein fractions had been absorbed. Microtubule gliding activity was coincident with the 12-S beta-heavy chain-intermediate chain 1 ATPase fractions (beta/IC1). Neither the alpha-heavy chain nor the intermediate chains 2 and 3 fractions coincided with microtubule gliding activity. The beta/IC1 ATPase induced very rapid gliding velocities (9.7 +/- 0.88 micron/s, range 7-11.5 micron/s) in 1 mM ATP-containing motility buffers. In direct comparison, isolated intact 21-S outer arm dynein, from which the beta/IC1 fraction was derived, induced slower microtubule gliding rates (21-S dynein, 5.6 +/- 0.7 micron/s; beta/IC1, 8.7 +/- 1.2 micron/s). These results demonstrate that a single subdomain in dynein, the beta/IC1 ATPase, is sufficient for microtubule sliding activity.

Interaction of Chlamydomonas dynein with tubulin

Studies were conducted to determine if dynein could bind to unpolymerized tubulin. Tubulin alone normally fractionated in the included volume of a molecular sieve Bio-Gel A-1.5m column. Incubated together, tubulin and dynein coeluted in the void volumn, suggesting that a complex had formed between the two. In addition, immunoelectron microscopy revealed preassembled microtubules were labeled with biotin antibody only when incubated in both dynein and biotinylated tubulin, evidence that dynein with bound biotinylated tubulin had decorated the microtubules. A fraction of the tubulin could be dissociated from dynein by addition of ATP and vanadate, as assayed by molecular sieve chromatography followed by densitometry of gels, suggesting that some tubulin bound to the B end of the dynein arm. Additional tubulin dissociated from the dynein under conditions of high salt. These studies, together with those indicating that tubulin blocked the A end of the dynein arm from binding to microtubules and promoted the interaction of two arms at their A ends, provide evidence that the A end of the arm also can bind tubulin. Thus, the tubulin subunits, themselves, on a microtubule rather than a particular surface lattice structure formed by adjacent protofilaments may provide the binding sites for both ends of the dynein arm.

Direction of force generated by the inner row of dynein arms on flagellar microtubules

Our goal was to determine the direction of force generation of the inner dynein arms in flagellar axonemes. We developed an efficient means of extracting the outer row of dynein arms in demembranated sperm tail axonemes, leaving the inner row of dynein arms structurally and functionally intact. Sperm tail axonemes depleted of outer arms beat at half the beat frequency of sperm tails with intact arms over a wide range of ATP concentrations. The isolated, outer arm-depleted axonemes were induced to undergo microtubule sliding in the presence of ATP and trypsin. Electron microscopic analysis of the relative direction of microtubule sliding (see Sale, W. S. and P. Satir, 1977, Proc. Natl. Acad. Sci. USA, 74:2045-2049) revealed that the doublet microtubule with the row of inner dynein arms, doublet N, always moved by sliding toward the proximal end of the axoneme relative to doublet N + 1. Therefore, the inner arms generate force such that doublet N pushes doublet N + 1 tipward. This is the same direction of microtubule sliding induced by ATP and trypsin in axonemes having both inner and outer dynein arms. The implications of this result for the mechanism of ciliary bending and utility in functional definition of cytoplasmic dyneins are discussed.

The distribution of intermicrotubular bridges in meiotic spindles of the crane fly

The distribution of intermicrotubular bridges in spindles of tipulid spermatocytes (Pales ferruginea, first meiotic division) was analyzed using serial sections of pre-selected cells. Bridges were found in all spindle regions, including kinetochore microtubules and free microtubules in the chromosome fiber. The dimensions of bridges were variable, ranging between 60 and 300 A in length and 40 and 190 A in thickness. Bridges seem to be randomly distributed. No accumulation in or absence from particular spindle regions was detected. Quantitative analysis revealed a linear, positive correlation between the number of microtubules and the number of microtubule pairs capable of forming bridges and, on the other hand, between microtubule pairs and intermicrotubular bridges. The possible composition and significance of bridges are discussed.

Dynein-like cytoplasmic microtubule translocators

The eukaryotic flagellum presents an excellent predictive model of microtubule-mediated motility: movement is caused by microtubule translocators, called dyneins, which actively slide outer doublet microtubules against each other. Cytoplasmic movements, such as certain aspects of mitotic motion, may also be powered by dynein-like molecules. It is important, then, to carefully assess potential cytoplasmic dynein-like translocators by applying criteria defined by the properties of axonemal dynein. A cytoplasmic microtubule translocator may be only partially homologous to axonemal dynein; a modular construction may provide the translocator with domains that are shared with dynein, and with other domains that give it functional specificity. Finally, it is important to consider the possibility that a dynein-like enzyme that is found in the cytoplasm may not function in the cytoplasm but rather is awaiting incorporation into an axoneme.