Human body modeling method to simulate the biodynamic characteristics of spine in vivo with different sitting postures

Study on the biodynamic characteristics and internal vibration behaviors of a seated human body under biomechanical characteristics

To provide reference and theoretical guidance for establishing human body dynamics models and studying biomechanical vibration behavior, this study aimed to develop and verify a computational model of a three-dimensional seated human body with detailed anatomical structure under complex biomechanical characteristics to investigate dynamic characteristics and internal vibration behaviors of the human body. Fifty modes of a seated human body were extracted by modal method. The intervertebral disc and head motions under uniaxial white noise excitation (between 0 and 20 Hz at 1.0, 0.5 and 0.5 m/s2 r.m.s. for vertical, fore-aft and lateral direction, respectively) were computed by random response analysis method. It was found that there were many modes of the seated human body in the low-frequency range, and the modes that had a great impact on seated human vibration were mainly distributed below 13 Hz. The responses of different positions of the spine varied greatly under the fore-aft and lateral excitation, but the maximum stress was distributed in the lumbar under different excitations, which could explain why drivers were prone to lower back pain after prolonged driving. Moreover, there was a large vibration coupling between the vertical and fore-aft direction of an upright seated human body, while the vibration couplings between the lateral and other directions were very small. Overall, the study could provide new insights into not only the overall dynamic characteristics of the human body, but also the internal local motion and biomechanical characteristics under different excitations.

Effect of anteroposterior vibration frequency on the risk of lumbar injury in seated individuals

Few studies investigate the impact of anterior-posterior excitation frequency on the time-domain vibrational response and injury risk of the lumbar spine in seated individuals. Firstly, this study utilised a previously developed finite element model of an upright seated human body on a rigid chair without a backrest to investigate the modes that affect the anterior-posterior vibrations of the seated body. Subsequently, transient dynamic analysis was employed to calculate the lumbar spine's time-domain responses (displacement, stress, and pressure) and risk factors under anteroposterior sinusoidal excitation at varying frequencies (1-8 Hz). Modal analysis suggested the frequencies significantly affecting the lumbar spine's vibration were notably at 4.7 Hz and 5.5 Hz. The transient analysis results and risk factor assessment indicated that the lumbar responses were most pronounced at 5 Hz. In addition, risk factor assessment showed that long-term exposure to 8 Hz vibration was associated with a greater risk of lumbar injury.

Influence of muscle soft tissue and lower limbs on the vibration behavior of the entire spine inside the seated human body: A finite element study

The objective of the study is to investigate the vibration behavior of the entire spine inside the human body and the influence of muscle soft tissue and lower limbs on spinal response under vertical whole-body vibration. This study conducted modal and random response analyses to simulate the modal displacements and stress of all intervertebral discs in the vertical principal mode in the skeleton, upper, and whole body. Additionally, the acceleration response of intervertebral discs under vertical random excitation was investigated. The results revealed that removing muscle soft tissue and lower limbs significantly changed the resonant frequency, modal displacement, and stress. Particularly, there was a rapid increase in vertical displacement of the lumbar spine in the skeleton model. The reason for that was due to the lack of soft tissue to provide stability, leading to significant lumbar spine bending. Under random excitation, the fore-aft acceleration of intervertebral discs in the skeleton model was considerably larger than that in the whole body, especially in the lumbar spine where it can reach up to four times higher. Conversely, the vertical response of the intervertebral discs inside the human body model was 1.4-2.4 times larger than that of the skeleton model. Muscle soft tissue contributes to the strength of the spine, reducing fore-aft response. The muscle soft tissue in the gluteal region, connected below the spine, can lower the vertical natural frequency and attenuate spinal impact. Although the lower limbs enhance spinal stability, stimulation from the feet can superimpose vibrational responses in the spine.

Impact of Sacroiliac Interosseous Ligament Tension and Laxity on the Biomechanics of the Lumbar Spine: A Finite Element Study

OBJECTIVE

To investigate the influence of sacroiliac interosseous ligament tension and laxity on the biomechanics of the lumbar spine.

METHODS

A static analysis of a three-dimensional finite element model of the Lumbar-Pelvic is conducted to verify the model's effectiveness. Adjusting the sacroiliac ligament's elasticity modulus under a 10Nm lumbar flexion/extension moment, it simulates ligament tension/laxity to calculate vertebrae displacements, intervertebral disc stress and deformation, nucleus pulposus pressure, facet joint force, and ligament stress.

RESULTS

With the elastic modulus of the sacroiliac ligament changing by +50%, -50%, and -90%, the angular displacement of vertebra 3 in forward flexion changes by +1.64%, -4.84%, and -42.3%, and the line displacements change by +5.7%, -16.4%, and -144.9%, respectively; and the angular displacements in backward extension change by +0.2%, -0.6%, -5.9% and the line displacements change by +5.5%, -14.3%, and -125.8%. However, the angular displacement and center distance between adjacent vertebrae do not change, leading to no change in the maximum stress of the intervertebral disc and the maximum pressure in the nucleus pulposus. Flexion and extension directly affect the deformation and stress magnitude and distribution in the lumbar spine.

CONCLUSIONS

While sacroiliac interosseous ligament laxity and tension have little effect on disc deformation and stress, and nucleus pulposus pressure, they reduce the stability of the lumbar-sacral vertebrae. In a forward flexion state, the lumbar ligaments bear a large load and are prone to laxity, thereby increasing the risk of lumbar injury.

Finite element modelling and biodynamic response prediction of the seated human body exposed to whole-body vibration

Biodynamic modelling of seat-occupant systems can assist in seat comfort design. A finite element (FE) model of the seated human body, including detailed modelling of the lumbar spine, was established to reflect the human response to vibration and biodynamic response of the lumbar spine under whole-body vibration (WBV). The lumbar spine model was established and validated against the in-vitro results and calculated data. The posture of the lumbar spine was adjusted according to the radiological research results, and the adjusted model was combined to establish a FE model of the seated human body. The present seated human model with backrest inclination angles of 10, 20, and 30°, validated by comparing the measured apparent mass and seat-to-lumbar spine transmissibility, was used to calculate the biodynamic response of the lumbar spine with three inclined backrests under WBV. The results showed that the model could characterise the apparent mass, seat-to-lumbar spine transmissibility, and the biodynamic response of the lumbar spine. Practitioner summary: Biodynamic models can represent dynamic characteristics of the human body exposed to vibration and assist in seat comfort design. The three-dimensional FE model of the human body can be used to explore the human response to vibration and the biodynamic response of the lumbar spine under WBV.

Recommended maximum holding time of common static sitting postures of office workers

PURPOSE

A posture maintained for a long period can be harmful to the health of office workers. This study aimed to estimate the recommended ergonomic duration for maintaining different sitting postures.

MATERIALS AND METHODS

Forty healthy male and female students participated in this experiment designed to measure perceived discomfort caused by maintaining common static sitting postures of office workers in a simple ergonomic setup for four minutes. The Borg CR10 scale was given to the participants to assess the discomfort in different body parts, before and after each experiment. Based on the mean group discomfort level of 2, the recommended holding time of each posture was estimated.

RESULTS

The recommended holding time and its discomfort score for each studied posture were tabulated. The shortest holding time of a posture was obtained for the moderate neck flexion (1.61 minutes), and the longest holding time was obtained for legs posture with 90-degree knee flexion (6.45 minutes).

CONCLUSIONS

The recommended holding time in this study may help to assess the risk of Musculoskeletal Disorders in office workers and train the individuals involved in office tasks in proper sitting behavior.

Finite element analysis of the influence of three-joint spinal complex on the change of the intervertebral disc bulge and height

This study evaluated the changes of height and bulging occurring in individual layers of the annulus fibrosus of the intervertebral disc for 3 load scenarios (axial compression, flexion, and extension). The numerical model of a single motion segment of the thoracic spine was analysed for 2 different configurations, ie, for the model of a physiological segment and a segment with the posterior column removed. In the physiological segment, all annulus fibrosus layers decrease in height regardless of the applied load, bulging outside the intervertebral disc. Removal of the posterior column increases mobility and disrupts the load transfer system, with the lamellae bulging into the intervertebral disc.