Electrosurface phenomena at polymer films for biosensor applications

Polyurethane films formation from microcrystalline cellulose as a polyol and cellulose nanocrystals as additive: Reactions favored by the low viscosity of the source of isocyanate groups used

To simultaneously form films while synthesizing solvent-free and catalyst-free bio-based polyurethanes, hexamethylene diisocyanate trimer was selected as an isocyanate group source to produce a low-viscosity reaction medium for dispersing high contents of microcrystalline cellulose (MCC, polyol) and cellulose nanocrystals (CNC). Castor oil was used as an additional polyol source. Up to 80 % of the MCC was dispersed, producing a film exhibiting the highest T_g (72 °C), tensile strength (18 MPa), and Young's modulus (522.4 MPa). 12.5 % (30 % MCC) and 7.5 % (50 % MCC) of CNC dispersed in the reaction medium formed films stiffer than their counterparts. All the films exhibited transparency and high crystallinity. The contact angle/zeta potential (ζ) indicated hydrophobic film surfaces. At pH 7.4, ζ suggested that the films interacted with physiological fluids favorably. The films were non-cytotoxic, and the composites exhibited cell growth compared with the control. The reported results, as far as it is known, are unprecedented.

Engineering of Stable Cross-Linked Multilayers Based on Thermo-Responsive PNIPAM-Grafted-Chitosan/Heparin to Tailor Their Physiochemical Properties and Biocompatibility

The thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) is ubiquitously applied in controlled drug release and tissue engineering. However, the lack of bioactivity of PNIPAM restricts its use in cell-containing systems being a thermo-responsive adhesive substratum with no regulating effect on cell growth and differentiation. In this study, integrating PNIPAM with chitosan into PNIPAM-grafted-chitosan (PNIPAM-Chi) allows a layer-by-layer assembly with bioactive heparin to fabricate PNIPAM-modified polyelectrolyte multilayers (PNIPAM-PEMs). Grafting PNIPAM chains of either 2 (LMW) or 10 kDa (HMW) on the chitosan backbone influences the cloud point (CP) temperature in the range from 31 to 33 °C. PNIPAM-Chi with either a higher molecular weight or a higher degree of substitution of PNIPAM chains exhibiting a significant increase in diameter above CP as ensured by dynamic light scattering is selected to fabricate PEM with heparin as a polyanion at pH 4. Little difference of layer growth is detected between the chosen PNIPAM-Chi used as polycations by surface plasmon resonance, while multilayers formed with HMW-0.02 are more hydrated and show striking swelling-and-shrinking abilities when studied with quartz crystal microbalance with dissipation monitoring. Subsequently, the multilayers are covalently cross-linked using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide to strengthen the stability of the systems under physiological conditions. Ellipsometry results confirm the layer integrity after exposure to the physiological buffer at pH 7.4 compared to those without cross-linking. Moreover, significantly higher adhesion and more spreading of C3H10T1/2 multipotent embryonic mouse fibroblasts on cross-linked PEMs, particularly with heparin terminal layers, are observed owing to the bioactivity of heparin. The slightly more hydrophobic surfaces of cross-linked PNIPAM-PEMs at 37 °C also increase cell attachment and growth. Thus, layer-by-layer constructed PNIPAM-PEM with cross-linking represents an interesting cell culture system that can be potentially employed for thermally uploading and controlled release of growth factors that further promotes tissue regeneration.

Antimicrobial and photophysical properties of chemically grafted ultra-high-molecular-weight polyethylene

Surface of ultra-high-molecular-weight polyethylene (UHMWPE) was modified by chemical methods. Surface was firstly activated by Piranha solution and then grafted with selected amino-compounds (cysteamine, ethylenediamine or chitosan). The next step was grafting of some borane cluster compounds, highly fluorescent borane hydride cluster anti-B₁₈H₂₂ or its thiolated derivative 4,4'-(HS)₂-anti-B₁₈H₂₀. Polymer foils were studied using various methods to characterize surface chemistry (X-ray photoelectron spectroscopy), roughness and morphology (atomic force microscopy, scanning electron microscopy), chemistry and polarity (electrokinetic analysis), wettability (goniometry) and photophysical properties (UV-Vis spectroscopy) before and after modification steps. Subsequently some kinds of antimicrobial tests were performed. Immobilization of anti-B₁₈H₂₂ in small quantities onto UHMWPE surface leads to materials with a luminescence. Samples grafted with borane clusters showed significant inhibition of growth for gram-positive bacteria (S. epidermidis). These approaches can be used for (i) luminophores on the base of polymers nanocomposites development and/or (ii) preparation of materials with antimicrobial effects.

Surface Modification of Polymer Substrates for Biomedical Applications

While polymers are widely utilized materials in the biomedical industry, they are rarely used in an unmodified state. Some kind of a surface treatment is often necessary to achieve properties suitable for specific applications. There are multiple methods of surface treatment, each with their own pros and cons, such as plasma and laser treatment, UV lamp modification, etching, grafting, metallization, ion sputtering and others. An appropriate treatment can change the physico-chemical properties of the surface of a polymer in a way that makes it attractive for a variety of biological compounds, or, on the contrary, makes the polymer exhibit antibacterial or cytotoxic properties, thus making the polymer usable in a variety of biomedical applications. This review examines four popular methods of polymer surface modification: laser treatment, ion implantation, plasma treatment and nanoparticle grafting. Surface treatment-induced changes of the physico-chemical properties, morphology, chemical composition and biocompatibility of a variety of polymer substrates are studied. Relevant biological methods are used to determine the influence of various surface treatments and grafting processes on the biocompatibility of the new surfaces-mammalian cell adhesion and proliferation is studied as well as other potential applications of the surface-treated polymer substrates in the biomedical industry.

Combined microslit electrokinetic measurements and reflectometric interference spectroscopy to study protein adsorption processes

Streaming potential/current measurements for the characterization of charge formation processes at solid/liquid interfaces were combined with reflectometric interference spectroscopy. The simultaneous determination of electrosurface characteristics and the optical thickness of interfacial layers provides information on structural variations of adsorbed or covalently bound polymers and on charge dependent adsorption and desorption phenomena at solid/liquid interfaces. To demonstrate the potentialities of this extended approach for biointerfacial studies the authors report a series of experiments on the adsorption of the plasma protein fibrinogen at poly(octadecene-alt-maleic acid) thin films.

Electrokinetic fingerprinting of grafted polyelectrolyte layers--a theoretical approach

Electrokinetic fingerprinting (EF) was introduced by Marlow and Rowell [Marlow BJ, Rowel RL. Langmuir 1990;6:1088] for the comprehensive characterization of charged particle surfaces. Afterwards, EF was applied by many groups for the characterization of "hard" (i.e. non-swelling) surfaces. However, the advantages of EF could not yet utilized for the characterization of grafted polyelectrolyte layers (PL) since the theoretical background was not yet elaborated. A theory for the characterization of PL at complete dissociation of the functional groups was developed by Ohshima [Adv Colloid Interface Sci 1995;62:189] and later extended by Dukhin et al. [Dukhin S, Zimmermann R, Werner C. J Colloid Interface Sci 2005;286:761] for any degree of dissociation. Further progress in the characterization of soft surfaces may be achieved by combining EF and surface conductivity (SC) measurements. Both theory and experiment demonstrate that integrated measurements of SC and apparent zeta potential zeta(a) in broad ranges of pH and ionic strength provide information about Donnan potential Psi(D), surface charge, pK and surface potential Psi(0), while the interpretation is more uncertain, when only zeta(a) is measured. This advanced method of PL characterization is established for PL grafted on flat surfaces. When PL are formed on spherical particles, the SC may be measured by means of conductometry and/or dielectric spectroscopy. However, the current theories can only be applied within a rather narrow range of the practically relevant conditions. To overcome this limitation, an unified approach to the theory of electrophoresis for spherical particles with grafted PL was elaborated taking into account the existence of two different electrokinetic models for soft surfaces. While one model is focused on hydrodynamic permeability of soft surface and disregards surface current, another model considers the surface current and disregards electrokinetic water transport within the soft surface layer. Unification became possible through generalization of the capillary osmosis theory over soft surfaces.

Electrokinetic phenomena at grafted polyelectrolyte layers

During the last decades the electrokinetic theory of Smoluchowski (Z. Phys. Chem. 92 (1918) 129) was extended to be applicable for soft surfaces (grafted polyelectrolyte layers (PL), biological and artificial membranes, etc.) by either using the Debye approximation or numerical solutions. In the theory of Ohshima (Colloids Surf. A 103 (1995) 249) the nonlinearized Poisson-Boltzmann (PB) equation for thick and uniform PL is solved analytically and a general hydrodynamic equation is derived in an integral form. These advantages in the theory of Ohshima provided a base for the further development of a generalized electrokinetic theory for soft surfaces. In his theory the final equation for the electroosmotic (electrophoretic) velocity is specified for the case of the complete dissociation of ionic sites within PL. Accordingly, the equation may be used only if the difference between pK and pH is very large. However, it turned out that an analytical solution of the nonlinearized PB equation for thick PL is possible for any degree of dissociation. This was achieved using the approximation of excluded coions if the absolute value of the reduced Donnan potential is larger than 2 and due to the simplification in the case of weak dissociation, when the absolute value of the reduced Donnan potential is less than 2. Combining this generalized double layer (DL) theory for PL and the theory of Ohshima enables to obtain an analytical equation for electroosmosis for the general case of any degree of dissociation. This equation creates for the first time a theoretical base for the interpretation of electrokinetic fingerprinting (EF) for the characterization of soft surfaces.