Scanning Electron Microscopy Investigation of Molecular Transport and Reactivity within Polymer Brushes

Analysing single live cells by scanning electrochemical microscopy

Scanning electrochemical microscopy (SECM) offers single live cell activities along its topography toward cellular physiology and pathology.

Modulation of the Electrochemical Reactivity of Solubilized Redox Active Polymers via Polyelectrolyte Dynamics

Redox active polymers (RAPs) are electrochemically versatile materials that find key applications in energy storage, sensing, and surface modification. In spite of the ubiquity of RAP-modified electrodes, a critical knowledge gap exists in the understanding of the electrochemistry of soluble RAPs and their relation to polyelectrolyte dynamics. Here, we explore for the first time the intersection between polyelectrolyte behavior and the electrochemical response that highly soluble and highly substituted RAPs with viologen, ferrocene, and nitrostyrene moieties elicit at electrodes. This comprehensive study of RAP electrolytes over several orders of magnitude in concentration and ionic strength reveals distinct signatures consistent with surface confined, colloidal, and bulk-like electrochemical behavior. These differences emerge across polyelectrolyte packing regimes and are strongly modulated by changes in RAP coil size and electrostatic interactions with the electrode. We found that, unlike monomer motifs, simple changes in the ionic strength caused variations over 1 order of magnitude in the current measured at the electrode. In addition, the thermodynamics of adsorbed RAP films were also affected, giving rise to standard reduction potential shifts leading to redox kinetic effects as a result of the mediating nature of the RAP film in equilibrium with the solution. Full electrochemical characterization via transient and steady-state techniques, including the use of ultramicroelectrodes and the rotating disk electrode, were correlated to dynamic light scattering, ellipsometry, and viscometric analysis. These methods helped elucidate the relationship between electrochemical behavior and RAP coil size, film thickness, and polyelectrolyte packing regime. This study underscores the role of electrostatics in modulating the reactivity of redox polyelectrolytes.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Mapping Cd²⁺-induced membrane permeability changes of single live cells by means of scanning electrochemical microscopy

Scanning Electrochemical Microscopy (SECM) is a powerful, non-invasive, analytical methodology that can be used to investigate live cell membrane permeability. Depth scan SECM imaging allowed for the generation of 2D current maps of live cells relative to electrode position in the x-z or y-z plane. Depending on resolution, one depth scan image can contain hundreds of probe approach curves (PACs). Individual PACs were obtained by simply extracting vertical cross-sections from the 2D image. These experimental PACs were overlaid onto theoretically generated PACs simulated at specific geometry conditions. Simulations were carried out using 3D models in COMSOL Multiphysics to determine the cell membrane permeability coefficients at different locations on the surface of the cells. Common in literature, theoretical PACs are generated using a 2D axially symmetric geometry. This saves on both compute time and memory utilization. However, due to symmetry limitations of the model, only one experimental PAC right above the cell can be matched with simulated PAC data. Full 3D models in this article were developed for the SECM system of live cells, allowing all experimental PACs over the entire cell to become usable. Cd(2+)-induced membrane permeability changes of single human bladder (T24) cells were investigated at several positions above the cell, displaced from the central axis. The experimental T24 cells under study were incubated with Cd(2+) in varying concentrations. It is experimentally observed that 50 and 100 μM Cd(2+) caused a decrease in membrane permeability, which was uniform across all locations over the cell regardless of Cd(2+) concentration. The Cd(2+) was found to have detrimental effects on the cell, with cells shrinking in size and volume, and the membrane permeability decreasing. A mapping technique for the analysis of the cell membrane permeability under the Cd(2+) stress is realized by the methodology presented.

A time course study of cadmium effect on membrane permeability of single human bladder cancer cells using scanning electrochemical microscopy

Cd(2+) is carcinogenic to both humans and experimental animals. We present quantitative time-course imaging of Cd(2+)-induced variation in the membrane permeability of single live human bladder cancer cells (T24) to ferrocenemethanol using scanning electrochemical microscopy (SECM). High temporal resolution combined with non-invasive nature renders a time-lapse SECM depth scan, a promising method to quantitatively investigate the effectiveness, kinetics, and mechanism of metal ions based on the responses of single live cells in real time. Under unstimulated conditions, T24 cells have constant membrane permeability to ferrocenemethanol of approximately 5.0×10(-5) m/s. When cadmium is added in-situ to T24 cells, the membrane permeability increases up to 3.5×10(-4) m/s, allowing more flux of ferrocenemethanol to the ultramicroelectrode tip. This suggests an increased spreading between the phospholipid heads in the cytoplasmic membrane. Membrane permeability might be used as a measure to probe cell status in practical intoxication cases. The methodology reported here can be applied to many other metals and their interactions with extracellular biomolecules, leading insights into cell physiology and pathobiology.

Scanning electrochemical microscopy monitoring in microcantilever platforms

The deflection of cantilever systems may be performed by an indirect electrochemical method that consists of measuring the local cantilever activity and deflection in a feedback generation-collection configuration of the SECM. This is illustrated during the electrochemically assisted adsorption of Br onto a gold-coated cantilever, either in its pristine state or previously coated with a thin organic barrier. It is further extended to the adsorption of an antibody in a heterogeneous immunoassay at an allergen-coated microcantilever platform. In both reactions, the cantilever deflection is qualitatively detected from the SECM tip current measurement and a quantitative estimate is obtained through modeling. This electroanalytical strategy provides an alternative approach to standard optical detection. It can overcome some limitations of the optical method by allowing electrochemical characterization of nonconductive cantilevers and appropriate use for closed systems.

Immobilization of magnetic nanoparticles onto conductive surfaces modified by diazonium chemistry

Core-shell γ-Fe(2)O(3)@SiO(2) nanoparticles (NPs) substituted by PEG and NH(2) groups may be immobilized on metal surfaces (glassy carbon or gold) substituted by 4-carboxyphenyl groups through electrostatic interactions. Such immobilization is evidenced by (i) IRRAS owing to the Si-O band, (ii) SEM images, which show that the surface coverage by the NPs is nearly 100%, and (iii) the NPs film thickness measured by ellipsometry or AFM, which corresponds to about one NPs monolayer. Such NPs film is permeable to redox probes, which allows us to propose electrochemical methods based on direct or local measurements as a way to inspect the NPs assembly steps through their ability to alter mass and charge transfer. This process also applies to patterned polystyrene surfaces, and selective immobilization of NPs substituted by amino groups was carried out onto submillimeter patterns obtained by local oxidation. Biological applications are then expected for hyperthermia activation of the NPs to trigger cellular death. Finally, some tests were performed to further derivatize the immobilized NPs onto surfaces through either a covalent bond or electrostatic interactions. Future work will be dedicated to the recovery of such Janus NPs from the substrate surface.

Patterning of polystyrene by scanning electrochemical microscopy. Biological applications to cell adhesion

Polystyrene surfaces may be patterned by Ag(II), NO(3)(•), and OH(•) electrogenerated at the tip of a scanning electrochemical microscope. These electrogenerated reagents lead to local surface oxidation of the polymer. The most efficient surface treatment is obtained with Ag(II). The patterns are evidenced by XPS and IR and also by the surface wettability contrast between the hydrophobic virgin surface and the hydrophilic pattern. Such Ag(II) treatment of a polystyrene Petri dish generates discriminative surfaces able to promote or disfavor the adhesion of proteins and also the adhesion and growth of adherent cells. The process is also successfully applied to a cyclo-olefin copolymer and should be suitable to pattern any hydrogenated polymer.

Nitrophenyl groups in diazonium-generated multilayered films: which are electrochemically responsive?

Various nitrophenyl-containing organic layers have been electrografted to glassy carbon surfaces using diazonium chemistry to elucidate the extent by which the layer structure influences the solvent (i.e., acetonitrile) accessibility, electroactivity, and chemical reactivity of the films. For most of these films, cyclic voltammetric and impedance spectroscopy measurements show that the electron-transfer process at the electrode is facile and independent of film thickness and structure. This is consistent with the occurrence of self-mediated electron transfers throughout the film with nitrophenyl groups serving as redox stations. Importantly, this behavior is seen only after the first potential sweep, the effect of which is to increase the porosity of the layer by inducing an irreversible desorption of nonchemisorbed material along with a reorganization of the film structure. From a kinetic point of view, the radical anions of surface-attached nitrophenyl groups are reactive toward the residual water present in acetonitrile. Thin layers (thickness of 1 to 2 nm) containing redox-active groups only in the outer part of the layer are protonated two to three times as fast as groups located in a more hydrophobic but still solvent-accessible inner layer. Hence, kinetic measurements can detect small differences in the layer environment. Finally, a deconvolution of the cyclic voltammetric response of an electrode grafted from 4-nitrobenzenediazonium discloses that roughly 25% of the overall signal can be attributed to the presence of 4-azonitrophenyl moieties introduced during the electrografting process.