Defective α-Fe2O3(0001): An ab Initio Study

Advances in Bioresorbable Triboelectric Nanogenerators

With the growing demand for next-generation health care, the integration of electronic components into implantable medical devices (IMDs) has become a vital factor in achieving sophisticated healthcare functionalities such as electrophysiological monitoring and electroceuticals worldwide. However, these devices confront technological challenges concerning a noninvasive power supply and biosafe device removal. Addressing these challenges is crucial to ensure continuous operation and patient comfort and minimize the physical and economic burden on the patient and the healthcare system. This Review highlights the promising capabilities of bioresorbable triboelectric nanogenerators (B-TENGs) as temporary self-clearing power sources and self-powered IMDs. First, we present an overview of and progress in bioresorbable triboelectric energy harvesting devices, focusing on their working principles, materials development, and biodegradation mechanisms. Next, we examine the current state of on-demand transient implants and their biomedical applications. Finally, we address the current challenges and future perspectives of B-TENGs, aimed at expanding their technological scope and developing innovative solutions. This Review discusses advancements in materials science, chemistry, and microfabrication that can advance the scope of energy solutions available for IMDs. These innovations can potentially change the current health paradigm, contribute to enhanced longevity, and reshape the healthcare landscape soon.

Functionalized Ferrocene Enables Selective Electrosorption of Arsenic Oxyanions over Phosphate─A DFT Examination of the Effects of Substitutional Moieties, pH, and Oxidation State

Ferrocene (Fc)/ferrocenium (Fc+)-decorated carbon nanotube electrode materials have shown promise for selectively adsorbing arsenic (As) over dissimilar anions like Cl- and ClO4-, and isostructural transition-metal oxyanions for water remediation; however, the competition between same-group oxyanions (such as arsenate vs phosphate) is underexplored and poorly understood. We use ab initio calculations to examine the competitive binding of As(V), P(V), and As(III) to Fc/Fc+ with and without functional substitutions (OH, SH, NH2, COOH, CH3, C2H5, NO2, and Cl). This work aims to understand factors that induce the selective binding of toxic arsenic over phosphate. We find that neat Fc cannot distinguish the three oxyanions because physical forces (electrostatics and dispersion) dominate the Fc-oxyanion interactions. However, combined oxidation and substitution effects enable selectivity for As(V) over P(V). Oxidation of Fc to Fc+ allows the formation of Fc+-oxyanion covalent bonds with varying donor-acceptor character depending on the oxyanion. Additionally, NH2 and SH groups that donate charge to the base Fc+ molecule and H-bond to oxyanion induce an energetic preference for As(V) over P(V) by -0.23 and -0.13 eV, respectively. Differences in pKa between As(V)/P(V) and As(III) preclude any preference for As(III) over the other anions. Using the calculated energetics, we predict the pH-dependent binding selectivity of functionalized ferrocenium. These findings demonstrate the challenges of Fc/Fc+-oxyanion interaction for selective binding and provide a path for identifying other molecules and substituents for efficient metallocene adsorbent design.

An Ultrasound-Induced Self-Clearance Hydrogel for Male Reversible Contraception

Nearly half of pregnancies worldwide are unintended mainly due to failure of contraception, resulting in negative effects on women's health. Male contraception techniques, primarily condoms and vasectomy, play a crucial role in birth control, but cannot be both highly effective and reversible at the same time. Herein, an ultrasound (US)-induced self-clearance hydrogel capable of real-time monitoring is utilized for in situ injection into the vas deferens, enabling effective contraception and noninvasive recanalization whenever needed. The hydrogel is composed of (i) sodium alginate (SA) conjugated with reactive oxygen species (ROS)-cleavable thioketal (SA-tK), (ii) titanium dioxide (TiO₂), which can generate a specific level of ROS after US treatment, and (iii) calcium chloride (CaCl₂), which triggers the formation of the hydrogel. For contraception, the above mixture agents are one-time injected into the vas deferens, which can transform from liquid to hydrogel within 160 s, thereby significantly physically blocking the vas deferens and inhibiting movability of sperm. When fertility is needed, a noninvasive remedial ultrasound can make TiO₂ generate ROS, which cleaves SA-tK to destroy the network of the hydrogel. Owing to the recanalization, the refertility rate is restored to 100%. Meanwhile, diagnostic ultrasound (D-US, 22 MHz) can monitor the occlusion and recanalization process in real-time. In summary, the proposed hydrogel contraception can be a reliable, safe, and reversible male contraceptive strategy that addresses an unmet need for men to control their fertility.

Highly active and stable hydrogen production by room-temperature formaldehyde oxidation on Fe2O3/Pd

Fe2O3/Pd catalysts were prepared by impregnation and coprecipitation methods, and exhibit a high and stable hydrogen production rate of 293.98 mL min−1 g−1 with a Pd loading of 1 wt% at 298 K.

DFT insights into electrocatalytic CO2 reduction to methanol on α-Fe2O3(0001) surfaces

Electrocatalytic reduction of CO₂ to manufacture fuels and other useful chemicals is one of the appealing methods to reuse CO₂. Herein, electrocatalytic CO₂ reduction on a model α-Fe₂O₃(0001) surface catalyst has been investigated by means of density functional theory. This systematic study, involving 20 reaction intermediates and 63 distinct elementary reaction steps, has allowed the identification of a novel mechanism for the decomposition of the key intermediate *COOH. Methanol is the preferred product, with an overpotential of 0.8 V, over carbon monoxide (CO), formic acid (HCOOH), and formaldehyde (CH₂O). Formaldehyde formed on the surface will be converted into methanol. This work demonstrates the need for a complete investigation of possible pathways to find the most favourable one, beyond chemical intuition. Moreover, it suggests that hematite could be an interesting material for CO₂ reduction.

Structural Evolution of α-Fe2O3(0001) Surfaces Under Reduction Conditions Monitored by Infrared Spectroscopy

The precise determination of the surface structure of iron oxides (hematite and magnetite) is a vital prerequisite to understand their unique chemical and physical properties under different conditions. Here, the atomic structure evolution of the hematite (0001) surface under reducing conditions was tracked by polarization-resolved infrared reflection absorption spectroscopy (IRRAS) using carbon monoxide (CO) as a probe molecule. The frequency and intensity of the CO stretch vibration is extremely sensitive to the valence state and electronic environments of surface iron cations. Our comprehensive IRRAS results provide direct evidence that the monocrystalline, stoichiometric α-Fe₂O₃(0001) surface is single Fe-terminated. The initial reduction induced by annealing at elevated temperatures produces surface oxygen vacancies, where the excess electrons are localized at adjacent subsurface iron ions (5-fold coordinated). A massive surface restructuring occurs upon further reduction by exposing to atomic hydrogen followed by Ar⁺-sputtering and annealing under oxygen poor conditions. The restructured surface is identified as a Fe₃O₄(111)/Fe_1−xO(111)-biphase exposing both, Fe³⁺ and Fe²⁺ surface species. Here the well-defined surface domains of Fe₃O₄(111) exhibit a Fe_oct2-termination, while the reduced Fe_1−xO(111) is Fe²⁺(oct)-terminated. These findings are supported by reference IRRAS data acquired for CO adsorption on magnetite (111) and (001) monocrystalline surfaces.

X-ray Photoelectron Spectroscopy of Fast-Frozen Hematite Colloids in Aqueous Solutions. 6. Sodium Halide (F-, Cl-, Br-, I-) Ion Binding on Microparticles

Electrolyte ion binding at mineral surfaces is central to the generation of surface charge and key to electric double-layer formation. X-ray photoelectron spectroscopy of fast-frozen (-170 °C) mineral wet pastes provides a means to study weakly bound electrolyte ions at the mineral/water interface. In this study, we build upon a series of articles devoted to ion binding at hematite (α-Fe₂O₃) particle surfaces to resolve the nature of sodium halide ion binding. Measurements on micron-sized hematite particles terminated by the charged and amphoteric (012) and the relatively uncharged (001) faces point to the formation of salt loadings of similar composition to those of cryosalts of NaCl, NaBr, NaI, and NaF. These coatings could be likened to those of the better-known hydrohalite (NaCl·2H₂O) phase, one that typically forms under concentrated (≫0.1 M) aqueous solutions of NaCl under freezing conditions. As we have previously shown that these reaction products do not occur in nanosized hematite particles, our work points to the involvement of the basal (001) face and/or the juxtaposition of these faces in packed tabular microparticles of hematite (1-3 μm in width) in stabilizing these cryosalts. One possible formation pathway involves first-layer Na⁺ and Cl^- ions serving as an anchoring layer for a topotactic-like growth of amorphous to low-crystalline salt hydrates at the (001) face. Thus, by contrasting reaction products of four sodium halides at surfaces of tabular microparticles of hematite, this work revealed the formation of cryosalt-like solids. The formation of such solids may have especially important ramifications to ice nucleation mechanisms in the atmosphere, as well as in saline permafrosts on Earth and on planet Mars where salt-laden mineral particles prevail.

Characterization of peroxo reaction intermediates in the water oxidation process on hematite surfaces

We use density functional theory-based calculations to study structural, electronic, and magnetic properties of two key reaction intermediates on a hematite, [Formula: see text]-Fe₂O₃, photoanode during the solar-driven water splitting reaction. Both intermediates contain an oxygen atom bonded to a surface iron atom. In one case, the adsorbed oxygen also forms a peroxo bond with a lattice oxygen from hematite; in the second case no such bond is formed. Both configurations are energetically equivalent and are related to the overpotential-determining step in the oxygen evolution reaction. The calculated reaction path for the breaking of the peroxo bond shows a barrier of about 0.86 eV for the transformation between the two intermediates. We explain this high barrier with the drastically different electronic and magnetic structure, which we also analyze using maximally localized Wannier functions. Photo-generated electron holes are shown to localize preferentially close to the reaction center at the surface in both configurations. In the case of the oxo species, this localization favors subsequent electron transfer steps during the oxygen evolution cycle. In the case of the peroxo configuration, this fact together with the high barrier for breaking the oxygen-oxygen bond indicates a possible loss mechanism due to hole trapping. Graphical Abstract Calculated spin density at a hematite surface with peroxo intermediate.

Theoretical and experimental investigations of mercury adsorption on hematite surfaces

One of the biggest environmental concerns caused by coal-fired power plants is the emission of mercury (Hg), which is toxic metal. To control the emission of Hg from coal-derived flue gas, it is important to understand the behavior and speciation of Hg as well as the interaction between Hg and solid materials in the flue gas stream. In this study, atomic-scale theoretical investigations using density functional theory (DFT) were carried out in conjunction with laboratory-scale experimental studies to investigate the adsorption behavior of Hg on hematite (α-Fe₂O₃). According to the DFT simulation, the adsorption energy calculation proposes that Hg physisorbs to the α-Fe₂O₃(0001) surface with an adsorption energy of -0.278 eV, and the subsequent Bader charge analysis confirms that Hg is slightly oxidized. In addition, Cl introduced to the Hg-adsorbed surface strengthens the Hg stability on the α-Fe₂O₃(0001) surface, as evidenced by a shortened Hg-surface equilibrium distance. The projected density of states (PDOS) analysis also suggests that Cl enhances the chemical bonding between the surface and the adsorbate, thereby increasing the adsorption strength. In summary, α-Fe₂O₃ has the ability to adsorb and oxidize Hg, and this reactivity is enhanced in the presence of Cl. For the laboratory-scale experiments, three types of α-Fe₂O₃ nanoparticles were prepared using the precursors Fe(NO₃)₃, Fe(ClO₄)₃, and FeCl₃, respectively. The particle shapes varied from diamond to irregular stepped and subrounded, and particle size ranged from 20 to 500 nm depending on the precursor used. The nanoparticles had the highest surface area (84.5 m²/g) due to their highly stepped surface morphology. Packed-bed reactor Hg exposure experiments resulted in this nanoparticles adsorbing more than 300 μg Hg/g. The Hg L_III-edge extended X-ray absorption fine structure spectroscopy also indicated that HgCl₂ physisorbed onto the α-Fe₂O₃ nanoparticles.

IMPLICATIONS

Atomic-scale theoretical simulations proposes that Hg physisorbs to the α-Fe₂O₃(0001) surface with an adsorption energy of -0.278 eV, and the subsequent Bader charge analysis confirms that Hg is slightly oxidized. In addition, Cl introduced to the Hg-adsorbed surface strengthens the Hg stability on the α-Fe₂O₃(0001) surface, as evidenced by a shortened Hg-surface equilibrium distance. The PDOS analysis also suggests that Cl enhances the chemical bonding between the surface and the adsorbate, thereby increasing the adsorption strength. Following laboratory-scale experiment of Hg sorption also shows that HgCl₂ physisorbs onto α-Fe₂O₃ nanoparticles which have highly stepped structure.

Ab initio simulations of water splitting on hematite

In recent years, hematite has attracted great interest as a photocatalyst for water splitting, but many questions remain unanswered about the mechanisms and the main limiting factors. For this reason, density functional theory has been used to understand the optical, electronic and chemical properties of this material at an atomistic level. Bulk doping can be used to reduce the band gap, and to increase photoabsorption and charge mobility. Charge transport takes place through adiabatic polaron hopping. The stable (0 0 0 1) surface has a stoichiometric termination when exposed to oxygen, it becomes hydroxylated in water, and it has an oxygen-rich termination under illumination in a photoelectrochemical setup. On the oxygen-rich termination, surface states are present that might act as recombination centres for electrons and holes. On the contrary, on the hydroxylated termination surface states appear only on reaction intermediates. The intrinsic surface states disappear in the presence of an overlayer of gallium oxide. The reaction of water oxidation is assumed to proceed by four proton-coupled electron transfers and it is shown to involve a nucleophilic attack with the formation of an OOH group. Calculated overpotentials are in the range of 0.5-0.6 V. Open questions and future research directions are briefly discussed.

Identifying the bottleneck of water oxidation by ab initio analysis of in situ optical absorbance spectrum

Hematite's (α-Fe₂O₃) major limitation to efficiently splitting water using sunlight is the low rate of the oxygen evolution reaction (OER).

Nitrogen electrochemically reduced to ammonia with hematite: density-functional insights

Licht et al. (Science, 2014, 345, 637) recently proposed a procedure to synthesize NH3 from N2 and by steam electrolysis in molten hydroxide suspensions of nano-Fe2O3. This highly exciting investigation undoubtedly boosts the hope of the CO2-free and low-cost ammonia industry. To provide insights at the atomistic level into the reduction process of N2, we have carried out a density-functional study on the electrochemical formation of NH3 molecules on hematite(0001) surfaces. By considering associative and dissociative mechanisms, we have identified a reaction path that requires an applied bias of -1.1 V to allow the proton transfer processes to occur downhill. The most energy-demanding step is the addition of the first proton to the adsorbed molecular nitrogen. The computed bias is in good agreement with experimental electrolysis potentials that activate the electric current.