Ethylene Epoxidation with Nitrous Oxide over Fe-BTC Metal-Organic Frameworks: A DFT Study

Theoretical investigation of the carbonyl-ene reaction between encapsulated formaldehyde and propylene over M-Cu-BTC paddlewheels (M= Be, Mg, and Ca): A DFT study

Formaldehyde is a VOC gas that plays a key role in air pollution. To limit emissions into the environment, the utilization of this waste as a raw material is a promising way. In this work, the M06-L functional calculation was used to investigate the structure, electronic properties, and catalytic activity of group IIA metals (Be, Mg, and Ca) partial substitution on Cu-BTC paddlewheels for formaldehyde encapsulation and carbonyl-ene reaction with propylene. Formaldehyde is absorbed by the metal center of the paddlewheel via its oxygen atom. The adsorption of formaldehyde on the substituted metal sites increased as compared to the parent Cu-BTC which can facilitate formaldehyde to react with propylene. The adsorption free energies are predicted to be -15.1 (Be-Cu-BTC), -14.7 (Mg-Cu-BTC), and -14.5 (Ca-Cu-BTC) kcal mol-1, respectively. The substituted metal has a slight effect on the Lewis acidity of the Cu ion in the paddlewheel. The adsorption free energy of formaldehyde, similar to that found in the pristine Cu-BTC, is observed. For the carbonyl-ene reaction, the reaction is proposed via a single step involving the C-C bond formation between two reactants and one hydrogen of propylene methyl group moves to formaldehyde oxygen, simultaneously. It was found that the substituted metals do not affect the catalytic performance of the Cu center for this reaction. The activation energies for the reaction at the Cu center are in the range of 22.0-23.4 kcal mol-1, which are slightly different from Cu-BTC (21.5 kcal mol-1). Interestingly, the catalytic activity of this reaction on the substituted metal is greater than that on the Cu center. The catalytic activities are in the order Be-Cu-BTC (13.3 kcal mol-1) > Mg-Cu-BTC (15.9 kcal mol-1) > Ca-Cu-BTC (17.8 kcal mol-1). Among them, the Be site of the bimetallic Be-Cu-BTC paddlewheel is predicted as a promising candidate catalyst.

Development of Amine-Functionalized Metal-Organic Frameworks Hollow Fiber Mixed Matrix Membranes for CO2 and CH4 Separation: A Review

CO2 separation from raw natural gas can be achieved through the use of the promising membrane-based technology. Polymeric membranes are a known method for separating CO2 but suffer from trade-offs between its permeability and selectivity. Therefore, through the use of mixed matrix membranes (MMMs) which utilizes inorganic or hybrid fillers such as metal-organic frameworks (MOFs) in polymeric matrix, the permeability and selectivity trade-off can be overcome and possibly surpass the Robeson Upper Bounds. In this study, various types of MOFs are explored in terms of its structure and properties such as thermal and chemical stability. Next, the use of amine and non-amine functionalized MOFs in MMMs development are compared in order to investigate the effects of amine functionalization on the membrane gas separation performance for flat sheet and hollow fiber configurations as reported in the literature. Moreover, the gas transport properties and various challenges faced by hollow fiber mixed matrix membranes (HFMMMs) are discussed. In addition, the utilization of amine functionalization MOF for mitigating the challenges faced is included. Finally, the future directions of amine-functionalized MOF HFMMMs are discussed for the fields of CO2 separation.

Density Functional Investigation of the Conversion of Furfural to Furfuryl Alcohol by Reaction with i-Propanol over UiO-66 Metal-Organic Framework

Carbonyl C═O bond reduction via catalytic transfer hydrogenation (CTH) is one of the essential processes for biomass conversion to valuable chemicals and fuels. Here, we investigate the CTH of furfural to furfuryl alcohol with i-propanol on UiO-66 metal-organic frameworks using density functional theory calculations and linear scaling relations. Initially, the reaction over two defect sites presented on Zr-UiO-66, namely, dehydrated and hydrated sites, have been compared. The hydrated active site is favored over that on the dehydrated active site since the activation free energy of the rate-determining reaction step occurring on the hydrated active site is lower than that occurring on the dehydrated active site (14.9 vs 17.9 kcal/mol). The catalytic effect of exchanged tetravalent metals (Hf and Ti) on Zr-UiO-66 is also considered. We found that Hf-UiO-66 (13.5 kcal/mol) provides a lower activation energy than Zr-UiO-66 (14.9 kcal/mol) and Ti-UiO-66 (19.4 kcal/mol), which corresponds to it having a higher Lewis acidity. The organic linkers of UiO-66 MOFs play a role in stabilizing all of the species on potential energy surfaces. The linear scaling relationship also reveals the significant role of the UiO-66 active site in activating the carbonyl C═O of furfural, and strong relationships are observed between the activation free energy, the charge of the metal at the MOF active sites, and the complexation energies in reaction coordinates.

Dehydrogenation of ethanol to acetaldehyde with nitrous oxide over the metal-organic framework NU-1000: a density functional theory study

The conversion of ethanol to more valuable hydrocarbon compounds receives great attention in chemical industries because it could diminish the dependency on petroleum as raw material. We investigate the catalytic performance of Fe-supported MOF NU-1000 for the dehydrogenation of ethanol to acetaldehyde with nitrous oxide (N2O) by deriving the relevant reaction profiles with density functional theory calculations. In the proposed mechanism, the activation barrier of the rate-determining step is almost four times lower in the presence of N2O than without it. The supported NU-1000 framework plays also important role since it facilitates electron transfers and stabilizes all species along the reaction coordinate. When considering the catalytic activity of tetravalent metal centers (Zr, Hf and Ti) substituted into NU-1000 it is found that their activity decreases in the order Hf ≥ Zr > Ti, based on activation energies and turnover frequencies (TOF). Concerning MOF linkers, we show that the catalytic activity is not further improved by functionalizing NU-1000 with either electron-donating or electron-withdrawing organic groups.

Phenol Tautomerization Catalyzed by Acid-Base Pairs in Lewis Acidic Beta Zeolites: A Computational Study

We investigate the tautomerization of phenol catalyzed by acid-base active pair sites in Lewis acidic Beta zeolites by means of density functional calculations using the M06-L functional. An analysis of the catalytic mechanism shows that hafnium on the Beta zeolite causes the strongest absorption of phenol compared to zirconium, tin, and germanium. This can be rationalized by the highest delocalization of electron density between the Lewis site and the oxygen of phenol which can in turn be quantified by the perturbative E⁽²⁾ stabilization energy. The reaction is assumed to proceed in two steps, the phenol O-H bond dissociation and the protonation of the intermediate to form the cyclohexa-2,4-dien-1-one product. The rate determining step is the first one with a free activation energy of 26.3, 25.0, 22.1 and 22.7 kcal mol^-1 for Ge-Beta, Sn-Beta, Zr-Beta, and Hf-Beta zeolites, respectively. The turnover frequencies follow these reaction barriers. Hence, the intrinsic catalytic activity of the Lewis acidic Beta zeolites studied here is in the order of Hf-Beta≈Zr-Beta>Sn-Beta> Ge-Beta for the tautomerization of phenol.

Computational study of the carbonyl-ene reaction between formaldehyde and propylene encapsulated in coordinatively unsaturated metal-organic frameworks M3(btc)2 (M = Fe, Co, Ni, Cu and Zn)

The carbonyl-ene reaction between encapsulated formaldehyde and propylene over the coordinatively unsaturated metal-organic frameworks M3(btc)2 (M = Fe, Co, Ni, Cu and Zn) has been investigated by means of density functional calculations. Zn3(btc)2 adsorbs formaldehyde strongest due to electron delocalization between Zn and the oxygen atom of the reactant molecule. The reaction is proposed to proceed in a single step involving proton transfer and carbon-carbon bond formation. We find the relative catalytic activity to be Zn3(btc)2 > Fe3(btc)2 ≥ Co3(btc)2 > Ni3(btc)2 > Cu3(btc)2, based on activation energy and turnover frequencies (TOF). The low activation energy for Zn3(btc)2 compared to the others can be explained by the delocalization of electron density between the carbonyl bond and the catalyst active sites, leading to a more stable transition state. The five MOFs are used to propose a descriptor for the relationship between activation energy on one side and electronic properties or adsorption energies on the other side in order to allow a quick screening of other catalytic materials for this reaction.

A computational study of the catalytic aerobic epoxidation of propylene over the coordinatively unsaturated metal–organic framework Fe3(btc)2: formation of propylene oxide and competing reactions

The aerobic epoxidation of propylene over the metal–organic framework Fe₃(btc)₂ (btc = 1,3,5-benzentricarboxylate) as catalyst has been investigated by means of density functional calculations.

Theoretical study of CO2 hydrogenation into formic acid on Lewis acid zeolites

The hydrogenation of carbon dioxide (CO₂) to formic acid over Lewis acidic zeolites as catalyst has been investigated by means of density functional theory (DFT) with the M06-L functional.

Metal-organic and covalent organic frameworks as single-site catalysts

Heterogeneous single-site catalysts consist of isolated, well-defined, active sites that are spatially separated in a given solid and, ideally, structurally identical. In this review, the potential of metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) as platforms for the development of heterogeneous single-site catalysts is reviewed thoroughly. In the first part of this article, synthetic strategies and progress in the implementation of such sites in these two classes of materials are discussed. Because these solids are excellent playgrounds to allow a better understanding of catalytic functions, we highlight the most important recent advances in the modelling and spectroscopic characterization of single-site catalysts based on these materials. Finally, we discuss the potential of MOFs as materials in which several single-site catalytic functions can be combined within one framework along with their potential as powerful enzyme-mimicking materials. The review is wrapped up with our personal vision on future research directions.

A mechanistic study of ethanol transformation into ethene and acetaldehyde on an oxygenated Au-exchanged ZSM-5 zeolite

Ethanol transformation to ethene and acetaldehyde over low- and high-spin state oxygenated Au-exchanged ZSM-5 zeolite have been investigated by means of density functional calculations with the M06-L functional.

Theoretical study on the reaction mechanism of hydrogenation of furfural to furfuryl alcohol on Lewis acidic BEA zeolites: effects of defect structure and tetravalent metals substitution

We examined the catalytic roles of the defect structure and tetravalent-metal substitution on Lewis acidic BEA Zeolites for the furfural hydrogenation reaction using the DFT approach.

Epoxidation of ethylene over Pt-, Pd- and Ni-doped graphene in the presence of N2O as an oxidant: a comparative DFT study

The catalytic activities of Pt-, Pd-, and Ni-doped graphene nanosheets for the oxidation of ethylene to ethylene oxide by N₂O molecule are compared using the density functional theory calculations.