Photo and Thermo Dual-Responsive Copolymer Surfaces for Efficient Cell Capture and Release

Boosting the Cell Harvesting Performance of Poly(di(ethylene glycol)methyl ether methacrylate) Cell Release Layers via Copolymerization of Photo- and Thermoresponsive Monomers

The performance of the cell-selective thermoresponsive poly(di(ethylene glycol)methyl ether methacrylate) (PDEGMA) cell harvest system is shown to be drastically enhanced by exploiting the combination of photoresponsive spiropyran derivates and PDEGMA in copolymerized brushes. The analysis of copolymerized 1'-(2-methacryloxyethyl)-3',3'-dimethyl-6-nitrospiro(2H-1-benzopyran-2,2'-indoline) (SPMA) (DEMGA) di(ethylene glycol)methyl ether methacrylate brushes revealed that a minor adjustment of the SPMA/DEGMA ratios results in a significant alternation of wettability as well as protein adsorption, when switching the temperature from 37 to 22 °C and alternately irradiating using different light wavelengths (from 530 to 365 nm). Thin P(SPMA-co-DEGMA) layers supported pancreatic tumor PaTu 8988t cells with high cell viability. Copolymer layers with 2.5% SPMA/DEGMA led to the highest efficiency of enzyme-free cell release with very good cell viability. The release is induced by cooling the cell culture medium to 22 °C and irradiating the surface with 365 nm light. Compared to neat PDEGMA, the P(SPMA-co-DEGMA) layers showed a threefold increase in the speed of the change of cell morphology of the attached cells and a >5 times increased fraction of detached cells, which underlines the potential of these dual responsive PDEGMA systems for optimized performance in the facile capture, culture, and release of different cell lines.

Fabrication of electrospun nanofibrous thermoresponsive semi-interpenetrating poly(N-isopropylacrylamide)/polyvinyl alcohol networks containing ZnO nanoparticle mats: characterization and antibacterial and cytocompatibility evaluation

Thermoresponsive nanofiber composites comprising biopolymers and ZnO nanoparticles with controlled release and antibacterial activity are fascinating scientific research areas. Herein, poly(N-isopropylacrylamide) (PNIPAm) was prepared and mixed with poly(vinyl alcohol) (PVA) in 75/25 and 50/50 weight ratios together with ZnO (0, 1, and 2 phr) to construct nanofiber composites. The morphology of the crosslinked nanofiber composites, ZnO content, and their mechanical behavior were assessed by SEM, EDX, and tensile analyses. The wettability results show an increment in nanofiber surface hydrophobicity by increasing the temperature above the LCST of PNIPAm. The in vitro ZnO release exhibits a faster release profile for the sample with 50 wt% PNIPAm (lower crosslinking density) compared to the one with 25 wt%. Besides, a strong interaction between PVA hydroxyl groups and ZnO can restrict the release content. However, by increasing the temperature from 28 to 32 °C, the relative ZnO release becomes half for both compositions. All crosslinked nanofiber composites demonstrated reliable biocompatibility against L929 fibroblast cells. Agar disc-diffusion and optical density methods showed thermo-controllable antibacterial activity against Staphylococcus aureus upon temperature variation between 28 and 32 °C. Furthermore, in vivo and histological results indicate the potentiality of the prepared multidisciplinary wound dressing for robust wound healing and skin tissue engineering.

Capture and Release of Cancer Cells Through Smart Bioelectronics

Noninvasive collection of target cells such as circulating tumor cells (CTCs) is crucial for biology and medicine research. Conventional methods of cell collection are often complex, requiring either size-dependent sorting or invasive enzymatic reactions. Here, we show the development of a functional polymer film, which combines the thermoresponsive poly(N-isopropylacrylamide) and the conducting poly(3,4-ethylenedioxythiopene)/poly(styrene sulfonate), and its use for the capture and release of CTCs. When coated onto microfabricated gold electrodes, the proposed polymer films are capable of noninvasively capturing and controllably releasing cells while, at the same time, monitoring these processes with conventional electrical measurements.

Thermo-Responsive Jamming of Nanoparticle Dense Suspensions towards Macroscopic Liquid-Solid Switchable Materials

Nanoparticle aggregation for constructing functional materials has shown enormous advantages in various applications. Most efforts focused on ordered nanoparticle aggregation for specific functions but were often limited to irreversible aggregation processes due to the thermodynamic equilibrium. Herein, we report a reversible disordered aggregation of SiO₂ -PNIPAAm nanoparticles (SPNPs) through thermo-responsive jamming, obtaining smart liquid-solid switchable materials. The smart materials can display a switch between liquid-like state and solid-like state responding to a temperature change. This unique macroscopic behavior originates from the reversible disordered aggregation modulated by temperature-dependent hydrophobic interactions among the SPNPs. Notably, the materials at the solid-like state show anti-impact properties and can withstand the impact of a steel sphere with a speed of 328 cm s^-1 . We envision that this finding offers inspiration to design smart liquid-solid switchable materials for impact protection.

Prevent or Cure-The Unprecedented Need for Self-Reporting Materials

Self-reporting smart materials are highly relevant in modern soft matter materials science, as they allow for the autonomous detection of changes in synthetic polymers, materials, and composites. Despite critical advantages of such materials, for example, prolonged lifetime or prevention of disastrous material failures, they have gained much less attention than self-healing materials. However, as diagnosis is critical for any therapy, it is of the utmost importance to report the existence of system changes and their exact location to prevent them from spreading. Thus, we herein critically review the chemistry of self-reporting soft matter materials systems and highlight how current challenges and limitations may be overcome by successfully transferring self-reporting research concepts from the laboratory to the real world. Especially in the space of diagnostic self-reporting systems, the recent SARS-CoV-2 (COVID-19) pandemic indicates an urgent need for such concepts that may be able to detect the presence of viruses or bacteria on and within materials in a self-reporting fashion.

An electroactive and thermo-responsive material for the capture and release of cells

Non-invasive collection of target cells is crucial for research in biology and medicine. In this work, we combine a thermo-responsive material, poly(N-isopropylacrylamide), with an electroactive material, poly(3,4-ethylene-dioxythiopene):poly(styrene sulfonate), to generate a smart and conductive copolymer for the label-free and non-invasive detection of the capture and release of cells on gold electrodes by electrochemical impedance spectroscopy. The copolymer is functionalized with fibronectin to capture tumor cells, and undergoes a conformational change in response to temperature, causing the release of cells. Simultaneously, the copolymer acts as a sensor, monitoring the capture and release of cancer cells by electrochemical impedance spectroscopy. This platform has the potential to play a role in top-notch label-free electrical monitoring of human cells in clinical settings.

Responsive Hydrogel Microcarrier-Integrated Microneedles for Versatile and Controllable Drug Delivery

Stratagems of drug delivery are important for disease treatment and other biomedical areas. In this study, a novel stratagem is presented for versatile and controllable drug delivery by integrating photoresponsive drug delivery microspheres (PDDMs) into pyramid microneedle (MN) arrays. The PDDMs, containing black-phosphorus (BP) and poly (N-isopropylacrylamide) (pNIPAM), are generated by a flexible capillary microfluidic method. Benefiting from the high water content of the pNIPAM hydrogel, various bioactive substances can be loaded and maintain biological activity. Furthermore, due to the near-infrared (NIR) absorption and conversion capabilities of the contained BP, the PDDMs can increase temperature, shrink volume, and release their encapsulated bioactives under the trigger of biocompatible NIR. In addition, as the PDDMs are stuffed into the solid MN arrays of porous ethoxylated trimethylolpropane triacrylate (ETPTA), the composited PDDMs-MNs system has enough mechanical strength to penetrate into the skin and can deliver drugs underneath the skin uniformly. Based on the resultant PDDMs-MNs, it is demonstrated that insulin can be controllably released to adjust blood glucose levels of streptozotocin (STZ)-induced diabetic mice. Thus, it is believed that the PDDMs-MNs can act as an excellent drugs delivery system and will find many practical values in clinical medicine.

Spiropyran-based photoswitchable acrylic nanofibers: A stimuli-responsive substrate for light controlled C6 glioma cells attachment/detachment

Reversible and remote cell manipulation with high spatiotemporal precision is now a highly attractive subject in various biological applications such as tissue engineering and cell-matrix interaction. Herein, photoresponsive poly(methyl methacrylate-co-hydroxy ethyl methacrylate-co-spiropyran ethyl acrylate) terpolymer (MHSP) was prepared using emulsion polymerization and the corresponding nanofibers (MHSP@NF) and film (MHSP@F) were prepared using electrospinning and drop-casting techniques, respectively. Structure of MHSP@NF with cylindrical cross-section and uniform diameter size of 169 nm were characterized by ¹H-NMR and SEM analyses. Time-dependent UV-vis spectra of the prepared acrylic nanofibers and films demonstrated maximum forward photoisomerization after 3- and 8-min UV irradiation at 365 nm together with a 96° and 5° decrement in their surface water contact angles, respectively. High photoresponsivity of the nanofibers was attributed to their extensive surface area which exposes more spiropyran groups to UV light. MHSP@F and MHSP@NF with chemically-attached spiropyran groups demonstrated significant biocompatibility with negligible toxicity toward C6 glioma cancer cells up to 5 days. However, MH/SP@NF with doped SPOH exhibited a sudden decrease in cell viability relating to the migration and leakage of SPOH molecules. Photoreversible cell adhesion results showed a dramatic and switchable C6 cells attachment/detachment upon alternating UV and visible lights irradiations for MHSP@NF sample, while this was not observed for the similar film. These indicate potentiality of MHSP@NF as a promising substrate for dynamic switching of biomolecules and cell sheet engineering.

Synthesis of spiropyran with methacrylate at the benzopyran moiety and control of the water repellency and cell adhesion of its polymer film

Stimuli-responsive materials have been actively researched over the past few decades. Among such materials, spiropyran is one of the most attractive compounds because the structure and polarity of the material are dramatically changed after photo irradiation, unlike other materials. In this work, we designed and synthesized a spiropyran derivative (SpMA) with a methacryloyl group on the nitrobenzene ring of a spiropyran skeleton. The UV spectra of the newly synthesized SpMA showed the photo-isomerization of spiropyran. The maximum absorption wavelength (λmax) of SpMA was 616 nm in n-hexane, a nonpolar solvent, although λmax of SpMA was 532 nm in methanol, a polar protic solvent, which resulted in an 84 nm blue-shift. SpMA was successfully polymerized by ruthenium (Ru)-catalyzed living radical polymerization. Poly(SpMA) (PSpMA) was then spin-coated on a PET substrate in order to control the surface properties of water repellency and cell adhesion. The water repellency was decreased approximately 10° under UV irradiation, because of the polarity change of PSpMA caused by photo-isomerization from the spiropyran (SP) type to the merocyanine (MC) type. In addition, NIH3T3 cells were spread only on 6% of the surface of the PSpMA thin film after UV irradiation compared with no UV irradiation. The polarity change of PSpMA by photo-isomerization is also believed to be the reason for this behavior. As a result, we successfully synthesized a photo-controllable cell culture scaffold.

Recent advances in light-induced cell sheet technology

Various stimuli have been applied to harvest complete cell sheets, including temperature, magnetic, pH, and electrical stimuli. Cell sheet technology is a convenient and efficient approach with beneficial effects for tissue regeneration and cell therapy. Lights of different wavelengths, such as ultraviolet (UV), visible light, and near infrared ray (NIR) light, were confirmed to aid in fabricating a cell sheet. Changes in the wettability, potential, or water content of the culturing surfaces that occur under light illumination induce conformational changes in the adhesive proteins or collagens, which then leads to cell sheet detachment. However, the current approaches face several limitations, as few standards for safe light illumination have been proposed to date, and require a careful control of the wavelength, power, and irradiation time. Future studies should aim at generating new materials for culturing and releasing cell sheets rapidly and effectively.

Facile synthesis of 3D hierarchical micro-/nanostructures in capillaries for efficient capture of circulating tumor cells

The efficient capture of rare circulating tumor cells (CTCs) with high viability is of great importance in cancer diagnosis. The integration of three-dimensional (3D) nanobiointerfaces with capillary flow channel platforms can efficiently improve CTC capture performance by providing abundant binding sites and increasing the likelihood of contact as samples flow through the microchannels. However, due to the complex preparation processes, facile synthesis of nanostructures for use as substrates in flow channels for biomedical applications is still challenging. To reduce the encapsulation steps in the fabricating of nanostructured flow channel devices, we chose the enclosed glass capillaries as flow channels and accomplished all the experiments in the microchannels, including 3D nanostructure synthesis, surface modification and capture/release of CTCs. In this work, we constructed a novel 3D Zn(OH)F/ZnO nanoforest array in capillaries for CTC isolation via a facile microfluidic wet chemistry method. Because of the abundant binding sites of the 3D Zn(OH)F/ZnO nanoforest array, the capture efficiency was remarkably enhanced compared with that of vertical nanowires (90.3% vs 69.1%). In addition, a high release efficiency and cell viability of released cells were achieved by grafting poly(N-isopropylacrylamide) (PNIPPAm). These results may provide evidence for a novel method to fabricate hierarchical 3D substrates with a combination of biomolecule recognition and topographical interaction for biomedical applications.

Cell adhesion control by photoinduced LCST shift of PNIPAAm-based brush scaffolds

Cell adhesion was markedly regulated on spiropyran-containing PNIPAAm-based brush scaffolds by photoinduced LCST shift across a standard culture temperature.

Photo-Irresponsive Molecule-Amplified Cell Release on Photoresponsive Nanostructured Surfaces

Cell manipulation has raised extensive concern owing to its underlying applications in numerous biological situations such as cell-matrix interaction, tissue engineering, and cell-based diagnosis. Generally, light is considered as a superior candidate for manipulating cells (e.g., cell release) due to their high spatiotemporal precision and non-invasion. However, it remains a big challenge to release cells with high efficiency due to their potential limitation of the light-triggered wettability transition on photoresponsive surfaces. In this study, we report a photoresponsive spiropyran-coated nanostructured surface that enables highly efficient release of cancer cells, amplified by the introduction of a photo-irresponsive molecule. On one hand, structural recognition stems from topological interaction between nanofractal surfaces and the protrusions of cancer cells. On the other, molecular recognition can be amplified by a photo-irresponsive and hydrophilic molecule by reducing the steric hindrance of photoresponsive components and resisting nonspecific cell adhesion. Therefore, this study may afford a novel avenue for developing advanced smart materials for high-quality biological analysis and clinical diagnosis.

A new visible light and temperature responsive diblock copolymer

A visible light and temperature responsive diblock copolymer of poly[6-(2,6,2′,6′-tetramethoxy-4′-oxyazobenzene) hexyl methacrylate]-block-poly(N-isopropylacrylamide) (PmAzo-b-PNIPAM) was synthesized via RAFT polymerization by carefully tuning the polymerization conditions.