Low-cost LED-based Photo-CIDNP Enables Biocompatible Hyperpolarization of 19 F for NMR and MRI at 7 T and 4.7 T

In-Cell 19F NMR of Proteins: Recent Progress and Future Opportunities

In vitro, 19F NMR methodology is preferably selected as a complementary and straightforward method for unveiling the conformations, dynamics, and interactions of biological molecules. Its effectiveness in vivo has seen continuous improvement, addressing challenges faced by conventional heteronuclear NMR experiments on structured proteins, such as severe line broadening, low signal-to-noise ratio, and background signals. Herein, we summarize the distinctive advantages of 19F NMR, along with recent progress in sample preparation and applications within the realm of in-cell NMR. Additionally, we offer insights into the future directions and prospects of this methodology based on our understanding.

Detection of sub-nmol amounts of the antiviral drug favipiravir in 19F MRI using photo-chemically induced dynamic nuclear polarization

In biological tissues, 19F magnetic resonance (MR) enables the non-invasive, background-free detection of 19F-containing biomarkers. However, the signal-to-noise ratio (SNR) is usually low because biomarkers are typically present at low concentrations. Measurements at low magnetic fields further reduce the SNR. In a proof-of-principal study we applied LED-based photo-chemically induced dynamic nuclear polarization (photo-CIDNP) to amplify the 19F signal at 0.6 T. For the first time, 19F MR imaging (MRI) and spectroscopy (MRS) of a fully biocompatible model system containing the antiviral drug favipiravir has been successfully performed. This fluorinated drug has been used to treat Ebola and COVID-19. Since the partially cyclic reaction scheme for photo-CIDNP allows for multiple data acquisitions, averaging further improved the SNR. The mean signal gain factor for 19F has been estimated to be in the order of 103. An in-plane resolution of 0.39 × 0.39 mm2 enabled the analysis of spatially varying degrees of hyperpolarization. The minimal detectable amount of favipiravir per voxel was estimated to about 500 pmol. The results show that 19F photo-CIDNP is a promising method for the non-invasive detection of suitable 19F-containing drugs and other compounds with very low levels of the substance.

Organic Fluorine Compounds and Their Uses as Molecular MR-Based Temperature Sensors

The interest in fluorinated substances has increased significantly in recent decades due to their diverse properties and possible uses. An important analytical method in this context is NMR spectroscopy, which provides information on the structure as well as on intermolecular interactions or generally on changes in the environment of the nucleus under consideration. A physical quantity that is of great importance in most studies is temperature. However, this is not always easy, e. g. in shielded systems or within an organism. However, the application potential in chemical reactors or in medical diagnosis and therapy is very high and for this reason 13 fluorinated organic compound were chosen for a first 19 F NMR signal temperature sensitivity examination for determination of local temperatures in solution. Polyfluorinated molecules with separate 19 F MR signals are particularly suitable for temperature determination. Those can be serve as internal error-correcting thermometers without the need of a reference substance. Under these conditions, a 19 F MR signal shift of up to 0.03 ppm/K was detectable. Fluorine position and chemical environment were very important for the temperature sensitivity.

Lighting up spin systems: enhancing characteristic 1H signal patterns of fluorinated molecules

Fluorine is becoming increasingly prevalent in medicinal chemistry, both in drug molecules and in molecular probes. The presence of fluorine allows convenient monitoring of such molecules in complex environments by NMR spectroscopy. However, sensitivity is a persistent limitation of NMR, especially when molecules are present at low concentrations. Here, sensitivity issues with 1H NMR are mitigated by sharing 19F photochemically-induced dynamic nuclear polarisation with 1H nuclei. Unlike direct 1H enhancement, this method enhances 1H signals without significantly distorting multiplet intensities, and has the potential to enable the use of suitable molecules as low-concentration probes.

Magnetometer-Detected Nuclear Magnetic Resonance of Photochemically Hyperpolarized Molecules

Photochemically induced dynamic nuclear polarization (photo-CIDNP) enables nuclear spin ordering by irradiating samples with light. Polarized spins are conventionally detected via high-field chemical-shift-resolved NMR (above 0.1 T). In this Letter, we demonstrate in situ low-field photo-CIDNP measurements using a magnetically shielded fast-field-cycling NMR setup detecting Larmor precession via atomic magnetometers. For solutions comprising mM concentrations of the photochemically polarized molecules, hyperpolarized ¹H magnetization is detected by pulse-acquired NMR spectroscopy. The observed NMR line widths are about 5 times narrower than normally anticipated in high-field NMR and are systematically affected by light irradiation during the acquisition period, reflecting a reduction of the transverse relaxation time constant, T₂*, on the order of 10%. Magnetometer-detected photo-CIDNP spectroscopy enables straightforward observation of spin-chemistry processes in the ambient field range from a few nT to tens of mT. Potential applications of this measuring modality are discussed.

Spin Hyperpolarization in Modern Magnetic Resonance

Magnetic resonance techniques are successfully utilized in a broad range of scientific disciplines and in various practical applications, with medical magnetic resonance imaging being the most widely known example. Currently, both fundamental and applied magnetic resonance are enjoying a major boost owing to the rapidly developing field of spin hyperpolarization. Hyperpolarization techniques are able to enhance signal intensities in magnetic resonance by several orders of magnitude, and thus to largely overcome its major disadvantage of relatively low sensitivity. This provides new impetus for existing applications of magnetic resonance and opens the gates to exciting new possibilities. In this review, we provide a unified picture of the many methods and techniques that fall under the umbrella term "hyperpolarization" but are currently seldom perceived as integral parts of the same field. Specifically, before delving into the individual techniques, we provide a detailed analysis of the underlying principles of spin hyperpolarization. We attempt to uncover and classify the origins of hyperpolarization, to establish its sources and the specific mechanisms that enable the flow of polarization from a source to the target spins. We then give a more detailed analysis of individual hyperpolarization techniques: the mechanisms by which they work, fundamental and technical requirements, characteristic applications, unresolved issues, and possible future directions. We are seeing a continuous growth of activity in the field of spin hyperpolarization, and we expect the field to flourish as new and improved hyperpolarization techniques are implemented. Some key areas for development are in prolonging polarization lifetimes, making hyperpolarization techniques more generally applicable to chemical/biological systems, reducing the technical and equipment requirements, and creating more efficient excitation and detection schemes. We hope this review will facilitate the sharing of knowledge between subfields within the broad topic of hyperpolarization, to help overcome existing challenges in magnetic resonance and enable novel applications.

Sample illumination device facilitates in situ light-coupled NMR spectroscopy without fibre optics

In situ illumination of liquid-state nuclear magnetic resonance (NMR) samples makes it possible for a wide range of light-dependent chemical and biological phenomena to be studied by the powerful analytical technique. However, the position of an NMR sample deep within the bore of the spectrometer magnet renders such illumination challenging. Here, we demonstrate the working principles of a sample illumination device (NMRtorch) where a lighthead containing an LED array is positioned directly at the top of an NMRtorch tube which is inserted into the NMR spectrometer. The wall of the tube itself acts as a light guide, illuminating the sample from the outside. We explore how this new setup performs in a number of photo-NMR applications, including photoisomerisation and photo-chemically induced dynamic nuclear polarisation (photo-CIDNP), and demonstrate the potential for ultraviolet (UV) degradation studies with continuous online NMR assessment. This setup enables users of any typical liquid-state spectrometer to easily perform in situ photo-NMR experiments, using a wide range of wavelengths.

Single Fluorinated Agent for Multiplexed 19 F-MRI with Micromolar Detectability Based on Dynamic Exchange

The weak thermal polarization of nuclear spins limits the sensitivity of MRI, even for MR-sensitive nuclei as fluorine-19. Therefore, despite being the source of inspiration for the development of background-free MRI for various applications, including for multiplexed imaging, the inability to map very low concentrations of targets using ¹⁹ F-MRI raises the need to further enhance this platform's capabilities. Here, we employ the principles of CEST-MRI in ¹⁹ F-MRI to obtain a 900-fold signal amplification of a biocompatible fluorinated agent, which can be presented in a "multicolor" fashion. Capitalizing on the dynamic interactions in host-guest supramolecular assemblies in an approach termed GEST, we demonstrate that an inhalable fluorinated anesthetic can be used as a single ¹⁹ F-probe for the concurrent detection of micromolar levels of two targets, with potential in vivo translatability. Further extending GEST with new designs could expand the applicability of ¹⁹ F-MRI to the mapping of targets that have so-far remained non-detectable.

Photochemically Induced Dynamic Nuclear Polarization of Heteronuclear Singlet Order

Photochemically induced dynamic nuclear polarization (photo-CIDNP) is a method to hyperpolarize nuclear spins using light. In most cases, CIDNP experiments are performed in high magnetic fields and the sample is irradiated by light inside a nuclear magnetic resonance (NMR) spectrometer. Here we demonstrate photo-CIDNP hyperpolarization generated in the Earth's magnetic field and under zero- to ultralow-field (ZULF) conditions. Irradiating a sample containing tetraphenylporphyrin and para-benzoquinone for several seconds with light-emitting diodes produces strong hyperpolarization of ¹H and ¹³C nuclear spins, enhancing the NMR signals more than 200 times. The hyperpolarized spin states at the Earth's field and in ZULF are different. In the latter case, the state corresponds to the singlet order between scalar-coupled ¹H-¹³C nuclear spins. This state has a longer lifetime than the state hyperpolarized at Earth's field. The method is simple and cost-efficient and should be applicable to many molecular systems known to exhibit photo-CIDNP, including amino acids and nucleotides.

Fast-pulsing LED-enhanced NMR: A convenient and inexpensive approach to increase NMR sensitivity

Low-concentration photochemically induced dynamic nuclear polarization (LC-photo-CIDNP) has recently emerged as a powerful technology for the detection of aromatic amino acids and proteins in solution in the low-micromolar to nanomolar concentration range. LC-photo-CIDNP is typically carried out in the presence of high-power lasers, which are costly and maintenance-heavy. Here, we show that LC-photo-CIDNP can be performed with light-emitting diodes (LEDs), which are inexpensive and much less cumbersome than lasers, laser diodes, flash lamps, or other light sources. When nuclear magnetic resonance (NMR) sample concentration is within the low-micromolar to nanomolar range, as in LC-photo-CIDNP, replacement of lasers with LEDs leads to no losses in sensitivity. We also investigate the effect of optical-fiber thickness and compare excitation rate constants of an Ar ion laser (488 nm) and a 466 nm LED, taking LED emission bandwidths into account. In addition, importantly, we develop a novel pulse sequence (¹³C RASPRINT) to perform ultrarapid LC-photo-CIDNP data collection. Remarkably, ¹³C RASPRINT leads to 4-fold savings in data collection time. The latter advance relies on the fact that photo-CID nuclear hyperpolarization does not suffer from the longitudinal-relaxation recovery requirements of conventional NMR. Finally, we combine both the above improvements, resulting in facile and rapid (≈16 s-2.5 min) collection of 1 and 2D NMR data on aromatic amino acids and proteins in solution at nanomolar to low micromolar concentration.

Combination of illumination and high resolution NMR spectroscopy: Key features and practical aspects, photochemical applications, and new concepts

In the last decade, photochemical and photocatalytic applications have developed into one of the dominant research fields in chemistry. However, mechanistic investigations to sustain this enormous progress are still relatively sparse and in high demand by the photochemistry community. UV/Vis spectroscopy and EPR spectroscopy have been the main spectroscopic tools to study the mechanisms of photoreactions due to their higher time resolution and sensitivity. On the other hand, application of NMR in photosystems has been mainly restricted to photo-CIDNP, since the initial photoexcitation was thought to be the single key to understand photoinduced reactions. In 2015 the Gschwind group showcased the possibility that different reaction pathways could occur from the same photoexcited state depending on the reaction conditions by using in situ LED illumination NMR. This was the starting point to push the active participation of NMR in photosystems to its full potential, including reaction profiling, structure determination of intermediates, downstream mechanistic studies, dark pathways, intermediate sequencing with CEST etc. Following this, multiple studies using in situ illumination NMR have been reported focusing on mechanistic investigations in photocatalysis, photoswitches, and polymerizations. The recent increased popularity of this technique can be attributed to the simplicity of the experimental setup and the availability of low cost, high power LEDs. Here, we review the development of experimental design, applications and new concepts of illuminated NMR. In the first part, we describe the development of different designs of NMR illumination apparatus, illuminating from the bottom/side/top/inside, and discuss their pros and cons for specific applications. Furthermore, we address LASERs and LEDs as different light sources as well as special cases such as UVNMR(-illumination), FlowNMR, NMR on a Chip etc. To complete the discussion on experimental apparatus, the advantages and disadvantages of in situ LED illumination NMR versus ex situ illumination NMR are described. The second part of this review discusses different facets of applications of inside illumination experiments. It highlights newly revealed mechanistic and structural information and ideas in the fields of photocatalyis, photoswitches and photopolymerization. Finally, we present new concepts and methods based on the combination of NMR and illumination such as sensitivity enhancement, chemical pump probes, experimental access to transition state combinations and NMR actinometry. Overall this review presents NMR spectroscopy as a complementary tool to UV/Vis spectroscopy in mechanistic and structural investigations of photochemical processes. The review is presented in a way that is intended to assist the photochemistry and photocatalysis community in adopting and understanding this astonishingly powerful in situ LED illumination NMR method for their investigations on a daily basis.

Low-cost LED-based Photo-CIDNP Enables Biocompatible Hyperpolarization of 19 F for NMR and MRI at 7 T and 4.7 T

Substrates containing ¹⁹ F can serve as background-free reporter molecules for NMR and MRI. However, in vivo applications are still limited due to the lower signal-to-noise ratio (SNR) when compared with ¹ H NMR. Although hyperpolarization can increase the SNR, to date, only photo-chemically induced dynamic nuclear polarization (photo-CIDNP) allows for hyperpolarization without harmful metal catalysts. Photo-CIDNP was shown to significantly enhance ¹⁹ F NMR signals of 3-fluoro-DL-tyrosine in aqueous solution using flavins as photosensitizers. However, lasers were used for photoexcitation, which is expensive and requires appropriate protection procedures in a medical or lab environment. Herein, we report ¹⁹ F MR hyperpolarization at 4.7 T and 7 T with a biocompatible system using a low-cost and easy-to-handle LED-based set-up. First hyperpolarized ¹⁹ F MR images could be acquired, because photo-CIDNP enabled repetitive hyperpolarization without adding new substrates.